Redução in situ de NIO durante a sinterização de misturas NI/NIO produzidas por metalurgia do pó

The nickel alloys are widely used in the production of various materials, especially those that require mechanical strength characteristics associated with resistance to corrosion, for example, the stainless steel. Another use is the production of nickel alloy sintered from powder of metallic nickel. A promising alternative for the production of sintered components of nickel with an important reduction in costs of starting material is the use of mixtures of powders of Ni-NiO. This work aimed to study in situ reduction of NiO during sintering mixtures of Ni / NiO produced by powder metallurgy. The nickel mixtures have been processed by the technique of powder metallurgy and were pre-sintered in an oven under plasma reducing atmosphere of hydrogen. Mixtures Ni +15%NiO, Ni +25%NiO and Ni +35%NiO were studied and compared with samples consisting only of metallic Ni. Dilatometric tests were performed to study the sintering conditions of the mixtures. The consolidated material was analyzed for their microstructure and microhardness. Dilatometry graphs showed that the addition of nickel oxide in all compositions the active sintering the mixtures studied. In tests of microhardness indentations were made at different points of the sample surface. All compositions showed microhardness values close to the consolidated material from metallic nickel. However, sample containing Ni+35% NiO, showed a large dispersion of the values of microhardness tests performed at different points of the sample surface. Microstructural analysis of the material showed a higher concentration of voids and the presence of oxides in the waste composition of the mixtures Ni 35% NiO. The samples containing Ni+15%NiO showed microstructural characteristics and mechanical properties similar to metallic nickel consolidated under the same conditions of the compositions studied in this work and therefore had great potential for production of sintered nickel alloys

A OAB no processo de transformação da sociedade brasileira: a seccional potiguar como espaço de redemocratização (1979-1988)

The period known as the Military Dictatorship (1964-1985) was a period of history marked by Brazil's control of state power by the Armed Forces together, this started with the Civil-Military Coup of April 1964. Was characterized as a time where political freedoms of expression and were placed in check by authoritarian and repressive measures taken by the military governments. The sectional potiguar of the Ordem dos Advogados do Brasil (OAB / RN), and the Federal Council of the institution, supported the establishment of this scam, but from the 1970s undertook measures that sought to corroborate the struggles around democracy the country, which has consolidated its image as a defender of democratic order. With the title inspired by the XII Meeting of OAB in October 1988, the research aims to analyze the participation of OAB / RN and its members within the Brazilian democratization. This analysis begins in 1979 with the participation of the entity in discussions Amnesty Policy to the promulgation of the 1988 Constitution, since the Constitution is the beginning of a full rule of law. We seek to understand the object as a space for democratization, combining the concepts of History, Memory and Politics. In the analyzes are guided theoretically by Jacques Le Goff, Pierre Nora, Maurice Halbwachs, Pierre Bourdieu and Hannah Arendt. Be rebuilt the period of democratic rule in the land potiguares birthing shares of OAB / RN, particularly in the following events: Amnesty Policy 1979, the mobilizations around the campaign of "Direct Now" and the 1988 Constitution We make use of legislation. minutes, papers and interviews built on Oral History.

Estudo de duas pseudoligas de Nb-Cu obtidas pela rota da metalurgia do pó

The Nb-Cu pseudoalloys present themselves as potential substitutes for the alloys from a well known system and already commercially applied, as the W-Cu alloys, used in applications such as heat sinks, electrical contacts and coils for the generation of high magnetic fields. Because it is an immiscible system, where there is mutual insolubility and low wettability of the liquid Cu on the Nb surface, the processing route used in this work was the Powder Metallurgy. Two Nb alloys were used, with additions of 10% and 20% in weight of Cu, and times of 20, 30 and 40 hours for the high energy milling of the starting powders. The milling evolution of the powders is presented through the characterization techniques, such as the LASER diffraction for particle size, XRD, SEM, EDS, DSC, dilatometry, TEM and chemical analysis. After the milling, portions of the loads were submitted to the annealing heat treatment. The process used for the samples consolidation was the hot pressing, which has been applied both on some milled powders samples, as on the annealed powders. Subsequent heat treatments were performed in the samples at temperatures of 1000ºC (solid phase) and 1100ºC (in the Cu liquid phase). All sets of consolidated samples, and also the two sets of the heat treated, were analyzed by XRD, SEM, EDS, density and Vickers microhardness. Moreover, other Nb powder samples with 10% and 20% in weight of Cu obtained by simple mechanical mixing, were consolidated, thermally treated and characterized with the same techniques applied to the others, and the results were compared among themselves. Despite the difficulty of consolidation and densification of the two pseudoalloys of the Nb-Cu system of this study, on the route that passes through the HEM, samples were obtained with densities around 90% of the theoretical density. And, on the processing route of which were only mixed, the values reached up to 97%. Therefore, in this work are also emphasized the processes that made possible these results.

Uso e ocupação do solo e a transformação da paisagem na faixa litorânea da Via Costeira, município de Natal/RN

The coastal area of the city of Natal due to its location and natural potentialities has been an area where we have experienced big changes in its environment, at the expense of several forms of use and human occupation. On the coast of Via Costeira beach the process of use and land occupation was structured at the end of 1970s and early 1980s, as a result of the government policy which has developmental essence, based on the settlement of plenty big enterprises by the Parque das Dunas/Via Costeira Project. This project was created to install in Natal, capital of the state, infrastructure equipment on this stretch of coastline consisted of dune fields and many parts of ecosystems which have high natural relevance and fragility that used to present a semi-isolation in the urban city, for the development of tourist activities, which is considered as a viable economic solution capable of setting right serious socioeconomic problems that had persisted there. According to what was said so far, this study aimed to analyze the forms of use and land occupation besides the change of the landscape along the Via Costeira coast in the city of Natal/RN. These changes often take place without considering the complexity and fragility of natural ecosystems involved. The geoenvironmental study was based on the geosystemic theory, thus It was possible to analyze the human interventions in the superficial aspects of landscapes holistically. The practical procedures were contemplated with literature searches, followed by field work where were fulfilled the recognition and general characterization of the area in order to investigate and analyze the main types of land occupation and its use that have taken place there since big buildings began to come out, being supported by the legislation whose laws are about protection and conservation of coastal natural resources. The research also includes the identification and evaluation of the main types of negative impacts caused due to different forms of use that induce environmental and social conflicts nearby this shore. Thus, It was carried out a spatial and multitemporal analysis from orthophotos, aerial photographs and others taken during the field work besides satellite images too. The information which is taken out from these instruments was used to draw maps related to land occupation, spatial impacts and other thematic maps. We worked on a hypothesis that the implementation of mega enterprises on Via Costeira and many different forms of intensified use by human actions, has not considered the natural aspects and restrictions of use in this area, these ones would be the main factors that brought on the suppression and degradation in this environment and consequently the transformation of the natural landscape.

Literatura: o espaço da criação e transformação identitária na sala de aula

Este trabajo pretende señalar maneras de cambiar el concepto de que los estudiantes de una clase de noveno grado de la escuela primaria en la Escuela de Estado Dr. José Gonçalves de Medeiros, en la ciudad de Acari-RN, tienen de sí mismos, de su entorno cultural y su capacidad de producción poética. Además, las referencias a las desigualdades sociales en Brasil utilizando como eje motivador de leer la poesía de Conceição Evaristo relacionada con la memoria, la lucha y la apreciación de ascendencia africana. Las aportaciones teóricas sobre la situación socio-interaccionismo, la poesía, la poesía en la escuela y la secuencia didáctica colaboran para afirmar que el estudiante de escuela pública en su discurso revela influencia del entorno familiar, social y cultural, sino también el entorno educativo, así como los primeros signos de sentimiento nacional: una mayoría excluida. Su poesía haciendo tiene sus raíces en el entorno socio-cultural y geográfica, lo que denota un principio revuelta, sin embargo, con el reconocimiento de las contribuciones de las clases desfavorecidas para la construcción de nuestro país, el estudiante tiene otras cuestiones, como el mestizo, la identificación África y el orgullo de su origen, la memoria y la cultura. Por lo tanto, se confirmam la relación rizomáticas entre las dos realidades. La elección de la investigación de intervención, en la confluencia con la investigación-acción y la investigación participativa se debe al hecho de que el intercambio de experiencias en la investigación científica es rica y significativa. Con el uso de una secuencia didáctica, cuyo eje sentir la poesía, analizar textos y hacer poesía, el estudiante es llevado a la percepción de las ventanas del universo contenida en este género literario, que es una herramienta comunicativa que ofrece numerosas posibilidades expresión, conocimiento del otro y reconocer mutuamente.

Estudo da influência da adição de níquel em alumina pela rota da metalurgia do pó

Ceramic materials alumina basis have been widely used in structural components, mainly because owning properties such as high hardness, chemical inertness and good wear resistance, however, the low toughness is a factor that compromises its use in many other applications, featuring the addition of nickel as a possible solution to this problem, in this context, this work aims to study the addition of nickel alumina using the route of powder metallurgy processing of the material. The percentage of nickel were added 2, 4 and 6 wt%; and each composition to high energy milling in a planetary mill was performed for 2, 4, 9 and 16h. Subsequently, the samples were compacted at 300 MPa and sintered in a vacuum oven at 1400⁰C for 2h. The samples were characterized as the physical and mechanical properties, observing, in general, an improvement in sinterability of the material with increasing grinding time and nickel content, and mixing with a decrease of porosity and increase of hardness, density values above 80% of theoretical were obtained. The milling time of 4 hours and addition of 2% nickel, particularly if achieved higher hardness (HV 1068.7 +/- 32.6) and density of about 99% theoretical density.

Estudo da influência da adição de níquel em alumina pela rota da metalurgia do pó

Ceramic materials alumina basis have been widely used in structural components, mainly because owning properties such as high hardness, chemical inertness and good wear resistance, however, the low toughness is a factor that compromises its use in many other applications, featuring the addition of nickel as a possible solution to this problem, in this context, this work aims to study the addition of nickel alumina using the route of powder metallurgy processing of the material. The percentage of nickel were added 2, 4 and 6 wt%; and each composition to high energy milling in a planetary mill was performed for 2, 4, 9 and 16h. Subsequently, the samples were compacted at 300 MPa and sintered in a vacuum oven at 1400⁰C for 2h. The samples were characterized as the physical and mechanical properties, observing, in general, an improvement in sinterability of the material with increasing grinding time and nickel content, and mixing with a decrease of porosity and increase of hardness, density values above 80% of theoretical were obtained. The milling time of 4 hours and addition of 2% nickel, particularly if achieved higher hardness (HV 1068.7 +/- 32.6) and density of about 99% theoretical density.

Formação do educador no curso de pedagogia de Caicó-RN: reprodução ou transformação social

ARAÚJO, Marta Maria de. Formação do educador no curso de pedagogia de Caicó-RN: reprodução ou transformação social. Porto Alegre, 1985. Dissertação (Mestrado) - Curso de Pós-graduação em Educação. Universidade Federal do Rio Grande do Sul, Porto alegre, 1985

Ação pública na formação e transformação do destino turístico de Porto de Galinhas: um estudo dos referenciais no período de 1970 a 2010

The central interest of this thesis is to comprehend how the public action impels the formation and transformation of the tourist destinies. The research was based on the premise that the public actions are the result of the mediation process of state and non-state actors considered important in a section, which interact aiming for prevailing their interests and world visions above the others. The case of Porto de Galinhas beach, in Pernambuco, locus of the investigation of this thesis, allowed the analysis of a multiplicity of actors on the formation and implementation of local actions toward the development of the tourism between the years 1970 and 2010, as well as permitted the comprehension of the construction of the referential on the interventions made. This thesis, of a qualitative nature, has as theoretical support the cognitive approach of analysis of the public policies developed in France, and it has as main exponents the authors Bruno Jobert and Pierre Muller. This choice was made by the emphasis on the cognitive and normative factors of the politics, which aspects are not very explored in the studies of public policies in Brazil. As the source of the data collection, documental, bibliographic and field researches were utilized to the (re)constitution of the formation and transformation in the site concerned. The analysis techniques applied were the content and the documental analysis. To trace the public action referential, it started by the characterization of the touristic section frontiers and the creation of images by the main international body: the World Tourism Organization, of which analysis of the minutes of the meetings underscored guidelines to the member countries, including Brazil, which compounds the global-sectorial reference of the section. As from the analysis of the evolution of the tourism in the country, was identified that public policies in Brazil passed by transformations in their organization over the years, indicating changes in the referential that guided the interventions. These guidelines and transformations were identified in the construction of the tourist destination of Porto de Galinhas, of which data was systematized and presented in four historical periods, in which were discussed the values, the standard, the algorithms, the images and the important mediators. It has been revealed that the State worked in different roles in the decades analyzed in local tourism. From the 1990s, however, new actors were inserted in the formulation and implementation of policies developed, especially for local hotelkeepers. These, through their association, establishes a leadership relation in the local touristic section, thereby, they could set their hegemony and spread their own interest. The leadership acquired by a group of actors, in the case of Porto de Galinhas, does not mean that trade within the industry were neutralized, but that there is a cognitive framework that confronts the actors involved. In spite of the advances achieved by the work of the mediators in the last decades, that resulted in an amplification and diversification of the activity in the area, as well as the consolidation at the beach, as a tourist destiny of national standout, the position of the place is instable, concerned to the competitiveness, once that there is an situation of social and environmental unsustainability

Uma cidade em transformação: a influência da atividade do crediário nas mudanças da paisagem urbana de Tenente Ananias-RN

Studies on the urban landscape and on the changes of the urban space are relevant, since they reveal the economic dynamics and the way of life in the cities. Research on small towns, in particular, can display particular aspects and by so doing broaden the comprehension of this theme. The purpose of this research is to analyze the changes in the urban landscape and in the way of life of the inhabitants of the town of Tenente Ananias-RN that have been taking place since the 1990s up to the present (2013) and which result mainly from the commercial activity of crediário. The study is, therefore, a reflection on the impact of crediário economy on the urban landscape and on the way of life of a small town located in the hinterland of the State of Rio Grande do Norte. For this reason, it was necessary to study the landscape and the way of life found in Tenente Ananias in two moments: a) before the rise of the crediário, a period of time ranging from the town‟s initial emergence until the beginning of the 1990s; b) during the progress of crediário activity, from the beginning of the 1990s, when it starts, up to the present (2013). For this research, primary data (interviews, local survey visits) and secondary data (books, articles, reports, census data) were used. As a result of this study, it was possible to conclude that crediário plays a fundamental role for the explanation of the changes taking place in Tenente Ananias-RN, especially in the urban landscape and in the way of life of people. We have attempted, through this research, to contribute to the studies of a historical, social and economic process related to the urban landscape and space of a small town in the State of Rio Grande do Norte

Estudo da sinterização de cavacos de aço ferritico

This research studies the sintering of ferritic steel chips from the machining process. Were sintered metal powder obtained from machining process chips for face milling of a ferritic steel. The chip was produced by machining and characterized by SEM and EDS, and underwent a process of high energy mill powder characterized also by SEM and EDS. Were constructed three types of matrixes for uniaxial compression (relation l / d greater than 2.5). The differences in the design of the matrixes were essentially in the direction of load application, which for cylindrical case axial direction, while for the rectangular arrays, the longer side. Two samples were compressed with different geometries, a cylindrical and rectangular with the same compaction pressure of 700 MPa. The samples were sintered in a vacuum resistive furnace, heating rate 20 °C / min., isotherm 1300 °C for 60 minutes, and cooling rate of 25 °C / min to room temperature. The starting material of the rectangular sample was further annealed up to temperature of 800 ° C for 30 min. Sintered samples were characterized by scanning electron microscopy, optical microscopy and EDS. The sample compressed in the cylindrical matrix did not show a regular density reflecting in the sintered microstructure revealed by the irregular geometry of the pores, characterizing that the sintering was not complete, reaching only the second phase. As for the specimen compacted in the rectangular array, the analysis performed by scanning electron microscopy, optical microscopy and EDS indicate a good densification, and homogeneous microstructure in their full extent. Additionally, the EDS analyzes indicate no significant changes in chemical composition in the process steps. Therefore, it is concluded that recycling of chips, from the processed ferritic steel is feasible by the powder metallurgy. It makes possible rationalize raw material and energy by manufacture of known properties components from chips generated by the machining process, being benefits to the environment

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites