24 resultados para Normalização BIM


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Recently, Brazilian scientific production has increased greatly, due to demands for productivity from scientific agencies. However, this high increases requires a more qualified production, since it s essential that publications are relevant and original. In the psychological field, the assessment scientific journals of the CAPES/ANPEPP Commission had a strong effect on the scientific community and raised questions about the chosen evaluation method. Considering this impact, the aim of this research is a meta-analysis on the assessment of Psychological journals by CAPES to update the Qualis database. For this research, Psychology scientific editors (38 questionnaires were applied by e-mail) were consulted, also 5 librarians who work with scientific journals assessment (semi-structured interviews) and 8 members who acted as referees in the CAPES/ANPEPP Commission (open questions were sent by e-mail). The results are shown through 3 analysis: general evaluation of the Qualis process (including the Assessment Committee constitution), evaluation criteria used in the process and the effect of the evaluation on the scientific community (changes on the editing scene included). Some important points emerged: disagreement among different actors about the suitability of this evaluation model; the recognition of the improvement of scientific journals, mainly toward normalization and diffusion; the verification that the model does not point the quality of the journal, i.e., the content of the scientific articles published in the journal; the disagreement with the criteria used, seemed necessary and useful but needed to be discussed and cleared between the scientific community. Despite these points, the scientific journals evaluation still is the main method to assure quality for Psychology publications

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This research has resulted of investigations appeared from our work experience as psychologist in a prison of the state Rio Grande do Norte. It deals with the meeting with prisoner in the search for the rescue of the human being dignity, discovering the being that finds annulled by backwards of the prison. The current debate on the prisoners in Brazil has as focus the creation of efficient strategies in the combat to the criminal acts, not being worried in understanding the historical and social conditions in the context in which such acts develop. Our objective was to reach an understanding of the experience of the prisoner in the situation of freedom deprivation in Natal (RN) city. Its significant social relevance meets in emphasized thematic which intends to be revealing of the not-said one of these citizens. The epistemological space and the vision of adopted human being support in the humanist ideas of the Centered Approach in the Person and construct self, central nucleus of the personality theory proposal by Carl Rogers. We opt to the phenomenological method as way of access to the singularity of the experience of each one of the participants, supporting us in the strategy of the narrative as expression of the lived world. The results had pointed that the investigated experience is through suffering, that is, the way to be in the world of prisoner in the situation of freedom deprivation is felt by him/her as difficult to support. This reality is had by him/her as difficult to control, having a negative emotional repercussion for the self, leading the citizen to the alienation of his/her existential flow in these circumstances. The reflections produced in this work take us to consider that the punishment practices on behalf of a normalization of the behavior, linked to the recovery idea, do not meet to the intention of the arrests, that come demonstrating to the inefficacy of the objectives shown in the law as well as the loss of the human being dignity

Relevância:

10.00% 10.00%

Publicador:

Resumo:

It is considered that the Strategic Alignment IT is the first step within the IT Governance process for any institution. Taking as initial point the recognition that the governance corporate has an overall view of the organizations, the IT Governance takes place as a sub-set responsible for the implementation of the organization strategies in what concerns the provision of the necessary tools for the achievement of the goals set in the Institutional Development Plan. In order to do so, COBIT specifies that such Governance shall be built on the following principles: Strategic Alignment, Value Delivery, Risk Management, Performance Measurement. This paper aims at the Strategic Alignment, considered by the authors as the foundation for the development of the entire IT Governance core. By deepening the technical knowledge of the management system development, UFRN has made a decisive step towards the technical empowerment needed to the “Value Delivery”, yet, by perusing the primarily set processes to the “Strategic Alignment”, gaps that limited the IT strategic view in the implementation of the organizational goals were found. In the qualitative study that used documentary research with content analysis and interviews with the strategic and tactical managers, the view on the role of SINFO – Superintendência de Informática was mapped. The documentary research was done on public documents present on the institutional site and on TCU – Tribunal de Contas da União – documents that map the IT Governance profiles on the federal public service as a whole. As a means to obtain the documentary research results equalization, questionnaires/interviews and iGovTI indexes, quantitative tools to the standardization of the results were used, always bearing in mind the usage of the same scale elements present in the TCU analysis. This being said, similarly to what the TCU study through the IGovTI index provides, this paper advocates a particular index to the study area – SA (Strategic Alignment), calculated from the representative variables of the COBIT 4.1 domains and having the representative variables of the Strategic Alignment primary process as components. As a result, an intermediate index among the values in two adjacent surveys done by TCU in the years of 2010 and 2012 was found, which reflects the attitude and view of managers towards the IT governance: still linked to Data Processing in which a department performs its tasks according to the demand of the various departments or sectors, although there is a commission that discusses the issues related to infrastructure acquisition and systems development. With an Operational view rather than Strategic/Managerial and low attachment to the tools consecrated by the market, several processes are not contemplated in the framework COBIT defined set; this is mainly due to the inexistence of a formal strategic plan for IT; hence, the partial congruency between the organization goals and the IT goals.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This thesis presents and discusses the results of ambient seismic noise correlation for two different environments: intraplate and Mid-Atlantic Ridge. The coda wave interferometry method has also been tested for the intraplate data. Ambient noise correlation is a method that allows to retrieve the structural response between two receivers from ambient noise records, as if one of the station was a virtual source. It has been largely used in seismology to image the subsurface and to monitor structural changes associated mostly with volcanic eruptions and large earthquakes. In the intraplate study, we were able to detect localized structural changes related to a small earthquake swarm, which main event is mR 3.7, North-East of Brazil. We also showed that the 1-bit normalization and spectral whitening result on the loss of waveform details and that the phase auto-correlation, which is amplitude unbiased, seems to be more sensitive and robust for our analysis of a small earthquake swarm. The analysis of 6 months of data using cross-correlations detect clear medium changes soon after the main event while the auto-correlations detect changes essentially after 1 month. It could be explained by fluid pressure redistribution which can be initiated by hydromechanical changes and opened path ways to shallower depth levels due to later occurring earthquakes. In the Mid-Atlantic Ridge study, we investigate structural changes associated with a mb 4.9 earthquake in the region of the Saint Paul transform fault. The data have been recorded by a single broadband seismic station located at less than 200 km from the Mid-Atlantic ridge. The results of the phase auto-correlation for a 5-month period, show a strong co-seismic medium change followed by a relatively fast post-seismic recovery. This medium change is likely related to the damages caused by the earthquake’s ground shaking. The healing process (filling of the new cracks) that lasted 60 days can be decomposed in two phases, a fast recovery (70% in ~30 days) in the early post-seismic stage and a relatively slow recovery later (30% in ~30 days). In the coda wave interferometry study, we monitor temporal changes of the subsurface caused by the small intraplate earthquake swarm mentioned previously. The method was first validated with synthetics data. We were able to detect a change of 2.5% in the source position and a 15% decrease of the scatterers’ amount. Then, from the real data, we observed a rapid decorrelation of the seismic coda after the mR 3.7 seismic event. This indicates a rapid change of the subsurface in the fault’s region induced by the earthquake.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This thesis presents and discusses the results of ambient seismic noise correlation for two different environments: intraplate and Mid-Atlantic Ridge. The coda wave interferometry method has also been tested for the intraplate data. Ambient noise correlation is a method that allows to retrieve the structural response between two receivers from ambient noise records, as if one of the station was a virtual source. It has been largely used in seismology to image the subsurface and to monitor structural changes associated mostly with volcanic eruptions and large earthquakes. In the intraplate study, we were able to detect localized structural changes related to a small earthquake swarm, which main event is mR 3.7, North-East of Brazil. We also showed that the 1-bit normalization and spectral whitening result on the loss of waveform details and that the phase auto-correlation, which is amplitude unbiased, seems to be more sensitive and robust for our analysis of a small earthquake swarm. The analysis of 6 months of data using cross-correlations detect clear medium changes soon after the main event while the auto-correlations detect changes essentially after 1 month. It could be explained by fluid pressure redistribution which can be initiated by hydromechanical changes and opened path ways to shallower depth levels due to later occurring earthquakes. In the Mid-Atlantic Ridge study, we investigate structural changes associated with a mb 4.9 earthquake in the region of the Saint Paul transform fault. The data have been recorded by a single broadband seismic station located at less than 200 km from the Mid-Atlantic ridge. The results of the phase auto-correlation for a 5-month period, show a strong co-seismic medium change followed by a relatively fast post-seismic recovery. This medium change is likely related to the damages caused by the earthquake’s ground shaking. The healing process (filling of the new cracks) that lasted 60 days can be decomposed in two phases, a fast recovery (70% in ~30 days) in the early post-seismic stage and a relatively slow recovery later (30% in ~30 days). In the coda wave interferometry study, we monitor temporal changes of the subsurface caused by the small intraplate earthquake swarm mentioned previously. The method was first validated with synthetics data. We were able to detect a change of 2.5% in the source position and a 15% decrease of the scatterers’ amount. Then, from the real data, we observed a rapid decorrelation of the seismic coda after the mR 3.7 seismic event. This indicates a rapid change of the subsurface in the fault’s region induced by the earthquake.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper aims to verify the Burnout´s possibilities of incidence, finding the creating dimensions and comparing with the socio-demographics characteristics of the researched professionals. This quantitative-descriptive search has a population of 197 workers of 23 nourishing companies in Rio Grande do Norte. This population is predominantly male, younger than 28 years old, single, relatively instructed (57,07% with complete high school) and having just started their current job since 79% of the interviewees are in the company less than six years. The AUDITORIA DO SISTEMA HUMANO (ASH) model, utilized for investigation and developed for the Spaniards Quijano and Navarro in 1999, has several dimensions about human resources management and the organizational effectiveness, but only makes part of the research in 19 questions Burnout referring. It was used factorial analyses with extraction method, varimax rotation and Kaiser normalization with the intuition to define the creating dimensions of the syndrome, they were evaluated with Cronbach Alpha coefficient after extraction. The dimensions found through the factorial analyses were: emotional exhaustion, physical exhaustion and vitality. The accumulated explanation value reached 65,30% of total variation. The data socio-demographics don t justify the syndrome appearance, because the T test and ANOVA showed irrelevant values. It has been also observed that the founded dimensions were different of the Maslach sociopsychological perspective (emotional exhaustion, depersonalization and low professional realization) allowing comparison with others researches and the possibility to develop new ones with workers from different assistance areas. These new researches are important, since the syndrome refers to chronic labor stress consequences and any professional is favorable to Burnout, harmful to the company as to the collaborators

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Currently the organizations are passing for continuous cycles of changes due to necessity of survival in the work market. The administration of the future points a way to the organizations of today and tomorrow, the search of the competitiveness from loyalty and motivation of its staff. Of this form, the model of the Auditoria do Sistema Humano (ASH), developed for Spanish researchers and that now it is being applied in Brazil, contemplates a series of dimensions about Human Resources management quality in the companies and the organizational effectiveness, such as the environment where the company is inserted, the strategies, the organizational drawing, the psychological and psychosocial processes, e the reached results. In this direction, the present research analyzed the factors of job satisfaction and organizational commitment, making, also, a relation of causality between the same ones. The quantitative-descriptive research had as population the employees of twenty three nourishing industries of the State of Rio Grande do Norte (Brazil), registered in the Federacy of the Industries of the state. The collection of the data occurred for the months of October of 2005 and March of 2006, by means of the application of questionnaire of model ASH. The sample was composed for 197 employees, however it was observed presence of five outliers, that they had been excluded from the analysis of the data. To extract the dimensions of the satisfaction and the commitment and identification the factorial analysis was used, with extraction method of principal components, rotation Varimax and normalization Kaiser. The gotten dimensions had been evaluated with the calculation of the coefficient Alpha of Cronbach. The factorial analysis of the pointers of the organizational commitment and identification had extracted ten factors. Of these, four had gotten significance of the analyses inside: affective commitment, values commitment, continuance commitment and necessity commitment. The result of the analysis of the pointers of job satisfaction indicated four factors: extrinsic, motivations, relation with the friends and auto-accomplishment. To deal with the data the relation between job satisfaction and organizational commitment it was used technique of multiple regression. The correlation between commitment and satisfaction was satisfactory, detaching the affective commitment with bigger index of correlation, followed of the affective one

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Due to the occurrence of diseases in the use of structural reinforcements in composites, with presentation of concrete blanket detachment, has been identified the need to evaluate the performance of concrete reinforced with glass fiber. This study aims to evaluate these concretes by means of testing methodologies, using concrete with low resistance with structural reinforcement for confinement by preimpregnated glass fiber and traditional fiberglass blanket. The first stage of work was the development of methodologies for analysis, opting for four types, such as the acoustic survey, strength to compressive, the pull-off and ultrasound. Next, tests were carried out using the four selected methodologies in 30 of proof-of-specimens by 5x10 cm, 15 were reinforced with the traditional fiberglass blanket with 5specimens exposed to test a marine environment of marine coastline of Natal-RN and 15 were reinforced with a pre-impregnated glass fiber blanket, as well as 5specimens exposed to a test environment of the marine coastline of Natal-RN. After conducting the acoustic survey, it has been verified a lack of delaminating and air bubbles in the samples, confirming the absence of gross shortcomings in the implementation of the ribs both the traditional fiberglass blanket and in the preimpregnated fiber glass blanket. After carrying out methods of pull-off and compressive strengthening test it was observed that the reinforced proof-bodies with pre-impregnated glass blanket showed maximum stresses higher than the traditional fiberglass blanket; consequently a greater grip with the formation of a smaller area of . fracture, unlike traditional glass mat, which showed lower maximum stresses, with a greater area of fracture. It was also found that the traditional fiberglass blanket presented detachment of blanket-concrete interface, unlike the pre-impregnated fiberglass blanket, which showed a better grip on the blanket-concrete interface. In the trial of ultrasound there was no presence of cracks in the blanket-concrete interface, yielding to both blankets good compactness of the concrete. At the end of this work, they were developed and proposed two methods of testing for evaluation of reinforced concrete structures with composites, for standardization, the acoustic survey and pull-off

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The 15Kh2MFA steel is a kind of Cr-Mo-V family steels and can be used in turbines for energy generation, pressure vessels, nuclear reactors or applications where the range of temperature that the material works is between 250 to 450°C. To improve the properties of these steels increasing the service temperature and the thermal stability is add a second particle phase. These particles can be oxides, carbides, nitrites or even solid solution of some chemical elements. On this way, this work aim to study the effect of addition of 3wt% of niobium carbide in the metallic matrix of 15Kh2MFA steel. Powder metallurgy was the route employed to produce this metallic matrix composite. Two different milling conditions were performed. Condition 1: milling of pure 15Kh2MFA steel and condition 2: milling of 15Kh2MFA steel with addition of niobium carbide. A high energy milling was carried out during 5 hours. Then, these two powders were sintered in a vacuum furnace (10-4torr) at 1150 and 1250°C during 60 minutes. After sintering the samples were normalized at 950°C per 3 minutes followed by air cooling to obtain a desired microstructure. Results show that the addition of niobium carbide helps to mill faster the particles during the milling when compared with that steel without carbide. At the sintering, the niobium carbide helps to sinter increasing the density of the samples reaching a maximum density of 7.86g/cm³, better than the melted steel as received that was 7,81g/cm³. In spite this good densification, after normalizing, the niobium carbide don t contributed to increase the microhardness. The best microhardness obtained to the steel with niobium carbide was 156HV and to pure 15Kh2MFA steel was 212HV. It happened due when the niobium carbide is added to the steel a pearlitic structure was formed, and the steel without niobium carbide submitted to the same conditions reached a bainitic structure