Avaliação de efeitos biológicos de antiinflamatórios derivados do ácido propiônico através de modelos experimentais em nível molecular e celular

Derivatives of propionic acid NSAIDs are irreversible inhibitors of cyclooxygenase enzyme widely used. The aim of this study was to evaluate, through different experimental models, biological effects of derivatives of propionic acid (fenoprofen, naproxen, ibuprofen and ketoprofen) in cellular and molecular level. The labeling of blood constituents with technetium-99m (99mTc) and morphological analysis of erythrocytes of blood of rats, as well as growth, survival of cultures of Escherichia coli (E. coli) and the assessment of bacterial plasmid electrophoretic profiles were models used for experimental evaluation of possible biological effects of antiinflammatory drugs. The results show that, in general, anti-inflammatory drugs evaluated were not able to alter the labeling of blood constituents with 99mTc, the morphology of red blood cells from blood of rats, as well as the growth of cultures of E. coli and the electrophoretic profile of plasmid DNA. However, naproxen appears to cytotoxic effect on bacterial cultures, plasmids and genotoxic effects in reducing the action of stannous chloride in cultures of E. coli. The use of experimental fast performance and low cost was important for assessment of biological effects, contributing to a better understanding of the properties of propionic acid derivatives studied. anti-inflammatory, blood constituents, technetium-99m, stannous chloride, Escherichia coli; DNA

Análise in vitro da atividade antifúngica e de toxicidade da anfotericina B pré-aquecida

The aim of this work was to evaluate how an aqueous micellar system containing Amphotericin B (AmB) and sodium deoxycholate (DOC) can be rebuilt after heating treatment. Also a review of the literature about the new physicochemical and biological properties of this new system was carried out. Afterwards, heated (AmB-DOC-H) and unheated (AmB-DOC) micelles were subsequently diluted at four different concentrations (50mg.L-1, 5mg.L-1, 0.5mg.L-1 and 0.05mg.L-1) to perform the physicochemical study and, then, the pharmacotoxicity assay, in which two cell models were used for the in vitro experiments, Red Blood Cells (RBC) from human donors and Candida parapisilosis (Cp). While potassium (K+) and hemoglobin leakage from RBC were the used parameters to evaluate the acute and chronic toxicity, respectively, the efficacy of AmB-DOC and AmB-DOC-H were assessed by K+ leakage and cell survival rate from Cp. The spectral study revealed a slight change on the aggregate peak from 327nm to 323nm for AmB-DOC-H compared to AmB-DOC. Concerning the toxicity, although AmB-DOC and AmB-DOC-H presented different behavior for hemoglobin leakage, AmB-DOC produced higher leakage than AmB-DOC-H at high concentrations (from 5mg.L-1) with values tending to zero. However, concerning K+ leakage, both AmB-DOC and AmB-DOC-H, showed similar profile for both cell models, RBC and Cp (p<0,05). AmB-DOC-H and AmB-DOC also revealed similar profile of activity against Cp with equivalent survival rate. In short, the AmB-DOC-H showed much less toxicity than AmB-DOC, but remained as active as the late one against fungal cell. Therefore, the results highlight the importance of this new procedure as a simple, inexpensive and safe alternative to produce a new kind of micelle system for treatment of systemic fungal infections

Síndrome metabólica e fatores de risco relacionados em crianças e adolescentes com excesso de peso na cidade do Natal

Nas últimas décadas, houve grande aumento da prevalência de obesidade, inclusive na faixa etária pediátrica. Com isso, aumentou o número de crianças e adolescentes afetados por síndrome metabólica (SM), diabetes tipo 2 (DM2) e doenças cardiovasculares (DCV), doenças anteriormente consideradas quase exclusivas de adultos. Os objetivos do estudo foram identificar e correlacionar marcadores antropométricos (IMC- índice de massa corpórea, CA- circunferência abdominal, RCQ- razão cintura/quadril, RCArazão cintura altura e PSE- prega subescapular), PAS e PAD- pressão arterial sistólica e diastólica, respectivamente, e laboratoriais (CT- colesterol total, HDL, LDL, TGL- triglicérides, I/G- razão insulina glicose, HOMA- homeostatic model assessment for insulin resistance) de risco para o desenvolvimento de SM e observar a sua prevalência em crianças e adolescentes com excesso de peso. Foi conduzido estudo transversal, em amostra aleatória, de conveniência, onde foram avaliadas 60 crianças e adolescentes com excesso de peso, atendidas no ambulatório de endocrinologia pediátrica do Hospital de Pediatria da Universidade Federal do Rio Grande do Norte (UFRN) com idade mínima e máxima de 7 e 15 anos, de maio de 2009 a abril de 2010. Foram admitidos os indivíduos que apresentavam sobrepeso (IMC P > 85 e < 95) ou obesidade (IMC P > 95) (CDC, 2000) e história familiar positiva para DM2 em parentes de primeiro ou segundo grau ou algum dos sinais de resistência insulínica (acantose, hipertensão arterial, dislipidemia, síndrome de ovários policísticos). 2 O componente individual para SM mais prevalente foi o percentil da CA ≥ 90 (58,3%), seguido de HDL ≤ 40 mg/dl (36,6%). Na regressão linear simples, observaram-se as variações para mais nos parâmetros laboratoriais e de PA para cada unidade de aumento de IMC, CA, RCA, RCQ e PSE, sendo significantes as seguintes correlações: CA com TGL, HOMA IR, I/G, PAS e PAD; RCQ com TGL, HOMA, I/G, LDL e glicemia; RCA com TGL; PSE com TGL, HOMA-IR, I/G e PAS; e IMC com HOMA IR, I/G, PAS e PAD. De acordo com os critérios da IDF (Federação Internacional de Diabetes International Diabetes Federation) 2007, o diagnóstico de SM foi encontrado em seis indivíduos (10%). Do total, oito (13,3%), estavam em situação de sobrepeso e 52 (86,6%), obesos. As evidências de correlação CA e RCQ, medidas de obesidade centrípeta, com vários marcadores como TGL e HOMA, já sabidamente relacionados à SM, chamam atenção para a necessidade de utilização dessas medidas de forma mais rotineira na prática pediátrica, por serem de fácil obtenção, baixo custo e método não invasivo. Os valores de CA, RCQ, RCA e PSE, quando elevados devem justificar maior detalhamento na avaliação laboratorial de possível resistência insulínica. É importante a identificação de crianças e adolescentes que preencham os requisitos para o diagnóstico da SM, pois são indivíduos de maior risco metabólico e devem ser adequadamente acompanhados.

Tratamento de fístulas enterocutâneas através de sistema a vácuo com alta pressão e dieta oral normal

Enterocutaneous fistulas are associated with prolonged hospital stay, high morbidity/mortality, and increase in hospital costs. This study aims to describe the use of a vacuum system and normal oral diet in dealing with this problem. Methods: Seventy-four consecutive patients with recent and defined external postoperative fistulas were analyzed. Abdominal imaging was used to exclude abscess and distal obstruction. The fistula tract was sealed with Foley catheter, connected to a negative pressure flask, changed daily for 5, 10 or 15 days, as necessary. Normal oral diet was permitted. Results: No patient died. Serum albumin and transferrin showed significantly higher levels at the end of treatment than at the beginning. The moderate and low-output fistulas had the best results (97% closed). Forty-eight (65%) fistulas closed after five days, 16(22%) after 10 days and 4(5%) after 15 days. Treatment failed in 6(8%) patients, who subsequently underwent surgery. Only one patient with low-output did not close her fistula. The cost of the treatment was US$ 41.75/day and it was considered cost effective. Conclusions: The vacuum system demonstrated good results in the treatment of fistulas. It included simplicity, low cost, short hospital stay, absence of skin breakdown, normal eating, good nutrition and activity patterns

Liofilização como ferramenta de preservação de sêmen humano

Liofilização é um método alternativo de preservação de espermatozóide, com vantagens sobre o criopreservado pelo baixo custo de armazenamento, facilidade no transporte pela não necessidade de containers e baixas taxas de contaminação. Esse estudo foi realizado no intuito e testar a eficácia de 5 açúcares na proteção do material cromossômico (DNA) de espermatozoides humanos liofilizados após reidratação. Para isso foram utilizados espermatozoides de indivíduos classificados como normozooespérmicos segundo OMS. Em eppendorfs foram colocados 1ml de sêmen que foram diluídos (1:1) em 1 ml de solução de Glicose, Lactose, Maltose, Manitol e Sorbitol, separadamente, nas concentrações 0.2M, 0.4M, 0.5M e 0.6M. Essas amostras foram analisadas em duas fases a primeira após congelamento observando a porcentagem de células com danos de membrana e outra análise após a liofilização, utilizando o Teste Cometa para detectar as taxas de fragmentação de DNA dos espermatozoides recuperadas após reidratação. O processo de liofilização de espermatozoides não foi capaz de recuperar a motilidade dos mesmos, mas foi capaz de manter 62.30 ± 13.76% de membrana plasmática intacta na presença de 0.6M manitol. As substâncias que melhor preservaram o DNA dessas células foram 0.2 lactose, 0.2M e 0.6M manitol e sorbitol, com apenas 4% de danos ao DNA. Esses resultados sugerem uma boa proteção ao DNA de espermatozoides humanos liofilizados, mas ainda requer testes adicionais para avaliar a fertilização e estudos que garantam a viabilidade da prole

Nanosistemas de penicilina G benzatina para tratamento profilático da febre reumática: estudo analítico

Investigations in the field of pharmaceutical analysis and quality control of medicines require analytical procedures with good perfomance characteristics. Calibration is one of the most important steps in chemical analysis, presenting direct relation to parameters such as linearity. This work consisted in the development of a new methodology to obtain calibration curves for drug analysis: the stationary cuvette one. It was compared to the currently used methodology, and possible sources of variation between them were evaluated. The results demonstrated that the proposed technique presented similar reproducibility compared to the traditional methodology. In addition to that, some advantages were observed, such as user-friendliness, cost-effectiveness, accuracy, precision and robustness. Therefore, the stationary cuvette methodology may be considered the best choice to obtain calibration curves for drug analyis by spectrophotometry

Programa nova semente em perspectiva (2009-2012): uma avaliação de processo

Historically the provision of childcare facilities in Brazil was short of demand. This problem affects a large part of the population and has a tendency to worsen, due to the accelerated decline in the number of parents of dedication exclusive family. The program called "Nova Semente" seeks to accelerate the creation of childcare facilities in the county, enabling the opening of units at low cost and in record time, through partnerships between government, non-governmental and civil society organizations. This study conducted a process evaluation of the implementation of public policy, to identify the strengths and weaknesses of the policy. In real terms, this paper seeks to understand the motivation for the development of the program, identifying the reasons set out in the project match what is being sent; Understand how it is giving practical partnership between the government entity and the entities "non-state"; Identify the degree of achievement of goals that should be met even in the implementation phase; verify employment of instruments provided for its implementation. For this, the literature of public policy evaluation is used, and fits the criteria and mechanisms for analysis in the assessment of efficacy, to answer the question motivating the work, which deals with uncertainty about the durability of the Program. the framework is the criteria and mechanisms for analysis in the assessment of efficacy, to answer the question motivating the work, which deals with uncertainty about the durability of the Program

Desenpenho aeróbio e controle autonômico cardíaco em idosas praticantes de tai chi chuan e sedentárias

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Avaliação de concreto com adição de fibras de PET submetido a altas temperaturas

The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element

Proposta de um modelo de gestão da qualidade para micro e pequenas empresas integrando a estratégia seis sigma à NBR ISO 9001

This work has as its main purpose to set a model of Quality Management for micro and small companies integrating the management models: Six Sigma strategy to NBR ISO 9001:2000. An exploratory research is developed to collect technical and bibliographical information on both methods, emphasizing their integration. Then, a survey is carried out on 65 analysts/consultants of Quality Management Systems and it has detected, besides other factors, that current methodologies must be associated in order to reach better results. At last, it proposes the Sigma 9001 model, which aims to make it possible for micro and small companies to objectively and with low costs, implement a Quality Management System, able to assure competitive advantage through improvement identification in the processes, as well as an improvement in the companies management

Análise comparativa dos métodos de fatores ponderados na seleção de áreas para aterros sanitários

This study presents a comparative analysis of methodologies about weighted factors considered in the selection of areas for deployment of Sanitary Landfills, applying the methodologies of classification criteria with scoring bands Gomes, Coelho, Erba & Veronez (2000); Waquil et al, 2000. That means, we have the Scoring System used by Union of Municipalities of Bahia and the Quality Index Landfill Waste (IQR) which are applyed for this study in Massaranduba Sanitary Landfill located in the municipality of Ceará Mirim /RN, northeastern of Brazil. The study was conducted in order to classify the methodologies and to give support for future studies on environmental management segment, with main goal to propose suited methodologies which allow safety and rigor during the selection, deployment and management of sanitary landfill, in the Brazilian municipalities, in order to help them in the process to extinction of their dumps, in according of Brazilian Nacional Plan of Solid Waste. During this investigation we have studied the characteristics of the site as morphological, hydrogeological, environmental and socio-economic to permit the installation. We consider important to mention the need of deployment from Rio Grande do Norte State Secretary of Environment and Water (SEMARH), Institute of Sustainable Development and Environment of RN (IDEMA), as well, from Federal and Municipal Governments a public policies for the integrated management of urban solid waste that address environmental preservation and improvement of health conditions of the population of the Rio Grande do Norte

Um Estudo de Politicas e Práticas do uso do GNV no transporte público urbano do Brasil

The use of Natural Gas Vehicle has had a fast increase lately. However, in order to have a continuous success this Program needs to develop converting devices of Otto-cycle engines, gasoline or alcohol, to the use of NGV (Natural Gas Vehicle) that presents low cost, maintaining the same original development of the vehicle and low level of emissions, considering the PROCONVE rules. Due to the need to diversify the matrix in order to avoid energetic dependence and due to strict pollution control, it has increased in the Brazilian market the number of vehicles converted to the use of NGV. The recent regulation of the PROCONVE, determining that the converted engines with kits should be submitted to emission testing, comes to reinforce the necessity of the proposed development. Therefore, if we can obtain kits with the characteristics already described, we can reach a major trust in the market and obtain an increase acceptance of the vehicle conversion for NGV. The use of natural gas as vehicle fuel presents several advantages in relation to liquid fuels. It is a vehicle fuel with fewer indexes of emissions when compared to diesel; their combustion gases are less harmful, with a major level of safety than liquid fuels and the market price is quite competitive. The preoccupation that emerges, and the motivation of this project, is to know which are the main justifications for such technology, well accepted in other countries, with a low index or emission, with a high level of safety, where its maintenance becomes low, reminding that for this it is necessary that this technology has to be used properly, and once available in the market will not motivate interest in the urban transportation companies in Brazil, in research centers in general. Therefore this project exists to show the society in a general way the current vision of the main governmental factors, of the national research centers and of the private companies concerning the use of natural gas vehicles in urban transport vehicles, in order to give a major reliability to the population as well as to motivate national market competitiveness with a low cost and reliable product and to enrich the national technology

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Estudo do acoplamento entre superfícies seletivas de frequência assimétricas em estruturas de multicamadas

This work presents the development of new microwaves structures, filters and high gain antenna, through the cascading of frequency selective surfaces, which uses fractals Dürer and Minkowski patches as elements, addition of an element obtained from the combination of the other two simple the cross dipole and the square spiral. Frequency selective surfaces (FSS) includes a large area of Telecommunications and have been widely used due to its low cost, low weight and ability to integrate with others microwaves circuits. They re especially important in several applications, such as airplane, antennas systems, radomes, rockets, missiles, etc. FSS applications in high frequency ranges have been investigated, as well as applications of cascading structures or multi-layer, and active FSS. In this work, we present results for simulated and measured transmission characteristics of cascaded structures (multilayer), aiming to investigate the behavior of the operation in terms of bandwidth, one of the major problems presented by frequency selective surfaces. Comparisons are made with simulated results, obtained using commercial software such as Ansoft DesignerTM v3 and measured results in the laboratory. Finally, some suggestions are presented for future works on this subject

Análise e síntese de antenas e superfícies seletivas de frequência utilizando computação evolucionária e inteligência de enxames

The frequency selective surfaces, or FSS (Frequency Selective Surfaces), are structures consisting of periodic arrays of conductive elements, called patches, which are usually very thin and they are printed on dielectric layers, or by openings perforated on very thin metallic surfaces, for applications in bands of microwave and millimeter waves. These structures are often used in aircraft, missiles, satellites, radomes, antennae reflector, high gain antennas and microwave ovens, for example. The use of these structures has as main objective filter frequency bands that can be broadcast or rejection, depending on the specificity of the required application. In turn, the modern communication systems such as GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi and WiMAX, whose services are highly demanded by society, have required the development of antennas having, as its main features, and low cost profile, and reduced dimensions and weight. In this context, the microstrip antenna is presented as an excellent choice for communications systems today, because (in addition to meeting the requirements mentioned intrinsically) planar structures are easy to manufacture and integration with other components in microwave circuits. Consequently, the analysis and synthesis of these devices mainly, due to the high possibility of shapes, size and frequency of its elements has been carried out by full-wave models, such as the finite element method, the method of moments and finite difference time domain. However, these methods require an accurate despite great computational effort. In this context, computational intelligence (CI) has been used successfully in the design and optimization of microwave planar structures, as an auxiliary tool and very appropriate, given the complexity of the geometry of the antennas and the FSS considered. The computational intelligence is inspired by natural phenomena such as learning, perception and decision, using techniques such as artificial neural networks, fuzzy logic, fractal geometry and evolutionary computation. This work makes a study of application of computational intelligence using meta-heuristics such as genetic algorithms and swarm intelligence optimization of antennas and frequency selective surfaces. Genetic algorithms are computational search methods based on the theory of natural selection proposed by Darwin and genetics used to solve complex problems, eg, problems where the search space grows with the size of the problem. The particle swarm optimization characteristics including the use of intelligence collectively being applied to optimization problems in many areas of research. The main objective of this work is the use of computational intelligence, the analysis and synthesis of antennas and FSS. We considered the structures of a microstrip planar monopole, ring type, and a cross-dipole FSS. We developed algorithms and optimization results obtained for optimized geometries of antennas and FSS considered. To validate results were designed, constructed and measured several prototypes. The measured results showed excellent agreement with the simulated. Moreover, the results obtained in this study were compared to those simulated using a commercial software has been also observed an excellent agreement. Specifically, the efficiency of techniques used were CI evidenced by simulated and measured, aiming at optimizing the bandwidth of an antenna for wideband operation or UWB (Ultra Wideband), using a genetic algorithm and optimizing the bandwidth, by specifying the length of the air gap between two frequency selective surfaces, using an optimization algorithm particle swarm