Degradacao termica e catalitica da borra oleosa de Petroleo com materiais nanoestruturados al-mcm-41 e AL-SBA-15

Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ° C in the ratios of heating of 5, 10 and 20 ° C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline

A ciência-ação: fundamentos filosóficos e relevância para a enfermagem

ENDERS,Bertha Cruz, FERREIRA,Priscila Brigolini Porfírio, MONTEIRO, Akemi Iwata.A ciencia-açao: fundamentos filosoficos e relevancia para a enfermagem. Revista Texto Contexto em Enfermagem, Florianópolis, v.19, n.1,p.161-7.Jan/Mar.2010.

Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilos

Dutra, R. P. S.; Varela,M. L.; Nascimento, R. M. ; Gomes, U. U. ; Martinelli1, A. E. ; Paskocimas, C. A. Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilosa. Cerâmica [online]. 2009, vol.55, n.333, pp. 100-105. ISSN 0366-6913. doi:Disponivem em: . Acesso em: 04 out. 2010.

Vannevar Bush e as matrizes discursivas de As we may think: por uma possível história da Ciência da Informação

MEDEIROS, A. L.; VANTI, Nadia. Vannevar Bush e as matrizes discursivas de As we may think: por uma possível história da Ciência da Informação. Informação & sociedade:Estudos. João Pessoa, v. 21, p. 31-39, 2011

A cientometria revisitada à luz da expansão da ciência, da tecnologia e da inovação

VANTI, Nadia. A cientometria revisitada à luz da expansão da ciência, da tecnologia e da inovação. PontodeAcesso, Salvador, v. 5, p. 5-31, 2011

A ciência-ação: fundamentos filosóficos e relevância para a enfermagem

A prática de enfermagem envolve o enfermeiro da clínica como agente de deliberação e ação, confrontando situações do cotidiano e assumindo, através de conhecimento científico, experiências anteriores ou por conceitos próprios e intuitivos, formas específicas de ver e agir na prática. O agir constitui fonte de conhecimento passível de acesso por métodos de investigação interpretativos. O objetivo deste trabalho é apresentar, analiticamente, a filosofia da Ciência-Ação em sua relação com a construção do conhecimento na enfermagem. Explica-se a Ciência-Ação como método inovador de inquérito e a sua tradição filosófica na abordagem nas ciências sociais, e se discute a sua articulação com a proposta epistemológica da enfermagem. Sugere-se a adoção dessa vertente em estudos de enfermagem, pelo seu enfoque na reflexão sobre as ações do enfermeiro e na prática como fonte de conhecimento. Conclui-se que a Ciência-Ação possui potencial para o avanço da teoria específica da prática da enfermagem, do conhecimento próprio da enfermagem

O ambientalismo econômico no discurso da reciclagem dos materiais

O modelo civilizatório da sociedade global fundamenta-se na produção à larga escala e no aumento exponencial e diversificado do consumo. Este modelo impacta o meio ambiente já que demanda grandes quantidades de recursos naturais e provoca contaminação ambiental. No leque desta contaminação, a geração de resíduos sólidos surge como uma das principais devido a seus efeitos nocivos serem sentidos de forma imediata pelas pessoas. Em países como o Brasil, uma das soluções requeridas para se minimizar e/ou equacionar a problemática engendrada pelos resíduos sólidos é a reciclagem dos materiais. A justificativa oficial pelo esforço à reciclagem está nas características da atividade já que o uso de materiais reciclados reduz a demanda por recursos naturais em processos produtivos industriais, aumenta o tempo de vida útil dos aterros sanitários (local de destino final dos resíduos), além de gerar emprego e renda para os catadores, sujeitos que sobrevivem da coleta e separação dos materiais recicláveis. A partir de uma ética ambiental, a pergunta que deve ser feita quando nos propomos a analisar as implicações da geração dos resíduos é: por que a sociedade global gera resíduos sólidos de maneira acentuada? Contudo, à luz dos pressupostos mercadológicos do capitalismo, a pergunta que move as discussões acerca da problemática dos resíduos sólidos é: o que fazer com a crescente geração de resíduos sólidos? O presente artigo se propõe a uma reflexão dos elementos justificativos dessa ode à reciclagem. Em nossa perspectiva, a reciclagem fomenta ao que denominamos de ambientalismo econômico, no qual o discurso pró-reciclagem se apropria dos elementos e potencialidades ambientais da atividade da reciclagem para justificar as ações de caráter econômico no que se refere ao que fazer com os resíduos gerados diariamente.

Biblioteca Digital de Teses e Dissertações: grau de utilização pelos mestrandos do curso de Ciência da Informação das Universidades Públicas Brasileiras

A pesquisa aborda o uso das Tecnologias de Informação e Comunicação, que vem revolucionando as atividades e ocasionando muitas mudanças relacionadas ao acesso e uso de informações. O objetivo foi analisar o grau de utilização do conhecimento científico produzido pelos Programas de Pós-Graduação das Universidades Públicas Brasileiras, através da BDTD, pelos mestrandos dos referidos programas. Nos procedimentos metodológicos realizados, procurou-se inicialmente analisar o amplo espectro da população do corpus da pesquisa. Em razão da impossibilidade de trabalhar com os Programas de Pós-Graduação como um todo, optou-se por fazer um recorte, elegendo os cursos de Pós-Graduação em Ciência da Informação, vez que estes representam o principal segmento social de interesse da pesquisa. Foi utilizado o método de estudo de usuários, onde se optou por adotar o grupo, “estudos orientados aos usuários”, que identifica as necessidades e comportamento de acesso e uso da informação. Para coletar os dados, elaborou-se um questionário semi-estruturado com 25 questões, que versavam sobre o uso, dificuldades de acesso e recuperação da informação, bem como a satisfação na utilização dessa fonte informacional. Dentre os vários resultados obtidos, podemos destacar o fato de que a maioria dos mestrandos (71,8%) só teve contato com a BDTD somente no momento em que se encontrava cursando o mestrado e, somente 24,3%, tiveram contato durante a graduação. Estes resultados representam um problema, que pode afetar o bom desempenho do projeto BDTD, o qual consiste em disseminar e divulgar a produção científica dos Programas de Pós-Graduação das Universidades Públicas Brasileiras para a sua comunidade. Foi observado também, que os mestrandos oriundos do curso de Biblioteconomia tende a ter contato com a BDTD bem mais cedo do que mestrandos de outros cursos de graduação. A fim de minimizar o problema detectado, propõe-se uma divulgação mais eficaz na graduação através de dois procedimentos: Primeiro, o docente deve fazer uma divulgação mais eficaz da BDTD junto aos discentes de todos os cursos de graduação; segundo: deverá ser feita a divulgação na mídia eletrônica, através da inserção de ícones da BDTD, nos portais dos Departamentos dos Cursos de Graduação das Universidades Públicas Brasileiras. Acredita-se que com estes procedimentos seja possível aperfeiçoar o uso dessa fonte de informação científica.

Coevolução e as práticas isomórficas de gestão: um estudo sobre os processos de mudanças institucionais no Instituto Federal de Educação, Ciência e Tecnologia do RN

The Federal Institution for Education, Science and Technology, in its historical path, has been living different changes. The transformations occurred along the way have been determined by coercive forces from the institutional environment, which has became more and more broad and complex throughout the time, obtaining diverse characteristics and new elements such as non institutional factors1 which started to contribute with the other changes. In this context, this work aims to study the isomorphic practices of the managers in the institutional changes process of the IFRN in 1998 and 2008, as of a theoretical coevolutionary perspective (CHILD; RODRIGUES; LEWIN; CARROL; VOLBERDA, 2003). This theory brings a new point of view for the organization analysis to the organizational studies, since it offers a non deterministic and non linear lection of the evolution process, which means, a coevolution. Thus, the organizations and their institutional and non institutional environment auto evolve, auto organize and auto reproduce. Therefore, the institutional and non institutional factors of the macro environment keep a continuous interdependence relationship with the organizations. For the means of this study, it is important to understand that is impossible to comprehend the object, the isomorphic practices, without considering that the previous institutional changes and its evolutions, its continuations and discontinuations, important in the coevolution process. As such, to call upon the institutional historical track is a fundamental aspect to materialize this study, for the recursive movement is indeed present in the coevolution. Another important point to make this research effective is that it is not possible to abdicate from the hologramatic view2 of this study, which considers the object, the isomorphic practices, part of the whole and this whole is also in the parts, therefore it is impossible to comprehend the object of study outside the context where it belongs. With this, as of the objective previously proposed, it is necessary to describe the characteristics of coevolution of the institutional changes related in 1998 and 2008; analyze the dynamic of the isomorphic mechanisms in its respective institutional change process; and describe the lessons learned which the isomorphic practices left to the IFRN, regarding its benefits and difficulties. All these transformations happened through coercive forces3 of the institutional environment. As of the Nineties, these forces became stronger, the environment became broader and more complex, with the emergency of new environmental factors. This study proposed to study the managing process and its practices, related to the micro environment, although it is required to articulate these actions, the demands and requirements from the macro environment. To make this research effective, semi structured interviews have been conducted with the managers who participated in both institutional change processes. In the results analysis, it has been possible to verify the particularity of each change, the one from 1998 with a strong normative action of the managers against coercive forces from the government for the search of recognition and the institutional legitimation and the one in 2008, which has been characterized by the normative action by managers in agreement with the coercive forces from the government, in favor of the government policy for the technological professional education. However, the results analysis it is possible to notice the evidence of a belonging feeling from the interviewed managers

Combater as secas e defender as florestas a natureza nos desafios da ciência e da técnica para modernizar o Brasil (1889 a 1934)

In the first decades of 20th century the just instituted Brazilian Republic faced the challenge to modernize the country. Considering that the progress was associated with the exhaustion of the forest reserves and with climatic changes, two big issues were seen as fundamental: To Fight the Droughts and To Defend the Forests; headed by professionals who were dedicated to these ideals. This research starts from the premise that these were the main challenges enforced by nature to the Brazilian development; the general objective was delimited in the search to understand the meaning and the conception of the natural world by this group of professionals who faced the shock between modernizing the country and conserving its natural resources. Aiming to contribute with the construction of the Brazilian environmental history and to bring historical elements to the debate about the environment in the country, the author concentrates his attention to the analyses, the discussions and the actions that preceded the regulation on the use of natural resources and the implementation of the environmental legislation in Brazil, occurred in 1934. The investigation uses as methodological basis the theoretical directions of environmental history, using sources of data still little explored and valued. In such way, it is taken as starting point some published papers about this subject during the period between 1889 and 1934 in two technical magazines the Revista Brazil Ferro-Carril and the Revista do Club de Engenharia. National engineering played a basic role in this process while arguing, projecting and constructing the development. The formulated proposals, after being divulged, had fomented the interchange with other professionals and had favored the advance of ambient questions in Brazil, in the sense to preserve natural resources, to construct more harmonic relations between the society and the nature and to equate the development with the environment preservation

Adição de superplastificante e anti-segregante à base de CMC em pastas de cimento para Poços de Petróleo

Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields

Avaliação da dolomita funcionalizada para remoção de H2S em gás natural

The natural gas is an alternative source of energy which is found underground in porous and permeable rocks and being associated or not to the oil. Its basic composition includes methane, other hydrocarbon and compounds such as carbon dioxide, nitrogen, sulphidric gas, mercaptans, water and solid particles. In this work, the dolomite mineral, a double carbonate of calcium and magnesium whose the chemical formula is CaMg(CO3)2, was evaluated as adsorbent material. The material was characterized by granulometric analysis, X-ray fluorescence, X-ray diffraction, thermogravimetric analysis, differential thermal analysis, specific surface area, porosity, scanning electronic microscopy and infrared spectroscopy. Then the material was functionalized with diethanolamine (dolomite+diethanolamine) and diisopropylamine (dolomite+diisopropylamine). The results indicated that the adsorbents presented appropriate physiochemical characteristics for H2S adsorption. The adsorption tests were accomplished in a system coupled to a gas chromatograph and the H2S monitoring in the output of the system was accomplished by a pulsed flame photometric detector (PFPD). The adsorbents presented a significant adsorption capacity. Among the analyzed adsorbents, the dolomite+diethanolamine presented the best capacity of adsorption. The breakthrough curves obtained proved the efficiency of this process

Desenvolvimento de formulações para produção de grés porcelanato a partir de matérias-primas da região da bacia do Parnaíba

Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato

Formulação e caracterização de matérias-primas para revestimento cerâmico Semi-Poroso com adição de chamote de telhas

The ceramics industry in Piauí is nowadays with 55 industries where 11 are in Teresina which is the mainstream of the state, producing 55 million shingles; in which 10 % is of this production is wasted being sometimes thrown on the margins of rivers, roads and highways provoking an environmental degradation. The main goal of this work is to verify the potential of producing semi porous ceramic using grog of shingles, on the first part of this work bodies-of-proof were produced from a basic formula of an industry, doping it with 5 %, 10 %, 15 % and 20 % in mass and in the second part of this work some bodies-of-proof were produced from a formula where one raw material was substituted by 50 % of grog and another substituting it all by grog, bodies-of-proof made of a basic formula previously announced was used for experiment control.The grog and the raw materials were characterized by: particle size analysis , thermal differential analysis, X ray diffraction , X ray fluorescence, an thermal gravimetric analysis and rational analyses. The bodies-of-proof were sintetisized in an industrial oven obeying the normal cycle adopted by an industry, with peak temperatures of 1135 oC and a fast burning cycle of 25 minutes having as energetic fuel liquefied petroleum gas . The pieces that were obtained by this were submersed in rehearsed physics of: water absorption of, apparent specific mass, apparent porosity, lineal retraction, rupture tension to the flexural and dilatometry; mineralogical analysis for X ray diffraction; and microstructural for electronic microscope of sweeping. For all the formulas with addition of grog, superior priorities to the requested by the requirements for semi porous and for the formula to F2-2,5 superior priorities to standard formulas which justifies the incorporation of the shingles in mass for the semi porous ceramic

Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais

There are ores of clay in Piauí State that are used for red structural ceramics, which are naturally contaminated with calcareous vein. This is one thing that impedes its exploration in an adequate way, especially for tile production. The present work aims at verifying the influence of the calcareous contents in the technological structural ceramics area, seeking to determine a maximum permissible calcareous proportion/contents in the ceramic mass using the patterns of the local industry production. For the consecution of this paper, it was characterized the clay and calcareous material by FRX, DRX, TGA and DTA. It was also configurated by extrusion and burnt in the temperatures of 850°C, 900°C, 950°C and 1000°C pieces of the corpus with 0, 5, 10, 15 e 20% of calcareous proportion. After that, it was carried out technological samples of linear retraction, water absortion, apparent porosity, specific apparent mass and mechanic resistance. The results showed the possibility of using calcareous in the ceramic mass and in some cases the technological properties got better