70 resultados para Socio-environmental impacts


Relevância:

80.00% 80.00%

Publicador:

Resumo:

The expansion of shrimp farming has caused a series of environmental impacts, often as a result of lack of planning and adequate management. Organic aquaculture has emerged as an alternative to conventional shrimp farming, and differently, aims at the economical, ecological and farming potential of other organisms, such as fishes, oysters and seaweeds. The present study aimed at evaluating the biological diversity and abundance of the ichthyofauna associated to Litopenaeus vannamei organic culture at PRIMAR farm (Rio Grande do Norte, Brazil). The sampling period consisted of four culture cycles (1, 2, 3, and 4) accomplished in four grow-out ponds (V1, V7, V2, and V4) in 2005. The first two culture cycles were carried out during the rainy season, and the last two cycles, during the dry season. Environmental (temperature, salinity, transparency, and rainfall), biodiversity (diversity and uniformity and abundance indexes) of the ichthyofauna, and shrimp productivity data were collected throughout these four culture cycles. The results obtained for the environmental variables showed that both salinity and transparency oscillated in a significant way (p < 0.001) between culture cycles. In relation to the abundance of the ichthyofauna, fifty four species associated to the organic culture of Litopenaeus vannamei were collected and identified at PRIMAR. For the biodiversity criterion, larger species richness (S = 46) and uniformity (E = 0.59 ± 0.16) were observed during cycles 3 and 4 than in cycles 1 and 2 (S = 41 and E = 0.15 ± 0.12). A positive and significant correlation was obtained for the transparency with diversity and uniformity of fish species between cycles 1 and 2 (wet season) and cycles 3 and 4 (dry season) (p < 0.017 - Shannon Index; p < 0.008 - Pielou Index, respectively). A correlation could not be established between shrimp productivity and fish biomass. However, fish biomass decreased from cycles 1 and 2 to cycles 3 and 4, concomitant with an increase in shrimp productivity, most probably due to a higher (from 58.0% to 71.0%) shrimp survival. Regarding the culture potential of the ichthyofauna, three species (Mugil curema, Mugil liza and Chaetodipterus faber) were identified as potential farming alternatives, either singly or in consortium with Litopenaeus vannamei. A fourth species (Centropomus undecimalis) was indicated as an alternative for single culture or in consortium with other fish species. In conclusion, the large diversity of estuarine fishes associated to Litopenaeus vannamei farming observed at PRIMAR clearly indicated the ecological feasibility for organic aquaculture in northeastern Brazil

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The mining industry is responsible for the generation of waste from their natural process of extraction. The mining impacts in urban areas are of special importance due to the high urban occupation, which are exacerbated due to the proximity of the mined areas and populated areas. Some solutions to wastedisposal have the potential to significantly reduce the environmental risks and liabilities, but represent higher costs in the stages of deployment and operation. The addition of mining waste as raw material in the development of commercial products reduces the environmental impacts, transforming the waste into a positive element in the generation of employment and income. This thesis studies the incorporation of waste iron ore in two clays, one from the ceramic industry of the City of Natal and the other from the ceramic industry of the Seridó Region, both in the State of Rio Grande do Norte, Brazil. Percentages of iron ore waste of 5%, 10% , 15%, 20%, 25% and 30% were used in the tested ceramic matrix. The two clays and the iron ore waste used as part of this investigation were characterized by X-ray diffraction tests, X-ray fluorescence tests, differential thermal analysis, thermogravimetric analysis and dilatometric analysis. The samples were sintered under temperatures of 850 °C, 950 °C and 1050°C at a heating rate of 5 °C/min with isotherms of two hours. The following tests were performed with the samples: linear shrinkage, water absorption, apparent porosity, apparent density, mass loss in fire and bending resistance in order to obtain their physical and mechanical properties. An amount of 5% of waste iron ore in the matrix clay at a temperature of 850 0C resulted in na increase of about 65% in the tensile strength of the clay samples from the Natal ceramic industry. A linear shrinkage of only 0.12% was observed for the samples, which indicates that the physical properties of the final product were not influenced by the addition of the waste

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate new products, enlarging the cycle of materials and energy which are present. Among the polymeric residues, there is poly (ethylene terephthalate) (PET). PET is used in food packaging, preferably in the bottling of carbonated beverages. The reintegration of post-consumer PET in half can be considered a productive action mitigation of environmental impacts caused by these wastes and it is done through the preparation of several different products at the origin, i.e. food packaging, with recycling rates increasing to each year. This work focused on the development and characterization mechanical, thermal, thermo-mechanical, dynamic mechanical thermal and morphology of the pure recycled PET and recycled PET composites with glass flakes in the weight fraction of 5%, 10% and 20% processed in a single screw extruder, using the following analytical techniques: thermogravimetry (TG), differential scanning calorimetry (DSC), tensile, Izod impact, Rockwell hardness, Vicat softening temperature, melt flow rate, burn rate, dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). The results of thermal analysis and mechanical properties leading to a positive evaluation, because in the thermograms the addition of glass flakes showed increasing behavior in the initial temperatures of thermal decomposition and melting crystalline, Furthermore was observed growing behavior in the mechanical performance of polymer composites, whose morphological structure was observed by SEM, verifying a good distribution of glass flakes, showing difference orientation in the center and in the surface layer of test body of composites with 10 and 20% of glass flakes. The results of DMTA Tg values of the composites obtained from the peak of tan ä showed little reductions due to poor interfacial adhesion between PET and recycled glass flakes.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The environmental impacts, caused by the solid residues generation, are an often quoted concern nowadays. Some of these residues, which are originated from different human activities, can be fully reused, reducing the effects of the poor waste management on the environment. During the salt production process, the first formed crystals are discarded as industrial waste. This is mainly made of gypsum that is a calcium sulfate dihydrate (CaSO4.2H2O). The gypsum in question may go through a calcination process due to the plaster (CaSO4.0,5H2O) production and then the application on the cement industry. Considering the necessity of development and application for these industrial wastes, this paper aims to analyze the plaster, called Salgesso, from the gypsum that was generated during the salt production, and its use viability on the civil construction industry in order to create environmental and economical benefits. For characterization, the following experiments were performed: X-ray Fluorescence (XRF), X-ray Diffraction (XRD), thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM) with EDS. The following tests were also performed to obtain the mechanical characteristics: Thinness Modulus, Unit Mass, Setting Time and Compressive Resistance. Three commercial plasters used on civil construction were taken as references. All of these tests were performed according to the current standards. It was noticed that although there were some conflicting findings between the salt and commercial plasters in all of the studied properties, the Salgesso has its values within the standard limits. However, there is the possibility to improve them by doing a more effective calcination process. Three commercial plasters, used in construction, were used as reference material. All tests were performed according to standards in force. It was observed that although some tests present conflicting findings between the salt and gypsum plasters commercial properties in all of the studied Salgesso have values within the limits imposed by the standard, but can be improved simply by calcination process more effective

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Oil spills in marine environments represent immediate environmental impacts of large magnitude. For that reason the Environmental Sensitivity to Oil Maps constitute a major instrument for planning actions of containment and cleanup. For both the Environmental Sensitivity Maps always need to be updated, to have an appropriate scale and to represent accurately the coastal areas. In this context, this thesis presents a methodology for collecting and processing remote sensing data for the purpose of updating the territorial basis of thematic maps of Environmental Sensitivity to Oil. To ensure greater applicability of the methodology, sensors with complementary characteristics, which provide their data at a low financial cost, were selected and tested. To test the methodology, an area located on the northern coast of the Northeast of Brazil was chosen. The results showed that the products of ASTER data and image hybrid sensor PALSAR + CCD and HRC + CCD, have a great potential to be used as a source of cartographic information on projects that seek to update the Environmental Sensitivity Maps of Oil

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Actually in the oil industry biotechnological approaches represent a challenge. In that, attention to metal structures affected by electrochemical corrosive processes, as well as by the interference of microorganisms (biocorrosion) which affect the kinetics of the environment / metal interface. Regarding to economical and environmental impacts reduction let to the use of natural products as an alternative to toxic synthetic inhibitors. This study aims the employment of green chemistry by evaluating the stem bark extracts (EHC, hydroalcoholic extract) and leaves (ECF, chloroform extract) of plant species Croton cajucara Benth as a corrosion inhibitor. In addition the effectiveness of corrosion inhibition of bioactive trans-clerodane dehydrocrotonin (DCTN) isolated from the stem bark of this Croton was also evaluated. For this purpose, carbon steel AISI 1020 was immersed in saline media (3,5 % NaCl) in the presence and absence of a microorganism recovered from a pipeline oil sample. Corrosion inhibition efficiency and its mechanisms were investigated by linear sweep voltammetry and electrochemical impedance. Culture-dependent and molecular biology techniques were used to characterize and identify bacterial species present in oil samples. The tested natural products EHC, ECF and DCTN (DMSO as solvent) in abiotic environment presented respectively, corrosion inhibition efficiencies of 57.6% (500 ppm), 86.1% (500 ppm) and 54.5% (62.5 ppm). Adsorption phenomena showed that EHC best fit Frumkin isotherm and ECF to Temkin isotherm. EHC extract (250 ppm) dissolved in a polar microemulsion system (MES-EHC) showed significant maximum inhibition efficiency (93.8%) fitting Langmuir isotherm. In the presence of the isolated Pseudomonas sp, EHC and ECF were able to form eco-compatible organic films with anti-corrosive properties

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The aim of this study is the labour market at Natal Metropolitan Region with emphasis in occupations and incomes that took place at the nineties. The definition of its chronological boundaries passed by verification of existence of evident socio-spatial impacts for output, occupation and income in national economy, with rebounds in all national territory, conditioned by institutional and socio-economical transformations which marked Brazilian insertion to capital flows and commodities globalization movement that took place at the cited decade. It has been shown that such impacts did not distributed themselves equally between diverse spatial levels (great regions, federate unities, municipalities) because of historical specificities in each place in terms of output structures and organization of distinct social agents. Having as its basis the Marxist perspective, it tackled theoretically occupations and incomes, transformations in labour universe occurred at world level, mainly in most urbanized areas, and following that to focus changes occurred in Brazilian society related to the search for competitive insertion in global economy during the period regarded. Special attention was gave to Natal Metropolitan Region, because it was historically a concentration area for investments, productive structure, people, occupations and incomes generated/appropriated in Rio Grande do Norte State. The basic data sources for research were the demographic Census (micro data) made by the Instituto Brasileiro de Geografia e Estatística (IBGE) intending to present the structure and the labour market dynamics, having as basis: 1) traditional indicators about labour market; 2) sectors of economic activities and 3) social positions and classes segments. One of the purposes is the demonstration that occupations and incomes keep relation with the restructuring which occurred in each specific sector during the period. Other purpose is to make explicit the factors which bear the participation of distinct segments in production or service execution that make possible the different participation in income distribution. Results are revealing the increasin precariousness in labour market, enlargement of occupations in tertiary sector and greater concentration of average incomes in the social segments which were owners of the greatest capital allowances between residents in Natal Metropolitan Region during the nineties

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This doctoral thesis addresses the environmental issues and its vinculum with the tourism through the protected natural areas, in particular the conservation units, which consists in territorial areas created and demarcated by the government in order to protect ecosystems that have a high ecological and scenic-landscaped representativeness designed to the contemplation and controlled public visitation. In regard to its use for the touristic activities, are conceived while socio-environmental and symbolic materiality built around an imagery view of a nature-show, designed to attract visitors, aiming ensure the maintenance and reproduction of the capital in an entrepreneurial and preservationist way in the Metropolitan Region of Natal. It s a study about the Dunes State Park Jornalista José Maria Alves and the Jenipabu Environmental Protected Area, both created with the purpose of favor the implantation and empowerment of the touristic area through the State intervention as the main articulator agent of a new process of urbanization that uses the city marketing and the ideological discuss of environmental sustainability to recreate the imaginary of lost paradise and incorporate into the daily universe of tourists visiting the state of Rio Grande do Norte. The unveiling of this empirical reality made possible the construction and defense of the terms environmental entrepreneurship and compensatory preservationism, to explain how the formatting and idealization of this paradisiacal scenarios produce the commoditization of nature in an efficient and competitive way

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Universidade Estadual do Rio Grande do Norte

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This thesis is the result of an investigation about the transversality of the environmental issues into the daily curriculum of High Schools (from first to eighth grade). The research field was the county of Santo Antonio de Jesus in the state of Bahia, Brazil. The investigation is related with the challenge that the present model of social development and organization has put to the school institution: to bring the regular discussion about Environmental Education (EE) to the school s daily life. Facing the complexity of the socio-environmental issues and the basic functions of Education, the object of study was restricted to the identification of the challenges and paradoxes of the EE inside the curriculum organization of Politic-Pedagogic Project of the schools and the teachers daily practices. About the methodology, we adopted different references for the qualitative research: sociology, history, economy, and education. As for the investigative procedures about the teacher s practices, we related the school s daily practices to the context of the community. We also adopted several investigative procedures, such as questionnaires, interviews, observations and formative intervention. The theoretical basis was organized based on references to curriculum organization, environmental culture, teacher education and also considering the pillars of a capitalistic system that is based on consumerism and that generates social exclusion. At the initial considerations, we contextualized the contemporary environmental issues in an attempt to interpret the conditions of the EE transversality into the school s daily practices, which are still oriented to the traditional Cartesian Education. Based on the collected data, we found the reasons for the teachers dilemma and reluctances to the insertion of the environmental issues into the organization of the work plan and into the management of a school. Nevertheless, the results also signed promising possibilities to the EE tranversality, in case the curriculum of the school could be more sensible towards the cultural and social-economical issues of a community. We especially questioned The National Curriculum Parameter s (PCN), which is considered highly insufficient to inform the teachers about the environmental issues, facing the actual local conditions of social and pedagogic work. The final considerations showed the role and the importance of this research as one strategy to organize the curriculum education into the perspective of the transversality of environmental issues inside the education of both teacher and student

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This study addresses issues related to the mathematical knowledge and practices of the workers of carcinoculture (shrimp farming), associating such knowledge and practices to the conceptual aspects and the academic mathematical language. Our central aim was to investigate and discuss such knowledge and practices in order to contribute towards having the members of this group reflect upon their own working practices. The investigation took as reference the ethnographic research approach during observations and interviews, as well as the analysis and interpretation of the existing cultural aspects on the use of Mathematics in the shrimp farmers daily activities, thus composing the four chapters of this dissertation. Initially, the local-regional context was set in the area where the workers of the shrimp farm reside, also describing our methodological options. After that, the kind of work that was carried out is explained through a brief history of the shrimp-farming activity, including a short discussion on the environmental impacts that result as a consequence of shrimp-farming. We then discuss some theoretical and practical aspects of the Ethnomathematics while field of study and research. At that moment, we make a reflection upon the different kinds of Mathematics, especially stressing the kind of Mathematics being taught in Schools and that being put to practice by identifiable cultural groups. With that in mind, we show the investigated knowledge and practices e some possible systematizations accomplished during the study. In the end, we point out some conclusive propositions based on the implications of our study towards the development of an educational process within the local communities, considering a possible use of the results and conclusions of this study in the classroom activities

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This work contains the problematic of sub-education among the population that was excluded from school attendance in the regular time, contributing to knowledge production about educational practices developed in EJA (the Young and Adult Education). It focuses on the Pedagogical proposal and on the experience in young and adult literacy in the context of the mobilization of people affected by dam building. It depicts the international, national and regional mobilization against huge dams building and the emergence of the Movement of Dam Affected People (MAB), highlighting their general project and registering their teaching performance, particularly in young and adult literacy. In methodological and theoretical approaches, two interconnected categories are considered: the historical entirety, essentially theoretical, and the young and adult education practice. Based on the entirety, it outlines a contextualized explanation about the stakeholder s situation and, respecting the second category, which is part of the first one, places literacy as one of the basic aspects of an omnilateral man upbringing. The study broaches a wide context of dams in the world, placing the socio-environmental effects resulting from dams building in Brazil, in Northeast region and in Paraíba, and emphasizing the consequences of Acauã Dam building in the Paraíba cities of Aroeiras, Itatuba and Natuba. It presents the particular context of the population affected by Acauã, summarizing a panoramic view about the involved Paraíba cities and learning the conditions of residents relocation. It appraises the educational project and the National-MAB literacy proposal, operationalized by Paraíba-MAB in resettlements sited on Acauã s surroundings. It ensures that, besides public policies including financing, the feasibility of literacy problem solution can be completed with Pedagogical actions attached to the target people peculiarities and immediate necessities, respecting actions connected through one comprehensive and contextualized educational project. It evaluates the young and adult literacy project developed in the restricted Paraíba-MAB area, as an example of a Pedagogical action minimally contextualized. Eventually, it recommends researchers and teachers in general, that are committed to this work perspective, to pay attention to the way they articulate discussions and participation, so as to contemplate these communities expectations and necessities in Pedagogical projects and spaces based on discussion, dialogue and collective reflection