Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Modificação do eletrodo AWS E7018 com adição de filmes finos externos de PVC e Al, para soldagem de aço C-Mn

This paper suggests modifications in coating of electrodes providing an alternative for execution of welding with low hydrogen electrode AWS E7018 without having to dry it, reducing thus the cost and time of manufacturing of high resistance welds. The welds in this research were developed with basic coated electrodes (hygroscopic) – SMAW process – externally painted with aluminum spray paint for high temperatures or wrapped with thin plastic films (PVC) and aluminum foil films used commonly for food protection. The basic premise is that establishing a barrier between the atmosphere and the electrode coating could reduce the effects of high hygroscopicity presented by coatings of low hydrogen, minimizing this way the main source of supply of hydrogen to the fusion pool during welding. It is also expected that the addition of new materials from the electrode coating to the fusion pool would induce metallurgical changes in the deposited metal and, as a consequence, modifications in its mechanical properties. This research dealt with measuring the dissolved hydrogen in the deposited metal after welding with modified electrodes, evaluating the influence of these changes in the produced microstructures and in the mechanical properties of the resulting weld, and comparing the obtained results with the standard welding procedures and with the recently developed waterproof electrodes. The results obtained in most samples welded with modified electrodes showed increased mechanical resistance and increased tenacity due to the increased percentage of acicular ferrite in metal deposited without significant elevation of hardness, when compared with the traditional welding with AWS E7018 electrode and with ELBRÁS BRH4R waterproof electrode. The diffusing hydrogen measured in the modified electrodes was kept inside the parameters defined by international codes.

Educação ambiental como estratégia para inserção da sustentabilidade na formação em odontologia

This thesis proposes environmental education as a strategy for the inclusion of sustainability in the academic education of higher level. The dentistry course has been the object of study, which is justified by the recognition of the need for reflection on environmental issues in the dental academia, initially based on professional experience of the author as a dental surgeon. The aim of this study is to investigate the scientific production of dentistry and its content related to environmental issues, in addition to expanding discussions and reflections on the need to insert environmental education as academic content. With the specific purpose of verifying the amount and analyze the content of scientific articles involving issues related to sustainability in dentistry, Chapter 01 presents research in leading journals portals available on the internet. Works were surveyed where sustainability and related issues were present and placed in a theoretical framework that analyzes the dental service inclusion in the dominant economic model. These procedures are intended to prove the hypothesis that the dental profession does not produce significant scientific content that relates the profession to the environment and sustainability. A literature review was conducted with the statement of dentistry changes from its origins to the front position to the dominant development model and exemplification of the deleterious effects of this model on the environment. In addition, there was a scientific research in journals portals available on the internet and investigated the amount and content of scientific articles involving issues related to sustainability in dentistry. Chapter 02 has the specific purpose of providing content to expand discussions and reflections on the need to insert environmental education in undergraduate courses in dentistry, such as insertion strategy into a new development model guided by sustainability. In this, students questionnaires were given the 8th dentistry course of the period the Federal University of Rio Grande do Norte (UFRN), to be understood environmental perception of learners and were obtained grants for proof of the thesis that environmental education applied dentistry has the potential to make people aware and willing to act practicing and propagating sustainability in their conduct. The overall results indicate little scientific production, as the research and work that relates to dentistry to sustainability and the issues related to the environment have not significantly been present in the syllabus of the undergraduate courses in dentistry, despite the interest shown by survey respondents When such issues are addressed. In this context, it is proposed fostering actions to environmental education, so that dental professionals are engaged in the construction of a new development model based on sustainability, as despite the environmental theme seems to be little explored in the academic and scientific world of dentistry, there interest from students and great potential multiplier for appropriate environmental behavior. After proving the hypothesis that the environment-related content are poorly explored in the academic and scientific world of dentistry, the main conclusions were recognizing the importance of environmental education as an interdisciplinary tool for environmental thematic approach in undergraduate courses dentistry, in addition to implementing this new pedagogical proposal in the professional practice of dentists, given their potential multiplier for environmental knowledge.

A organização da demanda em serviços públicos de saúde bucal: universalidade, eqüidade e integralidade em saúde bucal coletiva

RONCALLI, Angelo Giuseppe. A organização da demanda em serviços públicos de saúde bucal: universalidade, eqüidade e integralidade em Saúde Bucal Coletiva. raçatuba, 2000. 238p. Tese (Doutorado em Odontologia Preventiva e Social). Faculdade de Odontologia, Universidade Estadual Paulista “Júlio de Mesquita Filho”

Influencia do meloxicam sobre a perda ossea alveolar em periodontite experimental: avaliaçao histometrica em ratos

GURGEL, Bruno Cesar de vasconcelos.Influencia do meloxicam sobre a perda ossea alveolar em periodontite experimental: avaliaçao histometrica em ratos. 2003.97f. Dissertaçao (Mestrado) - Universidade Estadual de Campinas. Faculdade de Odontologia de Piracicaba. Piracicaba, 2003. Disponivel em: . Acesso em: 04 out. 2010.

Saúde bucal no programa de saude da família: o caso do distrito sanitário norte em Natal - RN

The inclusion of the dentist in the Family Health Program (FHP) teams designates a reorganization of the mouth health care in your country and establishes a new scenario in Brazilian odontology, through of a new way to organize the basic health care, creating conditions to consolidate in mouth health practice actions, in the level of the basic attention, the validation of Unique Health System (UHS) constitutional principles. The purpose of this research is to verify if the actuation of mouth health teams (MHT) dentists, in Natal city north sanitary district, is tuned with FHP goals.The target research population was composed by all dentists working in Basic Health Units (BHU) of Natal north sanitary district. Fifth-eight questionnaires were applied and using open and closed questions we look for identify the functional characteristics of each BHU, the dentists professional attributions on each BHU, as well as the clinical procedures that they execute. This research also searched to identify the factors that facilitate and/or difficult the inclusion process and the dentists activities performance on these BHUs, as well as the necessary actions to north sanitary district MHTs to fulfill the objectives proposed by FHP. The results point that the inclusion of mouth health actions in north sanitary district FHPs brought the incorporation of new values to the used practices. Whoever, its necessary a more frequent evaluation of the carried actions, in a way they can be adapted to the real community necessities, and, is fundamental the data accompaniment, for that these serve of base for planning and redirecting activities, in a way that we do not have only a reproduction of traditional practices, fragmented and isolated, but a truly substitution of the traditional practices and a new way of promoting health

Estudo de sistemas vítreos para infiltração em alumina

The system in-Ceram Alumina, produced by VITA, consists in a technique of prepare of a substructure of ceramics to dental crowns. First burning is made in the alumina decanted by slip casting process under a stone die that reproduces the tooth prepared to receive a crown. In a second burning, alumina is infiltrated by vitreous system, giving to this set a high mechanic resistance. In this work, it s made a study of the composition of a new infiltrating material more used nowadays, giving to alumina desirable mechanics proprieties to its using like substructure of support to ceramic s crown used in the market today. The addition of Lanthanum oxide (frit A) and calcium oxide (frit B) was made in attempt to increase the viscosity of LZSA and to reduce fusion temperature. The frits were put over samples of alumina and took to the tubular oven to 1400ºC under vacuum for two groups (groups 1 and 2). For another two groups (groups 3 and 4) it was made a second infiltration, following the same parameters of the first. A fifth group was utilized like group of control where the samples of pure alumina were not submitted to any infiltrating process. Glasses manifested efficient both in quality and results of analysis of mechanic resistance, being perfectly compatible with oral environment in this technical requisite. The groups that made a second infiltration had he best results of fracture toughness, qualify the use in the oral cavity in this technical question. The average of results achieved for mechanic resistance to groups 1, 2, 3, 4 and 5 were respectively 98 MPa, 90 MPa, 144 MPa, 236 MPa and 23 MPa

Análise de falhas em martelos oscilantes dos desfibradores da indústria sucroalcooleira da Região Norte-Nordeste

The failure of materials is always an unwelcome event for several reasons: human lives are put in danger, economic losses, and interference in the availability of products and services. Although the causes of failures and behaviour of materials can be known, the prevention of such a condition is difficult to be guaranteed. Among the failures, wear abrasion by the low voltage is the kind of failure that occurs in more equipment and parts industry. The Plants Sucroalcooleiras suffer significant losses because of such attrition, this fact that motivated their choice for the development of this work. For both, were considered failures in the swing hammers desfibradores stopped soon after the exchange provided in accordance with tonnage of cane processed, then were analyzed by the level of wear testing of rubber wheel defined by the standard ASTM G65-91.The failures were classified as to the origin of the cause and mechanism, moreover, were prepared with samples of welding procedures according to ASME code, sec. IX as well, using the technique of thermal spraying to analyze the performance of these materials produced in laboratories, and compares them with the solder used in the plant. It was observed that the bodies-of-proof prepared by the procedure described as welding, and the thermal spraying the results of losing weight have been minimized significantly compared to the preparations in the plant. This is because the use of techniques more appropriate and more controlled conditions of the parameters of welding. As for the thermal spraying, this technique has presented a satisfactory result, but requires the use of these coatings in the best condition for real affirmation of the results

Análise e avaliação dos elementos de penetração no solo de equipamentos rodoviários após revestimento

The main objective is to analyze the abrasive wear resistance to the low stress of the elements that make up the organs of road machinery that are exposed directly to contact with abrasives. These samples were analyzed after these elements are coated superficially by the process of welding electrode coated with (SAER) and the manual process of coating type LVOF thermal spraying. As well, is to provide suggestions for a better recovery and return of these elements, which are reducing costs and avoiding downtime in the fronts of service. The samples were made from a substrate of carbon ABNT 1045 tempered steel, following the same specifications and composition of metals and alloys of constituents was followed the standard governing the dimensions of these samples and in accordance with the corresponding size. The results were evaluated by testing the hardness, abrasion resistance to wear by the low stress and the loss of volume involving the microstructure of coatings analyzed

Estudo da zircônia reforçado com alumina

Ceramics materials have good properties including chemical stability, high hardness and wear resistance. Moreover, due to its fragility, can suffer failure under relatively low levels of tension. Actually zirconia is the material of choice in metal free dental prostheses used in dentistry due its inertia in physiological environment, good bending strength, hardness and fracture toughness. The alumina and mixed tungsten and titanium carbides additions, acting as reinforcement elements in the zirconia matrix, have as their main objective the improvement of mechanical properties of this material. In this work, samples of zirconia, zirconia with 30% wt of alumina and zirconia with 30% wt mixed carbides were analyzed. The samples were sintered by uniaxial hot pressing on 30 MPa pressure, for 1 hour in an argon atmosphere. They were physically characterized by porosity and density measurements, and mechanically by 3-points bending strength and Vickers microhardness. The X-ray diffraction was used for the phase identifications and microstructure was examined by scanning electron microscopy (SEM). The addition of mixed carbides as reinforcement elements in zirconia matrix provides improvements in all properties analyzed in this work. The alumina addition has dropped the zirconia strength, although it caused improvement in other properties

Efeito da moagem de alta energia na microestrutura e nas propriedades magnéticas do compósito wc-10%p.Co

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Associação entre as narrativas em saúde bucal e condições socioeconômico-culturais: a dentição como reflexo da desigualdade social

This anthropological study investigates the lived-experience of oral diseases in the context of poverty in Northeast Brazil. During six months in 2004???, ethnographic interviews, narratives and participant-observation with 31 residents of the low-income community, Dendê, located in Fortaleza, Ceará were conducted and analyzed utilizing a hermeneutic-dialetic method. It is revealed that precarious life conditions make prioritizing caretaking a difficult task. Despite suffering tooth pain, seeking a dentist's care is perceived as "a luxury" not a citzens' right. Difficulties in accessing services and poor quality restorations, favor tooth extractions as the most effective intervention. The deterioration of one's oral health is lamented by community members who seek help from popular clinics, politicians and traditional healers. The experience of dental disease differs according to social class, leaves oral scars of inequity, harms self-esteem and inhibits social inclusion. In this context, "treating" the Teeth of Inequity demands that we deepen our comprehension of the social determinants of health, reduce injustice in the access to quality care, remove demoralizing stigmas and empower the community to confront structural forces which affect its life

Pesquisa odontológica no Brasil: características da produção científica no início do século XXI

Dentistry, as a science and field of knowledge, has presented a substantial development in the last decades in the areas of research and education. The aim of this study was to evaluate the Brazilian scientific production in Dentistry, as from their methodological outlining, which characterizes the XXI Century. Five thousand two hundred and three study abstracts were evaluated, comprising works presented in the meetings of the Brazilian Society of Dentistry Research (SBPqO), during the period of 2001 to 2006. The main results identify that, as for the methodology used in the researches, there was a predominance of the studies of an individuate, interventionist and longitudinal nature; of the researches in the areas of Dentistry, Periodontology, Endodontics, Pedodontics and Collective Oral Health and experimental studies about clinical researches or with collective subjects. The inter and multidisciplinarity are pointed out in the outlining of this study, as the triad Education-Health-Research is discussed, so that they transcend in their fields of action, in the direction of the transdisciplinarity. It is concluded that, in the studied period, there was a reasonable and balanced production in Brazilian dental field