Papel da localização da carga em determinação dos parâmetros do canal iônico

To aureus α-HL channel, we used the cysteine-scanning mutagenesis technique. Twenty-four mutants were produced from the substitution of a single aminoacid of the primary structure of the α-HL pro this yzed after the incorporation of a mutant channel in planar lipid bilayer membranes. The modified proteins were studied in the absence and presence of watersoluble specific sulphydryl-specific reagents, in order to introduce a strong positive or negative harge at positions of substitution. The introduction of a negative charge in the stem region onverted the selectivity of the channel from weak anionic to more cationic. However, the troduction of a positive charge increased its selectivity to the anion. The degree of these alterations was inversely dependent on the channel radius at the position of the introduced harge (selectivity). As to the asymmetry of the conductance-voltage, the influence of the harge was more complex. The introduction of the negative charge in the stem region (the trans art of the pore) provoked a decrease. The intensity of these alterations depended on the radius, and on the type of free charge at the pore entrance. These results suggest that the free charge at surrounds the pore wall is responsible for the cation-anion selectivity of the channel. The istribution of the charges between the entrances is crucial for determining the asymmetry of e conductance-voltage curves. We hope that these results serve as a model for studies with other nanometric channels, in biological or planar lipid bilayer membranes or in iotechnological applications

Avaliação in vitro da atividade antimicrobiana de diferentes soluções a base de hidróxido de cálcio

The science of Dentistry wishes obtains the ideal solution for the dental plaque chemical control. This research evaluated antimicrobial action capacity in calcium hydroxide and tergentol various solutions starting for the CHD 20, a root canals irrigating solution with a reason of 80% calcium hydroxide saturated solution and 20% tergentol detergent with the aim of evaluate this drug mouth rinse indication with prevention or combat objective for dental caries and periodontal diseases. Antibiogram disks and biofilm tests were accomplished for the microorganisms: Streptococcus mutans, Streptococcus sanguis, Streptococcus sobrinus and Lactobacillus casei. Different reasons of detergent for the calcium hydroxide saturated solution, tergentol and distillated water solution, 0,12% clorhexydine digluconate solution was positive control and distillated water was negative control. The results showed better performance of clorhexydine in relation to calcium hydroxide directing to not accept this (CHD20) as mouth rinse solution

Financiamento e gasto público em saúde: o caso do Rio Grande do Norte

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Cooperativismo sob a ótica da economia solidária e popular : algumas evidências no meio rural potiguar

Las experiencias colectivas como canales de acceso a mejores condiciones de vida, engendradas por los sectores populares y, especialmente, por las populaciones rurales, nos motivaron a la realización de esta investigación. Teniendo como unidad de análisis una cooperativa constituida por agricultores y agricultoras familiares, investigada por medio de un estudio de caso y como base teórica las concepciones de economía solidaria y popular, nuestra cuestión central fue comprender ¿cuales las prácticas adoptadas que han posibilitado su éxito? Para ello, partimos de la hipótesis de que el éxito de esas organizaciones depende de la aplicación de los principios cooperativistas, cuales sean: adhesión libre y voluntaria, democracia, participación, intercooperación, educación e información, preocupación con el entorno, autonomía e independencia; y de sus relaciones externas con el Estado y otras instituciones de apoyo. Para cumplir nuestro propósito, fueron seleccionados también algunos indicadores, una amuestra aleatoria de la población elegida y los representantes de las instituciones involucradas con la cooperativa. Siendo una investigación de carácter más cualitativa, pero usando dados cuantitativos, fueron utilizados para la coleta de los datos encuestas semi-estructuradas, cuestionarios con preguntas abiertas y cerradas, observaciones directas, registros fotográficos y análisis documentales. Los principales resultados encontrados indican que la hipótesis fue confirmada, o sea, el éxito de la cooperativa estudiada tuvo vinculación directa con la aplicación de los principios cooperativistas, con el acceso a los recursos públicos disponibles y con los apoyos de otras instituciones, generando beneficios socioeconómicos para los cooperados y externalidades positivas para el desenvolvimiento del entorno

O renascimento do parto e da (reinvenção da) emancipação social na blogosfera brasileira: contra o desperdício das experiências

The birth models of care are discussed, in the light of classical and contemporary social science theoretical background, emphasizing the humanistic model. The double spiral of the sociology of absences and the sociology of emergences is detailed, being based, on one hand, on the translation of experiences of knowledge, and, on the other, on the translation of experiences of information and communication, by revealing the movement articulated by Brazilian women on blogs that defend and bring into light initiatives aiming to recover natural and humanized birth. A cartography of the thematic ideas in birth literature is produced, resulting in the elaboration of a synthetic map on obstetric models of care in contemporaneity, pointing out the consequences of the obstetric model that has become hegemonic in contemporary societies, and comparing that model to others that work more efficaciously to mothers and babies. A symbolic cartography of the activism for humanizing birth on the Brazilian blogosphere is configured by the elaboration of an analytical map synthetizing the main mottos defended by the movement: Normal humanized birth; Against obstetrical violence; and Planned home birth. The superposition of the obstetric models of care s map and the rebirth of birth s analytical map indicates it is necessary to reinforce three main measures in order to make a paradigmatic turn in contemporary birth models of care possible: pave the way for the humanistic care of assistance in normal birth, by defending and highlighting practices and professionals that act in compliance with evidence based medicine, respecting the physiology of birth; denaturalize obstetric violence, by showing how routine procedures and interventions can be means of aggression, jeopardizing the autonomy, the protagonism and the respect towards women; and motivate initiatives of planned home birth, the best place for the occurrence of holistic experiences of birth. It is concluded that Internet tools have allowed a pioneer mobilization in respecting women s reproductive rights in Brazil and that the potential of the crowd s biopower that resides on the blogosphere can turn blogs into a hegemonic alternative way to reach more democratic forms of social organization. In that condition of being virtually hegemonic in contesting the established power, these blogs can be understood, therefore, as potentially great contra-hegemonic channels for the rebirth of birth and for the reinvention of social emancipation, as their author s articulate and organize themselves to strive against the waste of experience, trying to create reciprocal intelligibility amongst different experiences of world

Retratos da dignidade: negros do riacho: identidade educação fotografia (2005-2007)

Portraits de la Dignité: Noirs du Riacho (2005-2006) analyse le Projet Dignité, comme un produit publicitaire du gouverne du Rio Grande do Norte, à travers de trois voie: l éducation; l identité; la propagande publicitaire. Notre regard a été dirigé vers les images écrites, parlés et photografiées pour meilleur comprendre comme la communauté des Noirs du Riacho, a été incorporer a polítique d égalité de races proposé par les gouvernes Municipal, de l État, et Fédéral, tout em transformant la communauté en produit publicitaire du gouverne. Entre une partie et l outre on a enregistrés des questions sur l identité, plus particulierment la (des)constrution identitaire tout en s appuyant dans le rôle de la langage publicitaire, que em utilisand les richeses de ses techniques, montre le Riacho et le peuple dans la exposition etno-photogaphique Portraits de la Dignité. Ainsi, c est important comprendre la divulgation du Projet Dignité, appuyer dans la propragande de l image des personnages du Riacho divulguées dans la presse locale. Cette problematique, nos conduit a controverser des questions três anciennes par rapports aux discriminations contre les négres, ainsi comme la façon que le gouvernement en la période analysé, s engage en la problematique des communautés restantes de quilombolas dans l État du Rio Grande do Norte. Au choisir la communauté du Riacho pour développer sa politique d action affirmative l État place le Riacho comme laboratoire sociale , en cette contexte nous cherchons à travers des analyses des documents officiels, thèses, recherches bibliografiques et de champs, bien comme de matériel journalistique et publicitaire, révéler les messages véhiculés dans la presse locale sur des questions proposés par cette étude. Pour développer l étude nous appuyons metodologicament en la recherche qualitative, sans perdre de vue l analyse critique des contenus, vu que les sujets en étude ne doive pas être analyser basé en un unique point de vue. Ainsi, nous pensons ne pas fermer la question, mas ouvrir l outres pour permettre meilleur débattre la liason chaque jour plus fort entre la publicité e l action gouvernamentale, en ce qui est relatif aux usages de l image photografique

Avaliação de concreto com adição de fibras de PET submetido a altas temperaturas

The concrete for centuries constituted an essential structural element in the construction industry due to its relative ease of forming, before the weather durability, low cost, its lower maintenance compared to other materials such as steel. However, when the concrete is exposed to high temperatures tends to lose its mechanical characteristics, and may even result in loss of section, which undermines the stability and mechanical strength of structural elements. The pathologies resulting from exposure to elevated temperatures ranging from cracks, pops up chipping explosives (spalling). Recently, the technology of concrete is closely related to the study of its microstructure. The use of fibers added to concrete has been revealed as a solution to increase the mechanical strength of the concrete, it acts directly on the distribution of efforts to act in the play within the microstructure. In this work we used recycled PET fibers embedded in concrete with 15x2mm fck = 30MPa, water/cement ratio of 0.46, in works made for verification of mechanical strength of this mixture submitted to high temperature. The specimens of concrete with addition of PET fibers were tested after exposure to temperatures: ambient (30ºC), 100°C, 200°C, 300°C, 400°C, 600°C and 900°C. It was found that the concrete loses significant strength when exposed to temperatures above 300°C, however the use of fiber PET may delay the risk of collapse of structures for the formation of a network of channels that facilitate the escape of vapor 'water, reducing the pore pressure inside the structural element

Gestão da cadeia de fornecimento :um estudo em empresas de construção certificadas com a ISO 9000

The aim of this present research is to investigate about aplication of the supply chain management in Civil Construction, through perception of brasilian building companies directors. Research purpose includes potential benefits and main dificults analysis in supply chain management, beyond to identify decision criterions for suppliers and sales chain (commission agent and real state agency) choice and reduction, to facilility management in companies. The methodology used in this work considers the application of a questionnaire with scales of the type Likert being constituted of variables that compose the aspects of evaluation and of behaviors, beyond questions to identify the market profile of the respondents. For analysis statistics is used the descriptive, clusters and variance, ANOVA, analysis last two to verify the connections between variables. The results show more perception as for long terms contracts with suppliers for purchase of materials and services being decisive for companies nowadays (40%) than as for exclusive contracts with commission agents (30%). There is a positive appraisal about viability of hipotetic situations showed, but more caution as for disposition to apply them too. Another results aim for biggers dificults in management of chain links formed by commission agents and real state agencies, than chain links formed by anothers suppliers of materials and services. The companies for study were chosen among to those with ISO 9000 certificate until november 2001, considering that these companies have the best management systems, probably

Análise pelo Supply Chain Management da cadeia produtiva da castanha de caju no Rio Grande do Norte

This work presents the cashew nuts chain in the State of Rio Grande do Norte between 1960 and 2009. The main purpose of this research was to find the reason of the low productivity of the cashew nut in this state, identifying in the cashew's chain production the struggling points which were limiting the commerce of this product through the distribution network. Therefore, the Supply Chain Management was used as a logistic analysis methodology, focusing on relationships management between the nodes of this chain, from the producer until the final customer. Many problems were found: first, the precarious production conditions of the small producer don't lead to reach the demanded productivity by the market. The distance, the lack of communication of the small producers among themselves and an archaic way of dealing with their businesses, may be an explanatory reason for this problem, considering that those factors are the main elements which contribute for the weakening of the small producer placed in the productive chain. Another spotted point was that the business-oriented relationship between the producer and the local trader does not allow the small producer's economical development, which interferes in any technological investment to reach a good quality production that fulfills the market demand. And also, the fact that there is a tendency of the final costumer to require lower prices day-byday, forcing a pressure on the nodes transferring to the other and successively until arriving at the producer who inevitably is suffering the biggest impacts from this mentioned pressure.

Controle vetorial de velocidade de uma máquina de indução sem mancais trifásica com bobinado dividido utilizando estimação neural de fluxo

This work describes the study and the implementation of the vector speed control for a three-phase Bearingless induction machine with divided winding of 4 poles and 1,1 kW using the neural rotor flux estimation. The vector speed control operates together with the radial positioning controllers and with the winding currents controllers of the stator phases. For the radial positioning, the forces controlled by the internal machine magnetic fields are used. For the radial forces optimization , a special rotor winding with independent circuits which allows a low rotational torque influence was used. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed and radial positioning controllers to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The DSP resources used by the system are: the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Controle vetorial de velocidade de um motor de indução trifásico com estimação neural de fluxo

This work describes the study and the implementation of the speed control for a three-phase induction motor of 1,1 kW and 4 poles using the neural rotor flux estimation. The vector speed control operates together with the winding currents controller of the stator phasis. The neural flux estimation applied to the vector speed controls has the objective of compensating the parameter dependences of the conventional estimators in relation to the parameter machine s variations due to the temperature increases or due to the rotor magnetic saturation. The implemented control system allows a direct comparison between the respective responses of the speed controls to the machine oriented by the neural rotor flux estimator in relation to the conventional flux estimator. All the system control is executed by a program developed in the ANSI C language. The main DSP recources used by the system are, respectively, the Analog/Digital channels converters, the PWM outputs and the parallel and RS-232 serial interfaces, which are responsible, respectively, by the DSP programming and the data capture through the supervisory system

Fibra de crital fotônico: fundamentação e aplicações

The main purpose of this dissertation, consists of the study and analysis of the PBG (Photonic Band Gap )..tecnology incorporated in optical fiber structures. So, we'l1 present a complete PBG structure theory, and folowing this, we'l1 present also a chapter for convencional optical fiber, due to the need to construct the base theory of them, and latter a more complete work about photonic crystal fiber. Finaly, we'l1 show the results of the signals , dispersion, and obtained curves under the right dimensions according to the required signals, for convencional optical and photonic crystal fiber. Knowing that PBG crystals with low losses act as perfect mirrors for forbidden frequences and knowing that the persence of structures of PBG as substrates, brings some desirable characteristics such as spontaneous emition supression and superficial waves. We' 11 show according to these characteristics its applications in telecomunication. Therefore, the enphasis of this work is to show that the optical fibers are the only practible thing to integrate the enormous quantity of data and video at intemet' s market, developing, manipulating, changing, and multiplexing the optical fibers chanels in an area where we expect that the photonic crystals has an important hole, since the photonic crystals can be projected and made to avoid losses in the bands of certain wavelength which permits the increase in efficiency ofthe optical components projected with crystals. A sequence of this work would be the utilisation of the PBG structures in the new system of optical network without fiber developed by Bell laboratories of the lucent tecnology, last year using light rays for transmiting information through the air. The new system of optical networks without fiber will permit sending the data of 15 cd-rooms in less then one second, what represents 65 times more information than those transmitted through the actual radio frequences

Modulação quantizada para sistemas com codificação wavelet sujeitos ao desvanecimento rayleigh

Wavelet coding is an efficient technique to overcome the multipath fading effects, which are characterized by fluctuations in the intensity of the transmitted signals over wireless channels. Since the wavelet symbols are non-equiprobable, modulation schemes play a significant role in the overall performance of wavelet systems. Thus the development of an efficient design method is crucial to obtain modulation schemes suitable for wavelet systems, principally when these systems employ wavelet encoding matrixes of great dimensions. In this work, it is proposed a design methodology to obtain sub-optimum modulation schemes for wavelet systems over Rayleigh fading channels. In this context, novels signal constellations and quantization schemes are obtained via genetic algorithm and mathematical tools. Numerical results obtained from simulations show that the wavelet-coded systems derived here have very good performance characteristics over fading channels

Desenvolvimento de Uma Órtese Ativa Para os Membros Inferiores Com Sistema Eletrônico Embarcado

This work presents the development of a prototype of an intelligent active orthosis for lower limbs whit an electronic embedded system. The proposed orthosis is an orthopedical device with the main objective of providing walking capacity to people with partial or total loss of lower limbs movements. In order to design the kinematics, dynamics and the mechanical characteristics of the prototype, the biomechanics of the human body was analized. The orthosis was projected to reproduce some of the movements of the human gait as walking in straight forward, sit down, get up, arise and go down steps. The joints of the orthosis are controlled by DC motors equipped with mechanical reductions, whose purpose is to reduce rotational speed and increase the torque, thus generating smooth movements. The electronic embedded system is composed of two motor controller boards with two channels that communicate with a embedded PC, position sensors and limit switches. The gait movements of the orthosis will be controlled by high level commands from a human-machine interface. The embedded electronic system interprets the high level commands, generates the angular references for the joints of the orthosis, controls and drives the actuators in order to execute the desired movements of the user

Avaliação dos modelos de predição de propagação para telefonia móvel celular na cidade do Natal

The development of wireless telecommunication in the last years has been great. It has been taking academics to conceive new ideas and techniques. Their aims are to increase the capacity and the quality of the system s services. Cells that are smaller every time, frequencies that are every time higher and environments that get more and more complex, all those facts deserve more accurate models the propagation prediction techniques are inserted in this context and results with a merger of error that is compatible with the next generations of communication systems. The objective of this Work is to present results of a propagation measurement campaign, aiming at pointing the characteristics of the mobile systems covering in the city of Natal (state of Rio Grande do Norte, Brazil). A mobile laboratory was set up, using the infra-structure available and frequently used by ANATEL. The measures were taken in three different areas: one characterized by high buildings, high relief, presence of trees and towers of different highs. These areas covered the city s central zone, a suburban / rural zone and a section of coast surrounded by sand dunes. It is important to highlight that the analysis was made taking into consideration the actual reality of cellular systems with covering ranges by reduced cells, with the intent of causing greater re-use of frequencies and greater capacity of telephone traffic. The predominance of telephone traffic by cell in the city of Natal occurs within a range inferior to 3 (three) km from the Radio-Base Station. The frequency band used was 800 MHz, corresponding to the control channels of the respective sites, which adopt the FSK modulation technique. This Dissertation starts by presenting a general vision of the models used for predicting propagation. Then, there is a description of the methodology used in the measuring, which were done using the same channels of control of the cellular system. The results obtained were compared with many existing prediction models, and some adaptations were developed by using regression techniques trying to obtain the most optimized solutions. Furthermore, according to regulations from the old Brazilian Holding Telebrás, a minimum covering of 90% of a determined previously area, in 90% of the time, must be obeyed when implanting cellular systems. For such value to be reached, considerations and studies involving the specific environment that is being covered are important. The objective of this work is contribute to this aspect