Uso da glicerina oriunda da síntese do biodiesel em sistemas microemulsionados visando aplicação de herbicidas

The program PROBIODIESEL from the Ministry of Science and Technology has substantially increased glycerine, obtained as a sub-product of biodiesel production process, making it necessary to seek alternatives for the use of this co-product. On the other hand, herbicides although play a role of fundamental importance in the agricultural production system in force, have been under growing concern among the various segments of society because of their potential environmental risk. In this work, we used glycerin in microemulsion systems for application of herbicides, to improve efficiency and lower environmental pollution caused by the loss of those products to the environment. To obtain the systems of microemulsinados were used Unitol L90 NP and Renex 40 as surfactants, butanol as co-surfactant, coconut oil as oil phase and aqueous phase as we used solutions of glycerin + water. Through the determination of phase diagrams, the microemulsion region was found in the system E (L90 Unitol, coconut oil and glycerin + water 1:1). Three points were chosen to the aqueous phase rich in characterization and application in the solubilization of glyphosate and atrazine. Three experiments were performed in Horta, Department of Plant Sciences, Plant Science Sector, UFERSA, Mossoró-RN. The first experiment was conducted in randomized complete blocks with 20 treatments and four replications. The treatments consisted of five doses of the herbicide glyphosate (0.0, 0.45, 0.9, 1.35 and 1.8 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity of Brachiaria brizantha was measured at 7, 14, 28 and 60 DAA (days after application). At 60 DAA, we evaluated the biomass of plants. The second experiment was developed in randomized complete blocks with 20 treatments and four repetitions. The treatments consisted of five doses of the herbicide atrazine (0.0, 0.4, 0.8, 1.6 and 2.4 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity on Zea mays and Talinum paniculatum was evaluated at 2, 7, 20 DAA. The experiment III was developed in randomized complete blocks with 16 treatments and three repetitions. The treatments consisted of 16 combinations among the constituents of the microemulsion: Unitol L90 surfactant (0.0, 1.66, 5.0, 15 %) and glycerin (0.0, 4.44, 13.33 and 40.0 %). The phytotoxicity on Zea mays was evaluated at 1, 7 and 14 DAA. At 14 DAA, we evaluated the biomass of plants. The control plants using the microemulsions was lower than in the water due to the poisoning caused by the initial microemulsions in the leaves of the plants, a fact that hinders the absorption and translocation of the herbicide. There was no toxicity in Zea mays plants caused by the herbicide, however, were highly intoxicated by microemulsions. T. paniculatum was better controlled in spraying with the microemulsions, regardless of the dose of the herbicide. The glycerine did not cause plant damage. Higher poisoning the plants are caused by tensoactive Unitol L90 and higher rates occur with the use of higher concentrations of surfactant and glycerin, or microemulsion. The microemulsions used hampered the action of glyphosate in controlling B. brizantha and caused severe poisoning in corn, and these poisonings attributed mainly to the action of surfactant

Sistema inteligente para apoio à decisão na operação de uma malha de escoamento de petróleo

The petroleum production pipeline networks are inherently complex, usually decentralized systems. Strict operational constraints are applied in order to prevent serious problems like environmental disasters or production losses. This paper describes an intelligent system to support decisions in the operation of these networks, proposing a staggering for the pumps of transfer stations that compose them. The intelligent system is formed by blocks which interconnect to process the information and generate the suggestions to the operator. The main block of the system uses fuzzy logic to provide a control based on rules, which incorporate knowledge from experts. Tests performed in the simulation environment provided good results, indicating the applicability of the system in a real oil production environment. The use of the stagger proposed by the system allows a prioritization of the transfer in the network and a flow programming

Evolução diagenética e caracterização dos reservatórios da seção devoniana na Bacia do Rio do Peixe-Nordeste do Brasil

The Rio do Peixe Basin represents a main basin of northeastern Brazil and pioneering work positioned the rocks of this basin in the Early Cretaceous. However, a recent study, based on integrated pollen analysis from three wells, found an unprecedented siliciclastic sedimentary section, in the region, of early Devonian age. Therefore, the present study aims a detailed petrographic and petrological analysis of this devonian section, in the Rio do Peixe Basin and proposes a diagenetic evolution, to understand the characteristics of the porous system, identify the main reservoir petrofacies with the main factors impacting on the quality of these rocks as reservoirs and a quick study on the provenance of this section. The petrographic study was based on samples obtained from subsurface and surface. The diagenetic evolution of petrofacies and its identification were based only on subsurface samples and the study of provenance was based on surface samples. The thin sections were prepared from sandstones, pelites and sandstones intercalated with pelites. The original detrital composition for this section is arcosean and the main diagenetic processes that affected these rocks occur in various depths and different conditions, which resulted in extensive diagenetic variety. The following processes were identified: early fracture and healing of grains; albitization of K-feldspar and plagioclase; siderite; precipitation of silica and feldspar; mechanical infiltration of clay and its transformation to illite/esmectite and illite; autigenesis of analcime; dissolution; autigenesis of chlorite; dolomite/ferrous dolomite/anquerite; apatite; calcite; pyrite; titanium minerals and iron oxide-hidroxide. The occurrence of a recently discovered volcanism, in the Rio do Peixe Basin, may have influenced the diagenetic evolution of this section. Three diagenetic stages affected the Devonian section: eo, meso and telodiagenesis. This section is compositionally quite feldspathic, indicating provenance from continental blocks, between transitional continental and uplift of the basement. From this study, we observed a wide heterogeneity in the role of the studied sandstones as reservoirs. Seven petrofacies were identified, taking into account the main diagenetic constituent responsible for the reduction of porosity. It is possible that the loss of original porosity was influenced by intense diagenesis in these rocks, where the main constituent for the loss of porosity are clays minerals, oxides and carbonate cement (calcite and dolomite)

Contribuição à citogenética de testudines e análise de assimetria flutuante em Eretmochelys imbricata, Cheloniidae

This work has contributed to knowledge of the order Testudines from cytogenetic and morphological point of view. With regard to the aspects proposed cytogenetic characterization of the species Mesoclemmys tuberculata (n = 5), endemic to the Caatinga biomes, through conventional techniques of cytogenetics and molecular levels. This species presented 2n = 58, NF = 64, the first submetacentric pair, the second metacentric and third subtelocentric, and the other microchromosome telocentric. This species showed a nucleolar bearing pair, coincident with the 18S ribosomal rDNA and that proved to be heterochromatic. Small heterochromatic blocks were also found in the centromeres of the largest chromosomes, as well as terminal regions in most other chromosomes of the complement, that were GC +. Telomeric sequences showed variable patterns of signal intensity, with some repeats more intense in microchromosomes and subtly in the larger ones. When compared with other species of the genus, the G-banding patterns showed a marked similarity between them. The first karyotypic description of the species will aid in future studies and the understanding of evolutionary aspects of this family. From the morphological point of view, we carried out studies of fluctuating asymmetry in sea turtle Eretmochelys imbricata, using methods of benchmarking between hatchlings and adults and their implications for natural selection. Data were collected at two different times: first during the spawning female and the second during the outbreak and birth of the nest. The analyzed characteristics consisted of measurements of length and width of front and rear flippers (CANT, LANT, CPOS and LPOS) also collected data on the number of hull plates, side plates (NPL), the surrounding plates (NPCIRC), and plastron; plates power plants (NPP), inframarginais plates (NPIM). With the values of asymmetry we calculated the value of strict heritability for these traits, the calculation was based on only one parent. A nonparametric analysis Mann-Whitneywas performed to compare the groups (females X hatchlings, newborn hatchlings X dead hatchlings). Adult females showed no bilateral fluctuating asymmetry (FA = 0) on the number plates of the hull and plastron, while offspring, living and dead, showed a greater level of variation in these meristic parameters. In the analysis of females x hatchlings we found a significant difference between the levels of asymmetry in hoof plates (p=0.006) an the width of hindlimbs (p=0.001). Levels of FA suggest an accurate indicator as to the viability or maintenance of the individual to the reproductive phase. The coefficient of heritability (h2) of FA , obtained from the regression analysis, showed that both have low and not statistically significant values(p> 0.1). In the case of exclusion of the effective role of genetics in the generation of FA, reproductive strategies based on high number of subsidiaries products, such as those observed in E. imbricata seems to implicate the production of individuals with high level of developmental instability

O papel de interações positivas entre plantas na regeneração de áreas degradadas na caatinga

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Ajudando os inimigos: espécies nativas facilitam a invasão do semiárido brasileiro por árvores exóticas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relações internacionais: o comércio exterior do Brasil e Rio Grande do Norte no período de 1999 a 2008

The period post-war promoted several changes in relations economic, political and social world. Since then, a new division international of labor has delineated, with the great growth of Asian countries. In the field of international relations, the world still appears to transition is not completed because the old institutions were not replaced by new ones and the power of the United States as a major capitalist country remains unshaken, even with the emergence and strengthening of new economic global blocs. With globalization, Brazil emerges with more intensity in the face of new issues global, although its share in transactions trade global hasn‟t changed accordingly. In this sense, the objective of this dissertation is to examine, in a descriptive and critical the development of international relations and trade of Brazil and Rio Grande do Norte with the main blocs in the world from 1999 to 2008. As a secondary objective: to identify the assumptions theoretical that underpinned the decisions governments of the FHC and Lula, in particular, the interference of these terms in international relations and foreign trade. Adopted as the procedure methodological the literature review of the subject, as well as collection and processing of the data of foreign trade. During the Cardoso government has undergone the substantial growth in imports, as part of the economic policy of anti-inflationary, generating large deficits trade. From the first to the second term, with the inflection of exchange rate policy the country has resumed surpluses trade. The choice of government of the autonomy participation increased the relative share of the traditional blocks in total foreign trade and reduced the share of MERCOSUL. In the Lula government, there is the maintenance of some elements of the economic policy of the previous government and the partial shift in the conduct of foreign policy, with the option of autonomy through diversification, raising its stake on the blocks and other emerging countries in total foreign trade Brazilian and reducing the contribution of the traditional blocks such as NAFTA and the European Union. A trend observed in the previous government and deepened in the Lula government was the growth in commodity exports and the decline of manufactured products, confirming the model of conservative insertion of Brazilian exports. The Rio Grande do Norte followed the trend Brazilian in the growth of foreign trade, including in participating conservative, given that the products exported by the state are basically coming from horticulture irrigated and agribusiness. However, in the aspect of destination export, the state followed trajectory distinct from that in the Lula government, with the deepening of trade relations with traditional blocks, especially with the European Union and NAFTA

Os saberes em potencial da atividade policial ostensiva: sistematizando modelos a partir da experiência potiguar

This work of research presents an investigation into the knowledge related to the ostensive policing activities of a group of the Rio Grande do Norte State Military Police Captains. This knowledge, which is decisive and part of Brazilian Military Police Constitutional matters, must be taken into consideration when it comes down to planning and putting into force the services related to ostensive public security. Thus, a historical and social analysis about the formation of the police by starting from foreigner experiences down to Rio Grande do Norte s reality, led by such knowledge, was made. Further, studying Brazilian and local scene, this knowledge was analyzed on the ostensive policing activities as for the principles of the Brazilian National Public Security Plan, Brazilian Classification of Occupations / CBO 2002, the reference documents and studies for police graduation Curricular Basis and Matrix; the Variables of Ostensive Policing, as well as some important competences of police service. Arguing that this knowledge is somehow related to what is presented in this work as Orientation Axis to Military Police Service , research tools such as Critical Case Solution and the answers to the Questionnaire on Fundamental Areas of Military Police Service , having in the end six knowledge models related to ostensive policing activities were used within that group. This knowledge can be classified in three distinct categories of connotations within the military police activity: one with reactive/repressive characteristics being the most predominant; the second as preventive; and another one that revealed that the military police activity is being misused for actions and/or missions outside the scope of action of military police

As ações de controle da tuberculose na atenção primária à saúde: a visão do doente

Tuberculosis is a disease of great impact on the world context today. In Brazil, the disease management was directed to the Primary Health Care, due to the determination of the Ministry of Health to decentralize health actions for primary care. Thus, since the actions of diagnosis, treatment and control of the disease should happen in this context, however, there are still many barriers that may hinder the realization of these determinations. This study aims to analyze the development of tuberculosis control activities conducted in the services of primary health care from the patient's vision. This is a descriptive, cross-sectional and quantitative study. The population consists of 517 tuberculosis patients treated in units of Primary Health Care in the city of Natal-RN; the sample consists of 93 TB patients. The collect instrument is structured, based in The Primary Care Assessment Tool (PCAT), validated in Brazil and adapted to assess attention to TB in Brazil, with modifications. This instrument was divided into blocks: the first one describes the socio-demographic information of patients with TB and the second one describes the health services working in control, diagnosis and treatment of TB, and includes issues related to the dimensions of primary care: access, bond, services, coordination of care, guidance to the community and family focus. For quantitative analysis, were built indicators for each item of the instrument. The response patterns are followed according to the Likert scale, which was assigned a value between one and five meant that the degree of preference relation (or agreement) of the statements. Values between 1 and 3 were considered unsatisfactory for the indicator, between 3 and less than 4, regular, and between 4 and 5, satisfactory. The results indicate that 62.37% of patients are male, 27.96% aged 41 to 50 years old, and 34.41% unemployed, with low education and low family income. It was found that the reference hospital services are the front door to the patient (59.14%), and are also the local diagnosis of the disease (72.04%). On access, the conditions satisfactory found are: the number of times the patients need to pick up the health care issue, the marking and the facility to get a consultancy in the HS, assistance provided without harm to the individual's attendance labor and facilities related to the proximity between the residence and services; were considered unsatisfactory conditions related to travel to the HS, and on hours and days of operation of services. As for the cast of services were satisfactory and regular actions related to the request for examination to become viable in the first HS, the availability of pot to perform smear and medicines for the treatment, as well as consultations control and receiving information about the disease and the treatment performed; it is considered unsatisfactory the performance of the home care for patients with TB by the HS that acts as a front door, for implementation of the Directly Observed Treatment (DOT), home visits during treatment, the provision of transportation allowance to the patient and the existence of groups for TB patients. Regarding the coordination of care, resulted in regular the action of referring the patient to other HS to obtain examinations, and as unsatisfactory referral to obtain medications. The relationship bond between patient and health team were considered satisfactory in the majority or regular. As for the family and community focus, is satisfactory only the indicator relating to questions from professionals to the patient about the existence of respiratory symptoms in the family. It is considered that there is need for greater commitment from government entities to the incentives required to TB control, as well as the availability of necessary inputs and training of human resources working in the PHC in the ongoing quest to strengthen primary care, as a place of broader host needs to contact the user with the actions and health professionals. It is recommended the adoption of management mechanisms possible to expand the capacity of the health PHC, promoting the service delivery to the user and ensuring attention to population health.

Algoritmos inteligentes para auto-correção, auto-verificação e auto-validação de medidas em sensores

This work presents a set of intelligent algorithms with the purpose of correcting calibration errors in sensors and reducting the periodicity of their calibrations. Such algorithms were designed using Artificial Neural Networks due to its great capacity of learning, adaptation and function approximation. Two approaches willbe shown, the firstone uses Multilayer Perceptron Networks to approximate the many shapes of the calibration curve of a sensor which discalibrates in different time points. This approach requires the knowledge of the sensor s functioning time, but this information is not always available. To overcome this need, another approach using Recurrent Neural Networks was proposed. The Recurrent Neural Networks have a great capacity of learning the dynamics of a system to which it was trained, so they can learn the dynamics of a sensor s discalibration. Knowingthe sensor s functioning time or its discalibration dynamics, it is possible to determine how much a sensor is discalibrated and correct its measured value, providing then, a more exact measurement. The algorithms proposed in this work can be implemented in a Foundation Fieldbus industrial network environment, which has a good capacity of device programming through its function blocks, making it possible to have them applied to the measurement process

Especificação de um bloco funcional implementando rede neural para redes industriais foundations fieldbus

This work proposes the specification of a new function block according to Foundation Fieldbus standards. The new block implements an artificial neural network, which may be useful in process control applications. The specification includes the definition of a main algorithm, that implements a neural network, as well as the description of some accessory functions, which provide safety characteristics to the block operation. Besides, it also describes the block attributes emphasizing its parameters, which constitute the block interfaces. Some experimental results, obtained from an artificial neural network implementation using actual standard functional blocks on a laboratorial FF network, are also shown, in order to demonstrate the possibility and also the convenience of integrating a neural network to Fieldbus devices

Otimização de modelos de predição da perda de propagação aplicáveis em 3,5GHZ utilizando algoritmos genéticos

The telecommunications industry has experienced recent changes, due to increasing quest for access to digital services for data, video and multimedia, especially using the mobile phone networks. Recently in Brazil, mobile operators are upgrading their networks to third generations systems (3G) providing to users broadband services such as video conferencing, Internet, digital TV and more. These new networks that provides mobility and high data rates has allowed the development of new market concepts. Currently the market is focused on the expansion of WiMAX technology, which is gaining increasingly the market for mobile voice and data. In Brazil, the commercial interest for this technology appears to the first award of licenses in the 3.5 GHz band. In February 2003 ANATEL held the 003/2002/SPV-ANATEL bidding, where it offered blocks of frequencies in the range of 3.5 GHz. The enterprises who purchased blocks of frequency were: Embratel, Brazil Telecom (Vant), Grupo Sinos, Neovia and WKVE, each one with operations spread in some regions of Brazil. For this and other wireless communications systems are implemented effectively, many efforts have been invested in attempts to developing simulation methods for coverage prediction that is close to reality as much as possible so that they may become believers and indispensable tools to design wireless communications systems. In this work wasm developed a genetic algorithm (GA's) that is able to optimize the models for predicting propagation loss at applicable frequency range of 3.5 GHz, thus enabling an estimate of the signal closer to reality to avoid significant errors in planning and implementation a system of wireless communication

Arquitetura de controladores fuzzy em redes foundation fieldbus

Foundation Fieldbus Industrial networks are the high standard technology which allows users to create complex control logic and totally decentralized. Although being so advanced, they still have some limitations imposed by their own technology. Attempting to solve one of these limitations, this paper describes how to design a Fuzzy controller in a Foundation Fieldbus network using their basic elements of programming, the functional blocks, so that the network remains fully independent of other devices other than the same instruments that constitute it. Moreover, in this work was developed a tool that aids this process of building the Fuzzy controller, setting the internal parameters of functional blocks and informing how many and which blocks should be used for a given structure. The biggest challenge in creating this controller is exactly the choice of blocks and how to arrange them in order to effectuate the same functions of a Fuzzy controller implemented in other kind of environment. The methodology adopted was to divide each one of the phases of a traditional Fuzzy controller and then create simple structures with the functional blocks to implement them. At the end of the work, the developed controller is compared with a Fuzzy controller implemented in a mathematical program that it has a proper tool for the development and implementation of Fuzzy controllers, obtaining comparatives graphics of performance between both

Um sistema para simular o comportamento de bancos trifásicos de reguladores de tensão usados em sistemas de distribuição de energia elétrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Identificação em tempo real de modelo dinâmico de robô móvel com acionamento diferencial e zona morta

Several mobile robots show non-linear behavior, mainly due friction phenomena between the mechanical parts of the robot or between the robot and the ground. Linear models are efficient in some cases, but it is necessary take the robot non-linearity in consideration when precise displacement and positioning are desired. In this work a parametric model identification procedure for a mobile robot with differential drive that considers the dead-zone in the robot actuators is proposed. The method consists in dividing the system into Hammerstein systems and then uses the key-term separation principle to present the input-output relations which shows the parameters from both linear and non-linear blocks. The parameters are then simultaneously estimated through a recursive least squares algorithm. The results shows that is possible to identify the dead-zone thresholds together with the linear parameters