Desenvolvimento e avaliação tribológica de emulsão O/A a partir de óleo vegetal epoxidado para aplicação em fluídos de corte

The cutting fluids are lubricants used in machining processes, because they present many benefits for different processes. They have many functions, such as lubrication, cooling, improvement in surface finishing, besides they decreases the tool wear and protect it against corrosion. Therefore due to new environment laws and demand to green products, new cutting fluids must be development. These shall be biodegradable, non-toxic, safety for environment and operator healthy. Thus, vegetable oils are a good option to solve this problem, replacing the mineral oils. In this context, this work aimed to develop an emulsion cutting fluid from epoxidized vegetable oil, promoting better lubrication and cooling in machining processes, besides being environment friendly. The methodology was divided in five steps: first one was the biolubricant synthesis by epoxidation reaction. Following this, the biolubricant was characterized in terms of density, acidity, iodo index, oxirane index, viscosity, thermal stability and chemical composition. The third step was to develop an emulsion O/A with different oil concentration (10, 20 and 25%) and surfactant concentration (1, 2.5 and 5%). Also, emulsion stability was studied. The emulsion tribological performance were carried out in HFRR (High Frequency Reciprocating Rig), it consists in ball-disc contact. Results showed that the vegetable based lubricant may be synthesized by epoxidationreaction, the spectra showed that there was 100% conversion of the epoxy rings unsaturations. In regard the tribological assessment is observed that the percentage of oil present in the emulsion directly influenced the film formation and coefficient of friction for higher concentrations the film formation process is slow and unstable, and the coefficient of friction. The high concentrations of surfactants have not improved the emulsions tribological performance. The best performance in friction reduction was observed to emulsion with 10% of oil and 5% of surfactant, its average wear scar was 202 μm.

Competição espacial no mercado de revenda da gasolina: uma análise nas principais cidades do Rio Grande do Norte

This study aims to analyze the relationship between average price with the concentration in the markets (municipalities) in the state of Rio Grande do Norte, is using a little tool applied to the Brazilian market is the spatial econometric model. A data base contains all the stations of the major cities in the state of Rio Grande do Norte and includes 142 observations on stations was used. Theoretical models predict the relationship between the number of competitors in a market and the average price; these theoretical models include: the monopolistic competition of Perloff and Salop (1985), and the search-theoretic, of Carlson and McAfee (1983) and Varian (1980). The empirical results showed that a higher density within a geographic area is associated with a lower average price, thus converging with the monopolistic competition model and with the search-theoretic of Carlson and McAfee (1983). The parameters varied little with the inclusion / exclusion of control variables, showing the robustness of them.

Análise do impacto do sombreamento vegetal no conforto termo-luminoso em edificações no clima quente e úmido

Este trabalho visa analisar o potencial do sombreamento vegetal no edifício para promover conforto térmico, luminoso e eficiência energética, a partir de simulações computacionais nos softwares DesignBuilder e Daysim. Foram simuladas diferentes combinações de fator de céu visível (FCV), transparência da copa vegetal e percentual de abertura da fachada (PAF) para edificação residencial térrea em Nata/RN, a fim de quantificar os impactos e propor recomendações projetuais. Os modelos foram analisados por meio do método de conforto adaptativo indicado pela ASHRAE Standard 55 (ASHRAE, 2010), classificação do nível de eficiência energética do Regulamento Técnico da Qualidade para o Nível de Eficiência Energética de Edificações Residenciais (RTQ-R), resultados de Daylight autonomy (DA) e uniformidade da luz natural para as exigências lumínicas de 100-300-500 lux. Os resultados demonstram grande potencial para integração da vegetação na edificação, principalmente para os fatores de céu médio e grande, e falta de coerência do RTQ-R para classificar as edificações da Zona bioclimática 08 pelo método de simulação.

Análise do impacto do sombreamento vegetal no conforto termo-luminoso em edificações no clima quente e úmido

Este trabalho visa analisar o potencial do sombreamento vegetal no edifício para promover conforto térmico, luminoso e eficiência energética, a partir de simulações computacionais nos softwares DesignBuilder e Daysim. Foram simuladas diferentes combinações de fator de céu visível (FCV), transparência da copa vegetal e percentual de abertura da fachada (PAF) para edificação residencial térrea em Nata/RN, a fim de quantificar os impactos e propor recomendações projetuais. Os modelos foram analisados por meio do método de conforto adaptativo indicado pela ASHRAE Standard 55 (ASHRAE, 2010), classificação do nível de eficiência energética do Regulamento Técnico da Qualidade para o Nível de Eficiência Energética de Edificações Residenciais (RTQ-R), resultados de Daylight autonomy (DA) e uniformidade da luz natural para as exigências lumínicas de 100-300-500 lux. Os resultados demonstram grande potencial para integração da vegetação na edificação, principalmente para os fatores de céu médio e grande, e falta de coerência do RTQ-R para classificar as edificações da Zona bioclimática 08 pelo método de simulação.

Preferência e competição alimentar em um grupo de Sapajus flavius em fragmento de Mata Atlântica em Caaporã – Paraíba – Brasil

Feeding is the primary selective pressure in all forms of animals. Nutritional ecological models predict consequences of preferred and non-preferred food consumption on behavioural, physiological and morphological adaptations. At same time, socioecological models infer socio-organizarion patterns based on feeding competition faced by animals. A list of preferred foods, and inferences regarding the intensity of feeding competition and its behavioural consequences are information of much importance for management of populations in fragments. In this work we observed the feeding behavior and spatial positioning of a group of more than 100 blond capuchin monkeys (Sapajus flavius) that inhabit a fragment of Atlantic forest, surrounded by sugarcane plantation. We compared the consumption of different food items with their monthly availability in the area to define the preferred and fallback food items. We recorded the vocalizations of aggression and the inter-individual distance (area of Minimum Convex Polygon/n individuals) to infer the type of food competition experienced by animals. In the year studied the fruit feeding time correlated with top consumed fruit productivity, indicating preference for fruits. Our data indicate that the species Elaeis sp., Cecropia palmata, Inga spp. and Simarouba amara are the preferred food items in the diet. Available all year round and uniformly distributed, sugarcane was a regular item in the diet and its was characterized as a staple fallback food for this group. Although fruits are preferential food items, direct competition rate did not correlate to fruit productivity in the area, maintaining the high rates throughout the year (2.45 events/ hour). The inter-individual distance index positively correlated with rain fall indicating scramble food competition. The number of neighbours of females carrying infants was smaller when fruit productivity is low, indicating that females carrying infants are suffering increased indirect competition. Our data indicates that blond capuchins in this fragment make use of sugar cane as a staple fallback food, which evidence the importance of sugar cane landscape for the survival of this critically endangered capuchin species in fragmented habitats in Northeast Brazil. A preliminary list of preferred and important foods is offered, and can assist in the choice of trees for reforestation, better fragments to be preserved and areas of release and translocation of animals. We did not observe an increase of contest competition while using preferred foods, but when using staple FBF. This may be due the altered environment, which results in high competition food throughout the year. Both the food preference as the social and behavioral consequences of high food competition experienced by animals in this fragment must be accompanied over the years to ensure the survival of this population.

Preferência e competição alimentar em um grupo de Sapajus flavius em fragmento de Mata Atlântica em Caaporã – Paraíba – Brasil

Feeding is the primary selective pressure in all forms of animals. Nutritional ecological models predict consequences of preferred and non-preferred food consumption on behavioural, physiological and morphological adaptations. At same time, socioecological models infer socio-organizarion patterns based on feeding competition faced by animals. A list of preferred foods, and inferences regarding the intensity of feeding competition and its behavioural consequences are information of much importance for management of populations in fragments. In this work we observed the feeding behavior and spatial positioning of a group of more than 100 blond capuchin monkeys (Sapajus flavius) that inhabit a fragment of Atlantic forest, surrounded by sugarcane plantation. We compared the consumption of different food items with their monthly availability in the area to define the preferred and fallback food items. We recorded the vocalizations of aggression and the inter-individual distance (area of Minimum Convex Polygon/n individuals) to infer the type of food competition experienced by animals. In the year studied the fruit feeding time correlated with top consumed fruit productivity, indicating preference for fruits. Our data indicate that the species Elaeis sp., Cecropia palmata, Inga spp. and Simarouba amara are the preferred food items in the diet. Available all year round and uniformly distributed, sugarcane was a regular item in the diet and its was characterized as a staple fallback food for this group. Although fruits are preferential food items, direct competition rate did not correlate to fruit productivity in the area, maintaining the high rates throughout the year (2.45 events/ hour). The inter-individual distance index positively correlated with rain fall indicating scramble food competition. The number of neighbours of females carrying infants was smaller when fruit productivity is low, indicating that females carrying infants are suffering increased indirect competition. Our data indicates that blond capuchins in this fragment make use of sugar cane as a staple fallback food, which evidence the importance of sugar cane landscape for the survival of this critically endangered capuchin species in fragmented habitats in Northeast Brazil. A preliminary list of preferred and important foods is offered, and can assist in the choice of trees for reforestation, better fragments to be preserved and areas of release and translocation of animals. We did not observe an increase of contest competition while using preferred foods, but when using staple FBF. This may be due the altered environment, which results in high competition food throughout the year. Both the food preference as the social and behavioral consequences of high food competition experienced by animals in this fragment must be accompanied over the years to ensure the survival of this population.

Obtenção e caracterização de um compósito de matriz polimérica com carga de resíduos vegetal proveniente do sabugo de milho

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Obtenção e caracterização de um compósito de matriz polimérica com carga de resíduos vegetal proveniente do sabugo de milho

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Áreas importantes para a conservação do último grande herbívoro da caatinga potiguar: o veado-catingueiro (Mazama gouazoubira)

Cervídeo Mazama gouazoubira é a espécie de veado que possui maior distribuição dentre as espécies sul americanas. Aspectos da vegetação, predação, competição, caça e perda de habitat são fatores importantes para compreender a distribuição espacial de herbívoros na paisagem. Dessa forma, considerando a falta de estudos de mamíferos de médio e grande porte na Caatinga, objetivamos compreender quais os fatores ambientais e antrópicos que influenciam a ocupação do veado-catingueiro (M. gouazoubira) na região semiárida do estado do Rio Grande do Norte, Brasil. O estudo foi realizado em 10 áreas amostrais e utilizamos armadilhas fotográficas para amostragem e modelos de ocupação foram construídos representando nossas hipóteses biológicas. Os modelos foram ranqueados através dos valores obtidos do AIC. As variáveis cobertura vegetal de caatinga e densidade da vegetação mostraram maior efeito, já a caatinga arbórea mostrou um efeito menor, sugerindo que a espécie é altamente dependente da vegetação para ocorrer, possuindo menor dependência de caatinga arbórea. Esperamos que nossos resultados possam ser utilizados como suporte para planos de manejo e criação de novas unidades de conservação no estado.

Obtenção e caracterização de um compósito de matriz polimérica com carga de bucha vegetal luffa cylindrica

Composite materials arise from the need for lighter materials and with bigger mechanical and thermal resistance. The difficulties of discard, recycling or reuse are currently environmental concerns and, therefore, they are study object of much researches. In this perspective the feasibility of using loofahs (Luffa Cylindrica) for obtainment of a polymeric matrix composite was studied. Six formulations, with 4, 5 and 6 treated layers and untreated, were tested. The loofahs were treated in boiling water to remove lignins, waxes and impurities present in the fibers. After that, they were dried in a direct exposure solar dryer. For the characterization of the composite, thermal (thermal conductivity, thermal capacity, thermal diffusivity and thermal resistivity), mechanical (tensile and bending resistance) and physicochemical (SEM, XRD, density, absorption and degradation) properties were determined. The proposed composite has as advantage the low fiber density, which is around 0.66 g/cm³ (almost half of the polyester resin matrix), resulting in an average composite density of around 1.17g/cm³, 6.0 % lower in relation to the matrix. The treatment carried out in the loofahs increased the mechanical strength of the composite and decreased the humidity absorption. The composite showed lower mechanical behavior than the matrix for all the formulations. The composite also demonstrated itself to be feasible for thermal applications, with a value of thermal conductivity of less than 0.159 W/m.K, ranking it as a good thermal insulator. For all formulations/settings a low adherence between fibers and matrix occurred, with the presence of cracks, showing the fragility due to low impregnation of the fiber by the matrix. This composite can be used to manufacture structures that do not require significant mechanical strength, such as solar prototypes, as ovens and stoves.

Obtenção e caracterização de um compósito de matriz polimérica com carga de bucha vegetal luffa cylindrica

Composite materials arise from the need for lighter materials and with bigger mechanical and thermal resistance. The difficulties of discard, recycling or reuse are currently environmental concerns and, therefore, they are study object of much researches. In this perspective the feasibility of using loofahs (Luffa Cylindrica) for obtainment of a polymeric matrix composite was studied. Six formulations, with 4, 5 and 6 treated layers and untreated, were tested. The loofahs were treated in boiling water to remove lignins, waxes and impurities present in the fibers. After that, they were dried in a direct exposure solar dryer. For the characterization of the composite, thermal (thermal conductivity, thermal capacity, thermal diffusivity and thermal resistivity), mechanical (tensile and bending resistance) and physicochemical (SEM, XRD, density, absorption and degradation) properties were determined. The proposed composite has as advantage the low fiber density, which is around 0.66 g/cm³ (almost half of the polyester resin matrix), resulting in an average composite density of around 1.17g/cm³, 6.0 % lower in relation to the matrix. The treatment carried out in the loofahs increased the mechanical strength of the composite and decreased the humidity absorption. The composite showed lower mechanical behavior than the matrix for all the formulations. The composite also demonstrated itself to be feasible for thermal applications, with a value of thermal conductivity of less than 0.159 W/m.K, ranking it as a good thermal insulator. For all formulations/settings a low adherence between fibers and matrix occurred, with the presence of cracks, showing the fragility due to low impregnation of the fiber by the matrix. This composite can be used to manufacture structures that do not require significant mechanical strength, such as solar prototypes, as ovens and stoves.

Cooperação e competição entre políticas no Brasil: os custos da governabilidade no presidencialismo de coalizão

Public policies have been studied in the various fields of humanities and social sciences, from different theoretical and technical aspects. However, there is still a lack of studies that incorporate the dimension that encompasses the political action and its interference in such actions, also recognizing the importance of the institutional setting of the Brazilian presidential model in implementing these policies. This fragmented and multiparty system has led to power heterogeneous sets of political parties. Thus, the ministerial offices, more than assisting the President´s government project, manage particularized agendas, which are party biased and have the influence of interest groups in hegemonic themes addressed by government agencies. When these agendas operate in sectoral and specialized policies, the friction level is apparently low. However, when this occurs in intersectoral actions, such as in regional development, there is evidence of strong signs of competition among government agencies, which in theory, should operate in an integrated manner. Although this is not a specific feature of Luiz Inacio Lula da Silva´s government- the period to be studied- there was similar behavior in Fernando Henrique Cardoso´s presidency, one realizes that the expansion of coalition on behalf of governance is increasingly interfering in the outcome of intersectoral public policies, due to these multiple arguments in action. In order to understand these processes, this study focused on the Sustainable and Integrated Development Programme for Differentiated Meso-Regions (PROMESO), part of the National Policy for Regional Development (NPRD). The program provides interface with various government agencies and their public policies in a clear intersectoral design. The research sought to identify and analyze the relationships between government agencies and their programs with interest groups, whether political parties or other segments of civil society, highlighting the logic of favoritism, which poses in second place the integration of actions in the intersectoral policies. Therefore, besides the theoretical debate that incorporates several categories of political science, public administration, public policy, geography and economics, the study focused on secondary sources, using different government agencies databases in order to raise information. It was observed that the interference of partisan politics has been disastrous for some public policies. Thus, the research confirms that cooperative character is fragile within government agencies, often limited to official documents, and that there is indeed, a striking feature of competition, especially when it comes to transversalized policies

Avaliação da espécie vegetal Croton cajucara Benth como inibidor de biocorrosão em aço carbono Aisi 1020

Actually in the oil industry biotechnological approaches represent a challenge. In that, attention to metal structures affected by electrochemical corrosive processes, as well as by the interference of microorganisms (biocorrosion) which affect the kinetics of the environment / metal interface. Regarding to economical and environmental impacts reduction let to the use of natural products as an alternative to toxic synthetic inhibitors. This study aims the employment of green chemistry by evaluating the stem bark extracts (EHC, hydroalcoholic extract) and leaves (ECF, chloroform extract) of plant species Croton cajucara Benth as a corrosion inhibitor. In addition the effectiveness of corrosion inhibition of bioactive trans-clerodane dehydrocrotonin (DCTN) isolated from the stem bark of this Croton was also evaluated. For this purpose, carbon steel AISI 1020 was immersed in saline media (3,5 % NaCl) in the presence and absence of a microorganism recovered from a pipeline oil sample. Corrosion inhibition efficiency and its mechanisms were investigated by linear sweep voltammetry and electrochemical impedance. Culture-dependent and molecular biology techniques were used to characterize and identify bacterial species present in oil samples. The tested natural products EHC, ECF and DCTN (DMSO as solvent) in abiotic environment presented respectively, corrosion inhibition efficiencies of 57.6% (500 ppm), 86.1% (500 ppm) and 54.5% (62.5 ppm). Adsorption phenomena showed that EHC best fit Frumkin isotherm and ECF to Temkin isotherm. EHC extract (250 ppm) dissolved in a polar microemulsion system (MES-EHC) showed significant maximum inhibition efficiency (93.8%) fitting Langmuir isotherm. In the presence of the isolated Pseudomonas sp, EHC and ECF were able to form eco-compatible organic films with anti-corrosive properties