Adam Smith visto por Roberto Campos: a (re)criação do mito e as necessidades do capitalismo

This work aims at analyzing how Adam Smith, one of the founders of the liberal regime was seen by Roberto Campos, one of the patriarchs of Brazilian liberalism. In this sense, it will be shown how and why the legacy of Scotland was used to legitimize the new pattern of accumulation necessary to capitalism from the second half of the twentieth century on. So, it is the intention to make explicit that the changes in Campos discursive form are consistent with the requirements of capitalism in crisis and were fundamental in the creation of another common sense. To achieve these goals it will be assessed in what way the liberal rhetoric of the Brazilian, harmonized with foreign authors with the same vision, has become an important weapon to transform Smith into a myth in contrast to the political and economic criteria advocated by the same, but valuable to what Roberto Campos intended

Capital Social e Desenvolvimento Rural: acesso, uso e gestão da água nos Territórios Rurais do Sertão do São Francisco

This study aimed to contribute to the discussion of social capital, seeking to relate that to the access, use and water resources management in the Sao Francisco Vale, specifically in rural areas of the wilderness of San Francisco situated in the State of Bahia and Pernambuco. As, stimulate action possibilities for individuals (family rural) apart by a patrimony public so precious that is water. Besides a theoretical discussion of social capital (networks, trust, participation) and rural development. We applied 387 questionnaires to farmers and some interviews with actors social of territorial forum and committee of the São Francisco basin where it was possible to correlate our variables in order to confirm our hypothesis: social capital is a key element to ensure access, use and management of water for rural families living in irrigated and rainfed areas

Análise jurídico-constitucional do fomento aos campos maduros de produção de petróleo no Brasil

The oil activities in Brazil had been started in an intensive way in the end of the 30 s and in the beginning of the 40 s. Many of the brazilians fields discovered in the past are nowadays in decline. They are called ―mature fields‖. These fields, because of the decline situation that characterizes them, are not interesting for the majors. The majors want the big fields and big productions. On the other hand, they could be interesting for the small and medium enterprises. The mature oil fields are instruments of development, they have oil and the oil production is an activity connected with many social and economics benefits: jobs, taxes, royalties, etc. The Brazilian State, in this context, needs to realize actions to promote the activities in the mature oil fields, especially with the work of the small and mediums enterprises. Many of the onshore brazilian mature fields are located at the Northeast, a region matched by many social and economic problems. The activities in the mature fields of the Northeast Region could solve some of its problems. The present research analyses the mature oil fields and its situations in Brazil, making criticisms and suggestions. The methodology adopted is theoretical and descriptive, with literature review, case law and legislation (Constituição Federal de 1988, ―Law of the Oil‖). This research examines the following points: mature fields rounds and its documents, name and definition of the mature fields, definition of small and medium enterprises, environmental aspects, concentration of certain activities of the sector and the royalties

Direito fundamental ao tempo razoável do processo judicial: limites e possibilidades de concretização no ordenamento jurídico pátrio

This dissertation aims to address the limits and possibilities of realizing the fundamental right to reasonable time of the Brazilian legal system process. From this perspective, we analyze a reasonable time concept for the process, consistent with the civil homeland process; the relationship between efficiency, effectiveness, legal security and reasonable time of adjudication; a formal recognition of the fundamental right to reasonable time of the procedure in the Constitution of 1988; and the immediate applicability of this fundamental right. As indicated, the crisis of the Judiciary and procedural delay are problems directly related to the limits and possibilities of realization of the fundamental right under study. Moreover, we also present some mechanisms that can be used to overcome these problems. The subject was developed based on constitutional interpretation of fundamental rights, an approach that will always have this concern to be based on a methodology which includes the normative and empirical-dogmatic fields, realizing the fundamental right to reasonable time of the process. We adopted as methodological approach the study of this issue in judicial aspect, more specifically in the field of civil procedure. Finally, we weave through a critical and analytical view, our conclusions, which demonstrate the possibilities of overcoming the limits imposed to immediate implementation of the fundamental right to reasonable time of the process in our legal system

O princípio constitucional da redução das desigualdades regionais e os campos maduro-marginais de petróleo: aspectos regulatórios e fiscais

Under the circumstances of the desestatization that penetrate Brazilian economy in the 90‟s, new features in the monopoly of oil by the Union were designed by the constitutional amendment number 9. of 1995. This deep change in the legal regime of oil sector brought the possibility of entrance to small and medium size producers in this industry, especially through the production activities developed in mature and marginal fields of oil, which are located mainly in northeast region of Brazil. Considering that the intervention of state over the economy finds its guidelines and limits in Federal Constitution disposals, the present work investigated in which way states regulation, mainly through taxation rules, has obeyed the constitutional regime in force, and specially, the reduction of regional inequalities principle. By mean, firstly, of an analysis of central concepts (mature fields, marginal fields, small and medium size producers) we observed that the imprecision over the conceptual aspect has constituted an obstacle to a specific states‟ regulation, directed to this newborn class of producers, whose growth has been pursuit by the state. That is verified in the case of concession procedures, and also, concerning the taxation system applied to small and medium size producers. Examining the main constitutional principles related to this universe which are the legality, equality, privileged treatment to small enterprises, contributive capacity, and reduction of regional inequalities we conclude that it is legally possible, a truly specific regulation, including a special taxation regime, to the small and medium size producers whose activities are concentrate over mature-marginal fields, aiming the concretization of the Brazilian state main goals

Universidade e educação ambiental

The society consists of the inter-relations between diverse symbolic fields of performance, where some agents if identify for values, habits and goals. The present thesis analyzed, taking for base the Theory of the Social Field of Pierre Bourdieu, the ambient field and the university, leaving of the principle that the university is one of the propitious places for the quarrel, study, knowledge elaboration, and that the ambient education is one of the ways of dissemination of knowledge and action in favor of the ambient question. It was looked to contextualize and to identify the main factors that configure the university while a social field, and to evidence the conflict and connector links with the ambientalism. It is perceived university as space of tensions, whose produced capital stock in the academic scope must be enough convincing in the direction of the social transformation, of the expansion of conscience, the critical matureness, and thus to appear as agent of social transformation. The joint between the diverse social fields, promoted for the university, will be able to contribute for knowledge formularization that can consist base for elaboration of politics and programs to answer to the problems of the society contemporary. It has the inter-relationship between the two fields, however, this relation still is fragile, needing that a continuity practical social that they make possible that the ambient question is part of the culture of the university. This will be able to give with the intensification of the actions and the inclusion of the ambient questions in the communication mechanisms and administrative management. To surpass discontinuities caused for changes of groups leading and for interests politician conjunctural are necessary that they create habitus, what passes for the institutionalization of practical and the constitution of a culture that the agents allow if to reorganize defending the interests of social transformation front to the economic interests, as much in the university how much in the ambient field

As mudanças da educação do RN nos idos de 1950 e 1960 :a prática de Lia Campos

The present study investigates and analyzes the participation of the teacher Lia Campos, during the 50 s and 60 s years, in the norte-riograndense educational organization. The choice of the period is justified because was at this the time what this teacher remained in the potiguar lands, working in favor of the education. In the search of data that informed me concerning her actions, I cover quantities as the Public Archive of the Great River of the North, Historical Institute and Geographic of the Rio Grande do Norte and the Center of Supplementary Studies Teacher Lia Campos, in the task to obtain photographs and verbal stories of friends and fellow workers, periodicals of the time, laws and decrees. Based on the primary education, the work of Lia Campos shows the relevance of the teaching formation for this level of education and the way as the ones that in it work can lead their conceptions and daily practical tasks. This way, I evidence that the cited teacher promotes, in this State, a series of activities as: survey and systematization of the school net; organization of the administrative stuff of the schools; qualifications and courses of improving for lay professors, as well as implantation of the Law of the Education nº 2.171/1957. Through this analysis I show as this teacher left printed her mark in the Rio Grande do Norte historiography by means of her actions, being therefore remembered for that they had followed her experience in norte-riograndense lands

Desenvolvimento de um simulador de bombeio por cavidades progressivas

The method of artificial lift of progressing cavity pump is very efficient in the production of oils with high viscosity and oils that carry a great amount of sand. This characteristic converted this lift method into the second most useful one in oil fields production. As it grows the number of its applications it also increases the necessity to dominate its work in a way to define it the best operational set point. To contribute to the knowledge of the operational method of artificial lift of progressing cavity pump, this work intends to develop a computational simulator for oil wells equipped with an artificial lift system. The computational simulator of the system will be able to represent its dynamic behavior when submitted to the various operational conditions. The system was divided into five subsystems: induction motor, multiphase flows into production tubing, rod string, progressing cavity pump and annular tubing-casing. The modeling and simulation of each subsystem permitted to evaluate the dynamic characteristics that defined the criteria connections. With the connections of the subsystems it was possible to obtain the dynamic characteristics of the most important arrays belonging to the system, such as: pressure discharge, pressure intake, pumping rate, rod string rotation and torque applied to polish string. The shown results added to a friendly graphical interface converted the PCP simulator in a great potential tool with a didactic characteristic in serving the technical capability for the system operators and also permitting the production engineering to achieve a more detail analysis of the dynamic operational oil wells equipped with the progressing cavity pump

Análise e projeto de superfícies seletivas em frequência multibanda e/ou banda larga

Frequency selective surfaces (Frequency Selective Surface - FSS) are often used in various applications in telecommunications. Some of these applications may require that these structures have response with multiple resonance bands. Other applications require that the FSS response have large frequency range, to meet the necessary requirements. FSS to design with these features there are numerous techniques cited in the scientific literature. Thus, the purpose of this paper is to examine some common techniques such as: Overlap of FSS; Elements combined; Elements Elements convolucionados and fractals. And designing multiband FSS and / or broadband selecting simple ways in terms of construction and occupy the smallest possible space, aiming at practical applications. Given these requirements, three projects FSS were performed: a technology applied to IEEE 802.11 a/b/g/n and two projects for application in UWB. In project development, commercial software Ansoft DesignerTM and experimental results were satisfactory was used

Simulação computacional do escoamento em bombas de cavidades progressivas

The use of Progressing Cavity Pumps (PCPs) in artificial lift applications in low deep wells is becoming more common in the oil industry, mainly, due to its ability to pump heavy oils, produce oil with large concentrations of sand, besides present high efficiency when compared to other artificial lift methods. Although this system has been widely used as an oil lift method, few investigations about its hydrodynamic behavior are presented, either experimental or numeric. Therefore, in order to increase the knowledge about the BCP operational behavior, this work presents a novel computational model for the 3-D transient flow in progressing cavity pumps, which includes the relative motion between rotor and stator, using an element based finite volume method. The model developed is able to accurately predict the volumetric efficiency and viscous looses as well as to provide detailed information of pressure and velocity fields inside the pump. In order to predict PCP performance for low viscosity fluids, advanced turbulence models were used to treat, accurately, the turbulent effects on the flow, which allowed for obtaining results consistent with experimental values encountered in literature. In addition to the 3D computational model, a simplified model was developed, based on mass balance within cavities and on simplification on the momentum equations for fully developed flow along the seal region between cavities. This simplified model, based on previous approaches encountered in literature, has the ability to predict flow rate for a given differential pressure, presenting exactness and low CPU requirements, becoming an engineering tool for quick calculations and providing adequate results, almost real-time time. The results presented in this work consider a rigid stator PCP and the models developed were validated against experimental results from open literature. The results for the 3-D model showed to be sensitive to the mesh size, such that a numerical mesh refinement study is also presented. Regarding to the simplified model, some improvements were introduced in the calculation of the friction factor, allowing the application fo the model for low viscosity fluids, which was unsuccessful in models using similar approaches, presented in previous works

Simulação computacional da interação fluido-estrutura em bombas de cavidades progressivas

The pumping through progressing cavities system has been more and more employed in the petroleum industry. This occurs because of its capacity of elevation of highly viscous oils or fluids with great concentration of sand or other solid particles. A Progressing Cavity Pump (PCP) consists, basically, of a rotor - a metallic device similar to an eccentric screw, and a stator - a steel tube internally covered by a double helix, which may be rigid or deformable/elastomeric. In general, it is submitted to a combination of well pressure with the pressure generated by the pumping process itself. In elastomeric PCPs, this combined effort compresses the stator and generates, or enlarges, the clearance existing between the rotor and the stator, thus reducing the closing effect between their cavities. Such opening of the sealing region produces what is known as fluid slip or slippage, reducing the efficiency of the PCP pumping system. Therefore, this research aims to develop a transient three-dimensional computational model that, based on single-lobe PCP kinematics, is able to simulate the fluid-structure interaction that occurs in the interior of metallic and elastomeric PCPs. The main goal is to evaluate the dynamic characteristics of PCP s efficiency based on detailed and instantaneous information of velocity, pressure and deformation fields in their interior. To reach these goals (development and use of the model), it was also necessary the development of a methodology for generation of dynamic, mobile and deformable, computational meshes representing fluid and structural regions of a PCP. This additional intermediary step has been characterized as the biggest challenge for the elaboration and running of the computational model due to the complex kinematic and critical geometry of this type of pump (different helix angles between rotor and stator as well as large length scale aspect ratios). The processes of dynamic generation of meshes and of simultaneous evaluation of the deformations suffered by the elastomer are fulfilled through subroutines written in Fortan 90 language that dynamically interact with the CFX/ANSYS fluid dynamic software. Since a structural elastic linear model is employed to evaluate elastomer deformations, it is not necessary to use any CAE package for structural analysis. However, an initial proposal for dynamic simulation using hyperelastic models through ANSYS software is also presented in this research. Validation of the results produced with the present methodology (mesh generation, flow simulation in metallic PCPs and simulation of fluid-structure interaction in elastomeric PCPs) is obtained through comparison with experimental results reported by the literature. It is expected that the development and application of such a computational model may provide better details of the dynamics of the flow within metallic and elastomeric PCPs, so that better control systems may be implemented in the artificial elevation area by PCP

Avaliação do comportamento de fluidos micelares na recuperação avançada de petróleo

In heavy oil fields there is a great difficulty of the oil to flow from the reservoir to the well, making its production more difficult and with high cost. Most of the original volumes of oil found in the world are considered unrecoverable by the use of the current methods. The injection of micellar solutions has a direct action in the oil interfacial properties, resulting in an enhanced oil recovery. The objective of this research was the study and selection of micellar solutions with ability to decrease the interfacial interactions between fluids and reservoir formation, increasing oil production. The selected micellar solutions were obtained using commercial surfactants and surfactants synthesized in laboratory, based on the intrinsic properties of these molecules, to use in the enhanced oil recovery. Petroleum Reservoirs were simulated using sandstone plugs from Botucatu formation. Experiments with conventional and enhanced oil recovery techniques were accomplished. The obtained results showed that all micellar solutions were able to enhance oil recovery, and the micellar solution prepared with a SB anionic surfactant, at 2% KCl solution, showed the best recovery factor. It was also accomplished an economic analysis with the SB surfactant solution. With the injection of 20% porous volume of micellar solution, followed by brine injection, the increment in petroleum recovery can reach 81% recovery factor in the 3rd porous volume injected. The increment in the total cost by the addition of surfactant to the injection water represents R$ 7.50/ton of injected fluid

Desenvolvimento de um sistema foto-oxidativo visando aplicação no tratamento de águas produzidas em campos de petróleo

Increasing concern with the environment, in addition to strict laws, has induced the industries to find altenatives to the treatment of their wastes. Actually, the oil industry has sought solutions to overcome a big environmental problem, i.e., oil field produced water being discharged to the sea. These effluents have organic compounds dissolved, such as polycyclic aromatic hydrocarbons, phenols, benzene, toluene, ethylbenzene and xylenes (BTEX). These compounds are difficult to be removed and have high toxicity. The advanced oxidation processes - AOP are effective to degradation of these organic compounds, because they generate hydroxyl radicals with high potential of oxidation. This work includes the reactor photochemical development applied in the photodegradation treatment (by photo-Fenton process) of wastewaters containing organic compounds dissolved, aiming at treatment and recovery the oil field produced water. The studied reactor allowed the evaluation of two ultraviolet radiation sources that is the main factor to describe the feasibility of the photo¬Fenton treatment, i.e., sun and black light fluorescent lamps, and other relevant variables the process: concentration of reagents, irradiated area and also various reactor configurations to maximize the use of radiation. The organic matter degradation was verified with samples collected during the experimental and analyzed with a total organic carbon analyzer (TOC), which expressed the results in terms of mgC/L. The solar radiation was more effective than radiation from the lamps. it's an important factor for the operation costs cutting. Preliminary experiments applied to oil field produced water treatment have showed satisfactory results, reducing up to 76 % of organic matter

Desenvolvimento de um sistema foto-oxidativo visando aplicação no tratamento de águas produzidas em campos de petróleo

Increasing concern with the environment, in addition to strict laws, has induced the industries to find alternatives to the treatment of their wastes. Actually, the oil industry has sought solutions to overcome a big environmental problem, i.e., oil field produced water being discharged to the sea. These effluents have organic compounds dissolved, such as polycyclic aromatic hydrocarbons, phenols, benzene, toluene, ethylbenzene and xylenes (BTEX). These compounds are difficult to be removed and have high toxicity. The advanced oxidation processes - AOP are effective to degradation of these organic compounds, because they generate hydroxyl radicals with high potential of oxidation. This work includes the reactor photochemical development applied in the photodegradation treatment (by photo-Fenton process) of wastewaters containing organic compounds dissolved, aiming at treatment and recovery the oil field produced water. The studied reactor allowed the evaluation of two ultraviolet radiation sources that is the main factor to describe the feasibility of the photo- Fenton treatment, i.e., sun and black light fluorescent lamps, and other relevant variables the process: concentration of reagents, irradiated area and also various reactor configurations to maximize the use of radiation. The organic matter degradation was verified with samples collected during the experimental and analyzed with a total organic carbon analyzer (TOC), which expressed the results in terms of mgC/L. The solar radiation was more effective than radiation from the lamps. It's an important factor for the operation costs cutting. Preliminary experiments applied to oil field produced water treatment have showed satisfactory results, reducing up to 76 % of organic matter

Integração dos processos de flotação e foto-fenton para redução de óleos e graxas de água produzida em campos de petróleo

During production of oil and gas, there is also the production of an aqueous effluent called produced water. This byproduct has in its composition salts, organic compounds, gases and heavy metals. This research aimed to evaluate the integration of processes Induced Air Flotation (IAF) and photo-Fenton for reducing the Total Oils and Greases (TOG) present in produced water. Experiments were performed with synthetic wastewater prepared from the dispersion of crude oil in saline solution. The system was stirred for 25 min at 33,000 rpm and then allowed to stand for 50 min to allow free oil separation. The initial oil concentration in synthetic wastewater was 300 ppm and 35 ppm for the flotation and the photo-Fenton steps, respectively. These values of initial oil concentration were established based on average values of primary processing units in Potiguar Basin. The processes were studied individually and then the integration was performed considering the best experimental conditions found in each individual step. The separation by flotation showed high removal rate of oil with first-order kinetic behavior. The flotation kinetics was dependent on both the concentration and the hydrophilic-lipophilic balance (HLB) of the surfactant. The best result was obtained for the concentration of 4.06.10-3 mM (k = 0.7719 min-1) of surfactant EO 2, which represents 86% of reduction in TOG after 4 min. For series of surfactants evaluated, the separation efficiency was found to be improved by the use of surfactants with low HLB. Regarding the TOG reduction step by photo-Fenton, the largest oil removal reached was 84% after 45 min of reaction, using 0.44 mM and 10 mM of ferrous ions and hydrogen peroxide, respectively. The best experimental conditions encountered in the integrated process was 10 min of flotation followed by 45 min of photo-Fenton with overall TOG reduction of 99%, which represents 5 ppm of TOG in the treated effluent. The integration of processes flotation and photo-Fenton proved to be highly effective in reducing TOG of produced water in oilfields