66 resultados para Hidroxiapatita sintética
Resumo:
This study investigated the influence of the molar ratio, the phosphorus initial concentration, the mixture gradient, mixing time, pH and the secondary nucleation on struvite s crystallization in synthetic water in batch reactors. The study was divided into two stages. The first investigated struvite s crystallization at different Mg:N:P molar ratios and at different initial concentrations of magnesium, nitrogen and phosphorus. It was also evaluated the importance of secondary nucleation on the struvite s crystallization. In the second, five parameters were tested to evaluate their influence on the struvite s crystallization, which were: Mg:N:P molar ratio, initial concentration of phosphate, mixing time, mixture gradient and pH. The best conditions for struvite s crystallization were: Mg:N:P = 1,3:1:1 molar ratio; mixture gradient = 60 rpm, pH = 10.0, mixing time = 5 minutes and high initial concentrations of the constituent ions of struvite. Furthermore, the use of struvite crystals as seed influenced positively on the struvite s crystallization
Resumo:
Piranhas-Açu basin is a Federal watershed with a drainage area of 43.681,5 km2, sited at Brazilian northeast semi arid, with 60% of your area in Paraiba State and 40% in Rio Grande do Norte State. The main river, Piranhas-Açu, has strategic importance for development of these states, because it s an essential source for many socio-economics activities developed along watercourse. The river s reach between Coremas-Mãe D`água Dam and Armando Ribeiro Gonçalves Dam has many irrigation projects, and supply many riverside cities. All this activities practiced in this river s reach consumes high water volumes. Due the importance of this stream and the necessity of an adequate management, this work aims for an impartial and detailed evaluation of real water supply conditions in this river s reach, by the application of hydrological modeling, including the arrangement of main dams in tributaries, and storage reservoir water balance. The rainfall-discharge model s applied in each sub-basins it was selected the model MODHISA- Hydrological Model of Semi Arid, that is a concentrated model with easy application. The simulation produced 50 years of inflows into the reservoirs, for which, were constructed the guaranties curves; and produced 50 years of synthetic discharge data in relevant points on the river and on its affluents; so it was constructed the permanence curves. Confronting the available discharge with the current and futures volumes of raw water captured in this river s reach, it was verified that de demands have high guaranties. This work concluded that the MODHISA Model is suitable to reproduce the hydrologic characteristics of Piranhas-Açu sub-basins, and showing good results
Resumo:
This body of work aims to describe and analyze the behavior of the Aí specificity marker of indefinite Noun Phrases (NP), one of the many functions this linguistic item is developing in contemporary Brazilian Portuguese. From the Functional Linguistic theory perspective, the North American declivity, this project intends to outline the possible grammaticalization trajectory taken by the Aí specificity marker. It will be followed from its function as a spatial deitic up to its integration of indefinite NP, and the action of the fundamental principles of the theory, such as iconicity and informativity, will be observed on the use of this item. Following this, Aí specificity marker behavior will be described in respect to various linguistic and social factors: type of text where the occurrence is encountered, language modality in which the latter is produced, syntactic function developed by the NP specified by Aí , the existence or lack of material intervening between Aí and the NP nuclear noun, informational status of the NP adjugated to Aí , and finally, sex, education and age of the speaker. The occurrence of conversational implicatures will also be verified (GRICE, 1982) within the contexts of Aí specificity marker use. Reflections on the teaching of grammar will be made, as well as on the possibility and validity of working with noun phrase specificity markers in elementary and high school Portuguese language classes. The data used in this research project stem from Corpus Discurso & Gramática A língua falada e escrita na cidade do Natal (FURTADO DA CUNHA, 1998), and from Corpus Discurso & Gramática A língua falada e escrita na cidade do Rio de Janeiro (VOTRE; OLIVEIRA, 1995)
Resumo:
In this work, we study the types of paraphrases used by the students of the Language and Literature Course when they reformulate a source text in the theoretical section of the monographs produced as texts for the conclusion of the course. Our main goal is to know how the process of textual reformulation takes place in the production of the monographic gender. From the used theoretical orientation (Fuchs,1982; 1994; Charaudeau and Maingueneau, 2006; Fávero et al, 2007; Hilgert, 1997, 2002, 2006; among others) we have worked with the paraphrase notion as an activity of discoursive reformulation, considering as the basic groundings the situation of communication and the subjects, or the wider context. In a more specific way, we have considered that the paraphrase performs alterations in the formal level, in the semantic level and in the functional level. Besides that, we sought to articulate the practice of paraphrasing to the gender of discourse in which it appears and to the contextual implications involved in the producing of the gender in question, and in doing so we were grounded in Baktin´s (2003) and Maingueneau´s (1998; 2001) postulates. For the analysis of the corpus that consists of 19 monographs, we have used the three categories defined by Hilgert (2002, 2006):expansion, condensation and parallelism as a way of identifying, describing and characterizing the types of paraphrases used by the students who produced the monographs when they take up Travaglia´s (1996) text about the language conceptions. The results show that the use of the paraphrastic parallelism (with 69.45 % in relation to only 18.41% of condensation and 12.13 % of expansion) was the most recurrent in the reformulations performed by the students who produced the monographs and this manifestation was characterized mainly by the lexical-semantic repetition of fragments of the source text. We have concluded that the high incidence of paraphrastic parallelism is an indication that the student does not have a command of the ways of production and circulation of the discoursive genders uttered in the academic-scientific realm
Resumo:
This present work has as objective to analyze the interpretation of the syntactic and semantic meaning performed by third graders in the nominal groups (NGs) with attributive adjectives in the English language in a text of the final exam in the ESP (English for Specific Purposes) discipline. The corpus is made up of 30 exams of two classes from a third grade institution of the biomedical area, corresponding to the basic and advanced levels of the second term in 2006. The text has 24 NGs of different lexical content, a total of 27 NGs in the whole text summing up to 810 analyzed occurrences. The analysis is carried out at the morphologic, syntactic and semantic levels using as theoretical background the traditional and functional grammars (QUIRK et al, 1985; CELSE-MURCIA et al, 1998; TUCKER, 1998), in their semantic aspects, the Semantics (FRAWLEY, 1992) and the Cognitive Linguistics (TAYLOR, 2002). We concluded that the main difficulties were due to the lack of vocabulary and to the use of mother tongue strategies instead of using the top-down strategies for reading a text in English to compensate this gap. We also observed that even when the vocabulary was known, there were difficulties in establishing the semantic and syntactic relations between modifier and noun head. We suggested improvements for the teaching of reading English texts at the third grade grounded in the obtained results such as a more comprehensive study of the several different morphologic and syntactic structures of the NGs with premodifiers and their semantic consequences, an approach of the morphologic, syntactic and semantic aspects of the NGs and the use of both top-down and bottom-up strategies when reading a NG in the English language
Resumo:
This paper attempts to investigate the discourse manifestations of the grammatical relation direct object with respect to the syntactic, semantic and pragmatic properties that underlie this element. The research adopts theoretical orientation of the functionalism from North American and Brazilian schools inspired in Givón (1995, 2001), Hopper and Thompson (1980), Chafe (1979), Furtado da Cunha, Oliveira, Martelotta (2003) inter alia. From functionalism, the research uses principles of iconicity, markedness and informativity and it analize categories of transitivity, grounding and animacy. This research is anchored in prototype model (TAYLOR 1995); construction grammar model (GOLDBERG 1996, 2002). Both theoretical orientations share the view that language is a malleable living organism subject to socio-cultural context. Grammar is then the result of created, maintained, and systematized linguistic patterns developed from and used for language use. According to a functional linguistics and cognitivist linguistics verbs are stored in the speakers lexicon in syntactic-semantic frames which are more frequent. These frames carry information concerning obligatory and optional arguments and the semantic roles these arguments take in the clause. The analysis focuses on the semantic type of the verbs and its relationship with the argument encoded as a direct object observing the aspectual nature of verbs. Direct objects are classified according to their morphology (lexical or pronominal noun phrase), semantic role, informational content and animacy. This study discusses pedagogical implications with relation to how the grammatical concepts touched on this paper are treated in school textbooks. The empirical data come from Corpus Discurso & Gramática: a língua falada e escrita na cidade do Natal (FURTADO DA CUNHA, 1998). This corpus is composed of texts that contain spoken and written modalities. These modalities are in turn organized according to different types: personal narratives, retold narrative, description of preferred place, procedural place, procedural description and report on argumentation. The sample data totals 40 texts produced by four language consultants of the last graduation date. The paper shows that the same syntactic structures (formed through Subject-Verb-Object) correspond to different semantic-pragmatic structures in relation to specific communicative purposes even verb is an event, process or state. The argument structure are not aleatory but are related to experience; that is the way humans conceptualize the world and talk about it
Resumo:
In the light of the Functional Linguistic Theory, in its North-American version (HOPPER, 1987, 1991, 1998, 2008, 2010; GIVÓN, 2001; LEHMANN, 2002; HOPPER; TRAUGOTT, 2003; FURTADO DA CUNHA; OLIVEIRA; MARTELOTTA, 2003, among others), the general objective of this research is to demonstrate, based on morphosyntactic and semantic-pragmatic properties, that AQUI (HERE), AÍ, ALI and LÁ (THERE) are part of an emerging paradigm in Brazilian Portuguese recently constituted and still developing of forms indicating specificity in indefinite noun phrases (NP). The data that make up the corpus of this research were collected in the following large Brazilian oral corpora: the Corpus Discurso & Gramática: a língua falada e escrita na cidade de Natal (FURTADO DA CUNHA, 1998), the Banco Conversacional de Natal (FURTADO DA CUNHA, 2010), the Projeto Variação Linguística no Estado da Paraíba VALPB (HORA, 2005) and the Projeto Variação Linguística Urbana na Região Sul do Brasil VARSUL (VANDRESEN, 2002). Firstly, the behavior of the specificity markings AQUI, AÍ, ALI and LÁ is described with respect to many factors of morphosyntactic and semantic-pragmatic nature: type of construction in which the markers appeared; existence or not of intervening material between the specificity marker item and the NP s nuclear noun; type of noun to which AQUI, AÍ, ALI and LÁ are linked; syntactic function of the specified SN; informational status of the NP to which the specificity markers AQUI, AÍ, ALI and LÁ are attached; occurrence of conversational implicatures (GRICE, 1982) in the context of use of these specificity markers. Next, a possible grammaticalization trajectory is outlined, according to which AQUI, AÍ, ALI and LÁ would had gone from an early spatial deictic indication to the specificity indication. The results point to the existence of forms with varying degree of emergence in this new paradigm of nominal specification, with AÍ being, probably, the item most grammaticalized, followed by LÁ, then ALI and AQUI, which permanence in the paradigm do not yet appear to be consolidated
Resumo:
In this work, electrochemical technology was used to treat synthetic wastewater containing Methyl Red (MR) and Blue Novacron (BN) by anodic oxidation using anodes platinum (Pt) and real samples of textile effluents using DDB anodes and platinum (Pt). The removal of color from the galvanostatic electrolysis of synthetic wastewater MR and BN, and the actual sample has been observed under different conditions (different current densities and temperature variation). The investigation of these parameters was performed in order to establish the best conditions for removal of color and chemical oxygen demand (BOD). According to the results obtained in this study, the electrochemical oxidation processes suitable for the degradation process of color and COD in wastewater containing such textile dyes, because the electrocatalytic properties of Pt and BDD anodes consumption energy during the electrochemical oxidation of synthetic solutions AN and MR and real sample, mainly depend on the operating parameters of operation, for example, the synthetic sample of MR, energy consumption rose from 42,00kWhm-3 in 40 mAcm-2 and 25 C to 17,50 kWhm-3 in 40mAcm-2 and 40 C, from the BN went 17,83 kWhm-3 in 40mAcm and 40°C to 14,04 kWhm- 3 in 40mAcm-2 and 40 C (data estimated by the volume of treated effluent). These results clearly indicate the applicability of electrochemical treatment for removing dyes from synthetic solutions and real industrial effluents
Resumo:
Modified polyacrylamides with ≅ 0.2 mol % of N,N-dihexylacrylamide and hydrolysis degree from 0 to 25 % were synthesized by micellar copolymerization. The hydrophobic monomer was obtained by the reaction between acryloyl chloride and N,Ndihexylamine and characterized by infrared (IR) and proton nuclear magnetic resonance (1H NMR) spectroscopy. The polymer molecular structures were determined through 1H and 13C NMR spectroscopy and the polymers were studied in dilute and semi-dilute regimes by viscometry, rheometry, static light scattering and photon correlation spectroscopy, at the temperature range from 25 to 55 ºC. The data obtained by viscometry showed that the intrinsic viscosity from the hydrolyzed polymers is larger than the precursor polymers at the same ionic strength. The comparison between the charged polymers showed that the polymer with higher hydrolysis degree has a more compact structure in formation water (AFS). The increase of temperature led to an enhanced reduced viscosity to the polymers in Milli-Q water (AMQ), although, in brine, only the unhydrolyzed polymer had an increase in the reduced viscosity with the temperature, and the hydrolyzed derivatives had a decrease in the reduced viscosity. The static light scattering (SLS) analyses in salt solutions evidenced a decrease of weight-average molecular weight (⎯Mw) with the increase of the hydrolysis degree, due to the reduction of the thermodynamic interactions between polymer and solvent, which was evidenced by the decrease of the second virial coefficient (A2). The polymers showed more than one relaxation mode in solution, when analyzed by photon correlation spectroscopy, and these modes were attributed to isolated coils and aggregates of several sizes. The aggregation behavior depended strongly on the ionic strength, and also on the temperature, although in a lower extension. The polymers showed large aggregates in all studied conditions, however, their solutions did not displayed a good increase in water viscosity to be used in enhanced oil recovery (EOR) processes
Resumo:
This work aims to detect polycyclic aromatic hydrocarbons (PAHs) through optimized analytical techniques, such as gas chromatography with flame-ionisation detector (CGFID), gas chromatography coupled to mass spectrometry (CGMS), Fluorescence Spectroscopy of Molecular and Purpot of oils and greases (POG). Apply to chemometrics, Factorial Planning 23, in the preparation of samples by liquid-liquid extraction. The sample preparation was used for liquid-liquid extraction and factors in this sample was used for the application of factorial planning 23, such as the use of ultrasound, solvents (dichloromethane, hexane and chloroform) and ratio of solvent / synthetic sample. These factors were assigned two types of levels: positive and negative. It was used to form the cube to better analyze the answers. The responses of the eight combinations were obtained in reading the spectrofluorimetric. The optimization of equipment were used, and they served in the HPA's identification of the samples collected in Rio Potengi. The optimization of the equipment was observed every 16's and PAH in the samples was found that the HPA's came from contamination of the Rio Potengi. The contamination comes through organic household waste, hospital waste, and among other contamination that comes from industries that are installed around the River The factorial design of high validity, it was observed a more effective sample preparation. The factorial design of liquid-liquid extraction showed a way to spend less solvent in less time using an ideal solvent, but also a way to extract more analyte from the matrix itself is water. In planning a smaller form factor extraction was the use of ultrasound, the ratio 1:3 corresponding to a solvent and sample 3 and the best solvent was dichloromethane who presented a viable extraction, not discarding the possibility of using also the hexane. The chloroform and may be toxic not had a good extraction
Resumo:
Enzymatic synthesis of peptides using proteases has attracted a great deal of attention in recent years. One key challenge in peptide synthesis is to find supports for protease immobilization capable of working in aqueous medium at high performance, producing watersoluble oligopeptides. At present, few reports have been described using this strategy. Therefore, the aim of this thesis was to immobilize proteases applying different methods (Immobilization by covalent bound, entrapment onto polymeric gels of PVA and immobilization on glycidil metacrylate magnetic nanoparticles) in order to produce water-soluble oligopeptides derived from lysine. Three different proteases were used: trypsin, α-chymotrypsin and bromelain. According to immobilization strategies associated to the type of protease employed, trypsin-resin systems showed the best performance in terms of hydrolytic activity and oligopeptides synthesis. Hydrolytic activities of the free and immobilized enzymes were determined spectrophotometrically based on the absorbance change at 660 nm at 25 °C (Casein method). Calculations of oligolysine yield and average degree of polymerization (DPavg) were monitored by 1H-NMR analysis. Trypsin was covalently immobilized onto four different resins (Amberzyme, Eupergit C, Eupergit CM and Grace 192). Maximum yield of bound protein was 92 mg/g, 82 mg/g and 60 mg/g support for each resin respectively. The effectiveness of these systems (Trypsin-resins) was evaluated by hydrolysis of casein and synthesis of water-soluble oligolysine. Most systems were capable of catalyzing oligopeptide synthesis in aqueous medium, albeit at different efficiencies, namely: 40, 37 and 35% for Amberzyme, Eupergit C and Eupergit CM, respectively, in comparison with free enzyme. These systems produced oligomers in only 1 hour with DPavg higher than free enzyme. Among these systems, the Eupergit C-Trypsin system showed greater efficiency than others in terms of hydrolytic activity and thermal stability. However, this did not occur for oligolysine synthesis. Trypsin-Amberzyme proved to be more successful in oligopeptide synthesis, and exhibited excellent reusability, since it retained 90% of its initial hydrolytic and synthetic activity after 7 reuses. Trypsin hydrophobic interactions with Amberzyme support are responsible for protecting against strong enzyme conformational changes in the medium. In addition, the high concentration of oxirane groups on the surface promoted multi-covalent linking and, consequently, prevented the immobilized enzyme from leaching. The aforementioned results suggest that immobilized Trypsin on the supports evaluated can be efficiently used for oligopeptides synthesis in aqueous media
Resumo:
The development of products whose purpose is to promote blockages in high permeability zones as well as to control the hydrate or scale formation also needs some tests in porous media before using the product in the field, where attempts and unavoidable operational errors costs would able to derail any projects. The aim of this study was to analyze and compare the Botucatu and Berea sandstones properties, involving problems related to loss permeability. It was observed that even cores of Berea, without expansible clays in their composition had their permeability reduced, as soon as the salinity of brine reached a lower limit. As expected, the same happened with the Botucatu sandstone samples, however, in this case, the sensitivity to low salinity was more pronounced. In a second phase, the research was focused on the Botucatu Sandstone behavior front of dilute polymer solutions injection, checking the main relationships between the Rock / Fluid interactions, considering the Mobility Reduction, Resistance and Residual Resistance Factors, as well as adsorption/desorption processes of these polymers, and the polymer molecules average size and porous sandstone average size ratio. The results for both phases showed a real feasibility of using the Botucatu sandstone in laboratory tests whose objective is the displacement of fluids through porous media
Resumo:
Control and automation of residential environments domotics is emerging area of computing application. The development of computational systems for domotics is complex, due to the diversity of potential users, and because it is immerse in a context of emotional relationships and familiar construction. Currently, the focus of the development of this kind of system is directed, mainly, to physical and technological aspects. Due to the fact, gestural interaction in the present research is investigated under the view of Human-Computer Interaction (HCI). First, we approach the subject through the construction of a conceptual framework for discussion of challenges from the area, integrated to the dimensions: people, interaction mode and domotics. A further analysis of the domain is accomplished using the theoretical-methodological referential of Organizational Semiotics. After, we define recommendations to the diversity that base/inspire the inclusive design, guided by physical, perceptual and cognitive abilities, which aim to better represent the concerned diversity. Although developers have the support of gestural recognition technologies that help a faster development, these professionals face another difficulty by not restricting the gestural commands of the application to the standard gestures provided by development frameworks. Therefore, an abstraction of the gestural interaction was idealized through a formalization, described syntactically by construction blocks that originates a grammar of the gestural interaction and, semantically, approached under the view of the residential system. So, we define a set of metrics grounded in the recommendations that are described with information from the preestablished grammar, and still, we conceive and implement in Java, under the foundation of this grammar, a residential system based on gestural interaction for usage with Microsoft Kinect. Lastly, we accomplish an experiment with potential end users of the system, aiming to better analyze the research results
Resumo:
Web services are loosely coupled applications that use XML documents as a way of integrating distinct systems on the internet. Such documents are used by in standards such as SOAP, WSDL and UDDI which establish, respectively, integrated patterns for the representation of messages, description, and publication of services, thus facilitating the interoperability between heterogeneous systems. Often one single service does not meet the users needs, therefore new systems can be designed from the composition of two or more services. This which is the design goal behind the of the Service Oriented Architecture. Parallel to this scenario, we have the PEWS (Predicate Path-Expressions for Web Services) language, which speci es behavioural speci cations of composite web service interfaces.. The development of the PEWS language is divided into two parts: front-end and back-end. From a PEWS program, the front-end performs the lexical analysis, syntactic and semantic compositions and nally generate XML code. The function of the back-end is to execute the composition PEWS. This master's dissertation work aims to: (i) reformulate the proposed architecture for the runtime system of the language, (ii) Implement the back-end for PEWS by using .NET Framework tools to execute PEWS programs using the Windows Work ow Foundation
Resumo:
Objective to establish a methodology for the oil spill monitoring on the sea surface, located at the Submerged Exploration Area of the Polo Region of Guamaré, in the State of Rio Grande do Norte, using orbital images of Synthetic Aperture Radar (SAR integrated with meteoceanographycs products. This methodology was applied in the following stages: (1) the creation of a base map of the Exploration Area; (2) the processing of NOAA/AVHRR and ERS-2 images for generation of meteoceanographycs products; (3) the processing of RADARSAT-1 images for monitoring of oil spills; (4) the integration of RADARSAT-1 images with NOAA/AVHRR and ERS-2 image products; and (5) the structuring of a data base. The Integration of RADARSAT-1 image of the Potiguar Basin of day 21.05.99 with the base map of the Exploration Area of the Polo Region of Guamaré for the identification of the probable sources of the oil spots, was used successfully in the detention of the probable spot of oil detected next to the exit to the submarine emissary in the Exploration Area of the Polo Region of Guamaré. To support the integration of RADARSAT-1 images with NOAA/AVHRR and ERS-2 image products, a methodology was developed for the classification of oil spills identified by RADARSAT-1 images. For this, the following algorithms of classification not supervised were tested: K-means, Fuzzy k-means and Isodata. These algorithms are part of the PCI Geomatics software, which was used for the filtering of RADARSAT-1 images. For validation of the results, the oil spills submitted to the unsupervised classification were compared to the results of the Semivariogram Textural Classifier (STC). The mentioned classifier was developed especially for oil spill classification purposes and requires PCI software for the whole processing of RADARSAT-1 images. After all, the results of the classifications were analyzed through Visual Analysis; Calculation of Proportionality of Largeness and Analysis Statistics. Amongst the three algorithms of classifications tested, it was noted that there were no significant alterations in relation to the spills classified with the STC, in all of the analyses taken into consideration. Therefore, considering all the procedures, it has been shown that the described methodology can be successfully applied using the unsupervised classifiers tested, resulting in a decrease of time in the identification and classification processing of oil spills, if compared with the utilization of the STC classifier