Otimização de parâmetros mecânicos e microestruturais dos moldes em areia de sílica ligados quimicamente pelo processo de cura a frio em fundição de aço

Surface defects on steel parts borne costs of smelting industries due to the need of rework. Sand molds are frequently used in foundry industries and largely responsible for providing surface defects. This study aims to optimize the levels of the molding process variables to minimize the occurrence of surface defects in steel castings in silica sand molds chemically linked by cold cure process. The methodology used the experimental design with split plot, being considered in the study the resin percentage factors in the mold formulation, addition of iron oxide, type of paint, the paint application method, amount of ink layers, use of hot air along the lines and waiting time of the mold before casting. They were analyzed as response variables erosion defects, sand inclusion, penetration, porosity and surface finish. Tensile strength tests were performed to evaluate the influence of factors on mechanical parameters and the microstructural parameters were carried out the analysis of X-ray diffraction, scanning electron microscopy (SEM) and thermal analysis (TG / DSC / dilatometry). The results elucidate that for the faulty erosion, the only significant factor with a 95% confidence level was the type of ink and the ink alumina-based superior results obtained. For the sand inclusion of defect, there were three significant factors, with best results obtained with alumina-based paint and spray applied using hot air in the mold before casting the metal. For the defect penetration, there were four significant factors, the best results being achieved with 0.8% of resin and addition of iron oxide in the molding formulation, the paint being applied by brush and standby time of 24 hours before leak. For the defect porosity with a 95% confidence level, no significant factors. For the defect surface finish, the best results were achieved with the 0.8% formulation of the resin in the mold and application of the paint brush. To obtain the levels of the factors that optimize all defects simultaneously, we performed a weighted average of the results of each type of fault, concluding that the best levels of the factors were: 0.8% resin and addition of iron oxide in the formulation of the template, application of two coats of paint applied with a brush or spray, using hot air in the mold before casting and 24 hours of waiting ready the mold before casting. These levels of the optimized factors were used in an experiment to confirm that ratified the results, helping to reduce rework and consequently reducing costs of cast steel parts.

Correlação entre força muscular do assoalho pélvico, função sexual e qualidade de vida em mulheres de meia idade

Introduction: Menopause is characterized by the depletion of ovarian follicles and the gradual decline in estradiol levels, which ends with the definitive cessation of menstrual periods (menopause). As a result of hypoestrogenism, characteristic symptoms, such as hot flashes, night sweats, vaginal dryness, dyspareunia, insomnia, mood swings and depression can be observed. There is also the weakening of the pelvic floor muscles (MAP) as a result of progressive muscle-aponeurotic and connective atrophy with consequent decreased sexual function. Objective: To evaluate the strength of MAP, sexual function and quality of life of menopausal women. Methodology: This is an observational, analytical, cross-sectional design. The sample consisted of 55 women (35 postmenopausal and 20 perimenopausal), aged between 40 and 65, who were assessed by muscle strength and perineometry test. For the assessment of sexual function and quality of life, used the Female Sexual Function Index (FSFI) and Utian Quality of Life (UQOL), respectively. Statistical analysis was performed using Pearson's correlation and multivariate analysis. Results: The mean age was 52.78 (± 6.47 years). Sexual dysfunction presented, 61.8% of participants (43.62% of postmenopausal and perimenopausal 18.17%). Muscle strength test and the maximum perineometry had a median of 3.00 (Q25: 2 e Q75: 4) and 33,50 cmH20 (Q25: 33,5 e Q75: 46,6), respectively. No correlation was found between sexual function and muscle strength (r = 0.035; p = 0.802) and between sexual function and perineometry (r = 0.126; p = 0.358). The mean total score of UQOL was 74.45 (± 12.23). Weak positive correlation was found between sexual function and quality of life (r = +0.422 p = 0.001). Multivariate analysis identified associations between sexual function and variables: quality of life, climacteric symptoms, physical activity and education level. Conclusions: These results suggest that the climacteric symptoms, quality of life, physical activity and level of education are associated with sexual function in menopausal women. However, the muscular component of sexual function needs to be further investigated in this context.

Avaliação e correções de testes de hipóteses em modelos de sobrevivência com fração de cura

Survival models deals with the modelling of time to event data. In certain situations, a share of the population can no longer be subjected to the event occurrence. In this context, the cure fraction models emerged. Among the models that incorporate a fraction of cured one of the most known is the promotion time model. In the present study we discuss hypothesis testing in the promotion time model with Weibull distribution for the failure times of susceptible individuals. Hypothesis testing in this model may be performed based on likelihood ratio, gradient, score or Wald statistics. The critical values are obtained from asymptotic approximations, which may result in size distortions in nite sample sizes. This study proposes bootstrap corrections to the aforementioned tests and Bartlett bootstrap to the likelihood ratio statistic in Weibull promotion time model. Using Monte Carlo simulations we compared the nite sample performances of the proposed corrections in contrast with the usual tests. The numerical evidence favors the proposed corrected tests. At the end of the work an empirical application is presented.

Modelos flexíveis de sobrevivência com fração de cura: implementação computacional

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Efeito da idade materna sobre os resultados perinatais

Objetivo: analisar a relação entre a idade materna e a ocorrência de resultados perinatais adversos na população do Rio Grande do Norte. Métodos: foram analisados os registros oficiais de 57.088 nascidos vivos no Estado do Rio Grande do Norte no ano de 1997. Os dados foram obtidos do Sistema de Informação sobre Nascidos Vivos do Ministério da Saúde. A população estudada foi dividida em Grupos I, II e III, segundo a faixa etária materna: 10 a 19, 20 a 34 e 35 anos ou mais, respectivamente. As variáveis analisadas foram: duração da gestação, peso ao nascer e tipo de parto. A análise estatística foi realizada utilizando-se o teste c2. Resultados: observamos uma maior incidência de parto pré-termo no Grupo I (4,3 %), em comparação ao Grupo II (3,7%) (p = 0,0028). A taxa de cesariana foi menor nos Grupos I e III, em comparação ao Grupo II (p<0,0001). Evidenciamos freqüência significativamente maior de recém-nascidos de baixo peso nos Grupos I (8,4%) e III (8,3%), quando comparados ao Grupo II (6,5%) (p<0,0001). Conclusões: a gravidez nos extremos da vida reprodutiva esteve associada com maior freqüência de parto pré-termo e baixo peso ao nascer, entretanto, com relação ao tipo de parto, foi observada maior freqüência de parto normal do que no grupo de gestantes com idade entre 20 e 34 anos

O idoso e as ações sociais em prol desse grupo etário: um estudo sobre a qualidade de vida na Terceira Idade e o Projeto Saúde e Cidadania na Melhor Idade

The present study regards an applied qualitative social research (descriptive) which approaches the matter between old age and Brazilian social actions performed in social projects, aiming a qualified life and citizenship for this group of age. The objective of the study is to evaluate the contribution of Project Health and Citizenship in Old Age regarding social actions from the government directed to old age individual treatment for life quality improvement. The theoretical fundamentals of this work is, in a first moment, about old age and certain existing theories about aging process, as well as the differences and perspectives that come up throughout this process. In a second moment, some reflections are developed about the relation between life quality and leisure regarding old age, with the conception and historical rescue about these questions, as well as the evidence of leisure as an instrument of well-being feasibility and a better life quality in old age. Then the study contextualizes Brazilian government treatment to old age individuals, cutting off the Constitution of Republic from 1988 and some social attitudes taken by the government in a try to reach this specific group. Finally, the study presents the Project Health and Citizenship in Old Age , as a social program which belongs to extension activities from Federal Center of Technological Education of Rio Grande do Norte (CEFET-RN), which aims old age treatment and their citizenship and life quality. After the application of a semi-structured interview using the technique of Analysis of content for the Analysis and Discussion of Results, it is possible to conclude that the Project Health and Citizenship in Old Age fulfils its objective regarding contribution, through offered leisure activities, for old age well-being and life quality improvement. Hence, on this regard, it is possible to observe the importance and value of government actions, social projects and programs assisting old age individuals, for they are able to provide this group the opportunity to live out activities that allow their citizenship and socialization, regarding well-being and life quality improvement.