66 resultados para Relação causa-efeito


Relevância:

40.00% 40.00%

Publicador:

Resumo:

Linseed is an important oilseed consumed raw as nutritional supplement, that although represents a rich source of nutrients, its nutritional value could be impaired due to the presence of antinutritional factors. In this study, protein fractions from raw linseed flour were extracted and isolated being obtained 12% of albumins, 82% of globulins, 5% of glutelins and 1% of prolamins. These proteins were visualized by SDS-PAGE and albumins showed low molecular mass protein bands around 21 kDa and minor bands, similar to that of trypsin inhibitor; Globulins presented protein bands with high molecular masses, which possibly are constituents of multimeric proteins, such as legumins. After determination of the centesimal composition of raw linseed, it was used as exclusive protein source for young rats to evaluate its effect on animal growth. The results showed negative effects on rat growth (weight gain 73% less than the control group) and reduction of intestinal villus (35%), that could be related with in vitro and in vivo globulin digestibility and proteinaceous antinutritional factors (mammalian digestive enzymes inhibitors and lectins) in albumin fraction. Native globulins showed, by SDS-PAGE, low susceptibility in vitro to trypsin and chymotrypsin, however presented high degradation by pancreatin. Thermal treatment of globulins for 5 and 15 minutes at 100ºC improved considerably its digestibility by trypsin and pancreatin. Globulins presented 93.2% in vivo digestibility, similar to the control protein. Albumin fraction had high trypsin inhibition activity (100%) and chymotrypsin inhibition of 28.3%; haemagglutinating activity was not detected. The results of this study indicate the negative action of trypsin inhibitors on animal growth, but can not be discarded its combined action with other antinutritional factors, which could compromise the raw linseed utilization as an alternative food

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Lightweight oilwell cement slurries have been recently studied as a mean to improve zonal isolation and sheath-porous formation adherence. Foamed slurries consisting of Portland cement and air-entraining admixtures have become an interesting option for this application. The loss in hydrostatic pressure as a consequence of cement hydration results in the expansion of the air bubbles entrapped in the cement matrix, thus improving the sheath-porous formation contact. Consequently, slurries are able to better retain their water to complete the hydration process. The main objective of the present study was to evaluate the effect of the addition of an air-entraining admixture on the density, stability and permeability of composite slurries containing Portland cement and diatomite as light mineral load. Successful formulations are potential cementing materials for low fracture gradient oilwells. The experimental procedures used for slurry preparation and characterization were based on the American Petroleum Institute and ABNT guidelines Slurries containing a pre-established concentration of the air-entraining admixture and different contents of diatomite were prepared aiming at final densities of 13 to 15 lb/gal. The results revealed that the reduction of 15 to 25% of the density of the slurries did not significantly affect their strength. The addition of both diatomite and the air-entraining admixture increased the viscosity of the slurry providing better air-bubble retention in the volume of the slurry. Stable slurries depicted bottom to top density variation of less than 1.0 lb/gal and length reduction of the stability sample of 5.86 mm. Finally, permeability coefficient values between 0.617 and 0.406 mD were obtained. Therefore, lightweight oilwell cement slurries depicting a satisfactory set of physicochemical and mechanical properties can be formulated using a combination of diatomite and air-entraining admixtures for low fracture gradient oilwells

Relevância:

40.00% 40.00%

Publicador:

Resumo:

We have recently verified that the monoamine depleting drug reserpine at doses that do not modify motor function - impairs memory in a rodent model of aversive discrimination. In this study, the effects of reserpine (0.1-0.5 mg/kg) on the performance of rats in object recognition, spatial working memory (spontaneous alternation) and emotional memory (contextual freezing conditioning) tasks were investigated. While object recognition and spontaneous alternation behavior were not affected by reserpine treatment, contextual fear conditioning was impaired. Together with previous studies, these results suggest that mild monoamine depletion would preferentially induce deficits in tasks involved with emotional contexts. Possible relationships with cognitive and emotional processing deficits in Parkinson disease are discussed

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The objective is to analyze the relationship between risk and number of stocks of a portfolio for an individual investor when stocks are chosen by "naive strategy". For this, we carried out an experiment in which individuals select actions to reproduce this relationship. 126 participants were informed that the risk of first choice would be an asset average of all standard deviations of the portfolios consist of a single asset, and the same procedure should be used for portfolios composed of two, three and so on, up to 30 actions . They selected the assets they want in their portfolios without the support of a financial analysis. For comparison we also tested a hypothetical simulation of 126 investors who selected shares the same universe, through a random number generator. Thus, each real participant is compensated for random hypothetical investor facing the same opportunity. Patterns were observed in the portfolios of individual participants, characterizing the curves for the components of the samples. Because these groupings are somewhat arbitrary, it was used a more objective measure of behavior: a simple linear regression for each participant, in order to predict the variance of the portfolio depending on the number of assets. In addition, we conducted a pooled regression on all observations by analyzing cross-section. The result of pattern occurs on average but not for most individuals, many of which effectively "de-diversify" when adding seemingly random bonds. Furthermore, the results are slightly worse using a random number generator. This finding challenges the belief that only a small number of titles is necessary for diversification and shows that there is only applicable to a large sample. The implications are important since many individual investors holding few stocks in their portfolios

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Linseed is an important oilseed consumed raw as nutritional supplement, that although represents a rich source of nutrients, its nutritional value could be impaired due to the presence of antinutritional factors. In this study, protein fractions from raw linseed flour were extracted and isolated being obtained 12% of albumins, 82% of globulins, 5% of glutelins and 1% of prolamins. These proteins were visualized by SDS-PAGE and albumins showed low molecular mass protein bands around 21 kDa and minor bands, similar to that of trypsin inhibitor; Globulins presented protein bands with high molecular masses, which possibly are constituents of multimeric proteins, such as legumins. After determination of the centesimal composition of raw linseed, it was used as exclusive protein source for young rats to evaluate its effect on animal growth. The results showed negative effects on rat growth (weight gain 73% less than the control group) and reduction of intestinal villus (35%), that could be related with in vitro and in vivo globulin digestibility and proteinaceous antinutritional factors (mammalian digestive enzymes inhibitors and lectins) in albumin fraction. Native globulins showed, by SDS-PAGE, low susceptibility in vitro to trypsin and chymotrypsin, however presented high degradation by pancreatin. Thermal treatment of globulins for 5 and 15 minutes at 100ºC improved considerably its digestibility by trypsin and pancreatin. Globulins presented 93.2% in vivo digestibility, similar to the control protein. Albumin fraction had high trypsin inhibition activity (100%) and chymotrypsin inhibition of 28.3%; haemagglutinating activity was not detected. The results of this study indicate the negative action of trypsin inhibitors on animal growth, but can not be discarded its combined action with other antinutritional factors, which could compromise the raw linseed utilization as an alternative food

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Lightweight oilwell cement slurries have been recently studied as a mean to improve zonal isolation and sheath-porous formation adherence. Foamed slurries consisting of Portland cement and air-entraining admixtures have become an interesting option for this application. The loss in hydrostatic pressure as a consequence of cement hydration results in the expansion of the air bubbles entrapped in the cement matrix, thus improving the sheath-porous formation contact. Consequently, slurries are able to better retain their water to complete the hydration process. The main objective of the present study was to evaluate the effect of the addition of an air-entraining admixture on the density, stability and permeability of composite slurries containing Portland cement and diatomite as light mineral load. Successful formulations are potential cementing materials for low fracture gradient oilwells. The experimental procedures used for slurry preparation and characterization were based on the American Petroleum Institute and ABNT guidelines Slurries containing a pre-established concentration of the air-entraining admixture and different contents of diatomite were prepared aiming at final densities of 13 to 15 lb/gal. The results revealed that the reduction of 15 to 25% of the density of the slurries did not significantly affect their strength. The addition of both diatomite and the air-entraining admixture increased the viscosity of the slurry providing better air-bubble retention in the volume of the slurry. Stable slurries depicted bottom to top density variation of less than 1.0 lb/gal and length reduction of the stability sample of 5.86 mm. Finally, permeability coefficient values between 0.617 and 0.406 mD were obtained. Therefore, lightweight oilwell cement slurries depicting a satisfactory set of physicochemical and mechanical properties can be formulated using a combination of diatomite and air-entraining admixtures for low fracture gradient oilwells

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Objetivo: analisar a relação entre a idade materna e a ocorrência de resultados perinatais adversos na população do Rio Grande do Norte. Métodos: foram analisados os registros oficiais de 57.088 nascidos vivos no Estado do Rio Grande do Norte no ano de 1997. Os dados foram obtidos do Sistema de Informação sobre Nascidos Vivos do Ministério da Saúde. A população estudada foi dividida em Grupos I, II e III, segundo a faixa etária materna: 10 a 19, 20 a 34 e 35 anos ou mais, respectivamente. As variáveis analisadas foram: duração da gestação, peso ao nascer e tipo de parto. A análise estatística foi realizada utilizando-se o teste c2. Resultados: observamos uma maior incidência de parto pré-termo no Grupo I (4,3 %), em comparação ao Grupo II (3,7%) (p = 0,0028). A taxa de cesariana foi menor nos Grupos I e III, em comparação ao Grupo II (p<0,0001). Evidenciamos freqüência significativamente maior de recém-nascidos de baixo peso nos Grupos I (8,4%) e III (8,3%), quando comparados ao Grupo II (6,5%) (p<0,0001). Conclusões: a gravidez nos extremos da vida reprodutiva esteve associada com maior freqüência de parto pré-termo e baixo peso ao nascer, entretanto, com relação ao tipo de parto, foi observada maior freqüência de parto normal do que no grupo de gestantes com idade entre 20 e 34 anos

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Marine shrimp farming has grown exponentially during the last years in Brazil. In spite of the promising economical situation, this activity is facing an increasing criticism due to its environmental impact. Thus, the necessity of alternatives to mitigate environmental degradation caused by this activity. An alternative that is being studied is the policulture that is the integrated culture of two or more organisms, normally one of them a filtering organism. Among filtering organisms, macroalgae are very practicable because they are efficient in the removal of the exceeding nutrients of the water and do not leave residues in the water. Besides, the integrated culture with macroalgae allows the economical exploration of the seaweed (for the manufacture of jelly and jam, for the dairy industry, pharmaceuticals, etc.) along with possibility of a sustainable aquaculture. In the present experiment, the development of the seaweed Gracilaria birdiae, the influence and tolerance of this species to the environmental parameters, and its absorption efficiency in relation with the three kinds of macronutrients (NH4+, NO3- and PO4-3) found in the effluents of marine shrimp farming was studied. The experiment was divided in two parts: a laboratorial part and one part carried under natural conditions. The water used in the laboratory trial was collected in the shrimp ponds of Tecnarão farm and distributed in aquaria containing 20 g of G. birdiae. In the field trial, 0.5 kg of G. birdiae was inserted in PVC cages cultivated in the farm. The results of the study showed a modest growth of G. birdiae, probably due to its low tolerance to highly eutrophicated environments. However, the removal of nutrients was very expressive. Ammonia was reduced in approximately 34 %. Ortho-phosphate showed a reduction of 93.5 %. The capacity of biofiltration of the NO3- by the macro algae was of 100 %, showing that G. birdiae is a seaweed-filtered with a high level of removal for this nutrient under laboratorial conditions. In spite of the low growth of the macro algae in the experiment, the results in relation to the removal of nutrients of the water was encouraging, suggesting that this species can be an efficient biofilter and thus, a strong candidate to be used in a sustainable aquaculture

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Vitamin A deficiency is a serious public health problem in developing countries, and it causes death and blindness among children in the developing countries. The fortification of food could be an important source of vitamins to control deficiency. 60 Coturnix coturnix japonica quails were used in a randomized design with duration of seven weeks. The birds were assigned into five treatments with four repetitions. The objective was to evaluate the influence of the supplementation with different levels of retinyl palmitate (2,000 IU, 4,000 IU, 8,000IU and 16,000 IU) in quails under the levels of retinyl in egg yolks. The method used to dose retinyl in yolks of quail eggs was High Performance Liquid Chromatography and the enzymatic method to quantify the cholesterol concentration. The weight and production of eggs was significantly modified by the supplementation with retinyl in the birds. The results showed a gradual increase in the incorporation of retinyl in the egg yolk as a response to the supplementation, reaching values 384% higher than the control values. By the end of the supplementations a significant reduction in the concentrations of retinyl in the eggs yolk was observed. The most lasting supplementations were with 8,000 IU and 16,000 IU which lasted for three weeks. The cholesterol content in eggs was not significantly modified. The consumption of one egg enriched with 16000UI of retinol palmitate in the present study, by day, would probably reach 10 and 7,3% of the daily recommendations of this micronutrient for children of 1 to 3 years of age, and for 4 to 8 years, respectively. The nutritional value of eggs, related to the vitamin A, can be improved by supplementation of quails

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The ionic nitriding process presents some limitations related with the control of the thickness of the layer and its uniformity. Those limitations that happen during the process, are produced due to edge effects, damage caused by arcing arc and hollow cathode, mainly in pieces with complex geometry and under pressures in excess of 1 mbar. A new technique, denominated ASPN (active screen shapes nitriding) it has been used as alternative, for offering many advantages with respect to dc plasma conventional. The developed system presents a configuration in that the samples treated are surrounded by a large metal screen at high voltage cathodic potencials, (varying between 0 and 1200V) and currents up to 1 A. The sample is placed in floting potential or polarized at relatively lower bias voltages by an auxiliary source. As the plasma is not formed directly in the sample surface but in the metal screen, the mentioned effects are eliminated. This mechanism allows investigate ion of the transfer of nitrogen to the substrate. Optical and electronic microscopy are used to exam morphology and structure at the layer. X-ray difration for phase identification and microhardness to evaluate the efficiency of this process with respect to dc conventional nitriding

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Epoxy based nanocomposites with 1 wt % and 3 wt % of nanographite were processed by high shear mixing. The nanographite was obtained by chemical (acid intercalation), thermal (microwave expansion) and mechanical (ultrasonic exfoliation) treatments. The mechanical, electrical and thermal behavior of the nanocomposites was determined and evaluated as a function of the percentage of reinforcement. According to the experimental results, the electrical conductivity of epoxy was not altered by the addition of nanographite in the contents evaluated. However, based on the mechanical tests, nanocomposites with addition of 1 wt.% and 3 wt.% of nanographite showed increase in tensile strength of 16,62 % and 3,20 %, respectively, compared to the neat polymer. The smaller increase in mechanical strength of the nanocomposite with 3 wt.% of nanographite was related to the formation of agglomerates. The addition of 1 wt.% and 3 wt.% of nanographite also resulted in a decrease of 6,25 % and 17,60 %, respectively, in the relative density of the material. Thus, the specific strength of the nanocomposites was approximately 33,33 % greater when compared to the neat polymer. The addition of 1 wt.% and 3 wt.% of nanographite in the material increased the mean values of thermal conductivity in 28,33 % and 132,62 %, respectively, combined with a reduction of 26,11 % and 49,80 % in volumetric thermal capacity, respectively. In summary, it has been determined that an addition of nanographite of the order of 1 wt.% and 3 wt.% produced notable elevations in specific strength and thermal conductivity of epoxy

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Chitosan is being studied for use as dressing due their biological properties. Aiming to expand the use in biomedical applications, chitosan membranes were modified by plasma using the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen (H2). The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, surface energy and water absorption test. Biological Tests were also performed, such as: test sterilization and proliferation of fibroblasts (3T3 line). Through SEM we observed morphological changes occurring during the plasma treatment, the formation of micro and nano-sized valleys. MFA was used to analyze different roughness parameters (Ra, Rp, Rz) and surface topography. It was found that the treated samples had an increase in surface roughness and sharp peaks. Methane plasma treatment decreased the hydrophilicity of the membranes and also the rate of water absorption, while the other treatments turned the membranes hydrophilic. The sterilization was effective in all treatment times with the following gases: Ar, N2 and H2. With respect to proliferation, all treatments showed an improvement in cell proliferation increased in a range 150% to 250% compared to untreated membrane. The highlights were the treatments with Ar 60 min, O2 60 min, CH4 15 min. Observing the results of the analyzes performed in this study, it appears that there is no single parameter that influences cell proliferation, but rather a set of ideal conditions that favor cell proliferation

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fuel cells are considered one of the most promising ways of converting electrical energy due to its high yield and by using hydrogen (as fuel) which is considered one of the most important source of clean energy for the future. Rare earths doped ceria has been widely investigated as an alternative material for the electrolyte of solid oxide fuel cells (SOFCs) due to its high ionic conductivity at low operating temperatures compared with the traditional electrolytes based on stabilized zirconia. This work investigates the effect of gallium oxide (Gallia) as a sintering aid in Eu doped ceria ceramic electrolytes since this effect has already been investigated for Gd, Sm and Y doped ceria electrolytes. The desired goal with the use of a sintering aid is to reduce the sintering temperature aiming to produce dense ceramics. In this study we investigated the effects on densification, microstructure and ionic conduction caused by different molar fraction of the dopants europium (10, 15 and 20%) and gallium oxide (0.3, 0.6 and 0.9%) in samples sintered at 1300, 1350 and 1450 0 C. Samaria (10 and 20%) doped ceria samples sintered between 1350 and 1450 °C were used as reference. Samples were synthesized using the cation complexation method. The ceramics powders were characterized by XRF, XRD and SEM, while the sintered samples were investigated by its relative density, SEM and impedance spectroscopy. It was showed that gallia contents up to 0.6% act as excellent sintering aids in Eu doped ceria. Above this aid content, gallia addition does not promote significant increase in density of the ceramics. In Ga free samples the larger densification were accomplished with Eu 15% molar, effect expressed in the microstructure with higher grain growth although reduced and surrounded by many open pores. Relative densities greater than 95 % were obtained by sintering between 1300 and 1350 °C against the usual range 1500 - 1600 0 C. Samples containing 10% of Sm and 0.9% of Ga reached 96% of theoretical density by sintering at 1350 0 C for 3h, a gain compared to 97% achieved with 20% of Sm and 1% of Ga co-doped cerias sintered at 1450 0 C for 24 h as described in the literature. It is found that the addition of gallia in the Eu doped ceria has a positive effect on the grain conductivity and a negative one in the grain boundary conductivity resulting in a small decrease in the total conductivity which will not compromise its application as sintering aids in ceria based electrolytes. Typical total conductivity values at 600 and 700 °C, around 10 and 30 mS.cm -1 respectively were reached in this study. Samples with 15% of Eu and 0.9 % of Ga sintered at 1300 and 1350 °C showed relative densities greater than 96% and total conductivity (measured at 700 °C) between 20 and 33 mS.cm -1 . The simultaneous sintering of the electrolyte with the anode is one of the goals of research in materials for SOFCs. The results obtained in this study suggest that dense Eu and Ga co-doped ceria electrolytes with good ionic conductivity can be sintered simultaneously with the anode at temperatures below 1350 °C, the usual temperature for firing porous anode materials

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This research was motivated by the requirement of asbestos s replacement in building systems and the need to generate jobs and income in the country side of the state of Bahia, Brazil. The project aimed at using fibers from licuri leaves (syagrus coronata), an abundant palm in the region, to produce composites appropriate for the sustainable production of cement fibre reinforced products in small plants. The composites were produced in laboratory using Portland cement CP-II-F32, sand, water, licuri palm fiber contents of 1.0, 1.5 and 2.0% by weight of binder (two different fiber length) and metakaolin. The latter was chosen as an additional binder for its efficiency to reduce the alkalinity of cementitious matrixes therefore preventing the degradation of vegetable fibers. The characterization of the composite components was carried out by sieving and laser particle size analyses, thermal analysis, fluorescence and X-ray diffraction. The composites performance was evaluated by 3- point-bending tests, compressive strength, ultrasound module of elasticity, free and restrained shrinkage, water capillarity absorption and apparent specific gravity. It has been found that the addition of fibers increased the time to onset of cracking over 200.00% and a 25% reduction in cracks opening in the restrained shrinkage test. The capillary absorption reduced about 25% when compared to fiber-free composites. It was also observed with regard to flexural strength, compressive strength and specific gravity, that the addiction of fibers did not affect the composite performance presenting similar results for compounds with and without fibers. In general it can be stated that the reinforced composite fibers of palm licuri presents physical and mechanical characteristics which enable them to be used in the intended proposals of this research