Análise tribológica das malhas multifuncionais obtidas por multicamadas

The present work consists in the analysis of tribologycal properties of basic and multifunctional knitted fabrics. This knowledge has fundamental importance for the textile industry since it can quantify, in an objective way, the tactil. The fabrics used were characterized by friction and mechanical tests for determining the viscoelastic region, wear resistance and friction coefficient of the fabrics used. The stress-strain curve was obtained by the method Kawabata, KES-FB1. Wear tests performed with the aid of equipment Martindale. The measurement of friction coefficient, two methods were used and analyzed comparatively. The first was a method already established worldwide known as KES-FB4 and the second was an innovative method called FRICTORQ, developed by the University of Minho. These two methods were compared taking into account the relative motion between the tribologycal pairs are different from each method. While the first motion is translational, the second is rotational. It was formal that the knitted had a multifunctional fabrics tribologycal performance which was better than the basic knitted fabrics, as the viscoelastic region, was laager highlighting a multifunctional structure, with greater wear resistance mainly on the back side of the knitted fabrics and lower friction coefficient. Performing a comparative analysis between two methods used to measure the friction coefficient, it was formal that both methods were consistent in terms of results. In operational terms, the FRICTORQ showed ease of operation and increased reproducibility of results

Descarga em barreira dielétrica: construção de um reator DBD e caracterização mediante análises ópticas e elétricas do plasma produzido

The plasma produced by Dielectric Barrier Discharge (DBD) is a promising technique for producing plasma in atmospheric pressure and has been highlighted in several areas, especially in biomedical and textile industry, this is due to the fact that the plasma generated by DBD not reaches high temperatures, enabling use it for thermally sensitive materials. But still it is necessary the development of research related to understanding of the chemical, physical and biological interaction between the non-thermal plasma at atmospheric pressure with cells, tissues, organs and organisms. This work proposes to develop equipment DBD and characterize it in order to obtain a better understanding of the process parameters of plasma production and how it behaves under the parameters adopted in the process, such as distance, frequency and voltage applied between electrodes. For this purpose two techniques were used to characterize distinct from each other. The first was the method of Lissajous figures, this technique is quite effective and accurately for complete electrical characterization equipment DBD. The second technique used was Optical Emission Spectroscopy (EEO) very effective tool for the diagnosis of plasma with it being possible to identify the excited species present in the plasma produced. Finally comparing the data obtained by the two techniques was possible to identify a set of parameters that optimize the production when combined DBD plasma atmosphere in the equipment was built precisely in this condition 0.5mm-15kV 600Hz, giving way for further work

Competitividade de diferentes atmosferas de plasma sobre as propriedades hidrofílicas em tecidos de polilático

Os polímeros biodegradáveis, como o poliácido láctico (PLA) apesar de consolidado nos campos farmacêuticos, médico e biomédico como biomateriais úteis para aplicações variadas, porém, depende da necessidade de funcionalizar a sua superfície estudando suas propriedades tais como hidrofilidade e hidrofobicidade favorecendo a interação do polímero com os materiais de aplicação farmacêutica, médica e biomédica. Este trabalho tem como objetivo produzir um material com características diferentes em cada um de seus lados, sendo um lado hidrofílico e o outro hidrofóbico. O substrato têxtil utilizado neste estudo foi um tecido de malha de composição 100% PLA que é biodegradável e biocompatível, o que possibilita sua aplicação na área biomédica. Para modificação superficial foi utilizado o tratamento a plasma de baixa pressão. A técnica de modificação de superfície por plasma foi escolhida por ser uma tecnologia limpa, anticorrosiva e não tóxica ao contrario de muitos processos químicos convencionais utilizados na indústria têxtil, além disso, não afeta as propriedades de massa do substrato. Neste estudo, um lado da superfície do substrato foi tratado com plasma oxigênio, argônio e nitrogênio, para o trabalho de melhoria da hidrofilidade da superfície e metano para a hidrofobicidade da amostra. A espectroscopia de emissão ótica (OEE) foi utilizada para fazer o diagnóstico das espécies do plasma durante o tratamento. Após o tratamento a plasma as amostras foram caracterizadas por medidas de ângulo de contato, microscopia eletrônica de varredura (MEV), Espectroscopia de fotoelétrons de raios-X (XPS), Infravermelho com Transformada de Fourier (FTIR) de reflexão total atenuada (ATR), medidas da área de espalhamento do líquido e arraste vertical. Onde foi caracterizado o aumento e diminuição da molhabilidade das amostras tratadas por plasma bem como as variáveis que contribuíram para tal efeito. O tratamento das amostras de PLA com O2 + CH4 apresenta comportamento hidrofílico no lado tratado com O2, apresentando aumento de rugosidade e grupos funcionais e no lado tratado com CH4, apresentando a formação de um filme polimérico formado sobre a superfície da amostra. O tratamento com N2 + CH4 apresenta comportamento hidrofóbico, porém com variações no fluxo do CH4 tem-se um controle da molhabilidade na superfície das amostras, podendo ir de hidrofóbico a hidrofílico, neste tratamento as amostras apresentaram pequenas diferenças de molhabilidade entre os lados tratados com plasma de N2 e com plasma de CH4

Avaliação econômica dos incentivos fiscais e financeiros: uma análise das empresas industriais têxteis localizadas no Rio Grande do Norte, no período de 1999 a 2003

This study has as main objective to verify the effect of the tax and financial incentives granted by the brazilian states, specially in the reduction of ICMS on the investment decision of the entities, which in the last years led to the companies to decide new projects in based on the region that presented the better infrastructure beyond lesser tributary expense. For in such was made an economic valuation of the companies with focus in the beneficiary s optics using an adaptation of the Discounted Cash Flow method to measure the impact of the tax incentives in the value of the companies, this study selected the textile industry segment located in the State of Rio Grande do Norte, Brazil. The results indicated that such incentives created addition in the value of the companies, however the inexistence of incentives would not be enough to a negative decision of investment in the Rio Grande do Norte. The smallest difference between the value with and without incentive observed was 8.9%, and the biggest 31.7%, and the average of value aggregation with the tax incentives represented 18.9%

A cadeia produtiva de gás natural no Rio Grande do Norte e perspectivas para o setor

The paper demonstrates how it is organized production chain of natural gas in Rio Grande do Norte and highlights some prospects for this sector. The study is backed by elements to understand the process of innovation as the driving force of capitalist dynamics as well as the features of the Brazilian economy in the years 1990 and 2000 that indicated the development of natural gas production in the energy matrix Brazil. It was found that the state has potiguar possibilities for structuring an energy based on elements from the region and with prospects of becoming self-sufficient in electricity, where natural gas has a share of participation in this segment. The automotive and industrial are the biggest consumers of this input. With emphasis on the textile industry. Signaling to a broad horizon of supply, this sector will depend on their investments in research and Deficient, and the policy adopted by government to develop the consumer market

Feira livre e circuitos da economia urbana: um estudo da feira da Pedra, em São Bento (PB)

The Feira da Pedra is an extension of the open fair of São Bento in the State of Paraiba. It is a system of trade in textile goods produced by textile industry in manufacturing of hammocks and derivatives of this industry, present in some cities in the state of Paraiba and Rio Grande do Norte, as a survival strategy, inserted in the list of tertiary and retail of the urban economics of this city. It is thereby aimed to discuss about the urban economics, reflecting on the open fair system from the two circuits of urban economy, mainly in the context of the dynamics of the current period of geographic space, the technical-scientific-informational period, as the specific empirical object, the Feira da Pedra of São Bento (PB). For this, this research was carried out in two stages of operation: a) surveys of secondary data and b) primary data collection which were reported an operational triad: I) literature; II) documentary research, and III) research of field. The presence of the Feira da Pedra in São Bento has shown us one of the most important characteristics of this city, in order to present major economic, social and cultural benefits to the local population, and contribute to (re) production of sertanejo space, making lower part of the circuit of its urban economy. This activity has entailed several dynamics for urban space in this city, mainly because of attracting large numbers of people, carrying typical actions of its relationship with the urban space are são-bentense and built environment. Thus, its importance is not only a local and regional phenomenon, but also a cultural reference of a place in the geographical area of many paraibanos and norte-rio-grandenses subjects, as the case of this activity has brought to its weekly routine, this product resulting from the textile working of this area of Sertão Paraibano and Seridó Potiguar

Estudo da participação das espécies fortemente oxidantes produzidas durante a oxidação eletroquímica de corantes usando eletrodo de diamante dopado com boro: função das propriedades eletroquímicas do eletrodo e condições experimentais

The textile industry is one of the most polluting in the world (AHMEDCHEKKAT et al. 2011), generating wastewater with high organic loading. Among the pollutants present in these effluents are dyes, substances with complex structures, toxic and carcinogenic characteristics, besides having a strong staining. Improper disposal of these substances to the environment, without performing a pre-treatment can cause major environmental impacts. The objective this thesis to use a technique of electrochemical oxidation of boron doped diamond anode, BDD, for the treatment of a synthetic dye and a textile real effluent. In addition to studying the behavior of different electrolytes (HClO4, H3PO4, NaCl and Na2SO4) and current densities (15, 60, 90 and 120 mA.cm-2 ), and compare the methods with Rhodamine B (RhB) photolysis, electrolysis and photoelectrocatalytic using H3PO4 and Na2SO4. Electrochemical oxidation studies were performed in different ratio sp3 /sp2 of BDD with solution of RhB. To achieve these objectives, analysis of pH, conductivity, UV-visible, TOC, HPLC and GC-MS were developed. Based on the results with the Rhodamine B, it was observed that in all cases occurred at mineralization, independent of electrolyte and current density, but these parameters affect the speed and efficiency of mineralization. The radiation of light was favorable during the electrolysis of RhB with phosphate and sulfate. Regarding the oxidation in BDD anode with different ratio sp3 /sp2 (165, 176, 206, 220, 262 e 329), with lower carbon-sp3 had a longer favoring the electrochemical conversion of RhB, instead of combustion. The greater the carbon content on the anodes BDD took the biggest favor of direct electrochemical oxidation

Avaliação das propriedades das fibras de algodões coloridos naturalmente e ecologicamente corretas cultivados nos assentamentos do município de Guamaré/RN

In this work evaluate the technical characteristics of the fibers grown in settlements Guamaré, colored cotton seeds were donated existing in the Germplasm Bank of Embrapa Cotton. We sought through the breeding program, raising the resistance, fineness, length and uniformity of cotton fibers, as well as stabilize the staining of fibers in the BRS Topaz, BRS Brown and BRS Green shades and raise their productivity in the field. First, the individual selections to test progeny seeds, and thereafter the hybridization method followed by family selection to obtain variations in the color tones were performed. The BRS Topaz, BRS Brown and BRS Green varieties were produced, analyzed and compared with existing cottons in the region which is the White cotton. The properties amount of impurities and neps, length, length uniformity, short fiber content, fineness and tensile strength of the fibers were sized in Classifiber, NATI, Pressley and Micronaire devices. 10 trials each with 10 tests for all four fiber types were carried out. The White and Topaz fibers showed greater length (32-34mm) and greater resistance (7.94 lb/mg and 7.97 lb/mg respectively) and showed finesse with lower micronaire index 3,71μg/inch and 3, 73μg/inch and a low rate of short fibers. The results were very promising for the use of genetically improved cotton in the manufacturing of fabric and yarn in the textile industry. The fibers were brown colored cotton used in the manufacture of a composite fiber with thermoplastic resin

Avaliação do tratamento eletroquímico (direto e indireto) como alternativa de degradação do corante azul de metileno

Textile industry has been a cause of environmental pollution, mainly due to the generation of large volumes of waste containing high organic loading and intense color. In this context, this study evaluated the electrochemical degradation of synthetic effluents from textile industry containing Methylene Blue (AM) dye, using Ti/IrO2-Ta2O5 and Ti/Pt anodes, by direct and indirect (active chlorine) electrooxidation. We evaluated the influence of applied current density (20, 40 and 60 mA/cm2 ), and the presence of different concentrations of electrolyte (NaCl and Na2SO4), as well as the neutral and alkaline pH media. The electrochemical treatment was conducted in a continuous flow reactor, in which the electrolysis time of the AM 100 ppm was 6 hours. The performance of electrochemical process was evaluated by UV-vis spectrophotometry, chemical oxygen demand (COD) and total organic carbon (TOC). The results showed that with increasing current density, it was possible to obtain 100 % of color removal at Ti/IrO2-Ta2O5 and Ti/Pt electrodes. Regarding the color removal efficiency, increasing the concentration of electrolyte promotes a higher percentage of removal using 0,02 M Na2SO4 and 0,017 M NaCl. Concerning to the aqueous medium, the best color removal results were obtained in alkaline medium using Ti/Pt. In terms of organic matter, 86 % was achieved in neutral pH medium for Ti/Pt; while a 30 % in an alkaline medium. To understand the electrochemical behavior due to the oxygen evolution reaction, polarization curves were registered, determining that the presence of NaCl in the solution favored the production of active chlorine species. The best results in energy consumption and cost were obtained by applying lower current density (20 mA/cm2 ) in 6 hours of electrolysis.

Gestão da cadeia de suprimento e vantagem competitiva: uma análise em setores industriais a partir da visão relacional

This work has as its main purpose to investigate the contribution of supply chain management in order to obtain competitive advantage by companies from the textile industry and from Ceará footwear industry, focusing its analysis mainly in the interorganizational relations (dyadic). For this, the theoretical referential contemplates different explanatory streams of the competitive advantage, detaching the relational perception of the resources theory, as well as, the main presuppositions of the supply chain management which culminates with the development of an analysis sample that runs the empirical study; the one which considers an expanded purpose of the supply chain which includes the government and the abetment institutions as institutional environment representatives. Besides supply chain management consideration as a competitive advantage source, the work also tried to identify other possible competitive advantage sources for the companies of the investigated sectors. It represents a study of multiple interpretive cases, having four cases as a total; meaning two cases in each one of the sectors, which used as a primary data collecting instrument a semi-structured interview schedule. Different methods were used for the data analysis, the content analysis and the constant comparison methods, the analytical procedure originated from the grounded theory research strategy, which were applied the Atlas/ti software recourse. Considering the theoretical referential and the used analysis sample, four basic categories of the work were defined, including its respective proprieties and dimensions: (1) characteristics concerning to the relationship with the supplier; (2) the company relations with the government; (3) the company relations with the abetment institutions and; (4) obtaining sources of competitive advantage. In general, the applied research in the footwear sector revealed that in the relationships of the researched companies related to its suppliers, there is a predominance of the partnership system and the main presuppositions of the supply chain management are applied which contributes for the acquisition of the relational competitive advantage; while in the textile sector, only some of these presuppositions are applied, with little contribution for the relational competitive advantage. The main resource which was accessed by the companies in both sectors through its relationships with the government and the abetment institutions are the tax incentives which, for the footwear companies, contribute for the acquisition of the temporary competitive advantage in relation to the contestants who do not own productive installations in the Northeast region, it also conducts to a competitive parity situation in relation to the contestants who own productive installations in the Northeast region and to the external market contestants; while for the companies of the textile sector, the tax incentives run the companies to a competitive parity situation in relation to its contestants. Furthermore, the investigated companies from the two sectors possess acquisition sources of the competitive advantage which collimate with different explanatory streams (industrial analysis, resources theory, Austrian school and the dynamic capabilities theory), although there is a predominance of the product innovation as a competitive advantage source in both sectors, due to the bond of these with the fashion tendencies

Contribuições da inserção musical para a qualidade de vida no trabalho em ambiente laboral fabril

The present thesis aimed at understanding how the insertion of music in the work environment contributes to achieving Quality of Work Life. - QWL, under the perspective of biopsychosocial and organizational well-being. As to music insertion we considered the theoretical-empirical perception about how music is inserted at work and its functions on such place. The context where the study was taken was the manufacturing area of a major textile company, located in Natal, state of Rio Grande do Norte, Brazil, in which music is used during labor activities. The only study case was the research strategy adopted, with exploratory and descriptive purposes. The primary data were collected through the focus group technique, applied to the collaborator in the manufacturing sector. The semi-structured interview was done as a complementary tool, directed to the supervisor in that sector. Respecting the theoretical saturation criterion, we formed four focus groups, each one composed of eight members randomly selected, among the seventy-six collaborators in the sector. The data were analyzed qualitatively, through the content analysis technique, more specifically the category analysis. We identified twenty-eight QWL attributes. Six of them were found present in the four focus groups and in the interview. Among these ones, the attribute of Interpersonal Relationship at Work, contemplating the Psychological and Organizational dimensions, was the only one anticipated in four out of fifteen theoretical models here listed. The attribute Music at Work Environment could be inserted in the four QWL dimensions, highlighting the power and relevance of this attribute for the research participants. The way music has been inserted in the labor environment contributes to promoting well-being at work, which goes against theoretical conceptions, especially when it comes to musical genre. We identified nine functions of music at work, among which, Improving Work Conditions, Improving Interpersonal Relationship at Work and Favoring Motivation for Work had to be emphasized for being associated to three QWL attributes. In the total, we highlighted seven associations. The most affected QWL dimension through the insertion of music at work was the Psychological one, followed by the Organizational one. We conclude that music insertion provides biological, social and, above all, psychological and organizational well-being to the contributors, thus contributing to obtaining QWL at the labor environment researched. However, we should consider the context and proceed to periodical plans and adjustments in the way of music insertion so as to avoid health and well-being problems to those people at work

Avaliação ecotoxicológica de efluentes industriais utilizando Danio rerio Hamilton-Buchanan, 1822 (TELEOSTEI, CYPRINIDAE)

The industrial effluents are one of the main sources of water pollution. For an appropriate characterization and control of their discharges, the most efficient strategy is the integrated use of chemical, physical and ecotoxicological analyses. The aims of this study were to asses the efficiency of the treatment plant of a textile industry performing acute toxicity tests and physical-chemical analyses of the effluents before and after the treatment, besides evaluate the toxicity of the effluents of the Treatment System of Liquids Effluents (Sistema de Tratamento de Efluentes Líquidos - SITEL) of Distrito Industrial de Natal (DIN) and some of their physical-chemical variables. The species used in the ecotoxicological tests was the fish Danio rerio. The results showed that the treatment plant reduced significantly (around 50%) the toxicity of the raw textile effluent in only three of the seven tests but, in general, it promoted the reduction of the physical-chemical parameters analyzed. The toxicity and the physical-chemical factors of the effluents of SITEL of DIN varied among the tests and show the importance of monitoring their discharges in the Potengi river, one of the most important rivers of the Rio Grande do Norte state

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Caracterização do efluente líquido no processo de beneficiamento do índigo têxtil

The great diversity of the textile industries activities causes the formation of wastewaters with high complex characteristics during the productive process, according to the industrial process used. The principal aim of the present work is the characterization of the wastewater from the textile industry that process the indigo, located in the Industrial District of Natal-RN, to know the contaminante load of each stage of the process and the framing of the wastewater with the standards of act of receiving of the System of Treatment of Wastewater of the Industrial District of Natal-RN SITEL-DIN, operated for the Company of Waters and Sewers of the RN CAERN. It was analyzed the following properties and pollutants agents: temperature; pH; alcalinity; color; COD (Chemical Oxygen Demand); total and suspended solids; heavy metals, thermotolerants coliformes, turbidity, dissolved oxygen and electrical conductivity. As conclusion it is distinguished that the wastewater did not get resulted satisfactory, according to comparisons with other sources, in only three parameters: turbidity, dissolved oxygen and electrical conductivity, however none of these parameters is criteria of acts of receiving of the SITEL-DIN,therefore the wastewater if finds inside of normality. After the analysis of the obtained results it was verified that SITEL-DIN is indispensable for completing the wastewater treatment

Fabricação de malha de trama utilizada como pré-formas na indústria de compósitos e avaliação das propriedades mecânicas

In the manufacture of composite, textile materials are being used as reinforcement. Generally, the combination of the matrix with the textile material in the form of fibres or yarns is used depending on their distribution in the web. In the present work, in place of fibres or yarns, a knitted structure in the form of the final product which is defined as preform. The preform is weft knit manufactured with polyester filaments. In the manufacture of composite, polyester resin was used as matrix. The physical and mechanical properties as well as the formability of the weft knit were analysed. The physical and mechanical properties as well as the formability of the knitted structure were analysed. The results obtained on the analysis show that the courses and wales of the weft knit structure and the tensile properties help the formability of the structure and the impregnation of the resin. It could be clearly observed that composite structure in the direction of the courses support more tension than in the direction of the wales. In relation to the three points flexural tests it was possible to note that there was more flexion in the direction of wales, what was expected. It was also possible to note that there are other advantages such as reduction in the loss of materials used, homogeneity in the distribution of the knitted structure in the mould, reduction in the preparation time and also in the reduction in the cost of manufacture