66 resultados para EDIFÍCIOS
Resumo:
The main objective of this thesis was the study of bracing panels of structural masonry, by applying the Finite Element Method and Strut and Tie Method. It was analyzed the following aspects: the effect of orthotropy on the behavior of the panels; distribution of horizontal forces between panels for buildings; comparison between Equivalent Frame and Finite Elements models; panels design with the Strut and Tie Method. The results showed that one should not disregard the orthotropy, otherwise this can lead to models stiffer than the real. Regarding the distribution of horizontal forces, showed that the disregard of lintels and shear deformation leads to significant differences in the simplified model. The results showed also that the models in Finite Element and Equivalent Frame exhibit similar behavior in respect to stiffness of panels and stress distribution over the sessions requested. It was discussing criteria for designing Strut and Tie Method models in one floor panels. Then, the theoretical strength these panels was compared with the rupture strength of panels tested in the literature. The theoretical maximum strength were always less than the rupture strength of the panels obtained in tests, due to the fact that the proposed model cannot represent the behavior of the masonry after the start of the panel cracking due to plasticization of the reinforcement
Resumo:
Through this research is detailed the Brazilian seismic code focused on concrete projects design related to seismic engineering. At the beginning of the research is debated the fundaments of the seismic effects, the influence factors to the development of seismic effects and also relates the main data registration happened in Brazil. The second step is study the Brazilian seismic code explaining all the concepts related to it and does a compilation to the most important international seismic code. At this research is developed the designing of a building submitted to horizontal equivalent seismic forces and the modal process based on the answer spectrum based on the brazilin seismic code. It was also developed the design of a commercial building submitted to seismic loads based on the Brazilian code answer spectrum and compared to the same building submitted to wind loads.The research also focus on projects conception and detailing of seismic engineering Project design. At the study of seismic engineering it was concluded that seismic effects require special focus on concrete structures design, proving that is the essential consider the seismic effects
Resumo:
This paper presents the validation of the Performance Indicator System for Projects under Construction - SIDECC. The goal was to develop a system of performance indicators from the macroergonômica approach, considering criteria of usefulness, practicality and applicability and the concept of continuous improvement in the construction industry. The validation process SIDECC consisted of three distinct models. Modeling I corresponded to the theoretical development and validation of a system of indicators. Modeling II concerns the development and validation of multi- indicator system. For this modeling, we used the Mother of Use and Importance and Multivariate Analysis. Modeling III corresponded to the validation situated, which consisted of a case study of a work of construction of buildings, which were applied and analyzed the results of modeling II. This work resulted in the development of an applied and tested for the construction of an integrated system of performance indicators methodology, involving aspects of production, quality, environmental, health and safety. It is inferred that the SIDECC can be applied, in full or in part, the construction companies as a whole, as well as in other economic sectors
Resumo:
The study that resulted in this dissertation was developed at OU RNCE PETROBRAS, in Natal, which implemented a project of rational use and reuse of water, including use of wastewater from a Sewage Treatment Plant (STP) already in place, diluted with water from own wells for irrigation of green area of the building complex corporate enterprise. Establish a methodology that can serve as guidelines for future projects controlled reuse of water like this was the objective of this research. Been proposed, implemented and evaluated three instruments of sanitary and environmental control: 1) adaptation of sewage treatment plant and quality control of the treated effluent 2) analysis of soil-nutrient interaction in the irrigated area, 3) knowledge of the local hydrogeology, especially with regard to the direction of flow of the aquifer and location of collection wells of Companhia de Águas e Esgotos do Rio Grande do Norte (CAERN) situated in the surroundings. These instruments have proven sufficient and appropriate to ensure the levels of sanitary and environmental control proposed and studied, which were: a) control of water quality off the STP and the output of the irrigation reservoir, b) control of water quality sub surface soil and assessment of progress on soil composition, c) assessment of water quality in the aquifer. For this, we must: 1) establishing the monitoring plan of the STP and its effluent quality sampling points and defining the parameters of analysis, improve the functioning of that identifying the adequacy of flow and screening as the main factors of operational control, and increase the efficiency of the station to a relatively low cost, using additional filters, 2) propose, implement and adapt simple collectors to assess the quality of water percolating into the soil of the irrigated area, 3) determine the direction of groundwater flow in the area study and select the wells for monitoring of the aquifer.
Resumo:
This research has the goal to analyze the urban setting of the Planalto neighborhood, in Natal /RN, seeking to unravel the processes, agents and contradictions associated with the production of the space. The choice of neighborhood is justified by the observation that changes in its urban setting have been growing in speedy way. We highlight the performance of the housing market, in partnership with the state, and the construction of condominiums and buildings closed by the housing program Minha Casa, Minha Vida. This has favored the reproduction of a new " urban reality in the neighborhood, setting an urban standard that differs from the original morphology, seen as peripheral within the urban dynamics of the city. The research is a qualitative study, through documents, interviews with stakeholders, and photographic documentation. In this perspective , we seek to understand the current phase (2000s) the production of space in the neighborhood process through the development of the housing market , as an extension of the urban development in central zone of Natal/RN, analyzing the performance of agents and their producers the "new " uses redefining the "old ". Thus, it can be seen that there is in the neighborhood, urban reality in a pluralistic constitution, from the existence of different social classes inhabiting the same space. On this way, the city is produced from the appropriation of space by different social classes, although due to the economic condition of each of them
Resumo:
This paper has the imaginary names as a theme, from which we aim to analyze the imaginaries and invested interests that characterized the implementation and the legitimation of the First Republic in Rio Grande do Norte (1889 1930), making the process of registering names history in that place. For the construction of our object, we studied laws and provincial, state and municipal decrees; annual messages of governors; articles of the following newspapers O Povo, A República, Diário do Natal, O Seridoense, A Notícia and Jornal das Moças; the local cartography and historiography that talk about the study of names. The use of these resources, allied to the empiric method, was driven by a theoretic methodological contribution based on the history of the political imaginary, as discussed by Cornelius Castoriadis, René Rémond, Michel de Certeau and Maria Dick. For the understanding of the imaginaries that (de)limited the spaces of Rio Grande do Norte concerning its names during the First Republic, we bring moment back to the two last imperial decades moment of cleavage between Empire and Republic essential for the fomentation of the imaginary that embodied the organization of our study. From this period, we observe, through the names of some cities, how the northern space would be aligned to the imaginary dynamic of the new political system of the nation, and it had followed to a redirection process of the giving names action, according to the interests of the family organization Albuquerque Maranhão, revealed while determining the names of cities, towns, streets, schools, buildings, etc., in thankfulness to the memory of its members. In the sequence we verified how a new dynamic of giving names helped to understand the process of political transition from the Coast to the Sertão, and at the same time affirmed the power of the political and economical seridoense elite towards the government of the state in the two last decades of the First Republic
Resumo:
This work broaches the participation of the Jewish community in the urban expansion of Recife, Brazil, during the Dutch period (1630-1654). With the arrival of the Dutch, the village of Olinda, former capital of Pernambuco, was destroyed and Recife received the juridical statute of city (stad), becoming the capital of Dutch Brazil or New Holland. It became the main West Indians Company s entrepot in South Atlantic, serving as naval base, port of call for ships, and point of export of the sugar production of Pernambuco, and import of European goods and African slaves. In order to such administrative, military and economic functions be carried out, the sand isthmus where Recife used to stay, and the fluvial island of Antônio Vaz, received improvements of many sort. The Dutch hydraulic technology was put in practice, with a posture of opposition between civilization and nature. Among military works and production of urban equipments, the rivers shores were land-filled, canals were built, bridges were lifted, and hundreds of buildings were erected. The civil Dutch population of Recife engaged in the process of production of physical space, which brought a sense of collective action towards the formation of the urban, or burgher, community. From the physical to the social space, there was an effort towards Dutch cultural standards in the urban environment. The Zur Israel Jewish community, formed by private civilians, it is, nonemployees of the WIC, engaged in those processes. It produced physical space through the land-filling and improvement of non healthy areas, and was also responsible for the construction of a significant section of the town s buildings and some of urban equipments, such as stores, markets and slave-warehouses, making more dynamic their economical activities. But their social traffic was due to the adaptation of their behavior to the standards of Dutch sociability. Thus, the community body made itself part of the social body. Disposing of internal selfregulation, it produced spaces with their cultural references cemetery, synagogue, texts enjoying benefits of the government. Zur Israel inscribed itself in the universal history of the Jews as the first community of Americas, and had a fundamental part on the emancipation of Jews within Western society
Resumo:
This paper prese nts the validation of the Performance Indicator System for Projects under Construction - SIDECC. The goal was to develop a system of performance indicators from the macroergonômica approach, con sidering criteria of usefulness , practicality and applicabilit y and the concept of continuous improveme nt in the construction industry . The validation process SIDECC consisted of three disti nct models . Modeling I corresponded to the theoretical development and valid ation of a system of indicators . Modeling II concern s the development and valida tion of multi - indicator system . For this modeling, we used the Mother of Use and Importance and Multivariate Analysis . Modeling III correspo nded to the validation situated , which consisted of a case study of a wo rk of construct ion of buildings , which were applied and anal yzed the results of modeling II . This work resulted in the development of an applied and tested for the construction of an integrated system of per formance indicators methodology , involving aspects of production , quality , e nvironmental, health and safety . It is inferred that the SIDECC can be applied, in full or in part , the construction companies as a whole, as we ll as in other economic sectors .
Resumo:
For many y ears, the federal government policy is to use project for in order to speed up the work for decreasing the elementary education deficit vacancy . In Natal municipality the schoolhouses for children, from 0 to 6 years of age are denom inated Muinicipality Centre for Elementary Education. The federal government provides capital for the news edifications by the program of government named PROINFÂNCIA. This program embraces three types of projects. Type “A” must be furnished by the interes ted municipality and approved by Education and Cultura Ministry. The type “B” is standard plan with capability to 120 schoolchildren in full - time or 240 in two turns and ground plot measuring 40 x 70m and the “type C” also a standart projects to 60 schoolc hildren in full - time or 120 in two turns and ground plot measuring 35 x 45m. Sometimes , due to scarcity of bigger ground plot s is the “type C” instead of “type B”, referring to offering vacancies. In this meaning, this study intend s to present the draft - project to elementary schoolhouse, modulated and flexible, emphasizing the children needs . Therefore, it was studied concept, school architecture, construction technology, reference study and visiting to MCEE Fernanda Jales (PROINFÂNC IA “tipo B”). However, the proposal synthesizes the draft - project by module, implanting in its totality or in parts, according to its necessity and lot cha racteristic.
Resumo:
In the design of a building process must consider climatic variations in the region, the external conditions and the use of available resources in nature, like the sun, vegetation, rain and winds, to provide a built environment with comfort and environment reduced energy expenditure. However, increasing urbanization, often with an occupancy of disordered ground comes disregarding this knowledge and disregarding local characteristics, drastically reducing the green areas. This disordered occupation associated with the reduction of green spaces, is modifying aspects of climate and thus, damaging the thermal comfort of users. Given this situation was born the question: What projetuais strategies can bring better thermal conditions to an educational building located in a region of hot and humid weather? Thus, faced with two important issues , education and environmental comfort , the research is justified by the fact that there is a large national demand for expansions and renovations in its public schools , but not in most areas provides students with quality for good learning development. This paper aims to draw up a project for establishment of Primary Education with the application of the concepts of bioclimatic, highlighting the use of vegetation as a regulatory element of the climate. Initially we carried out a literature search; we analyzed architectural solutions and set up the site. The next phases, called understanding, were raised with the laws, rules and environmental restrictions. Subsequently, the program needs and the development of architectural design was defined. The conclusion of this paper presents the definition of criteria and solutions for the use of vegetation to design of bioclimatic architecture in hot and humid climates and contributes a catalog of plant species for schools in the metropolitan region of Natal, RN.
Resumo:
This work consists of the integrated design process analyses with thermal energetic simulation during the early design stages, based on six practical cases. It aims to schematize the integration process, identifying the thermal energetic analyses contributions at each design phase and identifying the highest impact parameters on building performance. The simulations were run in the DesignBuilder energy tool, which has the same EnergyPlus engine, validated. This tool was chosen due to the flexible and user friendly graphic interface for modeling and output assessment, including the parametric simulation to compare design alternatives. The six case studies energy tools are three architectural and three retrofit projects, and the author the simulations as a consultant or as a designer. The case studies were selected based on the commitment of the designers in order to achieve performance goals, and their availability to share the process since the early pre-design analyses, allowing schematizing the whole process, and supporting the design decisions with quantifications, including energy targets. The thermoenergetic performance analyses integration is feasible since the early stages, except when only a short time is available to run the simulations. The simulation contributions are more important during the sketch and detail phases. The predesign phase can be assisted by means of reliable bioclimatic guidelines. It was verified that every case study had two dominant design variables on the general performance. These variables differ according the building characteristics and always coincide with the local bioclimatic strategies. The adaptation of alternatives to the design increases as earlier it occurs. The use of simulation is very useful: to prove and convince the architects; to quantify the cost benefits and payback period to the retrofit designer; and to the simulator confirm the desirable result and report the performance to the client
Resumo:
The great demand for Federal Institutions of High Education (IFES) design, triggered by the favourable political moment, boosts the public works market and brings with it the stigma of seeking the lowest cost and meet the federal Law 8.666/93 (Bids). In this context, this research makes an analysis of compliance with Fire Safety’s normative requirements in IFES’s architectural designs, taking this point as an evaluation of quality of designs. For the study, were used, IFES’s designs, specifically from UFERSA – Universidade Federal Rural do Semiárido and UFRN – Universidade Federal do Rio Grande do Norte, selected by the relationship use x public served and yet, in the replication of these buildings’ construction. The research was developed through the identification of the Fire Safety applicable legislation to the designs in question, with the determination of the demanded conditions that are architect’s autonomy or that affect the architectural design. Tabulated the requirements, through data collection and measures gathered in the blueprints, was made a comparison and verification of the compliance with these. The results of this evaluation reveal that the minimum requirements was not fulfilled and that IFES’s architectural designs, taken as object in this study, certainly will suffer restrictions in their regularization process with the Fire Department. It is concluded that is necessary an improvement in the IFES’s designs to meet the minimum fire safety regulations and improvement in quality. Moreover, the results direct to the understanding that level of knowledge about Fire Safety received in undergraduate by architects is insufficient for appropriate elaboration of architectural designs in this area.
Resumo:
The integration between architectural design and structur al systems consi sts, in academic education, one of the main challenges to the architectural design education . Recent studies point to the relevance of the use of computational tools in academic settings as an important strategy for such integration. Although in recent yea rs teaching experience using BIM (BuildingInformationModeling) may be incorporated by the a rchitecture schools , notes the need for further didactic and pedagogical practices that promote the architectural design and structur al integration teaching. This pa per analyzes experiences developed within the UFRN and UFPB, seeking to identify tools, processes and products used, pointing limitations and potentials in subjects taught in these institutions. The research begins with a literature review on teaching BIM and related aspects to the integration of architectural design and stru c tur e . It has been used as data collection techniques in studio the direct observation, the use of questionnaires and interviews with students and teachers, and mixed method, qualitativ e and quantitative analysis . In UFRN, the scope of the Integrated Workshop as a compulsory subject in the curriculum, favors the integration of disciplines studied here as it allows teachers from different disciplines at the same project studio . Regarding the use of BIM form initial users, BIM modelers, able to extract quantitative and automatically speed up production, gaining in quality in the products, however learn the tool and design in parallel cause some difficulties. UFPB, lack of required courses o n BIM, generates lack of knowledge and confidence in using the tool and processes, by most students. Thus we see the need for greater efforts by school to adopt BIM skills and training. There is a greater need for both BIM concept, in order to promote BIM process and consequent better use of tools, and obsolete avoiding impairment of technology, merely a tool. It is considered the inclusion of specific subjects with more advanced BIM skills, through partnerships with engineering degrees and the promotion of trans disciplinary integration favoring the exchange of different cultures from the academic environment.
Resumo:
This thesis will discuss the topic architectural atmospheres, based on Peter Zumthor's works and narrative. The subject "architectural atmospheres" is defined in the study as the "complex and general condition, realized by the user during the experience of a place". Atmospheres are composed of the overlap of all physical qualities that compound a space and its perception, conditioned by individual issues of the user. The atmosphere is realized through all human body receivers, in a multi-sensorial process, and affects qualitatively the spacial experience of the places created by architecture. The study has three chapters. The first chapter is a reflection on the issues that architectural atmospheres present. It passes through the concept and definition of the subject and includes a compilation of design principles that act on the architectural atmosphere composition in a variety of projects by a range of professionals. In the second chapter, the procedures adopted by Peter Zumthor in his design process that focus on atmosphere composition are studied. In the third and last chapter, Brother Claus Chapel (Wachendorf, German) and Kolumba Museum (Colon, German) projects, both by Peter Zumthor, are analyzed, in order to comprehend the complex role of elements that constitute the architectural atmosphere of each of these places. The methodology used throughout the thesis consists of bibliography and documental analysis, based on books, plans and material searched on Internet. Furthermore, the project analysis counted with the personal experience of the author of this thesis upon visiting the studied buildings. Finally, in conclusion, it is realized that when architecture is made in order to touch the user, expressed by its built objects, it can be provide a vast conceptual and theoretical basis that valorizes and enriches the experience of its use. It (the architectural atmosphere) is related to an approach that uses the same elements of any other construction, but distinguishes itself by the connections that it implies with humans and its environment. In the face of new patterns unveiled for contemporary architecture, this study contribution is based around the opportunity to understand this particular relationship between user and architectural object, identified as a phenomenological approach of architecture, as well as to update the subject bibliography, still scarce among Brazilian universities.
Resumo:
The present study has the objective of analyzing how the ways of dwelling influences the uses and the functional and symbolic appropriations of the urban space in Fortaleza city center, through the perspective of the residents and their relation with the living place. Scenarios of development and degradation of its urban space have marked the city center of Fortaleza. The intensification of the commercial and services occupation promoted through the years, paradoxically, the valorization of the land price and the devalorization of the residential use. Thus, the residential occupation was consolidated in a discontinuous way, being concentrated mainly in the external limits of the historical core of the neighborhood. The research is structured over the delimitation of an area and the selection of multifamily residential buildings, built since the 1960s, close to the central core of the neighborhood. The spatial configuration analysis of the selected residential buildings, and their relations with the urban surroundings and the land uses, reveals different aspects related to the urban vitality, producing impacts over the ways of dwelling constituted by the daily life of the residents. The study of the ways of dwelling involves the comprehension that the dwelling is beyond the private residential boundaries and the functional occupation. The conceptual base of this research is developed over the perspective that the dwelling represents a fundamental aspect of the human condition, allowing the person to relate with the space in an essential way (HEIDEGGER, 2012). In this perspective of the dwelling, the space reunites the mental and the cultural, the social and the historical, being marked by simultaneous logics of the conceived, the perceived and the lived space (LEFEVBRE, 2006). The development of this study, over the point of view of the neighborhood residents, is inserted in the perspective of the lived space, related to the concept of place, understood as a qualitative phenomenon, giving essence and identity to the space. The place of dwelling, marked by coexistences, is one of the structural elements of the urban land use, and potential for the rehabilitation of the central areas in big cities. Therefore, the study starts from the hypothesis that the location, the nearby land uses and the spatial configuration of the residential buildings affect the ways of dwelling, in other words the residents dissolve the boundaries of the shelter and experience the urban space, from the dwelling place. The requalification of the dwelling is opposed to the residential space based in functionality, in hierarchy, in self sufficiency, in standardization and in the reproduction of the urban space, materialized in the dense contemporary residential buildings, that are unrelated to the city. The stages of the research involved the spatial configuration analysis of the selected residential buildings and their surrounding, the land use mapping and interviews with the residents. The collected data allowed verifying that the buildings are located in areas presenting heterogeneous land uses, with a great number of residents and users. However, these aspects are not sufficient to promote the vitality of the public spaces in the neighborhood, since the people movement in the streets is controlled by the opening hours of the predominant commercial use in the area. The word of the residents, collected in interviews, indicate that the conservation conditions of the public spaces and the insecurity influences their everyday relations with the place of dwelling, affecting fundamental aspects for the dwelling requalification in the central area of Fortaleza.