Desenvolvimento de uma formulação cólon específica visando o tratamento da colite ulcerativa

Micro and nanoparticulate systems as drug delivery carriers have achieved successful therapeutic use by enhancing efficacy and reducing toxicity of potent drugs. The improvement of pharmaceutical grade polymers has allowed the development of such therapeutic systems. Microencapsulation is a process in which very thin coatings of inert natural or synthetic polymeric materials are deposited around microsized particles of solids or around droplets. Products thus formed are known as microparticles. Xylan is a natural polymer abundantly found in nature. It is the most common hemicellulose, representing more than 60% of the polysaccharides existing in the cell walls of corn cobs, and is normally degraded by the bacterial enzymes present in the colon of the human body. Therefore, this polymer is an eligible material to produce colon-specific drug carriers. The aim of this study was to evaluate the technological potential of xylan for the development of colon delivery systems for the treatment of inflammatory bowel diseases. First, coacervation was evaluated as a feasible method to produce xylan microcapsules. Afterwards, interfacial cross-linking polymerization was studied as a method to produce microcapsules with hydrophilic core. Additionally, magnetic xylan-coated microcapsules were prepared in order to investigate the ability of producing gastroresistant systems. Besides, the influence of the external phase composition on the production and mean diameter of microcapsules produced by interfacial cross-linking polymerization was investigated. Also, technological properties of xylan were determined in order to predict its possible application in other pharmaceutical dosage forms

A gestão do conhecimento e a inovação tecnológica como fatores de sobrevivência e de competitividade na sociedade do conhecimento: uma análise exploratória das MPEs do Rio Grande do Norte

The study examines the process of Knowledge Management and Technological Innovation in Small and Micro Enterprises (SME) in Rio Grande do Norte, Brazil, and proposes actions that can contribute to regional development and competitiveness of SME. Presents as technological innovation can help to make the SME entrepreneurial activities with innovative and competitive. Defines the phases and activities of the construction of knowledge in small organizations. Examines the process of Innovation, Research and Development (R & D) in SME. Identifies the use of knowledge management and technological innovation in management practices and social interaction to influence the competitiveness of SME. Covers the communities of practice as a diffuser of knowledge and learning. To obtain the data were used questionnaires with closed questions with multiple choice, direct observations and interviews with companies. The questionnaires and interviews covered the topics of Innovation, Knowledge Management and Competitive Intelligence on SME. The sample consisted of a total of 13 Small and Micro Enterprises Award winning MPE Brazil Competitiveness, sponsored by SEBRAE in the State of Rio Grande do Norte. The assessment questionnaires dealing with the Knowledge Management (KM Diagnostics - Model Bukowitz and Williams, 2002) and the process of Technological Innovation (Adaptation of ANPEI - National Association for Research, Development and Engineering of Innovative Companies). With the analysis, we concluded that the SME perceive knowledge management, but not formalized management practices so as to facilitate the dissemination of information. Soon, these companies need additional supports to direct them to the innovative activities that generate added value and competitiveness in the market

Fatores de sucesso no desenvolvimento de novos produtos em pequenas empresas: um estudo de caso em um fabricante de equipamentos para gás natural veicular

This study presents itself as a contribution to the solidification of the Natural Gas industry, within the scope of the development of new products. The goal of this paper is to analyze the factors that lead to the success of new products through the evaluation of the activities done during the process of development of these products in the Natural Gas sector. To achieve this goal a case study was done in a small company of this segment. At first, as a basis for the study, a bibliographical research was done with books, theses, dissertations, monographies, publications in national and international periodicals, congress annals and publications in the internet related to the subject. Afterwards, a case study was done, aiming at the acquisition of further knowledge about the real process of development of products in a small company of the Natural Gas sector, allowing for the performance of the evaluation. The case study was done at Gas Project and Systems do Brasil, a company that works with the development of electronic equipment to the conversion of car engines to natural gas, through direct observations and interviews with the person responsible for the development and management of products. Through the evaluation of the process it was observed that the activities related to it are done in an informal way and some activities are considered unnecessary for their success. The results also suggest an emphasis in the technological activities, something that was not observed in the activities related to the market. The instruments used in this evaluation prove to be efficient to evaluate the process of development of new products in other companies, including those of different areas. Taking into account the relevance of the studied theme to the strengthening of the Natural Gas industry, it is necessary to do further complementary studies

Avaliação dos processos de seleção utilizados nos programas de fomento a inovação nas micro e pequenas empresas da fundação de amparo à pesquisa do Rio Grande do Norte

Technological innovation promotes the generation of economic value by creating a new product, process or organizational management model, being classified as dynamic and multidimensional. Government intervention has the role of acting through government grant programs to foster the integration of innovative processes in small companies, due to the high costs and risks of development, strengthening the country`s economy in this phase. The distribution of this grant is determined by criteria, based especially in subjective judgments, which are based on the beliefs and perceptions about the technological opportunities and market actors involved in the process, being very difficult to measure the probability of success of the project under evaluation. This study aims to identify the most relevant selection criteria that must be inserted in grants programs at Rio Grande do Norte executed by Fundação de Pesquisa do Rio Grande do Norte (FAPERN). Initially, there was a systematization of 18 countries, covering 41 programs in foreign countries and 29 in Brazil. Based on the data collected, we conducted one survey containing four programs of FAPERN (INOVA I, INOVA II , INOVA III and INOVA IV), covering 44 companies and analyzing their responses according to the Likert scale , obtaining the degree of importance given by the respondent to each of the criteria in the questionnaire . As a result, drew up a proposal for new criteria to be used in the next FAPERN´s grants, containing 13 new criteria. It is expected, therefore, to contribute to a better spending of public funds invested in companies subsidized in Brazil

Avaliação da interação universidade - empresas - governo no desenvolvimento de projetos inovadores no RN por micro e pequenas empresas

Knowledge and innovation were seen as major forces, both for survival, as the acquisition of competitive advantages in the Brazilian economy, as well as adding value to the product as a market differentiator. The Triple Helix model is directed toward the knowledge-based economy. Over the past six years, the Federal Government through the Financier of Studies and Projects ( FINEP ) invested in technological innovation projects, economic subsidies, about U.S. $ 1 billion supporting more than 800 projects with these resources. According to the MCTI , the Northeast, over the years 2000 to 2010 increased spending on Science and Technology (considering the activities of research and development more scientific and related activities) of the State Government in relation to its total revenue In 2000, 0.51% of total revenues were invested in Science & Technology, while in 2010 this figure increased to 1.31%. Among the nine Northeast states, Paraíba is highlighted. In 2000, 0.33% of its total revenues were directed to innovation, reaching 2.04% in 2010, the largest increase in the region while the RN invested 0.24% in 2000 and in 2010 reached the level of 1.42 %. According to IBGE, in the period 2000-2011, the micro and small enterprises surpassed the barrier of 6 million establishments. In 2000, there were 4.2 million establishments while in 2011 were 6.3 million active establishments. Therefore, throughout the period, there was a creation of approximately 2.1 million new establishments. Between 2000 and 2011, micro and small businesses have created 7.0 million formal jobs, 8.6 million jobs in 2000 to 15.6 million in 2011. This scenario shows the importance of this study in relation to the investment of governments in RD & I in micro and small enterprises. This study aims to analyze the interaction Universities - Business - Government in the development of innovation in micro and small companies in Rio Grande do Norte participants of the edicts of Inova FAPERN. We chose to adopt as a research method case study concerning the procedure of the research, exploratory, descriptive, and on documents with engineers and researchers of innovation projects approved by PAPPE Subsidy (Inova -RN I, II and III). Data collection was done through the report made by FAPERN entitled: " Evaluation of companies financed and supported by the Grant Program for Technological Innovation for Micro and Small Enterprises RN - INOVA -RN " (2010) and a questionnaire with 40 closed questions and 1 opened to 30 affirmative composed based on a 5-point Likert scale. The analysis of data was qualitative and quantitative. The study provided to identify the importance and barriers arising from the relation between Government Enterprise (micro and small) and University as essential to the economic development of the region. It was also identified that, in the innovation projects, 70% of the goods or services originating from research were to market these, 50% resulted in a patent for the company and 80% publications of scientific articles

Avaliação da potencialidade de argilas de queima clara como matérias-primas para o desenvolvimento de novos produtos cerâmicos

The industries of structural ceramics are among the most important production chains in the state of Rio Grande do Norte. The industry and other interest groups to target the replacement of firewood by natural gas. Studies accordingly concluded that simple change does not guarantee products of superior quality, and that the increase in spending on fuel can economically cripple the use of gas for burning the majority of products manufactured by that action. However some proposals of innovations in terms of process and product are being studied in an attempt to justify the use of natural gas in industry, structural ceramics. One of the aspects investigated is the development of ceramic products differentiated, with new designs and greater value added. Inserted in that context, this paper aims to investigate the potential use of clay-firing clear fabrication of the "bricks of apparent joins drought", a new ceramic product with an innovative way. The development of the work was done in three stages. In the initial stage was held the characterization of raw materials, sought information on physical, chemical, mineralogical and mechanical samples. In the second stage five bodies were made using two of the nine ceramic clay characterized the first step. The masses were analyzed and compared with respect to the size distribution, plasticity and technological properties. In the last part of this work was carried out tests on massive bricks manufactured on an industrial scale. The results show that the nine clays can be used in the manufacture of new ceramic products, is the only constituent of mass ceramic or by mixing with other(s) clay(s

Estudo e caracterização de matérias-primas para o desenvolvimento de blocos sílico-calcários

The types of products manufactured calcium silicate blocks are very diversified in its characteristics. They include accessory bricks, blocks, products in dense material, with or without reinforcements of hardware, great units in cellular material, and thermal insulating products. The elements calcium silicate are of great use in the prefabricated construction, being formed for dense masses and hardened by autoclaving. This work has for objective develop formulations that make possible the obtaining of calcium silicate blocks with characteristics that correspond the specifications technical, in the State of the Rio Grande of the North, in finality of obtaining technical viability for use in the civil construction. The work studied the availability raw materials from convenient for the production of calcium silicate blocks, and the effect of variations of the productive process on the developed products. The studied raw materials were: the quartz sand from the city of São Gonçalo do Amarante/RN, and two lime, a hydrated lime and a pure lime from the city of Governador Dix-Sept Rosado/RN. The raw materials collected were submitted a testes to particle size distribution, fluorescence of X rays, diffraction of X rays. Then were produced 8 formulations and made body-of-test by uniaxial pressing at 36 MPa, and cured for 7 hours at about 18 kgf/cm2 pressing and temperature of approximately 180 °C. The cure technological properties evaluated were: lineal shrinkage, apparent density, apparent porosity, water absorption, modulus of rupture flexural (3 points), resistance compression, phase analysis (XRD) and micromorphological analysis (SEM). From the results presented the technological properties, was possible say that utilization of hydrated lime becomes more viable its utilization in mass limestone silica, for manufacture of calcium silicate blocks

Avaliação do processo industrial da cerâmica vermelha na região do Seridó - RN

Particularly in Braziland in Rio Grande do Norte, companies manufacturing red ceramic, play an important role as agents of development to study the region Seridó- RN, specific place for carrying out the research. It is observed in this region a concentration of red ceramic industries of small size, which, despite its importance in the ceramic, they are unable to enjoy or use the new forms of administrative management and technological advances designed and offered by universities, centers of research and projects of governments, remained almost entirely outside the progress and modernization, technological and administrative. These companies still have outdated technology, and management processes, providing quality problems and standardization of end products. Upon these conditions are the companies going through crisis and struggling to survive alone and without assistance. The region of Seridó-RN, lets make a detailed case study of red ceramic companies in the region proposed from the existing theoretical and actual lifting of the condition of the product manufacturing red ceramic, allowing through this overview of the implementation of collect samples of raw materials, allowing the study of each ceramic industry that contributed to the participation of the research, which was determined parameters such as: analysis of the physical, chemical and technological properties of raw materials, characterization of the processes used, raising the technological resources considering equipment, machinery, supplies, raw materials and facilities available and its organization by type of products from companies involved in this study. The methodology consists of the following steps: collection of raw material, crushing and screening, characterization of raw materials (liquid limit, chemical analysis, mineralogical analysis, differential thermal analysis, sieve analysis), mixing, forming, cutting, drying and burning of ceramic bodies and bodies of evidence. The results showed that it was clay with distinct characteristics with respect to plasticity. With respect to the different compositions of mixtures of ceramic masses, we conclude that the ceramic properties showed a direct proportionality with increasing fraction of the clay not plastic. However, the compositions of the masses studied proved to be the most appropriate for the types of simulated clay for use in ceramics. Adopted in the ceramic processing made it possible to obtain products the resulted in consistent properties, and in some cases even exceeding the requirements of technical studies and standard-Brazilian clays to obtain ceramic products such as tiles, bricks and tiles to floor. Based on the discussions from the results obtained in the various processing steps of this work, one can draw conclusions according to the physico-chemical and mineralogical properties of raw materials, the properties of ceramic products burned and analysis. This work may be used by other researchers, private companies and governmental organizations, undergraduate students and graduate, can develop studies and future research to: develop projects to modify the furnaces; mapping projects develop and rationalize the exploitation of raw materials ;promoting reforestation and forest management; develop reduction projects and recovery of waste; develop training projects in manpower sector, and develop security projects, improving the conditions of work in the area pottery

A engenharia simultânea e o perfil da indústria de confecção da grande Natal/RN utilizando as ferramentas CAD/PDM e ERP

This work presents the research carried through in the industrial segment of confection of clothes of the Great Natal whose objective is to show the profile, enterprise and technological management as also the use of simultaneous engineering in the development of products. The research approaches two studies. The first one presents the current picture of the companies, synthesized through twelve variable. As, through fifteen variable it shows to the level of use of Simultaneous Engineering in the Development of Products and its amplitude in relation to the Integrated Management using tools CAD, PDM and ERP (Computer Aided Design, Product Management Date, Enterprise Resource Planning). The integration of these systems acts aiming the reduction of the cost and the development time of products. The reached results indicate that simultaneous engineering is a competitive advantage and becomes possible: to reduce the life cycle of the product, to rationalize the resources, to incorporate one high standard of the quality to the process and product as well as to personalize the product to take care of the global market. It is important to note that this work also is considered to contribute for the better understanding of the real companies situation of confection located at the Great Natal and its role in the economy of the State of the Rio Grande do Norte

Estudo da viabilidade técnica do uso das argilas da região do agreste potiguar para produção de peças cerâmicas: caracterização e formulação

In recent decades, ceramic products have become indispensable to the technological development of humanity, occupying important positions in scientific production and consequently in industrial production. One area of the economy that continues to absorb large amounts of the products of this sector is Construction. Among the branches of the ceramic industry, there are the red ceramic industry which is traditionally the basis of that economic sector. Among the reasons for which the red ceramic industry became popular in the country, and specifically in Rio Grande do Norte, is the abundance of this raw material, easily found throughout the national territory. However, it appears that the red ceramic industry has deficiencies in technology and skilled labor, resulting in the production of ceramic goods with low added value. Among the factors that determine the quality of the ceramic products red has the proper formulation of the ceramic mass, the conformation and the firing temperature. Thus, the overall goal of this work is to study the mineralogical and technological properties, two clays from the region of the Wasteland Potiguar industrial ceramist. Therefore, the raw materials were characterized by analysis of Xray diffraction (XRD) analysis, X-ray fluorescence (XRF), particle size analysis (FA), scanning electron microscopy (SEM), optical microscopy (OM ), plasticity index (PI), thermal gravimetric analysis (TGA) and differential thermal analysis (DTA). The technological properties of the material were analyzed by water absorption tests (AA%) porosity (% PA), the linear shrinkage (RT%), apparent density (MEA), loss on ignition (PF%) and flexural strength three points (TRF)

Análise técnica e econômica do processo de obtenção de espaguetes com adição de farinha de trigo integral e farinha de linhaça

This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional

Obtenção de Propriedades Físico-Químicas de Misturas de Hidrocarbonetos em Baixa e Alta Pressão Visando a Caracterização e a Modelagem

The composition of petroleum may change from well to well and its resulting characteristics influence significantly the refine products. Therefore, it is important to characterize the oil in order to know its properties and send it adequately for processing. Since petroleum is a multicomponent mixture, the use of synthetic mixtures that are representative of oil fractions provides a better understand of the real mixture behavior. One way for characterization is usually obtained through correlation of physico-chemical properties of easy measurement, such as density, specific gravity, viscosity, and refractive index. In this work new measurements were obtained for density, specific gravity, viscosity, and refractive index of the following binary mixtures: n-heptane + hexadecane, cyclohexane + hexadecane, and benzene + hexadecane. These measurements were accomplished at low pressure and temperatures in the range 288.15 K to 310.95 K. These data were applied in the development of a new method of oil characterization. Furthermore, a series of measurements of density at high pressure and temperature of the binary mixture cyclohexane + n-hexadecane were performed. The ranges of pressure and temperature were 6.895 to 62.053 MPa and 318.15 to 413.15 K, respectively. Based on these experimental data of compressed liquid mixtures, a thermodynamic modeling was proposed using the Peng-Robinson equation of state (EOS). The EOS was modified with scaling of volume and a relatively reduced number of parameters were employed. The results were satisfactory demonstrating accuracy not only for density data, but also for isobaric thermal expansion and isothermal compressibility coefficients. This thesis aims to contribute in a scientific manner to the technological problem of refining heavy fractions of oil. This problem was treated in two steps, i.e., characterization and search of the processes that can produce streams with economical interest, such as solvent extraction at high pressure and temperature. In order to determine phase equilibrium data in these conditions, conceptual projects of two new experimental apparatus were developed. These devices consist of cells of variable volume together with a analytical static device. Therefore, this thesis contributed with the subject of characterization of hydrocarbons mixtures and with development of equilibrium cells operating at high pressure and temperature. These contributions are focused on the technological problem of refining heavy oil fractions

A motivação e o significado do trabalho de bancários: estudo comparativo entre dois momentos do processo de reestruturação produtiva

This master s dissertation deals with motivation and the meaning of work amongst bank employees. This is done considering a cognitive perception. Work is understood here under a social and subjective comprehension, once it deals with significance attribution. Motivation is the process that rules choice of the different possibilities of individual behavior, all of which according to the Expectation Theory. This study aims to analyze the implications of the productive restructure, since it is related to technological innovation, organizational changes and management, in motivation and work significance. Thus, the objective of the research is to verify motivational differences and the meaning of work amongst bank employees. This is done in two distinct moments of the productive restructure of bank employees in Natal-RN. The research is divided in two parts. In the first one, changes that occurred in banks between 1999 until 2005 were identified by the means of interviews with 7 bank managers. The analyzed perspective was training intensifying, quality emphasis of customer attendance, the use of automation/technology, staff stabilization, change in staff profile, work intensification, etc. In the second study the Inventory of Motivation and Work Meaning was applied. Thus, questions related to work focus, social demographic data, in 187 bank employees were dealt with. The collected data was compared to data from previous work. It was observed that productive restructure has a reflection in the meaning of work increasing self-expression, economical reward, and responsibility in work conditions. All of the item mention beforehand maintain the level of inhumanness and consummation and respond as being the characteristics of the real work environment. On the other hand, bank employees value less justice, self-expression and more the survival perspective, implying instrumental values to work. As for motivation, it is increased among bank employees. These employees have greater expectations that their work produce results since they believe in their interference in work results

Uma abordagem para promover o alinhamento entre a estratégia de negócio e a tecnologia de informação

Currently with the increase in complexity in doing business, organizations are seeking information systems that help to quickly respond to new demands in the processes of production of products and services. An information system is no longer just a support tool and has become an integral part of doing business. However, in spite of significant technological evolution in recent years, information systems that support business do not respond efficiently to the constant alterations that occur in many organizations. One of the main problems faced by information systems currently is the lack of strategic alignment between business strategy and information technology. The concept of strategic alignment can be defined as a way between business strategies and objectives and the strategies, objectives and functions of information technology in such as way as to contribute to the increase in competitivity of the organization over time. Strategic alignment together with strategic planning are important management instruments. Approaches for operationalizing this alignment are being developed currently but are still in their initial stages due to the fact that it is a relatively new concept in the literature. Another point that needs to be taken into consideration during the strategic alignment is the question of trackability between the business elements and IT. Trackability (Tracking) is necessary for example when one wishes to know exactly which goal defined in the business strategy was left out or not accepted due to a modification made in the IT strategy. Very few proposals present concrete ways supported by software systems in order to obtain strategic alignement while taking into consideration this trackability. Therefore the objective of this work is to propose the creation of a strategic alignment process supported by a software system which is capable of permitting trackability between the organizational objectives and the business processes based on formalization standards defined through a model oriented approach

Síntese e caracterização estrutural e magnética da ferrita de cálcio

The calcium ferrite (Ca2Fe2O5) has a perovskite-type structure with oxygen deficiency and is used as a chemical catalyst. With the advent of nanoscience and nanotechnology, methods of preparation, physical and chemical characterizations, and the technological applications of nanoparticles have attracted great scientific interest. Calcium nanostructured ferrites were produced via high-energy milling, with subsequent heat treatment. The milling products were characterized by X-ray diffraction, magnetization and Mössbauer spectroscopy. Samples of the type Ca2Fe2O5 were obtained from the CaCO3 and Fe2O3 powder precursors, which were mixed stoichiometrically and milled for 10h and thermally treated at 700ºC, 900ºC and 1100ºC. The Mössbauer spectra of the treated samples were adjusted three subespectros: calcium ferrite (octahedral and tetrahedral sites) and a paramagnetic component, related to very small particles of calcium ferrite, which are in a superparamagnetic state. For samples beats in an atmosphere of methyl alcohol, there is a significant increase in area associated with the paramagnetic component. Hysteresis curves obtained are characteristic of a weak ferromagnetic-like material