Sistemas de automação e supervisão do laboratório de avaliação dos processos de medição de vazão e BSW

During a petroleum well production process, It is common the slmultaneous oil and water production, in proportion that can vary from 0% up to values close to 100% of water. Moreover, the production flows can vary a lot, depending on the charaeteristies of eaeh reservoir. Thus being, the meters used in field for the flow and BSW (water in the oil) measurement must work well in wide bands of operation. For the evaluation of the operation of these meters, in the different operation conditions, a Laboratory will be built in UFRN, that has for objective to evaluate in an automatic way the processes of flow and BSW petroleum measurement, considering different operation conditions. The good acting of these meters is fundamental for the accuracy of the measures of the volumes of production liquid and rude of petroleum. For the measurement of this production, the petroleum companies use meters that should indicate the values with tha largast possible accuracy and to respect a series of conditions and minimum requirements, estabelished by the united Entrance ANP/INMETRO 19106/2000. The laboratory of Evafuation of the Processes of Measurement of Flow and BSW to be built will possess an oil tank basically, a tank of water, besides a mixer, a tank auditor, a tank for separation and a tank of residues for discard of fluids, fundamental for the evaluation of the flow metars and BSW. The whole process will be automated through the use of a Programmable Logicat Controller (CLP) and of a supervisory system.This laboratory besides allowing the evaluation of flow meters and BSW used by petroleum companies, it will make possible the development of researches related to the automation. Besides, it will be a collaborating element to the development of the Computer Engineering and Automation Department, that it will propitiate the evolution of the faculty and discente, qualifying them for a job market in continuous growth. The present work describes the project of automation of the laboratory that will be built at of UFRN. The system will be automated using a Programmable Logical Controller and a supervisory system. The programming of PLC and the screens of the supervisory system were developed in this work

Automação da detecção de fraudes em sistemas de medição de energia elétrica utilizando lógica fuzzy em ambiente SCADA

This works presents a proposal to make automatic the identification of energy thefts in the meter systems through Fuzzy Logic and supervisory like SCADA. The solution we find by to collect datas from meters at customers units: voltage, current, power demand, angles conditions of phasors diagrams of voltages and currents, and taking these datas by fuzzy logic with expert knowledge into a fuzzy system. The parameters collected are computed by fuzzy logic, in engineering alghorithm, and the output shows to user if the customer researched may be consuming electrical energy without to pay for it, and these feedbacks have its own membership grades. The value of this solution is a need for reduce the losses that already sets more than twenty per cent. In such a way that it is an expert system that looks for decision make with assertivity, and it looks forward to find which problems there are on site and then it wont happen problems of relationship among the utility and the customer unit. The database of an electrical company was utilized and the datas from it were worked by the fuzzy proposal and algorithm developed and the result was confirmed

Sistema de gerência de informação de processos industriais via Web

The structure of Industrial Automation bases on a hierarchical pyramid, where restricted information islands are created. Those information islands are characterized by systems where hardware and software used are proprietors. In other words, they are supplied for just a manufacturer, doing with that customer is entailed to that supplier. That solution causes great damages to companies. Once the connection and integration with other equipments, that are not of own supplier, it is very complicated. Several times it is impossible of being accomplished, because of high cost of solution or for technical incompatibility. This work consists to specify and to implement the visualization module via Web of GERINF. GERINF is a FINEP/CTPetro project that has the objective of developing a software for information management in industrial processes. GERINF is divided in three modules: visualization via Web, compress and storage and communication module. Are presented results of the utilization of a proposed system to information management of a Natural Gas collected Unit of Guamar´e on the PETROBRAS UN-RNCE.

Uma arquitetura para sistemas supervisórios industriais e sua aplicação em processos de elevação artificial de petróleo

The using of supervision systems has become more and more essential in accessing, managing and obtaining data of industrial processes, because of constant and frequent developments in industrial automation. These supervisory systems (SCADA) have been widely used in many industrial environments to store process data and to control the processes in accordance with some adopted strategy. The SCADA s control hardware is the set of equipments that execute this work. The SCADA s supervision software accesses process data through the control hardware and shows them to the users. Currently, many industrial systems adopt supervision softwares developed by the same manufacturer of the control hardware. Usually, these softwares cannot be used with other equipments made by distinct manufacturers. This work proposes an approach for developing supervisory systems able to access process information through different control hardwares. An architecture for supervisory systems is first defined, in order to guarantee efficiency in communication and data exchange. Then, the architecture is applied in a supervisory system to monitor oil wells that use distinct control hardwares. The implementation was modeled and verified by using the formal method of the Petri networks. Finally, experimental results are presented to demonstrate the applicability of the proposed solution

Controle Robusto Aplicado a Conversor Buck-Boost em Sistemas Fotovoltaicos

The need to implement a software architecture that promotes the development of a SCADA supervisory system for monitoring industrial processes simulated with the flexibility of adding intelligent modules and devices such as CLP, according to the specifications of the problem, it was the motivation for this work. In the present study, we developed an intelligent supervisory system on a simulation of a distillation column modeled with Unisim. Furthermore, OLE Automation was used as communication between the supervisory and simulation software, which, with the use of the database, promoted an architecture both scalable and easy to maintain. Moreover, intelligent modules have been developed for preprocessing, data characteristics extraction, and variables inference. These modules were fundamentally based on the Encog software

Avalição de reusabilidade de aplicações web baseadas em frameworks orientados a ações e a componentes: estudo de Caso sobre os Frameworks Apache Struts e JavaServer Faces

Over the years the use of application frameworks designed for the View and Controller layers of MVC architectural pattern adapted to web applications has become very popular. These frameworks are classified into Actions Oriented and Components Oriented , according to the solution strategy adopted by the tools. The choice of such strategy leads the system architecture design to acquire non-functional characteristics caused by the way the framework influences the developer to implement the system. The components reusability is one of those characteristics and plays a very important role for development activities such as system evolution and maintenance. The work of this dissertation consists to analyze of how the reusability could be influenced by the Web frameworks usage. To accomplish this, small academic management applications were developed using the latest versions of Apache Struts and JavaServer Faces frameworks, the main representatives of Java plataform Web frameworks of. For this assessment was used a software quality model that associates internal attributes, which can be measured objectively, to the characteristics in question. These attributes and metrics defined for the model were based on some work related discussed in the document

Uma arquitetura de referência para o desenvolvimento de sistemas interativos multiplataformas

It is increasingly common use of a single computer system using different devices - personal computers, telephones cellular and others - and software platforms - systems graphical user interfaces, Web and other systems. Depending on the technologies involved, different software architectures may be employed. For example, in Web systems, it utilizes architecture client-server - usually extended in three layers. In systems with graphical interfaces, it is common architecture with the style MVC. The use of architectures with different styles hinders the interoperability of systems with multiple platforms. Another aggravating is that often the user interface in each of the devices have structure, appearance and behaviour different on each device, which leads to a low usability. Finally, the user interfaces specific to each of the devices involved, with distinct features and technologies is a job that needs to be done individually and not allow scalability. This study sought to address some of these problems by presenting a reference architecture platform-independent and that allows the user interface can be built from an abstract specification described in the language in the specification of the user interface, the MML. This solution is designed to offer greater interoperability between different platforms, greater consistency between the user interfaces and greater flexibility and scalability for the incorporation of new devices

Um ambiente para especificação e execução AD-HOC de processos de negócio baseados em serviços Web

Recently the focus given to Web Services and Semantic Web technologies has provided the development of several research projects in different ways to addressing the Web services composition issue. Meanwhile, the challenge of creating an environment that provides the specification of an abstract business process and that it is automatically implemented by a composite service in a dynamic way is considered a currently open problem. WSDL and BPEL provided by industry support only manual service composition because they lack needed semantics so that Web services are discovered, selected and combined by software agents. Services ontology provided by Semantic Web enriches the syntactic descriptions of Web services to facilitate the automation of tasks, such as discovery and composition. This work presents an environment for specifying and ad-hoc executing Web services-based business processes, named WebFlowAH. The WebFlowAH employs common domain ontology to describe both Web services and business processes. It allows processes specification in terms of users goals or desires that are expressed based on the concepts of such common domain ontology. This approach allows processes to be specified in an abstract high level way, unburdening the user from the underline details needed to effectively run the process workflow

Tvoice :um sistema de manipulação de linguagens para auxiliar portadores de necessidades especiais através da web

This work presents the tVoice, software that manipulates tags languages, extracting information and, being integral part of the VoiceProxy system, it aids bearers of special needs in the access to the Web. This system is responsible for the search and treatment of the documents in the Web, extracting the textual information contained in those documents and preceding the capability of generating eventually through translation techniques, an audio script, used by the of interface subsystem of VoiceProxy, the iVoice, in the process of voice synthesis. In this stage the tVoice, besides the treatment of the tag language HTML, processes other two formats of documents, PDF and XHTML. Additionally to allow that, besides the iVoice, other interface subsystems can make use of the tVoice through remote access, we propose distribution systems techniques based in the model Client-Server providers operations of the fashion of a proxy server treatment of documents

Uma máquina de redução de grafos para serviços web

Web services are software accessible via the Internet that provide functionality to be used by applications. Today, it is natural to reuse third-party services to compose new services. This process of composition can occur in two styles, called orchestration and choreography. A choreography represents a collaboration between services which know their partners in the composition, to achieve the service s desired functionality. On the other hand, an orchestration have a central process (the orchestrator) that coordinates all application operations. Our work is placed in this latter context, by proposing an abstract model for running service orchestrations. For this purpose, a graph reduction machine will be defined for the implementation of service orchestrations specified in a variant of the PEWS composition language. Moreover, a prototype of this machine (in Java) is built as a proof of concept

Um método semi-automatizado para elicitação de requisitos de acessibilidade Web

In the context of Software Engineering, web accessibility is gaining more room, establishing itself as an important quality attribute. This fact is due to initiatives of institutions such as the W3C (World Wide Web Consortium) and the introduction of norms and laws such as Section 508 that underlie the importance of developing accessible Web sites and applications. Despite these improvements, the lack of web accessibility is still a persistent problem, and could be related to the moment or phase in which this requirement is solved within the development process. From the moment when Web accessibility is generally regarded as a programming problem or treated when the application is already developed entirely. Thus, consider accessibility already during activities of analysis and requirements specification shows itself a strategy to facilitate project progress, avoiding rework in advanced phases of software development because of possible errors, or omissions in the elicitation. The objective of this research is to develop a method and a tool to support requirements elicitation of web accessibility. The strategy for the requirements elicitation of this method is grounded by the Goal-Oriented approach NFR Framework and the use of catalogs NFRs, created based on the guidelines contained in WCAG 2.0 (Web Content Accessibility Guideline) proposed by W3C

Certificação de composições de serviços web semânticos

This thesis presents a certification method for semantic web services compositions which aims to statically ensure its functional correctness. Certification method encompasses two dimensions of verification, termed base and functional dimensions. Base dimension concerns with the verification of application correctness of the semantic web service in the composition, i.e., to ensure that each service invocation given in the composition comply with its respective service definition. The certification of this dimension exploits the semantic compatibility between the invocation arguments and formal parameters of the semantic web service. Functional dimension aims to ensure that the composition satisfies a given specification expressed in the form of preconditions and postconditions. This dimension is formalized by a Hoare logic based calculus. Partial correctness specifications involving compositions of semantic web services can be derived from the deductive system proposed. Our work is also characterized by exploiting the use of a fragment of description logic, i.e., ALC, to express the partial correctness specifications. In order to operationalize the proposed certification method, we developed a supporting environment for defining the semantic web services compositions as well as to conduct the certification process. The certification method were experimentally evaluated by applying it in three different proof concepts. These proof concepts enabled to broadly evaluate the method certification

Uma abordagem para avaliação e tratamento de exceções propagadas no uso de serviços Web em .Net

High dependability, availability and fault-tolerance are open problems in Service-Oriented Architecture (SOA). The possibility of generating software applications by integrating services from heterogeneous domains, in a reliable way, makes worthwhile to face the challenges inherent to this paradigm. In order to ensure quality in service compositions, some research efforts propose the adoption of verification techniques to identify and correct errors. In this context, exception handling is a powerful mechanism to increase SOA quality. Several research works are concerned with mechanisms for exception propagation on web services, implemented in many languages and frameworks. However, to the extent of our knowledge, no works found evaluates these mechanisms in SOA with regard to the .NET framework. The main contribution of this paper is to evaluate and to propose exception propagation mechanisms in SOA to applications developed within the .NET framework. In this direction, this work: (i)extends a previous study, showing the need to propose a solution to the exception propagation in SOA to applications developed in .NET, and (ii) show a solution, based in model obtained from the results found in (i) and that will be applied in real cases through of faults injections and AOP techniques.

Cloud query manager: uso de web semântica para evitar o problema de aprisionamento em IaaS

Cloud computing can be defined as a distributed computational model by through resources (hardware, storage, development platforms and communication) are shared, as paid services accessible with minimal management effort and interaction. A great benefit of this model is to enable the use of various providers (e.g a multi-cloud architecture) to compose a set of services in order to obtain an optimal configuration for performance and cost. However, the multi-cloud use is precluded by the problem of cloud lock-in. The cloud lock-in is the dependency between an application and a cloud platform. It is commonly addressed by three strategies: (i) use of intermediate layer that stands to consumers of cloud services and the provider, (ii) use of standardized interfaces to access the cloud, or (iii) use of models with open specifications. This paper outlines an approach to evaluate these strategies. This approach was performed and it was found that despite the advances made by these strategies, none of them actually solves the problem of lock-in cloud. In this sense, this work proposes the use of Semantic Web to avoid cloud lock-in, where RDF models are used to specify the features of a cloud, which are managed by SPARQL queries. In this direction, this work: (i) presents an evaluation model that quantifies the problem of cloud lock-in, (ii) evaluates the cloud lock-in from three multi-cloud solutions and three cloud platforms, (iii) proposes using RDF and SPARQL on management of cloud resources, (iv) presents the cloud Query Manager (CQM), an SPARQL server that implements the proposal, and (v) comparing three multi-cloud solutions in relation to CQM on the response time and the effectiveness in the resolution of cloud lock-in.

Desenvolvimento de sistemas embarcados para redes de sensores e atuadores sem fio aplicadas em unidades de elevação de petróleo do tipo Plunger-Lift

The Wireless Sensor Networks (WSN) methods applied to the lifting of oil present as an area with growing demand technical and scientific in view of the optimizations that can be carried forward with existing processes. This dissertation has as main objective to present the development of embedded systems dedicated to a wireless sensor network based on IEEE 802.15.4, which applies the ZigBee protocol, between sensors, actuators and the PLC (Programmable Logic Controller), aiming to solve the present problems in the deployment and maintenance of the physical communication of current elevation oil units based on the method Plunger-Lift. Embedded systems developed for this application will be responsible for acquiring information from sensors and control actuators of the devices present at the well, and also, using the Modbus protocol to make this network becomes transparent to the PLC responsible for controlling the production and delivery information for supervisory SISAL