Acurácia dos índices antropométricos de obesidade central na determinação de síndrome metabólica e fatores de risco cardiovascular em mulheres com síndrome dos ovários policísticos

A síndrome dos ovários policísticos (SOP) é a desordem endócrina mais comum em mulheres com idade reprodutiva. Seu diagnóstico é firmado através do consenso de Rotterdam na presença de dois dos seguintes critérios: anovulação crônica, sinais clínicos e/ou bioquímicos de hiperandrogenismo e presença de micropolicistos nos ovários. Na SOP, além das características específicas da síndrome é comum a presença de marcadores de risco cardiovascular aumentado como dislipidemia, hipertensão arterial, resistência à insulina e obesidade central Objetivos: Analisar a acurácia diagnóstica da circunferência da cintura (CC), relação cintura-estatura (RCEst), razão cintura-quadril (RCQ) e índice de conicidade (Índice C) para detecção de fatores de risco cardiovascular (FRCV) e síndrome metabólica (SM) em mulheres com síndrome dos ovários policísticos (SOP). Metodologia: Foi realizado estudo transversal envolvendo 108 mulheres na faixa etária de 20-34 anos, com diagnóstico de SOP de acordo com o consenso de Rotterdam. Foram considerados parâmetros clínicos, antropométricos e bioquímicos de avaliação do risco cardiovascular. A análise dos dados foi desenvolvida em duas etapas, conforme descrito a seguir. Fase 1: análise da acurácia dos pontos de corte previamente determinados na literatura nacional para CC, RCEst, RCQ e Índice C, para predição de FRCV; Fase 2: determinação de pontos de corte dos índices antropométricos supracitados, específicos para mulheres com SOP, para discriminação de SM, através da análise da curva ROC (Receiver Operating Characteristic). Resultados: Com base nos achados da fase 1 do estudo, a RCEst foi o marcador que apresentou correlações positivas significativas com o xi maior número de FRCV (pressão arterial, triglicerídeos e glicemia após teste oral de tolerância à glicose), além de correlação negativa com HDL-colesterol. Os demais marcadores antropométricos se correlacionaram positivamente com pressão arterial, enquanto CC e RCQ apresentaram correlação positiva também com triglicerídeos. Todos os indicadores antropométricos apresentaram taxas de sensibilidade superiores a 60%, com destaque para a RCEst que apresentou sensibilidade superior a 70%. Na fase 2 da pesquisa observamos que a CC, RCEst e RCQ apresentaram desempenho semelhante na predição de SM, sendo superiores ao Índice C. Os valores de ponto de corte dos índices antropométricos para discriminar SM foram: CC = 95 cm; RCEst = 0,59; RCQ = 0,88; e Índice C = 1,25. Utilizando esses pontos de corte as taxas de sensibilidade e especificidade da CC e RCEst foram superiores às observadas para RCQ e Índice C. Conclusões: Nossos dados enfatizam a importância da avaliação antropométrica no rastreamento do risco cardiovascular em mulheres com SOP, destacando-se a relevância da RCEst na predição de FRCV clássicos e a necessidade de considerar pontos de corte específicos para mulheres com SOP para discriminação de SM

Zinco Sérico e parâmetros farmacocinéticos na determinação do estado corporal de zinco em crianças

O zinco é um micronutriente fundamental para as funções vitais de qualquer organismo vivo e sua deficiência em humanos pode causar alterações na expressão gênica, crescimento e desenvolvimento infantil, e proteção antioxidante. Devido à sua importância, as concentrações corporais de zinco são estritamente controladas por processos homeostáticos complexos. Este controle reflete no fato da deficiência grave de zinco ser detectada apenas após privação crônica. Embora se estime que a deficiência leve seja comum, os métodos existentes para avaliação individual do estado corporal de zinco são limitados e pouco eficazes. O objetivo deste trabalho foi avaliar o zinco sérico basal e os parâmetros farmacocinéticos na determinação do estado corporal de zinco em crianças, estabelecendo relação entre esses índices. O estudo foi aprovado pelo Comitê de Ética em pesquisa do Hospital Universitário Onofre Lopes (CEP-HUOL) e 129 crianças, eutróficas e aparentemente saudáveis, entre 6 e 9 anos de idade, foram avaliadas antes e após a suplementação oral de zinco (5 mg Zn/dia) durante 3 meses. No início e fim do período houve a administração venosa de zinco (0,06537 mg de Zn/kg de peso) em 40 destas crianças para avaliação dos parâmetros farmacocinéticos por meio de três diferentes fórmulas de clearance de zinco. Os limites do CI (95%) para o zinco sérico basal variaram entre 0,94 1,00 e 0,91 0,98 μg/mL em meninas e meninos, respectivamente. Em relação aos parâmetros farmacocinéticos, a fórmula específica para um compartimento apresentou correlação positiva com o zinco sérico após a suplementação e foi efetiva em detectar mudanças no estado corporal de zinco

Emulsões de óleo de copaíba: determinação do equilíbrio hidrófilo-lipófilo crítico (EHLC), propriedades e estabilidade físico-químicas

Durante as últimas décadas, as indústrias farmacêuticas têm despertado grande interesse em óleos vegetais e vários extratos de planta por causa da sua baixa toxicidade e alta biodegrabilidade. O óleo de copaíba (Cop) é usado in natura na medicina popular como anti-inflamatório e antimicrobiano para tratar várias doenças, tais como inflamação da garganta, úlceras e infecções urinárias e pulmonares. Emulsões são sistemas dispersos termodinamicamente instáveis que consistem em dispersões de gotículas microscópicas em outro líquido imiscível. O objetivo deste trabalho foi preparar diferentes emulsões de Cop, determinar o EHL crítico deste óleo e avaliar a sua estabilidade, além de realizar estudos comparativos entre diferentes métodos de construção de diagramas de fases. As emulsões foram preparadas pelo método de inversão de fases variando as proporções de EHL de 4,7 a 16,7. A estabilidade foi determinada por vários métodos e os diagramas de fases foram produzidos pelo método de titulação usando diferentes procedimentos de agitação. As emulsões a base de Cop com EHL entre 12,7 e 15,7 foram as mais estáveis. As emulsões apresentaram boa estabilidade em curto e longo prazo, aspecto leitoso e baixos valores de índice de cremagem. Diferentes sistemas coloidais foram produzidos a partir dos diagramas de fases dependendo do processo de agitação. Baseado nesses métodos, o valor determinado de EHL do Cop foi 14,8, as emulsões permaneceram estáveis por mais de um ano e estes resultados indicam que o estudo das emulsões de Cop pode ser um promissor veículo de liberação tópica de fármacos e ativos cosméticos

Determinação dos fatores neuroepidemiológicos das crises convulsivas em recém nascidos internados em unidades de terapia intensiva

O objetivo do nosso projeto foi determinar as características dos recém nascidos com crises convulsivas internados em unidades de terapia intensiva. Foi realizada uma pesquisa multicêntrica, observacional, prospectiva, cuja população alvo foi os recém nascidos com crises convulsivas internados em unidades de terapia intensiva, envolvendo equipe multidisciplinar constituída por neurologista infantil, neonatologistas, intensivistas pediátricos, enfermeiros, técnicos de enfermagem e fisioterapêutas. As crises foram definidas pelo critério clínico, com classificação de Volpe. Variáveis relacionadas à gestação, ao parto, características dos recém nascidos, aspectos das crises convulsivas e mortalidade foram analisadas. Estatística: descritiva (freqüências, medidas de tendência central e dispersão) e análise (teste de probabilidade, teste de risco e de acurácia). Comparamos as crises clínicas entre os recém nascidos de termo e pretermo e observamos diferenças com significância estatística na idade de início das crises, mais tardia nos prematuros, na etiologia predominante: hemorragia peri-intraventricular no prematuro e encefalopatia hipóxico-isquêmica no termo e tipo clínico de crise, clônica no pretermo e sutil no termo. Os testes de acurácia utilizados para determinar se o tipo clínico de crise convulsiva é predictor da etiologia da mesma não revelaram resultados positivos. Quanto às características associadas à mortalidade de prematuros com crise convulsiva, observamos associação entre ventilação mecânica e pneumonia com a mortalidade. Existem diferenças clínicas quando comparamos os recém nascidos pretermo e de termo com crises convulsivas, confirmando dados da literatura

Determinação dos intervalos de referência para lipídios, lipoproteínas e apolipoproteínas no estado do Rio Grande do Norte

The lipid profile is a group of lab tests that include triglycerides, total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C) and low-density lipoprotein cholesterol (LDL-C). However, serum non-HDL-C, Apo A-I and Apo B levels, as well as the lipids ratios (TC/HDL-C, LDL-C/HDL-C and Apo B/Apo A-I), have been described as better predictors of cardiovascular diseases. Reference intervals are tools often used to help the evaluation of the people s health state. These days, Brazilian studies still use the reference intervals of lipids and lipoproteins from other countries, ignoring differences between the populations. Therefore, this study aimed to establish reference intervals for lipids, lipoproteins and apolipoproteins in adults of Rio Grande do Norte/Brazil. Healthy individuals (96 men and 283 women) between 18 and 59years old formed the reference sample group. The samples were collected after fasting 12 to 14 hours. Information on lifestyle and dietary habits of the participants were obtained through questionnaire. The serum glucose level and renal and liver activity were evaluated by laboratory testing. The results of lipid profile were analyzed according to sex, age and mesoregion of Rio Grande do Norte, with significance level of 5% (p < 0,05). The lower and upper reference limits were identified by the 2.5 percentile and 97.5 percentile, respectively, and assurance intervals of 90% was calculated for each of these limits. Among the determinants of lipid profile analyzed, only a few significant differences were observed according to sex, but in terms of age, the groups of smaller and older ages were most likely different. When evaluated by region, the means of West region shown the most significant variations. Not many studies were useful to compare the reference intervals determined in this study. Thus, it becomes necessary to carry out similar studies in other regions of Brazil and of the world given the clinical importance of reference intervals

Determinação de parâmetros de qualidade para formas farmacêuticas homeopáticas

All medicine, whether allopathic or homeopathic, must go through strict quality control, which must ratify their characteristics throughout the period of validity. During the time of preparation and storage, solutions of the drugs are in permanent contact with packaging materials that can release undesirable substances to the solution. Several factors may influence the release of packing materials, and factorial design (FD) is a useful tool for analyzing the phenomenon. The aim of this study was the determination of quality parameters for Homeopathic solid (globules) and liquid (drops) dosage forms. It was carried out analysis in homeopathic globules for weight variation, mechanical strength, and moisture content uniformity. For liquid preparations, standard solutions were prepared from natural rubber bulbs, which were subjected to exhaustive extraction with two ethanol solutions (30 and 70%) in the ultrasonic bath for 20 minutes at 25°C and 50°C in three successive cycles. Studies of transfer have been made within five days, by spectrophotometric analysis in the UV region at 312 nm with λmáx and 323 nm for samples in 70% ethanol and 30% respectively. PH values were analyzed. We also conducted two FD studies, where the first, the three-level variables were solvent (chloroform, ethanol and nhexane), sample mass (30, 60 and 90mg), particle size (large disk, small disk and powder sample). In the second study, the solvent level variables were different ethanolic degrees (EtOH 30%, 70% and pure). The percentage of lending in the solutions was 5.5%, 12.4%, 24.2% and 41% of the total estimated in the reference solution. The values of rate constants of transfer were determined in the order of 0.0134 days-1 and 0.0232 days-1 in absorbance values, the solutions in ethanol at 30% and 70% respectively. These results suggest that the speed of transfer of materials from rubber is affected both by the nature of the vehicle as by the temperature

Desenvolvimento e validação de método analítico para determinação de teor de ácido gálico e catequina no fitoterápico sanativo® por cromatografia líquida de alta eficiência

The herbal medicine Sanativo® is produced by the Pernambucano Laboratory since 1888 with indications of healing and hemostasis. It is composed of a fluid extract about Piptadenia colubrina, Schinus terebinthifolius, Cereus peruvianus and Physalis angulata. Among the plants in their composition, S. terebinthifolius and P. colubrina have in common phenolic compounds which are assigned most of its pharmacological effects. The tannins, gallic acid and catechin were selected as markers for quality control. The aim of this study was the development and validation of analytical method by HPLC/UV/DAD for the separation and simultaneous quantification of gallic acid (GAC) and catechin (CTQ) in Sanativo®. The chromatographic system was to stationary phase, C-18 RP column, 4,6 x 150 mm (5 mm) under a temperature of 35 ° C, detection at 270 and 210 nm. The mobile phase consisted of 0.05% trifluoroacetic acid and methanol in the proportions 88:12 (v/v), a flow rate of 1 ml/min. The analytical method presented a retention factor of 0.30 and 1.36, tail factor of 1.8 and 1.63 for gallic acid and catechin, respectively, resolution of 18.2, and theoretical plates above 2000. The method validation parameters met the requirements of Resolution n º 899 of May 29, 2003, ANVISA. The correlation coefficient of linear regression analysis for GAC and CTQ from the standard solution was 0.9958 and 0.9973 and when performed from the Sanativo® 0.9973 and 0.9936, the matrix does not interfere in the range 70 to 110 %. The limits of detection and quantification for GAC and CQT were 3.25 and 0.863, and 9.57 and 2.55 mg/mL, respectively. The markers, GAC and CQT, showed repetibility (coefficient of variation of 0.94 % and 2.36 %) and satisfactory recovery (100.02 ± 1.11 % and 101.32 ± 1.36 %). The method has been characterized selective and robust quantification of GAC and CTQ in the Sanativo® and was considered validated

Otimização evalidação de métodos analíticos para a determinação simultânea de tuberculostáticos (4-FDC) por CLAE/DAD e CLUE/ DAD

Tuberculosis is a serious disease, but curable in practically 100% of new cases, since complied the principles of modern chemotherapy. Isoniazid (ISN), Rifampicin (RIF), Pyrazinamide (PYR) and Chloride Ethambutol (ETA) are considered first line drugs in the treatment of tuberculosis, by combining the highest level of efficiency with acceptable degree of toxicity. Concerning USP 33 - NF28 (2010) the chromatography analysis to 3 of 4 drugs (ISN, PYR and RIF) last in average 15 minutes and 10 minutes more to obtain the 4th drug (ETA) using a column and mobile phase mixture different, becoming its industrial application unfavorable. Thus, many studies have being carried out to minimize this problem. An alternative would use the UFLC, which is based with the same principles of HPLC, however it uses stationary phases with particles smaller than 2 μm. Therefore, this study goals to develop and validate new analytical methods to determine simultaneously the drugs by HPLC/DAD and UFLC/DAD. For this, a analytical screening was carried out, which verified that is necessary a gradient of mobile phase system A (acetate buffer:methanol 94:6 v/v) and B (acetate buffer:acetonitrile 55:45 v/v). Furthermore, to the development and optimization of the method in HPLC and UFLC, with achievement of the values of system suitability into the criteria limits required for both techniques, the validations have began. Standard solutions and tablets test solutions were prepared and injected into HPLC and UFLC, containing 0.008 mg/mL ISN, 0.043 mg/mL PYR, 0.030 mg.mL-1 ETA and 0.016 mg/mL RIF. The validation of analytical methods for HPLC and UFLC was carried out with the determination of specificity/selectivity, analytical curve, linearity, precision, limits of detection and quantification, accuracy and robustness. The methods were adequate for determination of 4 drugs separately without interfered with the others. Precise, due to the fact of the methods demonstrated since with the days variation, besides the repeatability, the values were into the level required by the regular agency. Linear (R> 0,99), once the methods were capable to demonstrate results directly proportional to the concentration of the analyte sample, within of specified range. Accurate, once the methods were capable to present values of variation coefficient and recovery percentage into the required limits (98 to 102%). The methods showed LOD and LOQ very low showing the high sensitivity of the methods for the four drugs. The robustness of the methods were evaluate, facing the temperature and flow changes, where they showed robustness just with the preview conditions established of temperature and flow, abrupt changes may influence with the results of methods

Desenvolvimento e validação de método analítico para determinação de WE010, WE014 e WE017

The synthetic guanylhydrazones WE010 (3,5-di-tert-butil-4-hidroxibenzaldehyde-guanylhydrazone), WE014 (4-bifenilcarboxialdehydeguanylhydrazone) and WE017 (3,4-diclorobenzaldehydeguanylhydrazone) showed high cytotoxic activity in terms of percentage inhibition of cancer cells growth. However, further progress in the development of these drug candidates requires precise and convenient methods for their qualitative and quantitative analyses. The aim of this study was to develop and validate High Performance Liquid Chromatography with diode-array detection (HPLC-DAD) and Ultra Fast Liquid Chromatography with diode-array detection (UFLC-DAD) methods suitable for as simultaneous as isolated determination of studied guanylhydrazones, based on the optimization of chromatographic parameters and obtaining reduced detection times. The chromatographic analyses of analytes by HPLC were performed on C18 ACE analytical column (150 mm x 4.6 mm), with a particle size of 5.0 μm. Among all the conditions assayed, the best results of separation were obtained with a mixture of methanol:water (60:40, v/v) as the mobile phase at a flow rate 1.5mL/min and pH of 3.5 adjusted at acetic acid. The UFLC method was developed by experimetal desing techniques in order to find optimal chromatographic analytical conditions, which were achieved on XR-ODS analytical column (50 mm x 3.0 mm), with a particle size of 2,2 μm, maintained at 25 ºC. The mobile phase was consisted of methanol:water (65:35, v/v) with 0.1% triethylamine (TEA) and pH of 3.5 adjusted at acetic acid, at a flow rate 0.5 mL/min. The procedure were validated following evaluating parameters such as specificity, linearity, limits of detection (LD) and quantification (LQ), precision, accuracy and robustness, giving results within the acceptable range. Although the UFLC method shows better sensitivity (lower values of LD and LQ), robustness (lower rates of relative standard deviation) and minimize spending time and solvent, both developed methods were adequately applied to the analysis of guanylhydrazones molecules, may be used in routine of quality control laboratories. Keywords: guanylhydrazones, HPLC/DAD, UFLC/DAD, validation of analitical method

Determinação dos parâmetros do controlador preditivo generalizado com função de pesos variante no tempo através de algoritmos genéticos

The predictive control technique has gotten, on the last years, greater number of adepts in reason of the easiness of adjustment of its parameters, of the exceeding of its concepts for multi-input/multi-output (MIMO) systems, of nonlinear models of processes could be linearised around a operating point, so can clearly be used in the controller, and mainly, as being the only methodology that can take into consideration, during the project of the controller, the limitations of the control signals and output of the process. The time varying weighting generalized predictive control (TGPC), studied in this work, is one more an alternative to the several existing predictive controls, characterizing itself as an modification of the generalized predictive control (GPC), where it is used a reference model, calculated in accordance with parameters of project previously established by the designer, and the application of a new function criterion, that when minimized offers the best parameters to the controller. It is used technique of the genetic algorithms to minimize of the function criterion proposed and searches to demonstrate the robustness of the TGPC through the application of performance, stability and robustness criterions. To compare achieves results of the TGPC controller, the GCP and proportional, integral and derivative (PID) controllers are used, where whole the techniques applied to stable, unstable and of non-minimum phase plants. The simulated examples become fulfilled with the use of MATLAB tool. It is verified that, the alterations implemented in TGPC, allow the evidence of the efficiency of this algorithm

Determinação de Chaveamento para Recomposição do Serviço em Redes de Distribuição de Energia Elétrica em Média Tensão Através de Métodos Baseado em Parâmetros de Sensibilidade

The reconfiguration of a distribution network is a change in its topology, aiming to provide specific operation conditions of the network, by changing the status of its switches. It can be performed regardless of any system anomaly. The service restoration is a particular case of reconfiguration and should be performed whenever there is a network failure or whenever one or more sections of a feeder have been taken out of service for maintenance. In such cases, loads that are supplied through lines sections that are downstream of portions removed for maintenance may be supplied by the closing of switches to the others feeders. By classical methods of reconfiguration, several switches may be required beyond those used to perform the restoration service. This includes switching feeders in the same substation or for substations that do not have any direct connection to the faulted feeder. These operations can cause discomfort, losses and dissatisfaction among consumers, as well as a negative reputation for the energy company. The purpose of this thesis is to develop a heuristic for reconfiguration of a distribution network, upon the occurrence of a failure in this network, making the switching only for feeders directly involved in this specific failed segment, considering that the switching applied is related exclusively to the isolation of failed sections and bars, as well as to supply electricity to the islands generated by the condition, with significant reduction in the number of applications of load flows, due to the use of sensitivity parameters for determining voltages and currents estimated on bars and lines of the feeders directly involved with that failed segment. A comparison between this process and classical methods is performed for different test networks from the literature about networks reconfiguration

Um método para determinação da profundidade combinando visão estéreo e autocalibração para aplicação em robótica móvel

This work proposes a method to determine the depth of objects in a scene using a combination between stereo vision and self-calibration techniques. Determining the rel- ative distance between visualized objects and a robot, with a stereo head, it is possible to navigate in unknown environments. Stereo vision techniques supply a depth measure by the combination of two or more images from the same scene. To achieve a depth estimates of the in scene objects a reconstruction of this scene geometry is necessary. For such reconstruction the relationship between the three-dimensional world coordi- nates and the two-dimensional images coordinates is necessary. Through the achievement of the cameras intrinsic parameters it is possible to make this coordinates systems relationship. These parameters can be gotten through geometric camera calibration, which, generally is made by a correlation between image characteristics of a calibration pattern with know dimensions. The cameras self-calibration allows the achievement of their intrinsic parameters without using a known calibration pattern, being possible their calculation and alteration during the displacement of the robot in an unknown environment. In this work a self-calibration method based in the three-dimensional polar coordinates to represent image features is presented. This representation is determined by the relationship between images features and horizontal and vertical opening cameras angles. Using the polar coordinates it is possible to geometrically reconstruct the scene. Through the proposed techniques combination it is possible to calculate a scene objects depth estimate, allowing the robot navigation in an unknown environment

Sistema inteligente para determinação das direções de chegada de múltiplos sinais em arranjos de antenas

This dissertation presents a new proposal for the Direction of Arrival (DOA) detection problem for more than one signal inciding simultaneously on an antennas array with linear or planar geometry by using intelligent algorithms. The DOA estimator is developed by using techniques of Conventional Beam-forming (CBF), Blind Source Separation (BSS), and the neural estimator MRBF (Modular Structure of Radial Basis Functions). The developed MRBF estimator has its capacity extended due to the interaction with the BSS technique. The BSS makes an estimation of the steering vectors of the multiple plane waves that reach the array in the same frequency, that means, obtains to separate mixed signals without information a priori. The technique developed in this work makes possible to identify the multiple sources directions and to identify and to exclude interference sources

Estudo da estimativa da incerteza de medição para determinação do BS&W e da vazão aplicado no laboratório de avaliação de medição do petróleo

The considered work presents the procedure for evaluation of the uncertainty related to the calibration of flow measurers and to BS&W. It is about a new method of measurement purposed by the conceptual project of the laboratory LAMP, at Universidade Federal do Rio Grande do Norte, that intends to determine the conventional true value of the BS&W from the total height of the liquid column in the auditor tank, hydrostatic pressure exerted by the liquid column, local gravity, specific mass of the water and the specific mass of the oil, and, to determine the flow, from total height of liquid column and transfer time. The calibration uses a automatized system of monitoration and data acquisition of some necessary largnesses to determine of flow and BS&W, allowing a better trustworthiness of through measurements

Painéis-sanduíche com núcleo de EPS reciclado: metodologia de execução e determinação de propriedades termofísicas

New materials made from industrial wastes have been studied as an alternative to traditional fabrication processes in building and civil engineering. These materials are produced considering some issues like: cost, efficiency and reduction of nvironmental damage. Specifically in cases of materials destined to dwellings in low latitude regions, like Brazilian Northeast, efficiency is related to mechanical and thermal resistance. Thus, when thermal insulation and energetic efficiency are aimed, it s important to increase thermal resistance without depletion of mechanical properties. This research was conducted on a construction element made of two plates of cement mortar, interspersed with a plate of recycled expanded polystyrene (EPS). This component, widely known as sandwich-panel, is commonly manufactured with commercial EPS whose substitution was proposed in this study. For this purpose it was applied a detailed methodology that defines parameters to a rational batching of the elements that constitute the nucleus. Samples of recycled EPS were made in two different values of apparent specific mass (ρ = 65 kg/m³; ρ = 130 kg/m³) and submitted to the Quick-Line 30TM that is a thermophysical properties analyzer. Based on the results of thermal conductivity, thermal capacity and thermal diffusivity obtained, it was possible to assure that recycled EPS has thermal insulation characteristics that qualify it to replace commercial EPS in building and civil engineering industry