Oxidação úmida de fenóis com catalisadores de ferro suportado em argilominerais em reator de leito de lama (slurry)

The wet oxidation of organic compounds with CO2 and H2O has been demonstrated to be an efficient technique for effluent treatment. This work focuses on the synthesis, characterization and catalytic performance of Fe-MnO2/CeO2, K-MnO2/CeO2/ palygorskite and Fe/ palygorskite toward the wet oxidative degradation of phenol. The experiments were conducted in a sludge bed reactor with controlled temperature, pressure and stirring speed and sampling of the liquid phase. Experiments were performed on the following operating conditions: temperature 130 ° C, pressure 20.4 atm, catalyst mass concentration of 5 g / L initial concentration of phenol and 0.5 g / L. The catalytic tests were performed in a slurry agitated reactor provided with temperature, pressure and agitation control and reactor liquid sampling. The influences of iron loaded on the support (0.3; 7 and 10%, m/m) and the initial pH of the reactant medium (3.1; 6.8; 8.7) were studied. The iron dispersion on the palygorskite, the phase purity and the elemental composition of the catalyst were evaluated by X-Ray Difraction (XRD), Scanning Electron Microscopy (SEM) and X-Ray Flourescence (XRF). The use of palygorskite as support to increase the surface area was confirmed by the B.E.T. surface results. The phenol degradation curves showed that the Fe3+ over palygorskite when compared with the other materials tested has the best performance toward the (Total Organic carbonic) TOC conversion. The decrease in alkalinity of the reaction medium also favors the conversion of TOC. The maximum conversion obtained from the TOC with the catalyst 3% Fe / palygorskite was around 95% for a reaction time of 60 minutes, while reducing the formation of acids, especially acetic acid. With products obtained from wet oxidation of phenol, hydroquinone, p-benzoquinone, catechol and oxalic acid, identified and quantified by High Performance Liquid Chromatography was possible to propose a reaction mechanism of the process where the phenol is transformed into the homogeneous and heterogeneous phase in the other by applying a kinetic model, Langmuir-Hinshelwood type, with evaluation of kinetic constants of different reactions involved.

Avaliação e modelagem da absorção de H2S do gás natural em coluna de leito estagnado

Natural gas, although basically composed by light hydrocarbons, also presents contaminant gases in its composition, such as CO2 (carbon dioxide) and H2S (hydrogen sulfide). The H2S, which commonly occurs in oil and gas exploration and production activities, causes damages in oil and natural gas pipelines. Consequently, the removal of hydrogen sulfide gas will result in an important reduction in operating costs. Also, it is essential to consider the better quality of the oil to be processed in the refinery, thus resulting in benefits in economic, environmental and social areas. All this facts demonstrate the need for the development and improvement in hydrogen sulfide scavengers. Currently, the oil industry uses several processes for hydrogen sulfide removal from natural gas. However, these processes produce amine derivatives which can cause damage in distillation towers, can cause clogging of pipelines by formation of insoluble precipitates, and also produce residues with great environmental impact. Therefore, it is of great importance the obtaining of a stable system, in inorganic or organic reaction media, able to remove hydrogen sulfide without formation of by-products that can affect the quality and cost of natural gas processing, transport, and distribution steps. Seeking the study, evaluation and modeling of mass transfer and kinetics of hydrogen removal, in this study it was used an absorption column packed with Raschig rings, where the natural gas, with H2S as contaminant, passed through an aqueous solution of inorganic compounds as stagnant liquid, being this contaminant gas absorbed by the liquid phase. This absorption column was coupled with a H2S detection system, with interface with a computer. The data and the model equations were solved by the least squares method, modified by Levemberg-Marquardt. In this study, in addition to the water, it were used the following solutions: sodium hydroxide, potassium permanganate, ferric chloride, copper sulfate, zinc chloride, potassium chromate, and manganese sulfate, all at low concentrations (»10 ppm). These solutions were used looking for the evaluation of the interference between absorption physical and chemical parameters, or even to get a better mass transfer coefficient, as in mixing reactors and absorption columns operating in counterflow. In this context, the evaluation of H2S removal arises as a valuable procedure for the treatment of natural gas and destination of process by-products. The study of the obtained absorption curves makes possible to determine the mass transfer predominant stage in the involved processes, the mass transfer volumetric coefficients, and the equilibrium concentrations. It was also performed a kinetic study. The obtained results showed that the H2S removal kinetics is greater for NaOH. Considering that the study was performed at low concentrations of chemical reagents, it was possible to check the effect of secondary reactions in the other chemicals, especially in the case of KMnO4, which shows that your by-product, MnO2, acts in H2S absorption process. In addition, CuSO4 and FeCl3 also demonstrated to have good efficiency in H2S removal

Expressão imuno-histoquímica metaloproteinase -1, -2 e -9 em ameloblastoma sólido e tumor odontogênico adematóide

Ameloblastoma and adenomatoid odontogenic tumor are odontogenic tumors arising from the odontogenic epithelium with distinct clinical behavior. In attempt to comprehend the interaction between the odontogenic tumor cells and the extracellular matrix, the present work evaluated and compared the immunohistochemical expression of the matrix metalloproteinases-1 (MMP-1), -2 (MMP-2) and -9 (MMP-9) in 20 cases of ameloblastoma and 10 adenomatoid odontogenic tumor. MMP-1 exhibited exuberant expression in the parenchyma and in the stroma of both studied tumors, while the MMP-2 showed varied expression with about of 80% and 60% of the neoplastic cells exhibiting positivity in the ameloblastoma and adenomatoid odontogenic tumor, respectively. With relation to the MMP-2 expression by the mesenchymal cells, it was observed that 65% of the ameloblastoma and 80% of the adenomatoid odontogenic tumor were positive. The immunoreactivity of MMP-9 was detected in all studied cases, although its expression had occurred predominantely in less than 50% of the parenchyma cells of the ameloblastoma, while in about of 60% of the adenomatoid odontogenic tumor more than 50% of cells were positive. The mesenchymal cells were positive to MMP-9 in 65% of the ameloblastoma and in 80% of the adenomatoid odontogenic tumor, respectively. Statistically significant difference was observed to the MMP-1 expression with relation to MMP-2 and MMP-9 in the ameloblastoma (p < 0.001). It was not possible to perform statistical analysis to the cases of adenomatoid odontogenic tumor, however there was a tendency toward a differential expression of the MMP-1 with relation to other studied MMPs. These results suggest that MMP-1, - 2 and -9 are implicated in the growth and progression of both tumors analyzed as well as the more pronounced participation of the stroma in the ameloblastoma could together to be related to the higher clinical aggressiveness

Estudo da angiogênese pelo CD105 e FvW no carcinoma epidermóide oral e sua relação com o estadiamento clínico do tumor

The purpose of this study was to assess the immunohistochemical expression of CD105 and FvW antibodies in the angiogenesis of oral epidermoid carcinoma (OEC), correlating it with the TNM clinical staging system, seeking a better understanding of its biological behavior and use as an indicator of prognosis.The sample consisted of 30 epidermoid carcinoma (EC) cases, 10 of the floor of the mouth, 10 of the retromolar region and 10 of the tongue, in addition to 10 cases of pyogenic granuloma, which made up the control group. The results showed that mean microvessel counts (MVC) were correspondingly higher in the pyogenic granuloma group (CD105 = 57.26 vessels and FvW = 39.64) than in the EC group (CD105 = 10.09 and FvW = 12.20) and that the differences were statistically significant between the groups for each of the angiogenic biomarkers (p = 0.002 for CD105 and p< 0.001 for FvW). CD105 had better positivity in the pyogenic granuloma group (mean = 57.26 vessels) and for EC, FvW had the highest expression (mean = 12.20 vessels). With respect to EC, the most affected age group was between 51 and 70 years (n = 14; 46.7%), with a representative MVC for both markers. No statistically significant difference was found between the sexes for any of the markers (p = 0.967 for CD105 and p = 0.744 for FvW). Mean CD105 levels were much higher in patients with stage T3 and T4 (17.13) and lower in those with stage N+ (6.36). Mean FvW levels were higher in the patients with stage T1 and T2 (12.23) and lower in patients with T3 and T4 (12.10), but without a statistically significant difference. In regard to anatomic location, a statistically significant difference was observed between FvW sites, with a statistically significant difference between floor of the mouth cases and those located in the retromolar region (p =0.013). Therefore, this study suggests that CD105 expression in OEC angiogenesis, in contrast to other types of malignant neoplasias, may not be correlated with prognosis and tumor aggressiveness, whereas FvW was a more effective antibody for staining this lesion

Avaliação imuno-histoquímica da BMP-2, BMP-4 e seus receptores (BMPRIA e BMPRII) em ameloblastomas e tumor odontogênico adenomatóide

BMPs are components superfamily ligands transformation growth fator-β (TGF-β) secreted into the extracellular environment, with mechanisms of intercellular communication through specific ligands and receptors in various target cells, being recognized for its influence in osteogenic induction, also play an important role in tissue homeostasis, cell proliferation, differentiation control , in addition to being present in the development of various malignancies. The aim of this study was to compare the immunohistochemical expression of BMP-2, BMP-4 and its receptors BMPRIA and BMPRII in cases of ameloblastoma and adenomatoid odontogenic tumor. The sample consisted of 20 cases of solid ameloblastoma (SA), 10 cases of ameloblastoma unicystic (UA) and 16 cases of adenomatoid odontogenic tumor (AOT). The expression of BMPs and their receptors was evaluated in the parenchyma and stroma of lesions, establishing the percentage of immunopositive cells (0 - negative; 1-1 % to 10 % of cells positive; 2 - 11% to 25% of positive cells; 3 - 26% to 50% of cells positive; 4 - 51% to 75 % of positive cells; 5 - more than 75% positive cells). Analysis of the expression of BMP-2 revealed no statistically significant differences in parenchymal (p = 0.925) and stromal component (p = 0.345) between the groups, as well as BMP-4 (p = 0.873 / p = 0.131). In the epithelial component, SA and AOT had a higher frequency of score 5. In turn, all cases of UA were classified as score 5. The analysis of the stromal component showed no statistically significant difference between groups with respect to median scores BMPRIA positivity (p = 0.768) and BMPRII (p = 0.779). In the epithelial component of SA and UA, no statistically significant correlations between imunoexpression proteins analyzed were observed. In turn, the group of AOT, statistically significant positive correlations between the scores of expression of all studied proteins were found. In the stromal component, statistically significant positive correlations were found only in the SA group in BMP -4 and BMPRII (r = 0.476; p = .034), in the UA in BMP-4 and BMPRIA (r = 0.709; p = 0.022). The results of this study suggest that the BMPs and their receptors are involved in the development process odontogenic tumors. BMP-4, in turn, besides being present in odontogenic tumors have the capacity to form mineralized material.

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C