Desenvolvimento e caracterização de nanocompósito de resina epóxi com nanopartículas de sílica para revestimento de dutos para transporte de petróleo

The use of polymer based coatings is a promising approach to reduce the corrosion problem in carbon steel pipes used for the transport of oil and gas in the oil industry. However, conventional polymer coatings offer limited properties, which often cannot meet design requirements for this type of application, particularly in regard to use temperature and wear resistance. Polymer nanocomposites are known to exhibit superior properties and, therefore, offer great potential for this type of application. Nevertheless, the degree of enhancement of a particular property is greatly dependent upon the matrix/nanoparticle material system used, the matrix/nanoparticle interfacial bonding and also the state of dispersion of the nanoparticle in the polymer matrix. The objective of the present research is to develop and characterize polymer based nanocomposites to be used as coatings in metallic pipelines for the transportation of oil and natural gas. Epoxy/SiO2 nanocomposites with nanoparticle contents of 2, 4, and 8 wt % were processed using a high-energy mill. Modifications of the SiO2 nanoparticles‟ surfaces with two different silane agents were carried out and their effect on the material properties were investigated. The state of dispersion of the materials processed was studied using Scanning and Transmission Electron Microscopy (SEM and TEM) micrographs. Thermogravimetric analysis (TG) were also conducted to determine the thermal stability of the nanocomposites. In addition, the processed nanocomposites were characterized by dynamic mechanical analysis (DMA) to investigate the effect of nanoparticles content and silane treatment on the viscoelastic properties and on the glass transition temperature. Finally, wear tests of the pin-on-disc type were carried out to determine the effects of the nanoparticles and the silane treatments studied. According to the results, the addition of SiO2 nanoparticles treated with silane increased the thermal stability, the storage modulus and Tg of the epoxy resin and decreased wear rate. This confirms that the interaction between the nanoparticles and the polymer chains plays a critical role on the properties of the nanocomposites

Análise sobre diferentes abordagens de configuração eletrônica de elementos apresentados em livros de química

This study aimed to identify and review of the conceptual differences presented by authors of books, focusing on the theme of electronic configuration. It shows the changing concepts of electronic configuration, its implications for the cognitive development of students and their relations with the contemporary world. We identified possible obstacles in books generated in the search for simplifications, situations of different concepts of energy in the electron configuration for sublevels. For this analysis was carried out in several books, and some other general chemistry and inorganic chemistry without distinguishing between level of education, whether secondary or higher. It was found that some books for school books corroborated with higher education, others do not. To check the consistency of what was discussed, it was a survey of 30 teachers, it was found divergent points of responses, particularly with respect to the energy sublevels and authorship of the diagram which facilitated the electron configuration. It was found that the total 22professores, ie, 73,33% answered correctly on the energy sublevel more calcium (Ca) and 80%, ie, 24 teachers responded incorrectly on the iron. As for the authorship of the diagram used to facilitate the electronic configuration, we obtained 93, 33% of teachers indicated that they followed a diagram, and this was called "Diagram of Linus Pauling," teacher 01, 3,33%, indicated that the diagram was authored by Madelung and 01, 3,33%, did not respond to question. Was observed that it is necessary a more detailed assessment of ancient writings, as the search for simplifications and generalizations, not so plausible, lead to errors and consequences negative for understanding the properties of many substances. It was found that quantum mechanics combined with spectroscopic data should be part of a more thorough analysis, especially when it extends situations atoms monoelectronicpolieletrônicos to describe atoms, because factors such as effective nuclear charge and shielding factor must be taken into consideration, because interactions there is inside an atom, described by a set ofquantum numbers, sometimes not taken into account

Estudo das ligas titânio-zircônio resultantes do processo de fundição plasma-skull para aplicações como biomateriais

The aim of this work was to study a series of 11 different compositions of Ti-Zr binary alloys resistance to aggressive environment, i. e., their ability to keep their surface properties and mass when exposed to them as a way to evaluate their performance as biomaterials. The first stage was devoted to the fabrication of tablets from these alloys by Plasma-Skull casting method using a Discovery Plasma machine from EDG Equipamentos, Brazil. In a second stage, the chemical composition of each produced tablet was verified. In a third stage, the specimen were submitted to: as-cast microstructure analysis via optical and scanning electron microscopy (OM and SEM), x-ray dispersive system (EDS) chemical analysis via SEM, Vickers hardness tests for mechanical evaluation and corrosion resistence tests in a 0.9% NaCl solution to simulate exposition to human saliva monitored by open circuit potential and polarization curves. From the obtained results, it was possible to infer that specimens A1 (94,07 wt% Ti and 5,93% wt% Zr), A4 (77,81 wt % Ti and 22,19 wt % Zr) and A8 (27,83 wt% Ti and 72,17 wt% Zr), presented best performance regarding to corrosion resistance, homogeneity and hardness which are necessary issues for biomaterials to be applied as orthopedic and odontological prosthesis

Conducão eletrônica e propriedades termodinâmicas da molécula de DNA

In this thesis, we study the thermo-electronic properties of the DNA molecule. For this purpose, we used three types of models with the DNA, all assuming a at geometry (2D), each built by a sequence of quasiperiodic (Fibonacci and / or Rudin-Shapiro) and a sequence of natural DNA, part of the human chromosome Ch22. The first two models have two types of components that are the nitrogenous bases (guanine G, cytosine C, adenine A and thymine T) and a cluster sugar-phosphate (SP), while the third has only the nitrogenous bases. In the first model we calculate the density of states using the formalism of Dyson and transmittance for the time independent Schr odinger equation . In the second model we used the renormalizationprocedure for the profile of the transmittance and consequently the I (current) versus V (voltage). In the third model we calculate the density of states formalism by Dean and used the results together with the Fermi-Dirac statistics for the chemical potential and the quantum specific heat. Finally, we compare the physical properties found for the quasi-periodic sequences and those that use a portion of the genomic DNA sequence (Ch22).

Extrafiscalidade: análise da norma potiguar regulamentadora do imposto sobre propriedade veicular automotora à luz da tutela ambiental

From the second half of the twentieth century the state bega n to use exaction beyond your fiscalist character, also as a means of alignment deformities economic and social balance, influencing in different directions, according to economic, social and political policy. It is what is usually called the extrafiscalit y. It is in light of this phenomenon and the constitutional perspective, the present work aims to analyze item IV of article. 8 of Law n. 6.967/96, regulatory Property Tax Vehicle Automotive (property taxes) in the State of Rio Grande do Norte, in view of its possible incompatibility with the principles of the Basic Statute and with international guidelines for protection of the environment The problem of this research is Seated in art. 225 of the Constitution, which provides that everyone has the right to an ecologically balanced environment. From the reading of this standard, extracted it is the responsibility of the state protecting the environment, which requires the adoption of suitable actions to that end. However, we look to state law cited follows th e constitutional path, since it exempts the collection of property taxes automotive vehicles with over 10 years of manufacturing, which could encourage the conservation of a fleet of old vehicles, mostly more polluting and harmful to the environment and hu man health. Would the state legislature oblivious to the constitutional principles and the global trend of environmental preservation? Thus questions whether such an incentive for more polluting vehicles, emitting more gases in the atmosphere. Moreover, th e international community is already moving through important conventions in an attempt to minimize and control global warming and climate change. Predicting the theme in CF/88 demonstrates that the country is no stranger to the issue. Thus, the work is a retelling of Law No. 6.967/96 order to check whether it is compatible with the existing system. The methodology consists of a documentary, deductive, dialectical literature. At the end of the survey, it was found that provide a tax benefit to these vehicle s is encouraged to maintain them in circulation and contribute to the increase in air and noise pollution, in addition to the traffic problems generated. Thus, this potiguar anything standard can be expressed extrafiscality because the medium and long term there is encouragement and worsening environmental problem. Despite the ability to pay clause, but this remission is an affront to legally protected interests. Thus, this device goes in reverse order compared to the values of the legal system and in relat ion to sustainable development. Modern Tax Law should be used as a tool to achieve the purposes collimated by the State, and not otherwise. It was noticed that the vast majority of Brazilian states does not follow this rule, including Mato Grosso and Minas Gerais have no such exemption. Therefore, the RN State does not constitute a model for sustainable public policies, nor example of environmental protection by state law.

Tratamento de argila montmorilonítica para a produção de nanocompósitos poliméricos com retardo de propagação de chama

Compared to conventional composites, polymer matrix nanocomposites typically exhibit enhanced properties at a significantly lower filler volume fraction. Studies published in the literature indicate t hat the addition of nanosilicate s can increase the resistance to flame propagation in polymers. In this work, a treatment of montmorillonite (MMT) nano clay and the effect of its ad dition o n flame propagation characteristics of vinyl ester were studied. The resea rch was conducted in two stages. The first stage focused on the purification and activation of the MMT clay collected from a natural deposit to improve compatibility with the polymer matrix . Clay modification with sodium acetate was also studied to improve particle dispersion in the polymer. The second step was focused on the effect of the addition of the treated clay on nanocomposites ’ properties. Nanocomposites with clay con tents of 1, 2, 4 wt. % were processed. T he techniques for the characterization of the clay included X - ray fluorescence (XRF), X - r ay d iffraction (XRD), thermogravimetric a nalysis (TGA), d ifferential scanning c alorimetry (DSC) , s urface area (BET) and Fourier transform infrared spectroscopy (FTIR). For t he characterization of the nanocomposites , the techniques used were thermogravimetric a nalysis (TGA) , differential scanning c alorimetry (DSC), Fourier transform infrared spectroscopy (FTIR) , scanning electron mi croscopy (SEM), transmission electron m icroscopy (TEM), and the determination of tensile strength, modulus of elasticity and resistance to flame propagation. According to the results, the purification and activation treatment with freeze - drying used in thi s work for the montmorillonite clay was efficient to promote compatibility and dispersion in the polymer matrix as evidenced by the characterization of the nanocomposite s . It was also observed that the clay modifica tion using sodium acetate did not produce any significant effect to improve compatibilization of the clay with the polymer. The addition of the treated MMT resulted in a reduction of up to 53% in the polymer flame propagation speed and did not affect the mechanical tensile strength and modulus o f elas ticity of the polymer, indicating compatibility between the clay and polymer. The effectiveness in reducing flame propagation speed peaked for nanocomposites with 2 wt. % clay, indicating that this is the optimum clay concentration for this property. T he clay treatment used in this work enables the production of vinylester matrix nanocomposites with flame - retardancy properties .

Vigilância eletrônica e cibercultura: reflexões sobre a visibilidade na era da informação

CARDOSO, M. F. ; RAMOS, A. S. M. . Vigilância eletrônica e cibercultura: reflexões sobre a visibilidade na era da informação. Revista Espaço Acadêmico (UEM) , JCR, v. 10, p. 150-158, 2010.

Desenvolvimento de coleções de fontes de informação eletrônica em bibliotecas universárias

O contexto hodierno caracteriza-se como um panorama de uso contínuo de informação nas mais variadas esferas da sociedade. A informação é usada em diversos contextos sob vários formatos e isso se torna possível com a evolução tecnológica realizada em ritmo acelerado, sobretudo nos últimos dois séculos. Essa evolução trouxe consigo a possibilidade ampliada de acesso à informação, mas por outro lado, impôs desafios circunstanciais no seu tratamento e difusão. Nos diversos tipos de unidades de informação, faz-se necessária a adoção de estratégias para a melhoria do gerenciamento e desenvolvimento das coleções, sobretudo as coleções digitais. De tal modo, o trabalho visa a traçar um panorama ligado às questões relacionadas à comunicação cientifica com a bibliotecas universitárias, com vistas a ampliar o debate sobre o desenvolvimento digital de coleções de periódicos em bibliotecas universitárias, bem como aspectos relacionados à adoção de critérios de seleção e avaliação destes itens de informação. Aborda os casos específicos, como o do Portal Capes e o SciELO como coleções digitais de periódicos sujeitos a estratégias de desenvolvimento das coleções. Aponta opções para a melhoria da gestão da coleção digital em bibliotecas universitárias. A metodologia empregada foi a de pesquisa bibliográfica em uso de fontes eletrônicas e convencionais, bem como análise de critérios utilizados na Avaliação e Coleções para Bibliotecas Universitárias e o Indicadores Qualis pela Condenação de Aperfeiçoamento de Pessoa de Ensino Superior (CAPES).

Os impactos tecnológicos da implantação da nota fiscal eletrônica: um estudo de casos múltiplos

Increasingly, the Information Technology is used in the society, including the private, public and third sector organizational context. Technological tools are created in order to speed, automate, control and monitor processes. These technologies generate impacts on areas that permeate their use and the objective of this study is to investigate the implementation process of the Eletronic Invoice and the impacts arising from this technological tool in companies. For that, case studies have been conducted in three companies that emit and receive Eletronic Invoice, in a Information System consultancy, that provides softwares of Eletronic Invoice, and in a State Tax Department. Data collection was performed with organizations representatives through electronic questionnaires. The study concludes that it is expected, by the investigated organizations, that the tool reaches the benefits offered by the Tax Administration. However, these benefits have not been identified yet and neither have the use of methodologies in order to identify them. Moreover, the main impact found was the need for better training and participant´s technical qualification, followed by reducing printing costs and paper purchase

Vigilância eletrônica no trabalho bancário: do controle consentido ao totalitarismo corporativo

This dissertation addresses the electronic surveillance theme in the banking context. The research that originated it, which was held in an organization called for the fiction name Banco Total, started from the following driving question: How do workers at a bank perceive electronic surveillance at their process of work? The research s main objective was to comprehend how workers perceive electronic surveillance at their process of work. The study adopted an interdisciplinary perspective, having Management as the original field, establishing a dialogue with others disciplines, like Philosophy and Sociology. About its methodology, it s a qualitative research that addressed its object in oral (interviews with live history elements) way. . Ten individuals were interviewed. The analytical process utilized the hermeneutical-dialectics technique.. From the analyses (hermeneutics) of the data, the following themes have emerged: (i) Acquiescence ; (ii) Monitoring; (iii) Time and Motion; (iv) Fear; (v) Interdiction; and (vi) Resistance . From the discussion (dialectic) of the results, this work presents three synthetic propositions that culminate in the following dimensions (i) control; (ii) acquiescence; (iii) corporative totalitarianism. It can be concluded that electronic surveillance is one mechanism of control emerged from the apply of technology at Total Bank; that information technology has been improving the control mechanisms of management theories; and that the imbrications between management and material technology control mechanisms at a context where there is acquiescence by workers contribute for the emergency of corporative totalitarianism components

Estudo sobre o efeito dos parâmetros de processamento dos pós e sinterização do aço inox 316l reforçado com NbC

This masther dissertation presents a contribution to the study of 316L stainless steel sintering aiming to study their behavior in the milling process and the effect of isotherm temperature on the microstructure and mechanical properties. The 316L stainless steel is a widely used alloy for their high corrosion resistance property. However its application is limited by the low wear resistance consequence of its low hardness. In previous work we analyzed the effect of sintering additives as NbC and TaC. This study aims at deepening the understanding of sintering, analyzing the effect of grinding on particle size and microstructure and the effect of heating rate and soaking time on the sintered microstructure and on their microhardness. Were milled 316L powders with NbC at 1, 5 and 24 hours respectively. Particulates were characterized by SEM and . Cylindrical samples height and diameter of 5.0 mm were compacted at 700 MPa. The sintering conditions were: heating rate 5, 10 and 15◦C/min, temperature 1000, 1100, 1200, 1290 and 1300◦C, and soaking times of 30 and 60min. The cooling rate was maintained at 25◦C/min. All samples were sintered in a vacuum furnace. The sintered microstructure were characterized by optical and electron microscopy as well as density and microhardness. It was observed that the milling process has an influence on sintering, as well as temperature. The major effect was caused by firing temperature, followed by the grinding and heating rate. In this case, the highest rates correspond to higher sintering.

Desenvolvimento e caracterização de um compósito matriz metálica (CMM): aço EUROFER97 reforçado com Carbeto de Tântalo - TaC

Steel is an alloy EUROFER promising for use in nuclear reactors, or in applications where the material is subjected to temperatures up to 550 ° C due to their lower creep resistance under. One way to increase this property, so that the steel work at higher temperatures it is necessary to prevent sliding of its grain boundaries. Factors that influence this slip contours are the morphology of the grains, the angle and speed of the grain boundaries. This speed can be decreased in the presence of a dispersed phase in the material, provided it is fine and homogeneously distributed. In this context, this paper presents the development of a new material metal matrix composite (MMC) which has as starting materials as stainless steel EUROFER 97, and two different kinds of tantalum carbide - TaC, one with average crystallite sizes 13.78 nm synthesized in UFRN and another with 40.66 nm supplied by Aldrich. In order to improve the mechanical properties of metal matrix was added by powder metallurgy, nano-sized particles of the two types of TaC. This paper discusses the effect of dispersion of carbides in the microstructure of sintered parts. Pure steel powders with the addition of 3% TaC UFRN and 3% TaC commercial respectively, were ground in grinding times following: a) 5 hours in the planetary mill for all post b) 8 hours of grinding in the mill Planetary only for steel TaC powders of commercial and c) 24 hours in the conventional ball mill mixing the pure steel milled for 5 hours in the planetary mill with 3% TaC commercial. Each of the resulting particulate samples were cold compacted under a uniaxial pressure of 600MPa, on a cylindrical matrix of 5 mm diameter. Subsequently, the compressed were sintered in a vacuum furnace at temperatures of 1150 to 1250 ° C with an increment of 20 ° C and 10 ° C per minute and maintained at these isotherms for 30, 60 and 120 minutes and cooled to room temperature. The distribution, size and dispersion of steel and composite particles were determined by x-ray diffraction, scanning electron microscopy followed by chemical analysis (EDS). The structures of the sintered bodies were observed by optical microscopy and scanning electron accompanied by EDS beyond the x-ray diffraction. Initial studies sintering the obtained steel EUROFER 97 a positive reply in relation to improvement of the mechanical properties independent of the processing, because it is obtained with sintered microhardness values close to and even greater than 100% of the value obtained for the HV 333.2 pure steel as received in the form of a bar

Propriedade fotoluminescente da ZrO2: Tb+3, Eu+3, Tm+3 obtida pelo método de polimerização de complexos

Recent studies are investigating a new class of inorganic materials which arise as a promising option for high performance applications in the field of photoluminescence. Highlight for rare earth (TR +3 ) doped, which have a high luminous efficiency, long decay time and being able to emit radiation in the visible range, specific to each element. In this study, we synthesized ZrO2: Tb +3 , Eu +3 , Tm +3 nanoparticles complex polymerization method (CPM). We investigated the influences caused by the heat treatment temperature and the content of dopants in zirconia photoluminescent behavior. The particles were calcined at temperature of 400, 500 and 600 ° C for two hours and ranged in concentration of dopants 1, 2, 4 and 8 mol% TR +3 . The samples were characterized by thermal analysis, X-ray diffraction, photoluminescence of measurements and uv-visible of spectroscopies. The results of X-ray diffraction confirmed the formation of the tetragonal and cubic phases in accordance with the content of dopants. The photoluminescence spectra show emission in the region corresponding simultaneous to blue (450 nm), green (550 nm) and red (615 nm). According to the results, ZrO2 particles co-doped with rare earth ions is a promising material white emission with a potential application in the field of photoluminescence