81 resultados para Portabilidade numérica
Resumo:
Exploration of heavy oil reservoirs is increasing every year in worldwide, because the discovery of light oil reservoirs is becoming increasingly rare. This fact has stimulated the research with the purpose of becoming viable, technically and economically, the exploration of such oil reserves. In Brazil, in special in the Northeast region, there is a large amount of heavy oil reservoir, where the recovery by the so called secondary methods Water injection or gas injection is inefficient or even impracticable in some reservoirs with high viscosity oils (heavy oils). In this scenario, steam injection appears as an interesting alternative for recover of these kinds of oil reservoirs. Its main mechanism consists of oil viscosity reduction through steam injection, increasing reservoir temperature. This work presents a parametric simulation study of some operational and reservoir variables that had influence on oil recovery in thin reservoirs typically found in Brazilian Northeast Basins, that use the steam injection as improved oil recovery method. To carry out simulations, it was used the commercial software STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modeling Group) version 2007.11. Reservoirs variables studied were horizontal permeability, vertical and horizontal permeability ratio, water zone and pay zone thickness ratio, pay zone thickness and thermal conductivity of the rock. Whereas, operational parameters studied were distance between wells and steam injection rate. Results showed that reservoir variables that had more influence on oil recovery were horizontal permeability and water zone and pay zone thickness ratio. In relation to operational variables, results showed that short distances between wells and low steam injection rates improved oil recovery
Resumo:
In Brazilian Northeast there are reservoirs with heavy oil, which use steam flooding as a recovery method. This process allows to reduce oil viscosity, increasing its mobility and consequently its oil recovery. Steam injection is a thermal method and can occurs in continues or cyclic form. Cyclic steam stimulation (CSS) can be repeated several times. Each cycle consisting of three stages: steam injection, soaking time and production phase. CSS becomes less efficient with an increase of number of cycles. Thus, this work aims to study the influence of compositional models in cyclic steam injection and the effects of some parameters, such like: flow injection, steam quality and temperature of steam injected, analyzing the influence of pseudocomponents numbers on oil rate, cumulative oil, oil recovery and simulation time. In the situations analyzed was compared the model of fluid of three phases and three components known as Blackoil . Simulations were done using commercial software (CMG), it was analyzed a homogeneous reservoir with characteristics similar to those found in Brazilian Northeast. It was observed that an increase of components number, increase the time spent in simulation. As for analyzed parameters, it appears that the steam rate, and steam quality has influence on cumulative oil and oil recovery. The number of components did not a lot influenced on oil recovery, however it has influenced on gas production
Resumo:
The multiphase flow occurrence in the oil and gas industry is common throughout fluid path, production, transportation and refining. The multiphase flow is defined as flow simultaneously composed of two or more phases with different properties and immiscible. An important computational tool for the design, planning and optimization production systems is multiphase flow simulation in pipelines and porous media, usually made by multiphase flow commercial simulators. The main purpose of the multiphase flow simulators is predicting pressure and temperature at any point at the production system. This work proposes the development of a multiphase flow simulator able to predict the dynamic pressure and temperature gradient in vertical, directional and horizontal wells. The prediction of pressure and temperature profiles was made by numerical integration using marching algorithm with empirical correlations and mechanistic model to predict pressure gradient. The development of this tool involved set of routines implemented through software programming Embarcadero C++ Builder® 2010 version, which allowed the creation of executable file compatible with Microsoft Windows® operating systems. The simulator validation was conduct by computational experiments and comparison the results with the PIPESIM®. In general, the developed simulator achieved excellent results compared with those obtained by PIPESIM and can be used as a tool to assist production systems development
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
As rochas carbonáticas ocupam, numa visão global, um expressivo volume da crosta terrestre. De maneira geral, pode-se dizer que essas rochas estão presentes nas diversas unidades litoestatigráficas da Terra. Os reservatórios carbonáticos são reservas naturalmente fraturadas que exigem uma abordagem diferenciada na modelagem em programas de simulação numérica. Os modelos de dupla porosidade são descritos por funções de tranferências que modelam o fluxo de óleo entre matriz e fraturas. Em um reservatório carbonático naturalmente fraturado o sistema de fraturas é determinante no escoamento de fluidos dentro da reserva. Os maiores reservatórios carbonáticos do mundo estão situados no Oriente Médio e na América do Norte. As maiores reservas de óleo brasileiras encontradas neste tipo de reservatório estão localizadas nos campos do Pré-Sal. No Pré-Sal, um volume significativo de dióxido de carbono é produzido juntamente com o óleo. A disponibilidade de um volume consideravél de dióxido de carbono derivado da produção de óleo no Pré-Sal favorece a utilização dos processos de EOR (Enhanced Oil Recovery) por injeção de gás. O processo de injeção de dióxido de carbono vem sendo utilizado em uma grande quantidade de projetos pelo mundo. A afinidade existente entre o óleo e o dióxido de carbono causa uma frente miscível entre as duas fases causando inchamento e vaporização do óleo dentro do reservatório. Para o estudo, foi utilizado um modelo base de reservatório de dupla-porosidade, desenvolvido pela CMG para o 6° Projeto de Soluções Comparativas da SPE, que modela sistemas de fraturas e de matriz e a tranferência de massa fluida entre elas, características de reservatórios naturalmente fraturados. Foi feita uma análise da injeção de diferentes vazões de dióxido de carbono no modelo base e em modelos semelhantes, com aumento e redução de 5 e 0.5 pontos nas propriedades de porosidade e permeabilidade da matriz, respectivamente, tendo a produção de óleo como resultado. A injeção de 25 milhões de pés cúbicos por dia de CO2 foi a vazão que obteve a melhor fator de recuperação
Resumo:
The occurrence of heavy oil reservoirs have increased substantially and, due to the high viscosity characteristic of this type of oil, conventional recovery methods can not be applied. Thermal methods have been studied for the recovery of this type of oil, with a main objective to reduce its viscosity, by increasing the reservoir temperature, favoring the mobility of the oil and allowing an increasing in the productivity rate of the fields. In situ combustion (ISC) is a thermal recovery method in which heat is produced inside the reservoir by the combustion of part of the oil with injected oxygen, contrasting with the injection of fluid that is heated in the surface for subsequent injection, which leads to loss heat during the trajectory to the reservoir. The ISC is a favorable method for recovery of heavy oil, but it is still difficult to be field implemented. This work had as an objective the parametric analysis of ISC process applied to a semi-synthetic reservoir with characteristics of the Brazilian Northeast reservoirs using vertical production and vertical injection wells, as the air flow injection and the wells completions. For the analysis, was used a commercial program for simulation of oil reservoirs using thermal processes, called Steam, Thermal and Advanced Processes Reservoir Simulator (STARS) from Computer Modelling Group (CMG). From the results it was possible to analyze the efficiency of the ISC process in heavy oil reservoirs by increasing the reservoir temperature, providing a large decrease in oil viscosity, increasing its mobility inside the reservoir, as well as the improvement in the quality of this oil and therefore increasing significantly its recovered fraction. Among the analyzed parameters, the flow rate of air injection was the one which had greater influence in ISC, obtaining higher recovery factor the higher is the flow rate of injection, due to the greater amount of oxygen while ensuring the maintenance of the combustion front
Resumo:
With the increasing of energetic consumption in the worldwile, conventional reservoirs, known by their easy exploration and exploitation, are not being enough to satisfy this demand, what has made necessary exploring unconventional reservoirs. This kind of exploration demands developing more advanced technologies to make possible to exploit those hydrocarbons. Tight gas is an example of this kind of unconventional reservoir. It refers to sandstone fields with low porosity, around 8%, and permeabilities between 0.1 and 0.0001 mD, which accumulates considerable amounts of natural gas. That natural gas can only be extracted by applying hydraulic fracturing, aiming at stimulating the reservoir, by creating a preferential way through the reservoir to the well, changing and making easier the flow of fluids, thus increasing the productivity of those reservoirs. Therefore, the objective of this thesis is analyzing the recovery factor of a reservoir by applying hydraulic fracturing. All the studies were performed through simulations using the IMEX software, by CMG (Computer Modelling Group), in it 2012.10 version
Resumo:
Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems
Resumo:
The Northeast of Brazil (NEB) shows high climate variability, ranging from semiarid regions to a rainy regions. According to the latest report of the Intergovernmental Panel on Climate Change, the NEB is highly susceptible to climate change, and also heavy rainfall events (HRE). However, few climatology studies about these episodes were performed, thus the objective main research is to compute the climatology and trend of the episodes number and the daily rainfall rate associated with HRE in the NEB and its climatologically homogeneous sub regions; relate them to the weak rainfall events and normal rainfall events. The daily rainfall data of the hydrometeorological network managed by the Agência Nacional de Águas, from 1972 to 2002. For selection of rainfall events used the technique of quantiles and the trend was identified using the Mann-Kendall test. The sub regions were obtained by cluster analysis, using as similarity measure the Euclidean distance and Ward agglomerative hierarchical method. The results show that the seasonality of the NEB is being intensified, i.e., the dry season is becoming drier and wet season getting wet. The El Niño and La Niña influence more on the amount of events regarding the intensity, but the sub-regions this influence is less noticeable. Using daily data reanalysis ERAInterim fields of anomalies of the composites of meteorological variables were calculated for the coast of the NEB, to characterize the synoptic environment. The Upper-level cyclonic vortex and the South atlantic convergene zone were identified as the main weather systems responsible for training of EPI on the coastland
Resumo:
The increase in ultraviolet radiation (UV) at surface, the high incidence of non-melanoma skin cancer (NMSC) in coast of Northeast of Brazil (NEB) and reduction of total ozone were the motivation for the present study. The overall objective was to identify and understand the variability of UV or Index Ultraviolet Radiation (UV Index) in the capitals of the east coast of the NEB and adjust stochastic models to time series of UV index aiming make predictions (interpolations) and forecasts / projections (extrapolations) followed by trend analysis. The methodology consisted of applying multivariate analysis (principal component analysis and cluster analysis), Predictive Mean Matching method for filling gaps in the data, autoregressive distributed lag (ADL) and Mann-Kendal. The modeling via the ADL consisted of parameter estimation, diagnostics, residuals analysis and evaluation of the quality of the predictions and forecasts via mean squared error and Pearson correlation coefficient. The research results indicated that the annual variability of UV in the capital of Rio Grande do Norte (Natal) has a feature in the months of September and October that consisting of a stabilization / reduction of UV index because of the greater annual concentration total ozone. The increased amount of aerosol during this period contributes in lesser intensity for this event. The increased amount of aerosol during this period contributes in lesser intensity for this event. The application of cluster analysis on the east coast of the NEB showed that this event also occurs in the capitals of Paraiba (João Pessoa) and Pernambuco (Recife). Extreme events of UV in NEB were analyzed from the city of Natal and were associated with absence of cloud cover and levels below the annual average of total ozone and did not occurring in the entire region because of the uneven spatial distribution of these variables. The ADL (4, 1) model, adjusted with data of the UV index and total ozone to period 2001-2012 made a the projection / extrapolation for the next 30 years (2013-2043) indicating in end of that period an increase to the UV index of one unit (approximately), case total ozone maintain the downward trend observed in study period
Resumo:
A identificação de fatores que interferem na dor pós-operatória é útil para minimizar o sofrimento desnecessário e favorecer a uma intervenção analgésica adequada, evitando generalizações nas condutas terapêuticas. O propósito dessa investigação foi identificar os fatores preditivos da dor em pacientes submetidos à cirurgia cardíaca e a relação existente entre dor, analgesia e personalidade. Trata-se de um estudo prospectivo e analítico, aprovado pelo comitê de ética da UFRN (175/06), o qual proporcionou uma abordagem multidisciplinar ao envolver áreas distintas como: fisioterapia, psicologia, médica e enfermagem (interdisciplinaridade) na elucidação do objeto de estudo relacionado a fatores preditivos da dor. Para caracterização geral dos pacientes foi utilizada uma ficha de avaliação fisioterapêutica; a dor pós-operatória foi avaliada pela escala numérica de dor e questionário para dor McGill e o Inventário Millon de Estilos de Personalidade (MIPS) foi utilizado para identificar e avaliar as manifestações das características comportamentais e de personalidade. Foram acompanhados, do 1º ao 5º dia de pós-operatório (DPO), 160 pacientes submetidos à cirurgia cardíaca, 57,5% do sexo masculino, com idade média de 56,8±14,4 anos, sendo incluídos no estudo aqueles que se queixaram de dor no pós-operatório em pelo menos um dos dias de avaliação e assinaram termo de concentimento livre e esclarecido (TCLE). Os dados foram submetidos ao teste Qui-quadrado, regressão logística multivariada, teste de correlação de Spearman, teste t e ANOVA. Ao serem submetidos à análise de regressão foram encontrados seis fatores preditivos da dor: tempo cirúrgico > 3 horas, dreno mediastinal e lateral, tosse, vômitos, tempo de dreno > 24 horas e sexo feminino. Estes fatores apresentaram uma correlação positiva e significava com a intensidade dolorosa referida pelos pacientes na escala numérica de dor e os pacientes que apresentaram mais fatores preditivos da dor referiram mais dor. 23 Já em relação ao McGill não se obteve diferença significativa entre os pacientes com mais e menos fatores preditivos. Observou-se que foram administrados diferentes tipos de analgésicos, isolados ou associados, sendo estes: paracetamol, paracetamol associado à codeína, dipirona, tramadol, toradol e tilatil. A percepção dolorosa apresentou magnitudes variando de leve a moderada do 1º ao 5º DPO e ao ser relacionada com as características de personalidade, nos pacientes com menos dor, observou-se os fatores: preservação, individualismo, introversão e os com mais dor foram: proteção, extroversão, retraimento, discrepância, afetividade, acomodação, comunicabilidade e firmeza. Evidenciou-se que o comportamento doloroso pós-cirurgia cardíaca é multifatorial e que a determinação da existência de fatores preditivos da dor permite ao profissional da área de saúde fazer o uso adequado dos analgésicos, haja vista que o alívio da dor é responsabilidade de todos os profissionais da saúde. Os aspectos psicológicos enquanto características de personalidade podem influenciar padrões de comportamento como os observados.
Resumo:
Leukemia is a heterogeneous group of hematologic malignancies that result from partial or total transformation of the blast cells. The Acute Lymphoblastic Leukemia (ALL) is the most common malignancy in childhood, especially in male, Caucasian children younger than 14 years. Several criteria are adopted to classify ALL, including the cell morphology, cytochemistry, immunophenotyping and cytogenetic analysis. Cytogenetic studies allow a more detailed analysis to detect chromosomal abnormalities of leukemic cells. These modifications will determine the diagnosis, classification, stage characterization, remission assessment and prognosis. In this study were evaluated 30 patients, aged from four months to seventeen years, of both sexes and various ethnicities. The age distribution showed that 67% of patients had between one and ten years (with mean age of XX years old), the most prevalent ethnic was Caucasian (50%) and 57% were males. According to immunophenotype, 93% of patients had B-cells progenitor ALL and 7% early lineage T. Considering the total studied population, the most frequent medical findings were lymphadenopathy (37%), hepatomegaly (77%) and splenomegaly (70%), where one patient could present more than one of these medical findings. Regarding the CBC, the majority of patients had hemoglobin below 10 g / dl (73%), leukocyte count less than 10.000/μL (60%) and platelet count below 150.000/μL (83%). Chromosomal abnormalities were observed in 64% of all patients, where hyperdiploidy was the most common numerical change (67%), followed by hypodiploid (33%). All these data are in agreement with the literature. Moreover, complexes structural and/or number changes not yet described in literature were observed, which indicated poor prognosis. Finally, we concluded that this study demonstrated the importance of cytogenetic study in the diagnosis and identification of prognostic factors in pediatric patients with ALL in Rio Grande do Norte. The results obtained in this study are extremely useful and emphasizes that surveys of this nature must be conducted more frequently in our state
Processos carioevolutivos na ordem tetraodontiformes: uma visão através de suas diferentes linhagens
Resumo:
Given the great diversity of fishes, the Order Tetraodontiformes stands to show genetic and morphological characteristics enough singular. The fishes of this order have a compact DNA which favors molecular studies, as well as comparisons with more basal species. Model of genome evolution, there are still many gaps in knowledge about their chromosomal patterns and how evolutionary rearrangements influence the marked variation in DNA content of this order. In view of this, we present cytogenetic analyzes of the species Acanthostracion quadricornis (Ostraciidae), A. polygonius (Ostraciidae) Melichthys niger (Balistidae) Cantherhines macrocerus (Monacanthidae) and C. pullus (Monacanthidae), Lagocephalus laevigatus, Colomesus psittacus and Canthigaster figueiredoi (Tetraodontidae), to contribute with cytogenetic data for this group. The analysis was performed by C-banding, Ag-RONs, coloring with base-specific fluorochromes DAPI-CMA3, restriction enzymes AluI, EcoRI, TaqI, PstI and HinfI and in situ hybridization with probes for ribosomal DNA 18S and 5S. The heterochromatic ultrastructure of A. quadricornis and A. polygonius revealed a outstanding heterochromatin content, which may indicate that the accumulation or loss of extensive heterochromatin content could be responsible for large variations in genomic content displayed in different Tetraodontiformes families. The species Cantherhines macrocerus, C. pullus (Monacanthidae) and Melichthys niger (Balistidae) shows a huge karyotypic similarity both numerically and structural. L. laevigatus showed similar cytogenetic features (2n = 44 and single RONs) to the species of the genus Takifugu, which reinforces the idea of their phylogenetic relationships. C. psittacus presented the highest diploid number described for the family (2n = 56) and large amount of HC, features that related with its sister family Diodontidae. Cytogenetic analysis in C. figueiredoi revealed heterochromatic polymorphisms, RONs multiple and Bs chromosomes. These events are rare in marine fishes, and are possibly associated with the strong restructuring and genomic reduction that this family has been suffered. These features, plus the morphological and molecular data suggests that these species share the same ancestral branch, with a possible monophyletic origin. In this study, new contributions to the knowledge of evolutionary patterns facing by Tetraodontiformes are provided and discussed under cytotaxonomyc, genomic and evolutionary perspectives.
Resumo:
In Mathematics literature some records highlight the difficulties encountered in the teaching-learning process of integers. In the past, and for a long time, many mathematicians have experienced and overcome such difficulties, which become epistemological obstacles imposed on the students and teachers nowadays. The present work comprises the results of a research conducted in the city of Natal, Brazil, in the first half of 2010, at a state school and at a federal university. It involved a total of 45 students: 20 middle high, 9 high school and 16 university students. The central aim of this study was to identify, on the one hand, which approach used for the justification of the multiplication between integers is better understood by the students and, on the other hand, the elements present in the justifications which contribute to surmount the epistemological obstacles in the processes of teaching and learning of integers. To that end, we tried to detect to which extent the epistemological obstacles faced by the students in the learning of integers get closer to the difficulties experienced by mathematicians throughout human history. Given the nature of our object of study, we have based the theoretical foundation of our research on works related to the daily life of Mathematics teaching, as well as on theorists who analyze the process of knowledge building. We conceived two research tools with the purpose of apprehending the following information about our subjects: school life; the diagnosis on the knowledge of integers and their operations, particularly the multiplication of two negative integers; the understanding of four different justifications, as elaborated by mathematicians, for the rule of signs in multiplication. Regarding the types of approach used to explain the rule of signs arithmetic, geometric, algebraic and axiomatic , we have identified in the fieldwork that, when multiplying two negative numbers, the students could better understand the arithmetic approach. Our findings indicate that the approach of the rule of signs which is considered by the majority of students to be the easiest one can be used to help understand the notion of unification of the number line, an obstacle widely known nowadays in the process of teaching-learning
Resumo:
It is an exploratory and descriptive study made by a quantitative approach, developed among February and May 2010, aiming to assess the pain of patients underwent abdominal surgeries in a University Hospital, in Natal/RN; to identify the local and intensity of the pain based on Numerical Estimative Scale; to analyze the pain related to the sensorial-discriminative, motivational-affective and cognitive-assessment dimensions, using the McGill Questionnaire pain; to establish a relation between the pain process and age, gender, religion, and king of surgery; to identify the medicines efficiency used to control postoperative pain. The sample was composed by 253 patients underwent abdominal surgeries. The results showed a total of 63.63% females between 38 and 47 years of age (21.34%); illiterates (21.73%); married (64.03%), living in Natal and surroundings (67.97%) and Catholics (74.30%). In their first assessment, 84.19% showed postoperative pain; the pain was considered light in 18.97% of them, moderate in 21.74% and severe in 43.48%. The mean number of descriptors chosen through the McGill Questionnaire Pain was 10.78 (DP= 6.09) and pain rating 23.65 (DP= 15.93). The descriptors selected with higher frequency were: sickening pain (69.01%), tired (65.25%), thin (62.44%), bored (58.69%), ardor (46.48%), pointed (38.50%) and colic (35.21%). In their second assessment, 57.71% of patients didn t relate any postoperative pain and 42.29% were still complaining about the pain. After taking analgesic medication, just 41.90% of patients who had complete pain relief. The Pharmacological groups most used were: simple analgesic (37.86%), weak opioids (32.98%), AINES (19.85%) and strong opioid (9.31%). It was not found a significant postoperative pain variation related to the sexes, religion and kind of surgery. It was concluded there were a high level in the number of patients with postoperative pain, mainly in a severe scale. Less than half of patients had the pain relief. Then, it was observed there was not coherence between the pain intensity and the analgesic it was used. To solve or relieve this kind of problems is necessary a permanent education to the health professionals who works in this area