Estudo dos efeitos comportamentais do neuropeptídeos em camundongos submetidos a modelos animais de Parkinson

Neuropeptide S (NPS) is the endogenous ligand of a G-protein coupled receptor. Preclinical studies have shown that NPSR receptor activation can promote arousal, anxiolytic-like behavioral, decrease in food intake, besides hyperlocomotion, which is a robust but not well understood phenomenon. Previous findings suggest that dopamine transmission plays a crucial role in NPS hyperactivity. Considering the close relationship between dopamine and Parkinson Disease (PD), and also that NPSR receptors are expressed on dopaminergic nuclei in the brain, the current study attempted to investigate the effects of NPS in motor deficits induced by intracerebroventricular (icv) administration of 6-OHDA and systemic administration of haloperidol. Motor deficits induced by 6-OHDA and haloperidol were evaluated on Swiss mice in the rota-rod and catalepsy test. Time on the rotating rod and time spent immobile in the elevated bar were measured respectively in each test. L-Dopa, a classic antiparkinsonian drug, and NPS were administrated in mice submitted to one of the animal models of PD related above. 6-OHDA injection evoked severe motor impairments in rota-rod test, while the cataleptic behavior of 6-OHDA injected mice was largely variable. The administration of L-Dopa (25 mg/kg) and NPS (0,1 and 1 nmol) reversed motor impairments induced by 6-OHDA in the rota-rod. Haloperidolinduced motor deficits on rota-rod and catalepsy tests which were reversed by L-Dopa (100 e 400 mg/kg), but not by NPS (0,1 and 1 nmol) administration. The association of L-Dopa 10 mg/kg and NPS 1 nmol was also unable to counteract haloperidol-induced motor deficits. To summarize, 6-OHDA-, but not haloperidol-, induced motor deficits were reversed by the central administration of NPS. These data suggest that NPS possibly facilitates dopamine release in basal ganglia, what would explain the overcome of motor performance promoted by NPS administration in animals pretreated with 6-OHDA, but not haloperidol. Finally, the presented findings point, for the first time, to the potential of NPSR agonist as an innovative treatment for PD.

Secagem de misturas de polpa de frutas tropicais em leito de jorro

Drying of fruit pulps in spouted beds of inert particles has been indicated as a viable technique to produce fruit powders. Most of the processes employed to produce dried fruit pulps and juices, such as Foam Mat, encapsulation by co-crystallization and spray drying utilize adjuvant and additives (such as thickeners, coating materials, emulsifiers, acidulants, flavors and dyes), which is not always desirable. The fruit pulp composition exerts an important effect on the fruit powder production using a spouted bed. In the study by Medeiros (2001) it was concluded that lipids, starch and pectin contents play an important role on the process performance, enhancing the powder production; however, the drying of fruit pulps containing high content of reducing sugars (glucose and fructose) is practically unviable. This work has the objective of expanding the studies on drying of fruit pulps in spouted bed with aid of adjuvant (lipids, starch and pectin) aiming to enhance the dryer performance without jeopardizing the sensorial quality of the product. The optimum composition obtained by Medeiros (2001) was the basis for preparing the mixtures of pulps. The mixture formulations included pulps of mango (Mangifera indica), umbu (Spondias tuberosa) and red mombin (Spondia purpurea) with addition of cornstarch, pectin and lipids. Different products were used as lipids source: olive and Brazil nut oils, coconut milk, heavy milk, powder of palm fat and palm olein. First of all, experiments were conducted to define the best formulation of the fruit pulps mixture. This definition was based on the drying performance obtained for each mixture and on the sensorial characteristics of the dry powder. The mixture formulations were submitted to drying at fixed operating conditions of drying and atomizing air flow rate, load of inert particles, temperature and flow rate of the mixture. The best results were obtained with the compositions having powder of palm fat and palm olein in terms of the drying performance and sensorial analysis. Physical and physicochemical characteristics were determined for the dry powders obtained from the mixtures formulations. Solubility and reconstitution time as well as the properties of the product after reconstitution were also evaluated. According to these analyses, the powder from the mixtures formulations presented similar characteristics and compatible quality to those produced in other types of dryers. Considering that the palm olein is produced in Brazil and that it has been used in the food industry substituting the palm fat powder, further studies on drying performance were conducted with the composition that included the palm olein. A complete factorial design of experiments 23, with three repetitions at the central point was conducted to evaluate the effects of the air temperature, feeding flow rate and intermittence time on the responses related to the process performance (powder collection efficiency, material retained in the bed and angle of repose of the inert particles after the process) and to the product quality (mean moisture content, loss of vitamin C and solubility). Powder production was uniform for the majority of the experiments and the higher efficiency with lower retention in the bed (59.2% and 1.8g, respectively) were obtained for the air temperature of 80°C, mixture feed rate of 5ml/min in intervals of 10 min. The statistical analysis of the results showed that the process variables had individual or combined significant influences on the powder collection efficiency, material retention in the bed, powder moisture content and loss of vitamin C. At the experimental ranges of this work, the angle of repose and solubility were not influenced by the operating variables. From the results of the experimental design, statistical models were obtained for the powder moisture content and loss of vitamin C

Utilização de rejeitos de Caulins na Síntese de Zeólita A

Three studies were performed using tailings kaolin for the synthesis of zeolite A. The first synthesis of zeolite A was performed using a kaolin waste generated from the beneficiation of kaolin for paper production process was studied. The kaolin waste was thermally activated at a temperature range of 550-800°C. For comparison was performed a synthesis pattern of Zeolite A(procedure IZA). The prepared materials were characterized by 27Al MAS NMR, X-ray diffraction and scanning electron microscopy with microprobe rays. The pre-tramento proved to be the most appropriate and suitable temperatures are between 600 and 700°C. Observed the formation of zeolite A in all materials, reaching 52% crystallinity, and the presence of phase sodalite and amorphous material. The second study was the use of a highly reactive metakaolin originating from the Jari region in the synthesis of zeolite A by a new method of hydrothermal synthesis. The zeolite is obtained pure and highly crystalline employing the Jari kaolin calcined at 600 ° C for 2h when the transformation to metakaolin occurs. Get to zeolite phase A at 4pm. The best crystallization time was of 24 h afforded a crystallinity of 67.9%. The third study was the evaluation of the NaOH / metakaolin and crystallization time on the synthesis of zeolite NaA from a sample of kaolin waste, named Kaolin Coverage. The experiments were performed using statistical design (axial points) and rejoinder the center point. The samples were characterized by X-ray diffraction (XRD), scanning microscopic analysis and chemical analysis using an EPMA microprobe. The results showed that a relationship exists between the amount of NaOH added and the crystallization time. The experiment performed using the lowest ratio NaOH / metakaolin (0.5) and shorter (4 h) produced an amorphous material. The increase ratio of NaOH / metakaolin and crystallization time leads to formation of a more crystalline NaA phase, but the presence of phase with sodalite as impurities

Avaliação da poatencialidade da perlita natural e expandida na adsorção de metais

The contamination by metal ions has been occurring for decades through the introduction of liquid effluent not treated, mainly from industrial activities, rivers and lakes, affecting water quality. For that the effluent can be disposed in water bodies, environmental standards require that they be adequately addressed, so that the concentration of metals does not exceed the limits of standard conditions of release in the receptor. Several methods for wastewater treatment have been reported in the literature, but many of them are high cost and low efficiency. The adsorption process has been used as effective for removal of metal ions. This paper presents studies to evaluate the potential of perlite as an adsorbent for removing metals in model solution. Perlite, in its natural form (NP) and expanded (EP), was characterized by X-ray fluorescence, X-ray diffraction, surface area analysis using nitrogen adsorption (BET method), scanning electron microscopy and Fourier transform infrared spectroscopy. The physical characteristic and chemical composition of the material presented were appropriate for the study of adsorption. Adsorption experiments by the method of finite bath for model solutions of metal ions Cr3+, Cu2+, Mn2+ and Ni2+ were carried out in order to study the effect of pH, mass of the adsorbent and the contact time on removal of ions in solution. The results showed that perlite has good adsorption capacity. The NP has higher adsorption capacity (mg g-1) than the EP. According to the values of the constant of Langmuir qm (mg g-1), the maximum capacity of the monolayer was obtained and in terms of proportion of mass, we found the following order experimental adsorption: Cr3+ (2.194 mg g- 1) > Ni2+ (0.585 mg g-1) > Mn2+ (0.515 mg g-1) > Cu2+ (0.513 mg g-1) and Cr3+ (1.934 mg g-1)> Ni2+ (0.514 mg g-1) > Cu2+ (0.421 mg g-1) > Mn2+ (0.364 mg g-1) on the NP and EP, respectively. The experimental data were best fitted the Langmuir model compared to Freundlich for Cu2+, Mn2+ and Ni2+. However, for the Cr3+, both models fit the experimental data

Adiamento da aposentadoria e o significado do trabalho para servidores de uma universidade federal

This study investigated the intention of the older workers to continue working after state pension age/time. On this way, it explores the relation between this intention and factors related with the meanings of the work and retirement. Specifically, it was examined that factors related to work and non-work are predictors of the intention to continue working, and it was explored if meanings of retirement are linked to this decision. It is a crosssectional mixed methods study, using a survey conducted with 283 federal civil servants of a federal Northeastern University which were near retirement. It envolved an on-line questionnaire, with open-ended questions and the likert-type scale "Older Worker's Intention to Continue Working" (OWICW) of Shacklock and Brunneto (2011), which was validated to the Brazilian version. The quantitative data were analyzed using descriptive and multivariate statistics, specifically procedures for comparing means and coefficients of multiple logistic regression. The qualitative data were analyzed using the lexicographical technique Descending Hierarchical Classification. The findings indicate that most participants want to continue in paid work, and that perception of personal autonomy at work, interpersonal relationships at work, interests outside of work, and flexible working arrangements are significant predictors of intention to continue working. Furthermore, the perception of personal autonomy at work, flexible working arrangements, and the financial incentives are predictors of decision to postpone retirement and remain in the organization. The analysis revealed five patterns of meanings of retirement: "worker's right", "resting", "idle time at home", "new stage in the life course", and "enjoy the use of time”. The decision to postpone retirement is linked to idleness and lack of substitutionary activities work, and the decision to stop working linked to retirement as a life with more quality. The study provides information that can contribute with management policies before the process of retirement decision.

Sinalização endógena do sistema Nociceptina/Orfanina FQ - receptor NOP: envolvimento na modulação da depressão experimental induzida por lipopolissacarídeo

During the last decades, it has been established that there is a relationship between major depression and activation of immune system. Nociceptin/orphanin FQ (N/OFQ) is the natural ligand of a Gi-protein coupled receptor named NOP, both compose the peptidergic system wich is involved in the regulation of mood states and inflammatory responses. Considering these actions, the present thesis aimed to investigate the consequences of blocking NOP signaling in lipopolysaccharide (LPS)-induced sickness and depressive-like behaviors in mice. Systemic administration of LPS doses, that do not cause sepsis in mice, induce changes in their behaviors related with activity of pro-inflammatory cytokines tumor necrosis factor-α (TNF-α) and interleukins 6 (IL-6) and 1β (IL-1 β). At the time points of 2 to 6 h and 24 h after intraperitoneal injection, mice treated with LPS displayed, respectively, sickness and depressive-like behaviors. In the present work the administration of LPS 0.8 mg/kg (ip) significantly induced sickness signs in Swiss and CD-1 mice, such as weight loss, transient reduction in rectal temperature and decrease of food and water intake. Moreover at 24 h after LPS injection these same mice strains displayed significantly increased immobility time on the tail suspension test (TST) when compared with control mice, this alteration was not related with possible locomotion impairments as verified on the open field test. Treatment with Nortriptyline 30 mg/kg (ip, 60 min prior the TST) reduced the immobility time of control and LPS-treated mice and was used as standard antidepressant. The NOP receptor antagonist SB-612111 (10 mg/kg, ip), 30 min prior LPS, did not modify LPS-induced sickness signs and depressive-like behavior. However, when injected 24 h after LPS treatment, SB-612111 (ip, 30 min prior the TST) as well as the peptidergic NOP receptor antagonist UFP-101 (10 nmol/2μL, icv, 5 min prior the TST) significantly reversed the toxin effects. The protocol of LPS-induced depressive-like states was also tested in NOP receptor knockout mice (NOP(-/-)) and their respective wild types (NOP(+/+)). LPS evoked transient rectal temperature reduction in NOP(-/-) mice and loss of body weight, food and water intake reduction in both NOP(+/+) and NOP(-/-) mice. The consumption of water was significantly different due to the genotype. LPS injection induced transient changes in pro-inflammatory cytokines. At 6 h after LPS injection, serum levels of TNF-α were significantly increased in NOP(+/+) and NOP(-/-) mice, as the IL-6 levels were significantly increased just in NOP(+/+) serum. At 24 h after LPS treatment the pro-inflammatory cytokines had returned to the baseline levels in both genotypes. LPS treatment elicited depressive-like effects in NOP(+/+) but not in NOP(-/-) mice. The data obtained during the execution of this doctoral thesis reveal that pharmacological and genetic blockade of NOP signaling does not affect LPS evoked sickness signs while reversing depressive-like behavior. In conclusion, these results highlight the involvement of the peptidergic system N/OFQ - NOP receptor in the modulation of behaviors related to mood and activation of the immune system.

Transplantes de córneas no estado do Rio Grande do Norte: aspectos epidemiológicos e clínicos

This study aimed to characterize in a clinical and epidemiological way the patients who are on a waiting list for transplantation and the patients transplanted with corneal tissue in a corneal transplants reference service in the state of Rio Grande do Norte. It is an epidemiological study of a quantitative approach, with cross-sectional, descriptive and analytical cut including all patients on the waiting list for transplantation (population A) and the patients already transplanted with a corneal tissue (population B) in a reference service. In population A, there was a census conducted of patients on the waiting list for corneal transplantation (n=62 patients). In population B, the sample was non-probabilistic and corresponded to all corneal transplants performed in the service in the period from 2010 to 2014 (n=258). This study is approved by the Research Ethics Committee of the Federal University of Rio Grande do Norte, in Opinion 876 177 and CAAE 37533014.8.0000.5537. Data were collected in full in the period from January to April 2015, by two instruments built to systematize the necessary data collection. After being coded and tabulated, data were analyzed using the Statistical Package for Social Sciences software, version 20.0. The definition of variables and their distribution patterns were presented as frequencies and measures of central tendency while, for multivariate analysis, the effect of magnitude measures were applied (prevalence ratio) and measures of association (chi-square test or Fisher's exact test) for a 0.05 significance level. The results are shown in two scientific articles coming from the field survey data. It was found that the epidemiological profile of patients on the waiting list (n=62) showed a prevalence of individuals aged over 50 years old, female (54.84%) and residents of the middle region of East Rio Grande do Norte (66.13%). The clinical profile of patients with corneal transplantation (n=258) was characterized by being male (51.16%) with an average age of 49.33 years old and 57.75% were coming from East Rio Grande do Norte. The average time on the waiting list was 172.63 days in elective transplants and 9.03 days in urgent transplants. Keratoconus was the main indicator condition to perform the transplant. For patients on the waiting list, the variable “type of disorder of the cornea” showed statistically significant association with gender and age. For patients with corneal transplants, the variable "type of disorder of the cornea" was associated with the variables gender, age, previous surgery, failure of previous graft, classification of the eye and glaucoma. By characterizing the clinical and epidemiological profile of corneal transplants, it is possible to question the reality, pointing about the care that should be offered and develop targeted interventions to collective and individual needs intrinsic to patients who need this surgery as a treatment option.

Caracterização de compósitos Nb-20%cu obtidos por moagem de alta energia e sinterizados por fase líquida

In this work, was studied the formation of a composite of the refractory metal niobium with copper, through the process of high-energy milling and liquid phase sintering. The HEM can be used to synthesize composite powders with high homogeneity and fine size particle distribution. It may also produce the solid solubility in immiscible systems such as Nb-Cu, or extend the solubility of systems with limited solubility. Therefore, in the immiscible system Cu-Nb, the high-energy milling was successfully used to obtain the composite powder particles. Initially, the formation of composite particles during the HEM and the effect of preparation technique on the microstructure of the material was evaluated. Four loads of Nb and Cu powders containing 20%wt Cu were synthesized by MAE in a planetary type ball mill under different periods of grinding. The influence of grinding time on the metal particles is evaluated during the process by the withdrawal of samples at intermediate times of milling. After compaction under different forces, the samples were sintered in a vacuum furnace. The liquid phase sintering of these samples prepared by HEM produced a homogeneous and fine grained. The composite particles forming the sintered samples are the addition of a hard phase (Nb) with a high melting point, and a ductile phase (Cu) with low melting point and high thermal and electrical conductivities. Based on these properties, the Nb-Cu system is a potential material for many applications, such as electrical contacts, welding electrodes, coils for generating high magnetic fields, heat sinks and microwave absorbers, which are coupled to electronic devices. The characterization techniques used in this study, were laser granulometry, used to evaluate the homogeneity and particle size, and the X-ray diffraction, in the phase identification and to analyze the crystalline structure of the powders during milling. The morphology and dispersion of the phases in the composite powder particles, as well the microstructures of the sintered samples, were observed by scanning electron microscopy (SEM). Subsequently, the sintered samples are evaluated for density and densification. And finally, they were characterized by techniques of measuring the electrical conductivity and microhardness, whose properties are analyzed as a function of the parameters for obtaining the composite

Estudo sobre o efeito dos parâmetros de processamento dos pós e sinterização do aço inox 316l reforçado com NbC

This masther dissertation presents a contribution to the study of 316L stainless steel sintering aiming to study their behavior in the milling process and the effect of isotherm temperature on the microstructure and mechanical properties. The 316L stainless steel is a widely used alloy for their high corrosion resistance property. However its application is limited by the low wear resistance consequence of its low hardness. In previous work we analyzed the effect of sintering additives as NbC and TaC. This study aims at deepening the understanding of sintering, analyzing the effect of grinding on particle size and microstructure and the effect of heating rate and soaking time on the sintered microstructure and on their microhardness. Were milled 316L powders with NbC at 1, 5 and 24 hours respectively. Particulates were characterized by SEM and . Cylindrical samples height and diameter of 5.0 mm were compacted at 700 MPa. The sintering conditions were: heating rate 5, 10 and 15◦C/min, temperature 1000, 1100, 1200, 1290 and 1300◦C, and soaking times of 30 and 60min. The cooling rate was maintained at 25◦C/min. All samples were sintered in a vacuum furnace. The sintered microstructure were characterized by optical and electron microscopy as well as density and microhardness. It was observed that the milling process has an influence on sintering, as well as temperature. The major effect was caused by firing temperature, followed by the grinding and heating rate. In this case, the highest rates correspond to higher sintering.