53 resultados para Mastrángelo, Fabiana
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients
Resumo:
The aim of this study was to test the Ecological Apparency Hypothesis comparing two rural communities in João Câmara (RN) and Remigio (PB), in the Northeast of Brazil. This hypothesis assumes that plants are perceived, known and used by human populations according to their local availability. The most used species would be the ones that are more available in the forest (apparent), and apparently suffer greater pressure of use. Communities were consulted through semi-structured interviews. In Remigio 42 people were interviewed, and 50 in João Câmara. The importance of each species was evaluated considering the distinction between citations from current and potential uses. The ethnobotanical information was associated with phytosociological parameters collected by the point-centered quarter method in forested areas, where 50 transects were distributed in each community, and 4,000 individuals sampled in total. Based on the interviews, 58 useful species were recorded, 42 genera and18 families. In the phytosociological study 30 species, 22 genera and 12 families in João Câmara, In Remígio were identified 34 species, 22 genera and nine families.The species were grouped into 11 categories of use. The ecological appearance was confirmed only in the João Câmara, which best explained the relationship between local availability and use of timber resources. Positive correlations were observed also between the technology category VUpotential and dominance. The point-centered quarter was efficient to test appearance, however, further studies through the point-centered quarter method are recommended
Resumo:
Recent years have seen a significant growth in surface modifications in titanium implants, resulting in shorter healing times in regions with low bone density. Among the different techniques, subtraction by chemical agents to increase oxidation has been applied for surface treatment of dental implants. However, this technique is generally unable to remove undesirable oxides, formed spontaneously during machining of titanium parts, raising costs due to additional decontamination stages. In order to solve this problem, the present study used plasma as an energy source to both remove these oxides and oxidize the titanium surface. In this respect, Ti disks were treated by hollow cathode discharge, using a variable DC power supply and vacuum system. Samples were previously submitted to a cleaning process using an atmosphere of Ar, H2 and a mixture of both, for 20 and 60 min. The most efficient cleaning condition was used for oxidation in a mixture of argon (60%) and oxygen (40%) until reaching a pressure of 2.2 mbar for 60 min at 500°C. Surfaces were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), adhesion and cell proliferation. SEM showed less cell spreading and a larger number of projections orfilopodia in the treated samples compared to the control sample. AFM revealed surface defects in the treated samples, with varied geometry between peaks and valleys. Biological assays showed no significant difference in cell adhesion between treated surfaces and the control. With respect to cell proliferation, the treated surface exhibited improved performance when compared to the control sample. We concluded that the process was efficient in removing primary oxides as well as in oxidizing titanium surfaces
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
The increasing of pollution in aquatic ecosystems in the last decades has caused an expansion of eutrophication and loss of water quality for human consumption. The increase of frequency and intensity of cyanobacteria blooms have been recognized as a major problem connected to water quality and eutrophication. The knowledge of environmental factors controlling these blooms is a key step towards the management for recovering aquatic ecosystems from eutrophic conditions. Primary productivity in aquatic ecosystems is dependent on light and nutrients availability. In the present work we evaluated the relative importance of the concentration of major nutrients, such as phosphorus and nitrogen, and light for phytoplankton growth in the main water reservoir of Rio Grande do Norte State, named Engenheiro Armando Ribeiro Gonçalves (EARG), which is an eutrophic system, dominated by potentially toxic cyanobacteria populations. Limitation of phytoplankton growth was evaluated through bioassays using differential enrichment of nutrients (N and/or P) under two light conditions (low light and high light) and monthly monitoring of chlorophyll-a and nutrients (total nitrogen and phosphorus) concentrations, and water transparency (Secchi depth) at the pelagic region. Our results confirm that EARG reservoir is an eutrophic system with a low water quality. Results of bioassays on the growth of phytoplankton limitation (N or P) were conflicting with the results predicted by the TN:TP ratios, which indicates that these ratios were not a good indicator of algal growth limitation. Nitrogen was the limiting nutrient, considering both frequency and magnitude. Light and hidrology affected phytoplankton response to nutrient enrichment. The extreme eutrophic conditions of this reservoir, dominated by cyanobacteria blooms, demand urgent managing strategies in order to guarantee the multiple uses for this system, including water supply for human population. Although nitrogen is the limiting nutrient, an effective management program must focus on the reduction of both phosphorus and nitrogen input
Resumo:
Muitos países subdesenvolvidos são caracterizados por uma significativa diversidade sociocultural e por uma acentuada pobreza em grande parte da população, que fazem uso da caça de animais como uma fonte alternativa de alimento e para outros fins. O estudo objetivou investigar se a distância das populações humanas da zona rural em relação à zona urbana e fatores socioeconômicos podem ser preditores de um maior conhecimento sobre as espécies da fauna utilizadas. Além disso, o estudo objetivou também testar uma ferramenta capaz de gerar uma lista da fauna prioritária para a conservação local a partir do conhecimento local. Os dados foram coletados por meio de 30 entrevistas utilizando formulários semi-estruturados em quatro comunidades rurais no município de Pedro Avelino, RN. Foram calculados o fator de consenso dos informantes (ICF), a importância relativa (IR) e o nível de fidelidade (FL). Adicionalmente, foi calculado o índice de Shannon-Wiener para as categorias de uso: estimação, alimentar, medicinal e para a multiplicidade de uso por informante. Os entrevistados reconhecem 83 espécies pertencentes a 45 famílias de animais. As espécies citadas pertencem a seis grandes grupos taxonômicos: aves, mamíferos, répteis, anfíbios, peixes e insetos. O conhecimento sobre a utilização de animais para as categorias de uso definidas neste trabalho não mostrou relação significativa com os fatores socioeconômicos e nem com a distância das comunidades da zona rural para a zona urbana de Pedro Avelino. Os resultados sugerem, portanto, que a pobreza nivela o conhecimento sobre o uso da fauna independente da distância que as comunidades encontram-se da zona urbana. As listas geradas permitirão direcionar estudos ecológicos mais aprofundados visando à conservação das espécies do bioma Caatinga. Desta forma, é importante considerar as interações existentes entre as pessoas e os animais para melhor entender a dinâmica de utilização e fornecer, assim, subsídios para a conservação das espécies.
Resumo:
The use of animals is a common activity but it can be really variable between human populations. This work analyzed the knowledge about useful animal species between human communities in Caatinga and Atlantic Forest considering the influence of socioeconomics and environmental factors on the species selection. Forty people were interviewed in Caraúbas community (Atlantic Forest) and thirty were interviewed in Barrocas community (Caatinga). A total of 193 animals were cited. The communities showed a low degree of similarity (20%) and the general diversity of mentioned species was significantly bigger in Caraúbas. Men cited a diversity of species greater than women for food category in Caraúbas and pet category in Caraúbas and Barrocas. Women cited greater species diversity for medicinal use in Caraúbas. In general, in both communities, the age group >60 years showed a greater knowledge than the others. The multiple regression analysis showed the age as the only socioeconomic factor which influenced significantly the knowledge about animals for the food category in both communities. Considering the richness of known species, there were differences only between gender for sum of uses and food category in Caraúbas and for the pet category in Barrocas with men showing a greater knowledge than women. The results showed that local environmental differences are fundamental at the species selection but they also showed that within communities there are other factors like gender and age that tend to influence the knowledge about species. It is important to consider cultural, economic, social and environmental factors to understand better the interactions between people and animals so that this information can be used to facilitate the implementation of conservation measures
Resumo:
O uso da biodiversidade pelo homem leva a alterações no funcionamento dos ecossistemas, podendo ainda levar a perda de resiliência. Pode-se definir resiliência como a capacidade de um sistema absorver um distúrbio e reorganizar-se, enquanto submetido a mudanças, mantendo a mesma estrutura e funcionamento. Em um sistema social, entende-se como a capacidade dos usuários de recursos naturais de enfrentar e adaptar-se as mudanças nas regras que regem o uso e acesso a estes. Alterações na resiliência, tanto ecológica quanto social, podem ser resultantes das ações de exploração e manejo destes recursos. Assim, torna-se essencial compreender como funcionam as estratégias de manejo e sua interação com a resiliência sócio-ecológica, permitindo a auto-avaliação das ações e possíveis modificações das mesmas. Neste projeto, propõe-se comparar a resiliência sócio-ecológica de três Unidades de Conservação (UCs) de uso sustentável: Reserva de Desenvolvimento Sustentável (RDS) Ponta do Tubarão, localizada no estado do Rio Grande do Norte; e as Reservas Extrativistas do Batoque e Prainha do Canto Verde, ambas localizadas no estado do Ceará. Em cada área de estudo serão escolhidas comunidades pesqueiras, permitindo a comparação entre elas. A partir destas comunidades, alguns aspectos relacionados ao uso dos recursos serão analisados, como atividade pesqueira, dieta e modo de vida. Os dados serão coletados através de questionários semi-estruturados, contendo questões baseadas em aspectos sociais, econômicos e ecológicos. Os resultados obtidos servirão de indicadores para a resiliência ecológica (informações obtidas com base na atividade pesqueira) e social (informações obtidas com base no acompanhamento da dieta e análise do modo de vida). Apesar da similaridade ecológica entre as áreas de estudo, algumas estratégias de manejo distintas em função da categoria da UC podem apresentar diferentes resultados sobre a resiliência sócio-ecológica. Desta forma, compreender como a resiliência sócio-ecológica se comporta, dentro dos sistemas de manejo estudados, permitirá avaliar a influência destes dois tipos de UCs (RDS e RESEX) na promoção da sustentabilidade ecológica e/ou social
Resumo:
Ethnobiology studies Local Ecological Knowledge (LEK) as well as the use and management of natural resources by local communities in order to understand how the environment is perceived, known and classified by human groups. In fishing communities, LEK adds empirical information about the biology of aquatic species and complements scientific findings, especially when it is difficult to obtain factual information during studies on cetaceans, whose behavior is essentially underwater. Cetaceans (whales and dolphins) are constantly threatened by human activities, especially by accidental capture of small coastal species, as in the case of the estuarine dolphin (Sotalia guianensis), object of this study. Ethnobiological researches in fishing communities are of great importance and can clarify aspects of the biology and conservation of this species. Although extensively studied throughout its distribution range, there are still gaps in the knowledge about S. guianensis. Therefore, fishers local ecological knowledge becomes an additional tool to get and confirm information about S. guianensis. This study evaluated the LEK of artisanal fishers who are daily exposed to local population of S. guianensis, through the use of semistructured interviews (N=116). The interviewed fishers were asked about the biology and popular classification of S. guianensis and about possible interactions between this dolphin and them. The studied communities were located in Tibau do Sul (n=39), Pipa (n=36) and Baía Formosa (n=41), all on the south coast of Rio Grande do Norte, Brazil. The study was based on the assumption that differences in fishers LEK among those communities would be caused by both the variety of fishing environments (lagoon/estuary and ocean) and the intensity of tourism activities. Fishers knowledge is expressive and differed among the studied communities depending on the topic investigated. Fishers correctly reported the habitat, distribution, seasonality and behavioral particularities of S. guianensis. Tourism mainly affected the naming of the species. The study results also suggest that marine fishers have greater knowledge about the species than the estuarine/lagoon ones. Local populations accumulate empirical knowledge according to their environment. Hence, it is important to take into account both empirical knowledge and popular participation in management systems, in order to maintain information sharing among communities
Resumo:
When scientists study methods, theory and standards in an inseparable form, he is facing a paradigm. Throughout the development of a determined science, paradigms can change by changing the methods, objective and standards of research. Fisheries science is changing the paradigm moving from the paradigm of maximization in the use of resources, quantified by the index of the catch, which was influenced by evolutionary concepts such as Optimal Foraging Theory, to the sustainability paradigm that seeks its foundation in the fishery ecosystem perspective. The goal of this study was to review methods, theory and the history of ecosystem indexes of fishery science that attempts to determine sustainability of fishery resources from the data capture. Ecosystems indexes by themselves may not be useful to measure the sustainability of fishing because they focus only on the environmental or ecological side of the sustainability tripod. Probably to measure the sustainability of fishing these indexes should include in the future the Payments for Ecosystem Services and Social Resilience. Thus the methods and theories are in constantly changing within science to meet the most current paradigm
Resumo:
This work, named Teaching conditions: a study in municipal schools of Currais Novos RN (2009 to 2012) aims to analyze the status of teaching in schools in the municipality of Currais Novos RN in the period ranging from 2009 - 2012, considering infrastructure, initial and continued training and intensification and casualization of teaching factors in the context of the 1990s educational reformations. It, also, assumes that teaching is a constitutive part of capitalist society, and has been reconfigured with based on the new requirements demanded by the labor market. In order to conduct this study the considered data included the survey research Teaching Work in Basic Education in Brazil (2009 to 2010) , held in seven Brazilian states being: Pará, Rio Grande do Norte, Minas Gerais, Goiás, Paraná, Santa Catarina and Espírito Santo. Specifically selected for deepening of the study, there were schools in the municipality of Currais Novos in which semi-structured interviews were performed with teachers of the said municipality. This research is constituted of a qualitative and quantitative approach whose survey instruments adopted were, namely: documental research, literature review, interviews and surveys. The obtained data analysis allows us to infer that the teaching work performed by teachers in the states which participated in the survey has been influenced the changes in the labor market and educational reformations and has been taking on characteristics such as flexibility, tendency to precariousness and intensification; and this trend is also present in schools that were surveyed in the municipality of Currais Novos. As pertaining to the teachers conditions in classroom, these signs are more evident, considering that they had their duties and responsibilities extended beyond the classroom environment. The data also show that in general working conditions of teachers in national, state and local levels are unprofitable and heterogeneous, increasingly deepening the gap between school units and education networks. Therefore, the implantation of public policies that enhance the teaching work and improve their working conditions in all dimensions that directly interfere in their work are crucial
Resumo:
It is presented the analysis of a retaining wall designed for the basement of a residential building, located in Natal/RN, which consists in a spaced pile wall, anchored by tiebacks, in sand. This structure was instrumented in order to measure the wall s horizontal movements and the load distribution throughout the anchor fixed length. The horizontal movements were measured with an inclinometer, and the loads in the anchors were measured with strain gages, installed in three places throughout the anchor fixed length. Measurements for displacement were done right after the implementation of each stage of the building and right after the conclusion of the building, and the measurements for loads in the anchors were done during the performance test, at the moment of the locking off and, also, right after the conclusion of the building. From the data of displacement were obtained velocity and acceleration data of wall. It was found that the time elapsed on braced installation was decisive in the magnitude of the displacements. The maximum horizontal displacement of wall ranged between 0,18 and 0,66% of the final depth of excavation. The loads in the anchors strongly reduced to approximately half the anchor fixed length, followed an exponential distribution. Furthermore, it was found that there was a loss of load in the anchors over time, reaching 50% loss in one of them
Resumo:
In this work we use Interval Mathematics to establish interval counterparts for the main tools used in digital signal processing. More specifically, the approach developed here is oriented to signals, systems, sampling, quantization, coding and Fourier transforms. A detailed study for some interval arithmetics which handle with complex numbers is provided; they are: complex interval arithmetic (or rectangular), circular complex arithmetic, and interval arithmetic for polar sectors. This lead us to investigate some properties that are relevant for the development of a theory of interval digital signal processing. It is shown that the sets IR and R(C) endowed with any correct arithmetic is not an algebraic field, meaning that those sets do not behave like real and complex numbers. An alternative to the notion of interval complex width is also provided and the Kulisch- Miranker order is used in order to write complex numbers in the interval form enabling operations on endpoints. The use of interval signals and systems is possible thanks to the representation of complex values into floating point systems. That is, if a number x 2 R is not representable in a floating point system F then it is mapped to an interval [x;x], such that x is the largest number in F which is smaller than x and x is the smallest one in F which is greater than x. This interval representation is the starting point for definitions like interval signals and systems which take real or complex values. It provides the extension for notions like: causality, stability, time invariance, homogeneity, additivity and linearity to interval systems. The process of quantization is extended to its interval counterpart. Thereafter the interval versions for: quantization levels, quantization error and encoded signal are provided. It is shown that the interval levels of quantization represent complex quantization levels and the classical quantization error ranges over the interval quantization error. An estimation for the interval quantization error and an interval version for Z-transform (and hence Fourier transform) is provided. Finally, the results of an Matlab implementation is given
Resumo:
Considering the constant evolution of technology in growth and the need for production techniques in the ceramics area to move forward together, we sought in this study, the research and development of polymeric precursor method to obtain inorganic ceramic pigments. Method that provides quality to obtain the precursor powders of oxides and pigments at the same time, offers time and cost advantages, such as reproducibility, purity and low temperature heat treatment, control of stoichiometry. This work used chromium nitrate and iron nitrate as precursors. The synthesis is based on the dissolution of citric acid as a complexing agent, addition of metal oxides, such as ion chromophores; polymerization with ethylene glycol and doping with titanium oxide. Passing through precalcination, breakdown, thermal treatments at different temperatures of calcination (700 to 1100 oC), resulting in pigments: green for chromium oxide deposited on TiO2 (CrTiO3) and orange for iron oxide deposited on TiO2 ( FeTiO3). Noticing an increase of opacity with increasing temperature. Were performed thermal analysis (TG and ATD) in order to evaluate its thermodecomposition. The powders were also characterized by techniques such as XRD, revealing the formation of crystalline phases such as iron titanate (FeTiO3) and chrome titanate (CrTiO3), SEM, demonstrating formation of rounded particles for both oxides and Spectroscopy in the UV-Visible Region, verifying the potential variation and chromaticity os pigments. Thus, the synthesized oxides were within the requirements to be applied as pigments and shown to be possible to propose its use in ceramic materials