32 resultados para Portable architecture. Reassemblable structure. Design process


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work aims to analyze and evaluate the Urban furniture designed to public areas according to the Revitalization planning for Rio Grande do Norte coastland, defining visual relations among urban elements in the landscape of revitalized public urban areas with cultural, paisagistic and touristic values and the design process used for developing urban furniture to those areas, observing the incoming consequences use to that process in a specific urban context which alters use, functions, cultural images as well as social values attributed to each particular place. Environmental perceptions, legibility of local cultural references and their representation through the design of urban elements, act in a positive or negative manner over the inhabitants cognition process of some particular revitalized area, determining new use and attributions to those areas. Designs for coastal urban interventions try excessively to standardize technical media, construction materials and planning configurations, creating artificial sceneries that segregates users, imposing new structures and usage, generating, consequently, the so called non-places and burlesque regionalism. The research is divided into 4 chapters: 1) Theoretical support (Industrial design; Urban furniture; Public urban spaces; Urban image and environmental perception; Urban occupation and interventions in coastland areas); 2) Methodological procedures and data collection; 3) Analysis of Rio Grande do Norte coastal areas and their urban interventions; 4) Final considerations and Industrial Design contributions to the subject

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This collaborative research is a qualitative approach, from historical and cultural perspective, made about a teacher of third grade of basic education in the area of history, in the municipality of Caicó / RN. It has as objective to investigate, in a collaborative action, if the design process of teaching and learning the discipline of history based on the relationship before / after allows the development of critical reflective thinking of the teacher in school practices. The theoretical and methodological approaches are supported in the postulates of Vygotsky (1998), Rubinstein (1973) and Linblinskaia (1979), among others, whose understanding has led us to reflect if the teacher develops the reflective critical-thinking in history discipline classes. The complexity of the study led us to an analysis exercise, using different methodological procedures, such as: bibliographic review of the literature, considering also the literature of the history area, interviews, observation in the classroom, video recordings and reflective sessions, enabling clarify the construction and reconstruction of thought that the teacher had been developing during the process of teaching and learning. The test results point to a dichotomy between theory and practice, and also to a certain fragility in the position of professor in teaching and learning the discipline of history, at the third grade of basic education. The teacher recognizes that she requires a theoretical deepening with more intensity, as a process of continuous training to improve the practice of teaching in history school, though, stating in her speech that her teaching practice is based on critical reflection. However, she presents serious limitations in classroom practices. We conclude that, although she has shown willing to work on a critical perspective of reality, showed also poor change at school practices, starting to reflect about her own actions, pointing her limits and the changes needed that didn t become reality yet. It s necessary a formative process for her. The study therefore showed that even with the sessions and reflective of deepening theoretical studies, the teacher does not change its profile, while maintaining its traditional vision in any pedagogical action. This research recommends the formation of school groups for further studies and discussion on the practices of education in history area from a reflective-critical thought perspective as a mean of personal and professional development

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tuberculosis (TB) is one of the most important health problems being faced worldwide. In Brazil, the responsibility for the actions of to diagnosis and control of this disease was transferred to the municipalities within the Primary Health Care (PHC), aiming at improvement in epidemiological indicators, requiring reorientation of the practice of family health teams and requiring methodologies to analyze the extent to which components of the PHC are being achieved. Thus, this study aims to analyze the performance of primary care services in the city of Natal-RN for the diagnosis and control of TB, from the perspective of health professionals (doctors and nurses). The study is descriptive, cross-sectional and quantitative. Data collection was conducted from March to July 2011 and involved 121 health professionals working in 52 health units (family health unit, basic health unit and mixed units). The instrument is structured based on the Primary Care Assessment Tool (PCAT), validated and adapted to assess attention to TB in Brazil, and includes questions regarding the Structure and Process components of health services. For quantitative analysis, it was constructed indicators, whose response patterns are followed according to the Likert scale between one and five, which meant the degree of preference relation (or agreement) of the claims. Values between 1 and 3 were considered unsatisfactory for the indicator, between 3 and less than 4, regular, and between 4 and 5, satisfactory. With regard to inputs and equipment, the units had satisfactory condition for form (  = 4.26), consultation (  = 4.02) and basic basket (  = 4.24); regular condition to pot (  = 3.56) and unsatisfactory conditions for transportation tickets (  = 1.50) and sputum smear microscopy (  = 2.42) and X-rays (  = 1.07). In relation to actions, there was satisfactory development for those focused on the individual patient. Actions aimed at the collective level, as the search for respiratory symptoms (RS), monitoring of contacts and guidelines for the community ranged from regular to unsatisfactory (  = 3.16 -  = 1.34). With regard to training, 94,2% received training to identify RS. As regards the time for diagnosis, the median time elapsed between the identification of RS and the beginning of treatment it was 22 days. In relation to the difficulties faced by professionals in the diagnosis of TB, 56,2% reported that they are related only to health services, especially for the failure in the rearguard laboratory and in the specialized services reference, the lack of human and material resources and low performing an active search. The professionals perceive the performance of diagnosis and control of TB, permeated with limitations and barriers to organizational and operational character of various sizes, emerging the need for effective coordination of various sectors and key stakeholders of TB care, to adoption of a new intersectoral strategies that aim to increase the responsiveness of the PHC, providing the best performance in service delivery to the user, family and community, and ensuring effective action and resolving the needs of this population group.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Hospital Automation is an area that is constantly growing. The emergency of new technologies and hardware is transforming the processes more efficient. Nevertheless, some of the hospital processes are still being performed manually, such as monitoring of patients that is considered critical because it involves human lives. One of the factors that should be taken into account during a monitoring is the agility to detect any abnormality in vital signs of patients, as well as warning of this anomaly to the medical team involved. So, this master's thesis aims to develop an architecture to automate this process of monitoring and reporting of possible alert to a professional, so that emergency care can be done effectively. The computing mobile was used to improve the communication by distributing messages between a central located into the hospital and the mobile carried by the duty

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The recent astronomical observations indicate that the universe has null spatial curvature, is accelerating and its matter-energy content is composed by circa 30% of matter (baryons + dark matter) and 70% of dark energy, a relativistic component with negative pressure. However, in order to built more realistic models it is necessary to consider the evolution of small density perturbations for explaining the richness of observed structures in the scale of galaxies and clusters of galaxies. The structure formation process was pioneering described by Press and Schechter (PS) in 1974, by means of the galaxy cluster mass function. The PS formalism establishes a Gaussian distribution for the primordial density perturbation field. Besides a serious normalization problem, such an approach does not explain the recent cluster X-ray data, and it is also in disagreement with the most up-to-date computational simulations. In this thesis, we discuss several applications of the nonextensive q-statistics (non-Gaussian), proposed in 1988 by C. Tsallis, with special emphasis in the cosmological process of the large structure formation. Initially, we investigate the statistics of the primordial fluctuation field of the density contrast, since the most recent data from the Wilkinson Microwave Anisotropy Probe (WMAP) indicates a deviation from gaussianity. We assume that such deviations may be described by the nonextensive statistics, because it reduces to the Gaussian distribution in the limit of the free parameter q = 1, thereby allowing a direct comparison with the standard theory. We study its application for a galaxy cluster catalog based on the ROSAT All-Sky Survey (hereafter HIFLUGCS). We conclude that the standard Gaussian model applied to HIFLUGCS does not agree with the most recent data independently obtained by WMAP. Using the nonextensive statistics, we obtain values much more aligned with WMAP results. We also demonstrate that the Burr distribution corrects the normalization problem. The cluster mass function formalism was also investigated in the presence of the dark energy. In this case, constraints over several cosmic parameters was also obtained. The nonextensive statistics was implemented yet in 2 distinct problems: (i) the plasma probe and (ii) in the Bremsstrahlung radiation description (the primary radiation from X-ray clusters); a problem of considerable interest in astrophysics. In another line of development, by using supernova data and the gas mass fraction from galaxy clusters, we discuss a redshift variation of the equation of state parameter, by considering two distinct expansions. An interesting aspect of this work is that the results do not need a prior in the mass parameter, as usually occurs in analyzes involving only supernovae data.Finally, we obtain a new estimate of the Hubble parameter, through a joint analysis involving the Sunyaev-Zeldovich effect (SZE), the X-ray data from galaxy clusters and the baryon acoustic oscillations. We show that the degeneracy of the observational data with respect to the mass parameter is broken when the signature of the baryon acoustic oscillations as given by the Sloan Digital Sky Survey (SDSS) catalog is considered. Our analysis, based on the SZE/X-ray data for a sample of 25 galaxy clusters with triaxial morphology, yields a Hubble parameter in good agreement with the independent studies, provided by the Hubble Space Telescope project and the recent estimates of the WMAP

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The way to deal with information assets means nowadays the main factor not only for the success but also for keeping the companies in the global world. The number of information security incidents has grown for the last years. The establishment of information security policies that search to keep the security requirements of assets in the desired degrees is the major priority for the companies. This dissertation suggests a unified process for elaboration, maintenance and development of information security policies, the Processo Unificado para Políticas de Segurança da Informação - PUPSI. The elaboration of this proposal started with the construction of a structure of knowledge based on documents and official rules, published in the last two decades, about security policies and information security. It's a model based on the examined documents which defines the needed security policies to be established in the organization, its work flow and identifies the sequence of hierarchy among them. It's also made a model of the entities participating in the process. Being the problem treated by the model so complex, which involves all security policies that the company must have. PUPSI has an interative and developing approach. This approach was obtained from the instantiation of the RUP - Rational Unified Process model. RUP is a platform for software development object oriented, of Rational Software (IBM group). Which uses the best practice known by the market. PUPSI got from RUP a structure of process that offers functionality, diffusion capacity and comprehension, performance and agility for the process adjustment, offering yet capacity of adjustment to technological and structural charges of the market and the company

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work describes the design process of a small recreational gated community in Pium, Nísia Floresta/RN, from concept to final design stages, with emphasis on low environmental impact, thermal comfort and the spatial quality of housing. The process consisted in a review of the literature and relevant standards, studies of design references and architectural programming. The project development was initially focused on the project’s feasibility, with the definition of the number of units, implantation, size and location of the dwellings and the common areas of the development. Two types of houses (four low rise and five duplex units) have been proposed in order to attend the premises of architectural programming. The conception of the architectural design began with the rooms’ zoning according to the lots. This resulted in the pre-selection of three alternatives that were evaluated in terms of spatial quality and environmental performance. The development of sketches focused on the envelope consistent with the bioclimatic guidelines and on the language of the compatible proposal with the lowest possible environmental impact of the building system, which resulted in the selection of the eucalyptus wood type. During the working drawings, the Quality Technical Regulation for the Level of Energy Efficiency Residential Buildings (RTQ -R) was adopted for the evaluation of the envelope, which resulted in "B" level of efficiency for the first case. After minor adjustments, mainly in frames, the efficiency level rose to "A", demonstrating that early project decisions contributed to the envelope energy performance. Besides the design of the two types of units, the final proposal of the gated community includes the design of the equipment for the common areas (entrance, multipurpose room and support and service sector), and the descriptive texts explaining the project and construction’s details.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

With the intention of studying and developing the design process based on a specific methodology, the object of this work is to present the design of a gated condominium community in Natal based on the application of principles of shape grammar, used in their design process. The shape grammar is a design method developed in the 1970s by George Stiny and James Gips. It is used for the analysis of the project as well as for its synthesis, with the goal of creating a "formal vocabulary" through mathematical and/or geometrical operations. Here, the methodology was used in the synthesis of the design process, through the relationship between formal subtractions and the houses’ architectural planning. As a result, five dwellings configurations were proposed, each one different from the other with respect to their shape and architectural programming, distributed in three twin groups, which are repeated until the final total of nine architectural volumes. In addition to studies of the condominium’s ventilation and the buildings’ shading simulations, studies of spatial flexibility and acoustic performance were also performed. The mapping of the design process, one of the specific objectives of the dissertation, was composed not only by the record of formal constraints (the preparation and application of rules), but also by physical, environmental, legal and sustainability aspects in relation to, on one hand, the optimization of the shading and passive ventilation for hot and humid climates, and, on the other hand, the modulation and rationalization of the construction.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This work consists of the integrated design process analyses with thermal energetic simulation during the early design stages, based on six practical cases. It aims to schematize the integration process, identifying the thermal energetic analyses contributions at each design phase and identifying the highest impact parameters on building performance. The simulations were run in the DesignBuilder energy tool, which has the same EnergyPlus engine, validated. This tool was chosen due to the flexible and user friendly graphic interface for modeling and output assessment, including the parametric simulation to compare design alternatives. The six case studies energy tools are three architectural and three retrofit projects, and the author the simulations as a consultant or as a designer. The case studies were selected based on the commitment of the designers in order to achieve performance goals, and their availability to share the process since the early pre-design analyses, allowing schematizing the whole process, and supporting the design decisions with quantifications, including energy targets. The thermoenergetic performance analyses integration is feasible since the early stages, except when only a short time is available to run the simulations. The simulation contributions are more important during the sketch and detail phases. The predesign phase can be assisted by means of reliable bioclimatic guidelines. It was verified that every case study had two dominant design variables on the general performance. These variables differ according the building characteristics and always coincide with the local bioclimatic strategies. The adaptation of alternatives to the design increases as earlier it occurs. The use of simulation is very useful: to prove and convince the architects; to quantify the cost benefits and payback period to the retrofit designer; and to the simulator confirm the desirable result and report the performance to the client

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Objective: Evaluate the work structure and process in Psychos ocial Care Centers (CAPS) and the professionals profile, the satisfaction, conditions and work overload. Methods: Cross - sectional study conducted in five CAPS in Campina Grande city. The study sample consisted of five coordinators, 42 graduate professional s, 26 mid - level (technical and auxiliary nurses, and caregivers), and the medical records pertaining to 413 users followed up. Data were collected using validated questionnaires (CAPSUL - rating CAPS in southern Brazil) and adapted to the study, between July and October 2014. The questionnaires were double entered and submitted to validation in the sub - program “Validate Epi Info 3.5.4” , used along with the “SPSS 17.0” for processing the statistical analyzes. Measures of central tendency and dispersion were ap plied to the descriptive analyzes; “Fisher's” exact test to check the CAPS impact on hospital admissions and the “Bonferroni” adjusted to verify the diagnoses according to sex. 5% significance level was adopted. The study was approved by the Ethics Committ ee of the Rio Grande do Norte Federal University (UFRN), protocol 719.435, of 05.30.2014. Results: From the structure analysis were identified contextual factors that influenced the work process of CAPS professionals, such as: deficiencies with regard to h uman resources; forms of health professionals employment and qualifications; temporary contract existence. As to process dimension, it was found that the home visits performance by health professionals shows to be ineffective, given its insufficiency and i rregularity, which can be explained by the high demand, reduced staff and transportation lack. It was low coverage of items inherent to Therapeutic Individual Project, as the income generation program, insertion at work and home visit. The reference and co unter reference flow are still not satisfactorily organized. There was statistically significant difference for the diagnosis, with a predominance of mood disorders related to stress among women and those related to alcohol and other drugs among men (p <0. 05). There was an association between the degree of health professionals satisfaction and working conditions, overload and factors related to the content and working conditions, the security measures, comfort and CAPS appearance, contact between the teams and users, families treatment by the teams, temporary employment relationship. Conclusion: The data collected indicate the need for the CAPS organization through increased investments in the sector in order to enhance the infrastructure as potentiating el ement of practices with a view to changing the care model for mental health proposed by the Psychiatric Reform. It is hoped therefore that this research will contribute to better planning in CAPS unit management, with another tool to improve the dimensions involving the structure and the professional work process and improve this mental health care model.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The architect materializes his ideas using architectural representations that acts differently during the design process, as instrument that expresses his creatives ideas, as communication between the designer and the client, or as project documentation for its execution (DURAND, 2003). In this paper, it’s been discussed the connexion between the architectural representations and the design process, in a professional context, focusing on representation as an aid to conception. The general aim is to understand the role of architectural representations in the design process by identifying ways of appropriation of their types and resources. The investigation was developed through the theoretical and conceptual studies about the mentioned themes, and the empirical and qualitative research, with architects from the state of Rio Grande do Norte, Brazil, which was developed in two stages: the first one, by filling an electronic form, and the second one, by case studies through execution of design exercises. The results of indirect research showed that the majority of architects and urbanists believes that the way it use the types and representation resources may interfere in design concept. And, after the completion of the case studies, was showed that, motivated by different design conditions, most designers has used the representations differently, which is reflected in different design conceptions.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The thesis presents the results of research that addresses the performance of selective horizontal partitioning to promote Fire Safety in Buildings - FSB. Horizontal partitioning is a passive protection measure, settable in the early stages of the design process and controlled by the architect. However, there is a frequent reconfiguration of the rooms in academic buildings to adjust them for the space demand. Thus, large classrooms could turn into two or more smaller rooms, for example. Regardless when the subdivision occurs in the design phase or during the occupation of the building, the regulations just ensures the compartimentation of the room if all fireguard devices are present in the room. Knowing the fire's first minutes are the most important for life protection, we defend the hypothesis that a kind of partitioning ignored by regulatory standards is able to favoring the building vacancy and occupants rescue, for promote the room’s smoke exhaust. The performance of the selective horizontal partitioning due different blend of openings for smoke outlet was simulated on CFD software. The results indicate that selective horizontal partitioning is able to promote an upper smoke free layer and delay the indoor temperature growth.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The thesis presents the results of research that addresses the performance of selective horizontal partitioning to promote Fire Safety in Buildings - FSB. Horizontal partitioning is a passive protection measure, settable in the early stages of the design process and controlled by the architect. However, there is a frequent reconfiguration of the rooms in academic buildings to adjust them for the space demand. Thus, large classrooms could turn into two or more smaller rooms, for example. Regardless when the subdivision occurs in the design phase or during the occupation of the building, the regulations just ensures the compartimentation of the room if all fireguard devices are present in the room. Knowing the fire's first minutes are the most important for life protection, we defend the hypothesis that a kind of partitioning ignored by regulatory standards is able to favoring the building vacancy and occupants rescue, for promote the room’s smoke exhaust. The performance of the selective horizontal partitioning due different blend of openings for smoke outlet was simulated on CFD software. The results indicate that selective horizontal partitioning is able to promote an upper smoke free layer and delay the indoor temperature growth.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Building design is an effective way to achieve HVAC energy consumption reduction. However, this potentiality is often neglected by architects due to the lack of references to support design decisions. This works intends to propose architectural design guidelines for energy efficiency and thermal performance of Campus/UFRN buildings. These guidelines are based on computer simulations results using the software DesignBuilder. The definition of simulation models has begun with envelope variables, partially done after a field study of thirteen buildings at UFRN/Campus. This field study indicated some basic envelope patterns that were applied in simulation models. Occupation variables were identified with temperature and energy consumption monitoring procedures and a verification of illumination and equipment power, both developed at the Campus/UFRN administration building. Three simulation models were proposed according to different design phases and decisions. The first model represents early design decisions, simulating the combination of different types of geometry with three levels of envelope thermal performance. The second model, still as a part of early design phase, analyses thermal changes between circulation halls lateral and central and office rooms, as well as the heat fluxes and monthly temperatures in each circulation hall. The third model analyses the influence of middle-design and detail design decisions on energy consumption and thermal performance. In this model, different solutions of roofs, shading devices, walls and external colors were simulated. The results of all simulation models suggest a high influence of thermal loads due to the incidence of solar radiation on windows and surfaces, which highlights the importance of window shading devices, office room orientation and absorptance of roof and walls surfaces