Implementação da rotina de unfolding para determinação de distribuição de tamanho de grãos esféricos via distribuição de interceptos lineares e de área de seção

Na unfolding method of linear intercept distributions and secction área distribution was implemented for structures with spherical grains. Although the unfolding routine depends on the grain shape, structures with spheroidal grains can also be treated by this routine. Grains of non-spheroidal shape can be treated only as approximation. A software was developed with two parts. The first part calculates the probability matrix. The second part uses this matrix and minimizes the chi-square. The results are presented with any number of size classes as required. The probability matrix was determined by means of the linear intercept and section area distributions created by computer simulation. Using curve fittings the probability matrix for spheres of any sizes could be determined. Two kinds of tests were carried out to prove the efficiency of the Technique. The theoretical tests represent ideal cases. The software was able to exactly find the proposed grain size distribution. In the second test, a structure was simulated in computer and images of its slices were used to produce the corresponding linear intercept the section area distributions. These distributions were then unfolded. This test simulates better reality. The results show deviations from the real size distribution. This deviations are caused by statistic fluctuation. The unfolding of the linear intercept distribution works perfectly, but the unfolding of section area distribution does not work due to a failure in the chi-square minimization. The minimization method uses a matrix inversion routine. The matrix generated by this procedure cannot be inverted. Other minimization method must be used

Automação da drenagem no teste de produção convencional em tanque cilíndrico

This document aims to improve the quality of the production test in vertical tanks with free water drain pipes, through a device to control the draining system. This proposal consists of an interface detector close to the tank bottle and a control valve on the pipe-drain; they are attached to a remote supervisor system, which will be minimizing the human influence in the conclusion of the test result. And for more consciousness the work shows the importance of the wells production test in the attendance and diagnosis of the productive process, informing the large number of tests executed and problems of the procedure adopted in the field today. There are many possible sources of uncertainty in this kind of test as shown in the experiments realized in the field; the object prototype of this dissertation will be made in the field, based upon the definition of parameters and characteristics of the devices proposal. For a better definition of the draining process the action results of the assessment test are shown, especially changed some for the understand ing of the real process. It shows the proposal details and the configuration that will be used in the tank of Monte Alegre s field Production Station, explaining the interface detector kind and the control system. It is the base to a pilot project now in development, named as the new project classified in the status of the new technology and production improvement of PETROBRAS in Rio Grande do Norte and Ceará. This dissertation concludes that the automation of the conventional test with the draining system will bring benefits both economically as metrologically, because it reduces the uncertainty of the test procedures with free water draining, and also decreases the number of tests with problems

Ambiente para avaliação de controladores fuzzy aplicados ao método de elevação artificial por bombeio centrífugo submerso

From their early days, Electrical Submergible Pumping (ESP) units have excelled in lifting much greater liquid rates than most of the other types of artificial lift and developed by good performance in wells with high BSW, in onshore and offshore environments. For all artificial lift system, the lifetime and frequency of interventions are of paramount importance, given the high costs of rigs and equipment, plus the losses coming from a halt in production. In search of a better life of the system comes the need to work with the same efficiency and security within the limits of their equipment, this implies the need for periodic adjustments, monitoring and control. How is increasing the prospect of minimizing direct human actions, these adjustments should be made increasingly via automation. The automated system not only provides a longer life, but also greater control over the production of the well. The controller is the brain of most automation systems, it is inserted the logic and strategies in the work process in order to get you to work efficiently. So great is the importance of controlling for any automation system is expected that, with better understanding of ESP system and the development of research, many controllers will be proposed for this method of artificial lift. Once a controller is proposed, it must be tested and validated before they take it as efficient and functional. The use of a producing well or a test well could favor the completion of testing, but with the serious risk that flaws in the design of the controller were to cause damage to oil well equipment, many of them expensive. Given this reality, the main objective of the present work is to present an environment for evaluation of fuzzy controllers for wells equipped with ESP system, using a computer simulator representing a virtual oil well, a software design fuzzy controllers and a PLC. The use of the proposed environment will enable a reduction in time required for testing and adjustments to the controller and evaluated a rapid diagnosis of their efficiency and effectiveness. The control algorithms are implemented in both high-level language, through the controller design software, such as specific language for programming PLCs, Ladder Diagram language.

Avaliação do desenvolvimento neuropsicomotor em crianças na rede básica de saúde utilizando o teste de Denver II: identificação de fatores de risco materno

Alterations in the neuropsychomotor development of children are not rare and can manifest themselves with varying intensity at different stages of their development. In this context, maternal risk factors may contribute to the appearance of these alterations. A number of studies have reported that neuropsychomotor development diagnosis is not an easy task, especially in the basic public health network. Diagnosis requires effective, low-cost, and easy - to-apply procedures. The Denver Developmental Screening Test, first published in 1967, is currently used in several countries. It has been revised and renamed as the Denver II Test and meets the aforementioned criteria. Accordingly, the aim of this study was to apply the Denver II Test in order to verify the prevalence of suspected neuropsychomotor development delay in children between the ages of 0 and 12 months and correlate it with the following maternal risk factors: family income, schooling, age at pregnancy, drug use during pregnancy, gestational age, gestational problems, type of delivery and the desire to have children. For data collection, performed during the first 6 months of 2004, a clinical assessment was made of 398 children selected by pediatricians and the nursing team of each public health unit. Later, the parents or guardians were asked to complete a structured questionnaire to determine possible risk indicators of neuropsychomotor development delay. Finally the Denver II Developmental Screening Test (DDST) was applied. The data were analyzed together, using Statistical Package for Social Science (SPSS) software, version 6.1. The confidence interval was set at 95%. The Denver II Test yielded normal and questionable results. This suggests compromised neuropsychomotor development in the children examined and deserves further investigation. The correlation of the results with preestablished maternal risk variables (family income, mother s schooling, age at pregnancy, drug use during the pregnancy and gestational age) was strongly significant. The other maternal risk variables (gestational problems, type of delivery and desire to have children) were not significant. Using an adjusted logistic regression model, we obtained the estimate of the greater likelihood of a child having suspected neuropsychomotor development delay: a mother with _75 4 years of schooling, chronological age less than 20 years and a drug user during pregnancy. This study produced two manuscripts, one published in Acta Cirúrgica Brasileira , in which an analysis was performed of children with suspected neuropsychomotor development delay in the city of Natal, Brazil. The other paper (to be published) analyzed the magnitude of the independent variable maternal schooling associated to neuropsychomotor development delay, every 3 months during the first twelve months of life of the children selected.. The results of the present study reinforce the multifactorial characteristic of development and the cumulative effect of maternal risk factors, and show the need for a regional policy that promotes low-cost programs for the community, involving children at risk of neuropsychomotor development delay. Moreover, they suggest the need for better qualified health professionals in terms of monitoring child development. This was an inter- and multidisciplinary study with the integrated participation of doctors, nurses, nursing assistants and professionals from other areas, such as statisticians and information technology professionals, who met all the requirements of the Postgraduate Program in Health Sciences of the Federal University of Rio Grande do Norte

Elaboração e validade do teste de rastreio de doença da Alzheimer com provérbios (TRDAP) para indivíduos a partir de sessenta anos

A escassez de instrumentos para a avaliação e a triagem da doença de Alzheimer, (DA), notadamente denominados de rastreio, com características de padronização e validados para o Nordeste, motivou este Estudo. Visando à triagem de uma etapa mais leve da doença e encaminhamento precoce ao tratamento multidisciplinar foi elaborado o Teste de Rastreio da Doença de Alzheimer com Provérbios (TRDAP), a partir de um Jogo de Memória de Provérbios, construído como recurso terapêutico ocupacional. Está composto de três etapas conforme a função neuropsicológica avaliada, a A (memória de curto prazo), B (funções executivas e linguagem) e C (memória episódica), além do reconhecimento de provérbios. O Estudo foi realizado em uma amostra de conveniência, com 91 idosos (28 DA e 63 controles), a partir de 60 anos, com um ou mais anos de escolaridade. Foram controladas as variáveis, como doenças intercorrentes ou déficits sensoriais que pudessem comprometer o desempenho dos pacientes, nos testes. O protocolo constou de oito testes selecionados por especialistas: Miniexame do Estado Mental (para validade convergente), Escala de Depressão Geriátrica EDG (validade discriminante), Lista de Palavras, Fluência Verbal, Span de Dígitos, Figura Neuropsi, Teste do Relógio, Atividade de Vida Diária e Instrumental. Os resultados confirmaram a validade de construto convergente e discriminante, assim como a relação significativa (p<0,005) com todos os testes, exceto com o EDG. Quanto à validade concorrente, não houve discordância com o critério da avaliação médica observou-se consistência interna aceitável, conferindo confiabilidade no instrumento, o que não ocorreu com MEEM. Tais resultados permitem afirmar que o TRDAP possui características psicométricas, adequadas ao rastreio da fase leve da DA para população estudada

Análise da efetividade do transplante renal na qualidade de vida dos receptores no estado do Rio Grande do Norte

This study was developed with the aim of analyzing the effectiveness of renal transplantation on quality of life of kidney recipients in the Rio Grande do Norte State. This is a descriptive study with longitudinal design, panel type with quantitative approach to data analysis. The Quality of Life (QoL) of chronic disease kidney patients before and after kidney transplantation was assessed by the WHOQOL-bref, The population consisted of patients in pre and post-renal transplantation, the sample had 63 patients older than 18 years. The study was conducted after approval by the Research Ethics Committee of the Onofre Lopes University Hospital, Federal University of Rio Grande do Norte, No. CAAE 0008.0.294.000-10. Data collection was performed at a referral center for renal transplantation in Rio Grande do Norte, from May 2010 to May 2013. Data were analyzed using descriptive statistics and presented in tables and graphs. For statistical analyzes, Microsoft Excel XP and SPSS 15.0 software were used. The tests used were simple variance (ANOVA), t-test, Mann-Whitney and Wilcoxon test to compare means, and Spearman correlations. P values <0.05 were considered significant. The demographic data showed a predominance of people between 18 and 45 years (68.2%) with a mean age of 39.9 years (SD 12.2), male (63.5%), married (58.7%), with children (51.0%). Regarding the education level was observed that 49.2% of participants had completed primary school, and most did not engage in any work activity (90.4%) during the study period. Hemodialysis was the predominant renal replacement therapy (96.8%) and the average waiting time for execution of transplantation was 1.9 years (SD 1.9). Comparison of QoL before and after transplantation showed significant differences in all areas analyzed, demonstrating that kidney transplantation had a positive impact on QoL in chronic renal patients undergoing kidney transplantation. Sociodemographic factors did not influence the quality of life in this group of patients, indicating that transplantation was the main factor to explain the improvement in quality of life. Thus, the alternative hypothesis of the study was accept, that there is a significant difference in quality of life before and after kidney transplant. It is expected that the results of this study may contribute to the development of strategies to encourage organ donation and kidney transplantation process

Representações sociais sobre o acidente de trabalho em saúde

The aim of the present study was to identify the representational elements of workrelated accidents in the health field, as well as investigate their most frequent occurrences at a university hospital, seeking to understand the cognitive, affective and social elements subjacent to the work process involved in health. The analysis focused on 470 middle and senior support staff of this hospital, based on the theoretical-methodological support of the Social Representations Theory. A combination of the following instruments was used for data collection: a free wordassociation test, a questionnaire, an interview and a field journal. Evoc 2000 software was used to identify representational structure. Chi-square and Mann-Whitney tests, at a significance level of 5%, were performed to verify the association between the independent variables and the occurrence of work accidents. In addition, thematic content analysis and lexicographic analysis by ALCESTE software program were used to understand textual content. It was observed that social representations of work-related accidents in the health area are centered in the contamination category, while the categories of prevention and professional unpreparedness are found peripherally. There was a significant association between the existence of multiple employment, the use of personal protective equipment (PPI) during work, job satisfaction and the occurrence of work accidents. The conclusions indicate that perforating-cutting occupational accidents predominated in the hospital and that the representations of the subjects intertwined, with a traditional discourse of work accidents strongly present in Occupational Health. It is therefore suggested that certain subjective aspects related to culture, in terms of controlling work accidents, such as: management, process, organization and the increasing precariousness

Testes bioquímicos para avaliação do vigor em sementes de Mimosa caesalpiniaefolia Benth

Mimosa caesalpiniaefolia Benth. is a forest species of the Mimosaceae family, recommended for recovery of degraded areas. The evaluation of vigor by biochemical tests have been an important tool in the control of seed quality programs, and the electrical conductivity and potassium leaching the most efficient in the verifying the physiological potential. The objective, therefore, to adjust the methodology of the electrical conductivity test for seeds of M. caesalpiniaefolia, for then compare the efficiency of this test with the potassium in the evaluation of seed vigor of different lots of seeds M. caesalpiniaefolia. To test the adequacy of the electrical conductivity were used different combinations of temperatures , 25 °C and 30 ºC, number of seeds , 25 and 50, periods of imbibition , 4 , 8 , 12 , 16 and 24 hours , and volumes deionized water, 50 mL and 75mL. For potassium leaching test, which was conducted from the results achieved by the methodology of the adequacy of the electrical conductivity test, to compare the efficiency of both tests , in the classification of seeds at different levels of vigor, and the period 4 hours also evaluated because the potassium leaching test can be more efficient in the shortest time . The best combination obtained in experiment of electrical conductivity is 25 seeds soaked in 50 mL deionized or distilled water for 8 hours at a temperature of 30 ° C. Data were subjected to analysis of variance, the means were compared with each other by F tests and Tukey at 5 % probability, and when necessary polynomial regression analysis was performed. The electrical conductivity test performed at period eight hour proved to be more efficient in the separation of seed lots M. caesalpiniaefolia at different levels of vigor compared to the potassium test

CREATION: técnica de criatividade para geração de ideias de novos produtos

Creativity is a skill found in all individuals and one of the strategies used to intensify it is through the application of creativity techniques. In order to propose a new technique for generating new crafts product ideas, this dissertation, which is part of a research project of the Federal University of Rio Grande do Norte, through action research, intervened in three state communities artisans - Lajes Pintada, Massaranduba and Vera Cruz - to develop the artisans creative potential. Based on the techniques studied in the literature, we selected three techniques for interventions, composing two dynamics - one to improve features and functionalities of existing products, with the technique of SCAMPER; and the other to generate ideas for creating new products, with techniques Listing and Random Words / Figures. These latter techniques were not satisfactory in its objective by presenting constraints, not covered in the description, for the participant group. Thus, it was necessary to propose a new technique for the same purpose, the technique CREATION Clarify technique, Realized creativity, Explain, Apply for word, Think fast, Interpret, Organize ideas, Now evaluate, composed of twelve steps. To use the new technique requires that it be used by a dynamic that takes into account three phases: Planning, Application and Analysis. In the new technique application were generated around 30 ideas, regarded as new, in six sessions, from test pilot to interventions in artisans communities

Infra-estrutura para avaliação e testes de protocolos sociais de comunicação em ambientes tridimencionais compartilhados

The advent of the Internet stimulated the appearance of several services. An example is the communication ones present in the users day-by-day. Services as chat and e-mail reach an increasing number of users. This fact is turning the Net a powerful communication medium. The following work explores the use of communication conventional services into the Net infrastructure. We introduce the concept of communication social protocols applied to a shared virtual environment. We argue that communication tools have to be adapted to the Internet potentialities. To do that, we approach some theories of the Communication area and its applicability in a virtual environment context. We define multi-agent architecture to support the offer of these services, as well as, a software and hardware platform to support the accomplishment of experiments using Mixed Reality. Finally, we present the obtained results, experiments and products

Uma solução para geração automática de trilhas em língua brasileira de sinais em conteúdos multimídia

Deaf people have serious difficulties to access information. The support for sign languages is rarely addressed in Information and Communication Technologies (ICT). Furthermore, in scientific literature, there is a lack of works related to machine translation for sign languages in real-time and open-domain scenarios, such as TV. To minimize these problems, in this work, we propose a solution for automatic generation of Brazilian Sign Language (LIBRAS) video tracks into captioned digital multimedia contents. These tracks are generated from a real-time machine translation strategy, which performs the translation from a Brazilian Portuguese subtitle stream (e.g., a movie subtitle or a closed caption stream). Furthermore, the proposed solution is open-domain and has a set of mechanisms that exploit human computation to generate and maintain their linguistic constructions. Some implementations of the proposed solution were developed for digital TV, Web and Digital Cinema platforms, and a set of experiments with deaf users was developed to evaluate the main aspects of the solution. The results showed that the proposed solution is efficient and able to generate and embed LIBRAS tracks in real-time scenarios and is a practical and feasible alternative to reduce barriers of deaf to access information, especially when human interpreters are not available

Maximização da penetração da geração distribuída através do algoritmo de otimização nuvem de partículas

This work develops a methodology for defining the maximum active power being injected into predefined nodes in the studied distribution networks, considering the possibility of multiple accesses of generating units. The definition of these maximum values is obtained from an optimization study, in which further losses should not exceed those of the base case, i.e., without the presence of distributed generation. The restrictions on the loading of the branches and voltages of the system are respected. To face the problem it is proposed an algorithm, which is based on the numerical method called particle swarm optimization, applied to the study of AC conventional load flow and optimal load flow for maximizing the penetration of distributed generation. Alternatively, the Newton-Raphson method was incorporated to resolution of the load flow. The computer program is performed with the SCILAB software. The proposed algorithm is tested with the data from the IEEE network with 14 nodes and from another network, this one from the Rio Grande do Norte State, at a high voltage (69 kV), with 25 nodes. The algorithm defines allowed values of nominal active power of distributed generation, in percentage terms relative to the demand of the network, from reference values

Modelo matemático para otimização dos custos de um sistema híbrido eólico-solar : aplicação no bombeamento de petróleo

This work purposes the application of a methodology to optimize the implantation cost of an wind-solar hybrid system for oil pumping. The developed model is estimated the implantation cost of system through Multiple Linear Regression technique, on the basis of the previous knowledge of variables: necessary capacity of storage, total daily energy demand, wind power, module power and module number. These variables are gotten by means of sizing. The considered model not only can be applied to the oil pumping, but also for any other purposes of electric energy generation for conversion of solar, wind or solar-wind energy, that demand short powers. Parametric statistical T-student tests had been used to detect the significant difference in the average of total cost to being considered the diameter of the wind, F by Snedecor in the variance analysis to test if the coefficients of the considered model are significantly different of zero and test not-parametric statistical by Friedman, toverify if there is difference in the system cost, by being considered the photovoltaic module powers. In decision of hypothesis tests was considered a 5%-significant level. The configurations module powers showed significant differences in total cost of investment by considering an electrical motor of 3 HP. The configurations module powers showed significant differences in total cost of investment by considering an electrical motor of 5 HP only to wind speed of 4m/s and 6 m/s in wind of 3 m, 4m and 5 m of diameter. There was not significant difference in costs to diameters of winds of 3 m and 4m. The mathematical model and the computational program may be used to others applications which require electrical between 2.250 W and 3.750 W. A computational program was developed to assist the study of several configurations that optimizes the implantation cost of an wind-solar system through considered mathematical model

Protótipo de uma unidade com tri-geração de energia para utilizações remotas: aplicação de módulo secondutivo gerador termoelétrico

The generation for termoeletricity is characterized as a solid process of conversion of thermal energy (heat) in electric without the necessity of mobile parts. Although the conversion process is of low efficiency the system presents high degree of trustworthiness and low requisite of maintenance and durability. Its principle is based on the studies of termogeneration carried through by Thomas Seebeck in 1800. The frank development of the technologies of solid state for termoeletricity generation, the necessity of the best exploitation of the energy, also with incentive the cogeneration processes, the reduction of the ambient impact allies to the development of modules semiconductors of high efficiency, converge to the use of the thermoeletric generation through components of solid state in remote applications. The work presents the development, construction and performance evaluation of an prototype, in pilot scale, for energy tri-generation aiming at application in remote areas. The unit is composed of a gas lamp as primary source of energy, a module commercial semiconductor for thermoelectric generation and a shirt for production of the luminosity. The project of the device made compatible a headstock for adaptation in the gas lamp, a hot source for adaptation of the module, an exchanger of to be used heat as cold source and to compose first stage of cogeneration, an exchanger of tubular heat to compose second stage of cogeneration, the elaboration of a converter dc-dc type push pull, adequacy of a system of acquisition of temperature. It was become fullfilled assembly of the prototype in group of benches for tests and assay in the full load condition in order to evaluate its efficiency, had been carried through energy balance of the unit. The prototype presented an electric efficiency of 0,73%, thermal of 56,55%, illumination of 1,35% and global of 58,62%. The developed prototype, as the adopted methodology of assay had also taken care of to the considered objectives, making possible the attainment of conclusive results concerning to the experiment. Optimization in the system of setting of the semicondutor module, improvement in the thermal insulation and design of the prototype and system of protection to the user are suggestions to become it a commercial product

Análise estatística das emissões de CO e HC produzidas por gases da exaustão veicular oriundos de gasolina, GNV e mistura álcool/gasolina

The vehicles are the main mobile sources of carbon monoxide (CO) and unburned hydrocarbons (HC) released into the atmosphere. In the last years the increment of the fleet of vehicles in the municipal district of Natal-RN it is contributing to the increase of the emissions of those pollutants. The study consisted of a statistical analysis of the emissions of CO and HC of a composed sample for 384 vehicles with mechanization Gasoline/CNG or Alcohol/Gasoline/CNG of the municipal district of Natal-RN. The tests were accomplished in vehicles submitted to Vehicular Safety's Inspection, in the facilities of INSPETRANS, Organism of Vehicular Inspection. An partial gases analyzer allowed to measure, for each vehicle, the levels of CO and HC in two conditions of rotation of the motor (900 and 2500 rpm). The statistical analysis accomplished through the STATISTICA software revealed a sensitive reduction in the efficiency of the converters catalytic after 6 years of use with emission average it is of 0,78% of CO and 156 (ppm) of HC, Which represents approximately 4 (four) times the amount of CO and the double of HC in comparison with the newest vehicles. The result of a Student s t-test, suggests strongly that the average of the emissions of HC (152 ppm), at 900 rpm, is 40% larger than at 2500 rpm, for the motor without load. This result reveals that the efficiency of the catalytic conversion is limited kinetically in low engine speeds. The Study also ends that when comparing the emissions of CO and HC considering the influence of the fuels, it was verified that although the emissions of CO starting from CNG are 62% smaller than arising from the gasoline, there are not significant differences among the emissions of HC originating from of CNG and of the gasoline. In synthesis, the results place the current criteria of vehicular inspection, for exhaust gases, in doubt, leading the creation of emission limits of pollutant more rigorous, because the efficiency of the converters catalytic is sensibly reduced starting from 6 years of use. It is also raised the possibility of modifications in the test conditions adopted by the current norms, specifically in the speed engine, have seen that in the condition without load the largest emission indexes were registered in slow march. That fact that allows to suggest the dismissal of the tests in high speed engine, reducing the time of inspection in half and generating economy of fuel