Expressão imuno-histoquímica do ativador de plasminogênio do tipo uroquinase e seu receptor em carcinoma epidermoide de língua oral e sua relação com parâmetros clínico-patológicos

Squamous cell carcinoma (SCC ) is the most common malignancy of the oral cavity (OSCC), with a high mortality rate. Due to this, the discovery of biomarkers that facilitate the understanding of the biological behavior of the tumor and improve treatment is necessary. Urokinase type plasminogen activator (uPA) and its receptor, uPAR, are responsible for the proteolysis of structures of the basement membrana and extracellular matrix, facilitating tumor invasion. This study aims to assess the immuno expression of these proteins in 46 cases of squamous cell carcinoma of the oral tongue (OTSCC). These results were related to the presence of metastasis, clinical TNM staging, locoregional recurrence, outcome of the lesion and histological grading. Immunostaining of each case was evaluated semiquantitatively, in the front of invasion and center of the tumor, in which scores were assigned: 0 (0% of positive cells), 1 (1-10% of positive cells), 2 (11 -50% positive cells) and 3 (more than 50% positive cells). The expression of uPA was observed in 93.5% (n=43) of the cases in the front of invasion, with predominance of score 2 (n=16; 34.8%) and in 67.9% (n=31) of the cases in the center of the tumor, with predominance of score 1 (n=15; 32.6%). Overall, the immunoexpression of uPA was not associated with clinical parameters. Regarding the malignant histological grading, a higher expression of uPA was observed in cases of high-grade malignancy comp ared to low-grade malignancy (p=0.05). Regarding the morphological parameters, increased expression of uPA was observed in the worst mode of invasion (p=0.03 ). The expression of uPAR was observed in 73.9% of cases in the front of invasion, with a predominance of score 1 (n=21; 45.6 %), and in 47.5% (n=21) of the cases in the center of the tumor, with a predominance of score 0 (n=25; 54.4%). Although no statistical differences were observed in relation to lymph node metastasis, clinical TNM staging, outcome, and histological grading, there was a higher expression of uPAR in cases with locoregional recurrence (p=0.04). Regarding the tumor intra -localization, it was observed an increased expression of uPA and uPAR at the front of invasion in relation to the center of the tumor (p<0.001). Regarding the correlation between uPA and uPAR, there was no statistical sign ificance. Based on these results, it is suggested that uPA and uPAR are involved in the progression of CELO, mainly in the deeper region of the tumor.

Expressão imuno-histoquímica do ativador de plasminogênio do tipo uroquinase e seu receptor em carcinoma epidermoide de língua oral e sua relação com parâmetros clínico-patológicos

Squamous cell carcinoma (SCC ) is the most common malignancy of the oral cavity (OSCC), with a high mortality rate. Due to this, the discovery of biomarkers that facilitate the understanding of the biological behavior of the tumor and improve treatment is necessary. Urokinase type plasminogen activator (uPA) and its receptor, uPAR, are responsible for the proteolysis of structures of the basement membrana and extracellular matrix, facilitating tumor invasion. This study aims to assess the immuno expression of these proteins in 46 cases of squamous cell carcinoma of the oral tongue (OTSCC). These results were related to the presence of metastasis, clinical TNM staging, locoregional recurrence, outcome of the lesion and histological grading. Immunostaining of each case was evaluated semiquantitatively, in the front of invasion and center of the tumor, in which scores were assigned: 0 (0% of positive cells), 1 (1-10% of positive cells), 2 (11 -50% positive cells) and 3 (more than 50% positive cells). The expression of uPA was observed in 93.5% (n=43) of the cases in the front of invasion, with predominance of score 2 (n=16; 34.8%) and in 67.9% (n=31) of the cases in the center of the tumor, with predominance of score 1 (n=15; 32.6%). Overall, the immunoexpression of uPA was not associated with clinical parameters. Regarding the malignant histological grading, a higher expression of uPA was observed in cases of high-grade malignancy comp ared to low-grade malignancy (p=0.05). Regarding the morphological parameters, increased expression of uPA was observed in the worst mode of invasion (p=0.03 ). The expression of uPAR was observed in 73.9% of cases in the front of invasion, with a predominance of score 1 (n=21; 45.6 %), and in 47.5% (n=21) of the cases in the center of the tumor, with a predominance of score 0 (n=25; 54.4%). Although no statistical differences were observed in relation to lymph node metastasis, clinical TNM staging, outcome, and histological grading, there was a higher expression of uPAR in cases with locoregional recurrence (p=0.04). Regarding the tumor intra -localization, it was observed an increased expression of uPA and uPAR at the front of invasion in relation to the center of the tumor (p<0.001). Regarding the correlation between uPA and uPAR, there was no statistical sign ificance. Based on these results, it is suggested that uPA and uPAR are involved in the progression of CELO, mainly in the deeper region of the tumor.

Expressão de MMPs, marcadores angiogênicos e proliferação celular em tumores odontogênicos

INTRODUCTION AND OBJECTIVE: The study of biological behavior of odontogenic lesions is essential to the establishment of appropriate therapeutic approach and prognosis. The production of extracellular matrix metalloproteinases (MMPs), angiogenesis and cell proliferation contribute to tumor growth. This paper aims to review the literature on odontogenic tumors (OT) selected according to the new World Health Organization classification (WHO- 2005) by evaluating the expression of MMPs, angiogenic and cell proliferation. Furthermore, it aims to verify the relation between these markers and the biological behavior of these lesions. RESULTS: it was found that MMPs -1, -2, -7, -9 and -26 had a higher expression in both epithelial component and stroma, and 13 particularly in the stroma. Increased angiogenesis was observed in more aggressive OT. CD105 expression was higher in keratocystic odontogenic tumour (KOT) and CD34 in solid ameloblastomas (SA). It was observed a higher expression of Ki-67 and p53 in SA and KOT and a low cell proliferation rate in the adenomatoid odontogenic tumour (AOT). CONCLUSION: These results show that MMPs are involved in invasion and recurrence of some odontogenic lesions and are associated with the biological behavior of these tumors. Angiogenesis is critical to provide support to cell proliferation and these concomitant events are correlated with different levels of biological behavior in OT when compared to odontogenic cysts, hence the use of angiogenic inhibitors may be a potential therapeutic approach in these lesions.

Expressão de MMPs, marcadores angiogênicos e proliferação celular em tumores odontogênicos

INTRODUCTION AND OBJECTIVE: The study of biological behavior of odontogenic lesions is essential to the establishment of appropriate therapeutic approach and prognosis. The production of extracellular matrix metalloproteinases (MMPs), angiogenesis and cell proliferation contribute to tumor growth. This paper aims to review the literature on odontogenic tumors (OT) selected according to the new World Health Organization classification (WHO- 2005) by evaluating the expression of MMPs, angiogenic and cell proliferation. Furthermore, it aims to verify the relation between these markers and the biological behavior of these lesions. RESULTS: it was found that MMPs -1, -2, -7, -9 and -26 had a higher expression in both epithelial component and stroma, and 13 particularly in the stroma. Increased angiogenesis was observed in more aggressive OT. CD105 expression was higher in keratocystic odontogenic tumour (KOT) and CD34 in solid ameloblastomas (SA). It was observed a higher expression of Ki-67 and p53 in SA and KOT and a low cell proliferation rate in the adenomatoid odontogenic tumour (AOT). CONCLUSION: These results show that MMPs are involved in invasion and recurrence of some odontogenic lesions and are associated with the biological behavior of these tumors. Angiogenesis is critical to provide support to cell proliferation and these concomitant events are correlated with different levels of biological behavior in OT when compared to odontogenic cysts, hence the use of angiogenic inhibitors may be a potential therapeutic approach in these lesions.

Análise toxicológica in vitro e in vivo de uma fucana antitrombótica da alga marrom Spatoglossum schdöederi

Fucan is a term used to denominate a family of sulfated polysaccharides rich in L-fucose. They are extracted mainly from the extracellular matrix of brown algae and echinoderms. The brown alga Spatoglossum schröederi (Dictyotaceae) has three heterofucans named A, B and C. Our research group have been extracted non anticoagulant heterofucan from S. schröederi which possess antithrombotic activity in vivo. However, their toxicity in vitro and in vivo has not yet been determined. For the results in toxicity in vitro, we observed that the fucan A at 20, 500 and 1000 μg/plate showed no mutagenic activity in Kado test (Microsuspension), when the bacterial strains TA97a, TA98, TA100 and TA102, with and without S9 were used. The comet assay showed that fucan A (from 20 to 1000 μg/mL) did not cause any genotoxic effect on CHO cells. There was no damage to the DNA of these cells, as evidenced by the tail length and tail moment, which were similar to that found for the negative control. The fucan A from S. schröederi was administered at 20 μg/g of rat (dose which it showed high antithrombotic activity) during two months. After that, the animals were killed and examined. The data showed that fucan A did not cause any change in biochemistry and hematological parameters, as well as, in the morphology and size of the rat s organs analyzed. In conclusion, this study indicates that fucan is a compound with potential pharmacological that has no toxicity

Propriedades antioxidante, anti-hemostástica e antiproliferativa de galactanas sulfatadas da alga vermelha hypnea musciformis (wulfen) j. V. Lamouroux

Marine algae are one of the major sources of biologic compounds. In extracellular matrix of these organisms there are sulfated polysaccharides that functions as structural components and provides protection against dehydration. The fraction 1.0 (F1.0) rich in sulfated galactans obtained from red seaweed Hypnea musciformis was physicochemical characterized and evaluated for pharmacologic activity through antioxidant activity, cytotoxic action on erythrocytes, anticoagulant, stimulatory action under antithrombotic heparan sulfate synthesis and their effects on cell proliferation and cycle cell progression. The main components of F1.0 were carbohydrates (49.70 ± 0.10%) and sulfate (44.59 ± 0.015%), presenting phenolic compounds (4.79 ± 0.016%) and low protein contamination (0.92 ± 0.001%). Fraction 1.0 showed polidisperse profile and signs in infrared analysis in 1262, 1074 and 930, 900 and 850 attributed to sulfate esters S=O bond, presence of a 3,6- anidrogalactose C-O bond, non-sulfated β-D-galactose and a C-O-SO4 bond in galactose C4, respectively. The fraction rich in sulfated galactans exhibited strong antioxidant action under lipid peroxidation assay with IC50 of 0.003 mg/mL. Besides the inhibition of hemolysis induced by H2O2 in erythrocytes treated with F1.0, this fraction did not promote significant cytotoxity under erythrocytes membranes. F1.0 exhibited low anticoagulant activity causing moderate direct inhibition of enzimatic activity of thrombin. This fraction promoted stimulation around of 4.6 times on this synthesis of heparan sulfate (HS) by rabbit aortic endothelial cells (RAEC) in culture when was compared with non treated cells. The fraction of this algae displayed antiproliferative action under RAEC cells causing incresing on cell number on S fase, blocking the cycle cell progression. Thus F1.0 presented cytostatic and no cytotoxic action under this cell lineage. These results suggest that F1.0 from H. musciformis have antioxidant potential which is a great effect for a compound used as food and in food industry which could be an alternative to food industry to prevent quality decay of lipid containing food due to lipid peroxidation. These polysaccharides prevent the lipid peroxidation once the fraction in study exhibited strong inhibitory action of this process. Furthermore that F1.0 present strong antithrombotic action promoting the stimulation of antithrombotic HS synthesis by endothelial cells, being important for thrombosis preventing, by its inhibitory action under reactive oxygen species (ROS) in some in vitro methods, being involved in promotion of hypercoagulability state.

Caracterização estrutural e avaliação das atividades farmacológicas da fucana B extraída da alga Dictyota menstrualis

Seaweeds are a major source of biologically active compounds . In the extracellular matrix of these organisms are sulfated polysaccharides that functions as structural components preventing it against dehydration. The fraction 0.9 (FucB) rich in sulfated fucans obtained from brown seaweed Dictyota menstrualis was chemical characterized and evaluated for pharmacological activity by testing anticoagulant activity, stimulatory action on the synthesis of an antithrombotic heparan sulfate, antioxidant activity and its effects in cell proliferation. The main components were FucB carbohydrates (49.80 ± 0.10 %) and sulfate (42.30 ± 0.015 %), with phenolic compounds ( 3.86 ± 0.016 %) and low protein contamination ( 0.58 ± 0.001 % ) . FucB showed polydisperse profile and analysis of signals in the infrared at 1262, 1074 and 930 cm -1 and 840 assigned to S = O bonds sulfate esters , CO bond presence of 3,6- anhydrogalactose , β -D- galactose non- sulfated sulfate and the axial position of fucose C4 , respectively. FucB exhibited moderate anticoagulant activity , the polysaccharides prolonged time (aPTT ) 200 ug ( > 90s ) partial thromboplastin FucB no effect on prothrombin time (PT), which corresponds to the extrinsic pathway of coagulation was observed. This stimulation promoted fraction of about 3.6 times the synthesis of heparan sulfate (HS) by endothelial cells of the rabbit aorta ( RAEC ) in culture compared with cells not treated with FucB . This has also been shown to compete for the binding site with heparin. The rich fraction sulfated fucans exhibited strong antioxidant activity assays on total antioxidant (109.7 and 89.5 % compared with BHT and ascorbic acid standards ) , reducing power ( 71 % compared to ascorbic acid ) and ferric chelation ( 71 , comparing with 5 % ascorbic acid). The fraction of algae showed cytostatic activity on the RAEC cells revealed that the increase of the synthesis of heparan sulfate is not related to proliferation. FucB showed antiproliferative action on cell lines modified as Hela and Hep G2 by MTT assay . These results suggest that FucB Dictyota menstrualis have anticoagulant , antithrombotic , antioxidant potential as well as a possible antitumor action, promoting the stimulation of the synthesis of antithrombotic HS by endothelial cells and is useful in the prevention of thrombosis, also due to its inhibitory action on species reactive oxygen ( ROS ) in some in vitro systems , being involved in promoting a hypercoagulable state

Aproveitamento da fibra do epicarpo do coco babaçu em compósito com matriz epóxi: estudo do efeito do tratamento da fibra

Nowadays the environmental issues are increasingly highlighted since the future of humanity is dependent on the actions taken by man. Major efforts are being expended in pursuit of knowledge and alternatives to promote sustainable development without compromising the environment. In recent years there has been a marked growth in the development of reinforced composite fiber plants, as an alternative for economic and ecological effects, especially in the substitution of synthetic materials such as reinforcement material in composites. In this current study the chemical- physical or (thermophysics )characteristics of the babassu coconut fiber, derived from the epicarp of the fruit (Orbignyda Phalerata), which the main constituents of the fiber: Klason lignin, insoluble, cellulose, holocellulose, hemicellulose and the content of ash and moisture will be determined. A study was conducted about the superficial modification of the fibers of the epicarp babassu coconut under the influence of chemical treatment by alkalinization, in an aqueous solution of NaOH to 2.5% (m/v) and to 5.0% to improve the compatibility matrix / reinforcement composite with epoxy matrix. The results of the changes occurred in staple fibers through the use of the techniques of thermogravimetric analyses (TG) and differential scanning calorimetry (DSC). The results found on thermal analysis on samples of fiber without chemical treatment (alkalinities), and on fiber samples treated by alkalinization show that the proposed chemical treatment increases the thermal stability of the fibers and provides a growth of the surface of area fibers, parameters that enhance adhesion fiber / composite. The findings were evaluated and compared with published results from other vegetable fibers, showing that the use of babassu coconut fibers has technical and economic potential for its use as reinforcement in composites

Adição de nanopartículas de Ti em matriz de Fe através da deposição por magnetron sputtering

Microalloyed steels constitute a specific class of steel with low amount of carbon and microalloying elements such as Vanadium (V), Niobium (Nb) and Titanium (Ti). The development and application of microalloyed steels and steels in general are limited to the handling of powders with particles of submicron or nanometer dimensions. Therefore, this work presents an alternative in order to construction of microalloyed steels utilizing the deposition by magnetron sputtering technique as a microalloying element addiction in which Ti nanoparticles are dispersed in an iron matrix. The advantage of that technique in relation to the conventional metallurgical processes is the possibility of uniformly disperse the microalloying elements in the iron matrix. It was carried out deposition of Ti onto Fe powder in high CH4, H2, Ar plasma atmosphere, with two deposition times. After the deposition, the iron powder with nanoparticles of Ti dispersed distributed, were compacted and sintered at 1120 ° C in resistive furnace. Characterization techniques utilized in the samples of powder before and after deposition of Ti were Granulometry, Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (DRX). In the case of sintered samples, it was carried out characterization by SEM and Vickers Microhardness assays. The results show which the deposition technique by magnetron sputtering is practicable in the dispersion of particles in iron matrix. The EDX microanalysis detected higher percentages of Ti when the deposition were carried out with the inert gas and when the deposition process was carried out with reactive gas. The presence of titanium in iron matrix was also evidenced by the results of X-ray diffraction peaks that showed shifts in the network matrix. Given these results it can be said that the technique of magnetron sputtering deposition is feasible in the dispersion of nanoparticles of iron matrix in Ti.

Tratamentos de fibras de carnaúba [copernicia prunífera (miller) h. e. moore] para o desenvolvimento de compósito biodegradável com matriz de polihidroxibutirato

The use of raw materials from renewable sources for production of materials has been the subject of several studies and researches, because of its potential to substitute petrochemical-based materials. The addition of natural fibers to polymers represents an alternative in the partial or total replacement of glass fibers in composites. In this work, carnauba leaf fibers were used in the production of biodegradable composites with polyhydroxybutyrate (PHB) matrix. To improve the interfacial properties fiber / matrix were studied four chemical treatments to the fibers..The effect of the different chemical treatments on the morphological, physical, chemical and mechanical properties of the fibers and composites were investigated by scanning electron microscopy (SEM), infrared spectroscopy, X-ray diffraction, tensile and flexural tests, dynamic mechanical analysis (DMA), thermogravimetry (TGA) and diferential scanning calorimetry (DSC). The results of tensile tests indicated an increase in tensile strength of the composites after the chemical treatment of the fibers, with best results for the hydrogen peroxide treated fibers, even though the tensile strength of fibers was slightly reduced. This suggests a better interaction fiber/matrix which was also observed by SEM fractographs. The glass transition temperature (Tg) was reduced for all composites compared to the pure polymer which can be attributed to the absorption of solvents, moisture and other low molecular weight molecules by the fibers

Comportamento magnético de compósitos de matriz polimérica com adição de ferritas

Polymer matrix composites offer advantages for many applications due their combination of properties, which includes low density, high specific strength and modulus of elasticity and corrosion resistance. However, the application of non-destructive techniques using magnetic sensors for the evaluation these materials is not possible since the materials are non-magnetizable. Ferrites are materials with excellent magnetic properties, chemical stability and corrosion resistance. Due to these properties, these materials are promising for the development of polymer composites with magnetic properties. In this work, glass fiber / epoxy circular plates were produced with 10 wt% of cobalt or barium ferrite particles. The cobalt ferrite was synthesized by the Pechini method. The commercial barium ferrite was subjected to a milling process to study the effect of particle size on the magnetic properties of the material. The characterization of the ferrites was carried out by x-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM) and vibrating sample magnetometry (VSM). Circular notches of 1, 5 and 10 mm diameter were introduced in the composite plates using a drill bit for the non-destructive evaluation by the technique of magnetic flux leakage (MFL). The results indicated that the magnetic signals measured in plates with barium ferrite without milling and cobalt ferrite showed good correlation with the presence of notches. The milling process for 12 h and 20 h did not contribute to improve the identification of smaller size notches (1 mm). However, the smaller particle size produced smoother magnetic curves, with fewer discontinuities and improved signal-to-noise ratio. In summary, the results suggest that the proposed approach has great potential for the detection of damage in polymer composites structures

Comportamento da adição do carbeto de nióbio (nBC) na matriz metálica do aço ferrítico 15kH2mfa

The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar

Efeito da adição de grafite expandido por microondas nas propriedades térmicas, elétricas e mecânicas de nanocompósitos de matriz epóxi

Epoxy based nanocomposites with 1 wt % and 3 wt % of nanographite were processed by high shear mixing. The nanographite was obtained by chemical (acid intercalation), thermal (microwave expansion) and mechanical (ultrasonic exfoliation) treatments. The mechanical, electrical and thermal behavior of the nanocomposites was determined and evaluated as a function of the percentage of reinforcement. According to the experimental results, the electrical conductivity of epoxy was not altered by the addition of nanographite in the contents evaluated. However, based on the mechanical tests, nanocomposites with addition of 1 wt.% and 3 wt.% of nanographite showed increase in tensile strength of 16,62 % and 3,20 %, respectively, compared to the neat polymer. The smaller increase in mechanical strength of the nanocomposite with 3 wt.% of nanographite was related to the formation of agglomerates. The addition of 1 wt.% and 3 wt.% of nanographite also resulted in a decrease of 6,25 % and 17,60 %, respectively, in the relative density of the material. Thus, the specific strength of the nanocomposites was approximately 33,33 % greater when compared to the neat polymer. The addition of 1 wt.% and 3 wt.% of nanographite in the material increased the mean values of thermal conductivity in 28,33 % and 132,62 %, respectively, combined with a reduction of 26,11 % and 49,80 % in volumetric thermal capacity, respectively. In summary, it has been determined that an addition of nanographite of the order of 1 wt.% and 3 wt.% produced notable elevations in specific strength and thermal conductivity of epoxy