61 resultados para Fluxos comunicacionais


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Titanium nitride films were grown on glass using the Cathodic Cage Plasma Deposition technique in order to verify the influence of process parameters in optical and structural properties of the films. The plasma atmosphere used was a mixture of Ar, N2 and H2, setting the Ar and N2 gas flows at 4 and 3 sccm, respectively and H2 gas flow varied from 0, 1 to 2 sccm. The deposition process was monitored by Optical Emission Spectroscopy (OES) to investigate the influence of the active species in plasma. It was observed that increasing the H2 gas flow into the plasma the luminescent intensities associated to the species changed. In this case, the luminescence of N2 (391,4nm) species was not proportional to the increasing of the H2 gas into the reactor. Other parameters investigated were diameter and number of holes in the cage. The analysis by Grazing Incidence X-Ray Diffraction (GIXRD) confirmed that the obtained films are composed by TiN and they may have variations in the nitrogen amount into the crystal and in the crystallite size. The optical microscopy images provided information about the homogeneity of the films. The atomic force microscopy (AFM) results revealed some microstructural characteristics and surface roughness. The thickness was measured by ellipsometry. The optical properties such as transmittance and reflectance (they were measured by spectrophotometry) are very sensitive to changes in the crystal lattice of the material, chemical composition and film thicknesses. Therefore, such properties are appropriate tools for verification of this process control. In general, films obtained at 0 sccm of H2 gas flow present a higher transmittance. It can be attributed to the smaller crystalline size due to a higher amount of nitrogen in the TiN lattice. The films obtained at 1 and 2 sccm of H2 gas flow have a golden appearance and XRD pattern showed peaks characteristics of TiN with higher intensity and smaller FWHM (Full Width at Half Maximum) parameter. It suggests that the hydrogen presence in the plasma makes the films more stoichiometric and becomes it more crystalline. It was observed that with higher number of holes in the lid of the cage, close to the region between the lid and the sample and the smaller diameter of the hole, the deposited film is thicker, which is justified by the most probability of plasma species reach effectively the sample and it promotes the growth of the film

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Interstitial compounds of titanium have been mainly studied due to the large range of properties acquired when C, N, O and H atoms are added. In this work, surfaces of TiCxNy were produced by thermochemical treatments assisted by plasma with different proportions of Ar + N2 + CH4 gas mixture. The Ar gas flow was fixed in 4 sccm, varying only N2 and CH4 gas flows. During the thermochemical treatment, the plasma was monitored by Optical Emission Spectroscopy (OES) for the investigation of the influence of active species. After treatments, C and N concentration profile, crystalline and amorphous phases were analyzed by Nuclear Reaction (NRA). Besides tribomechanical properties of the Ti surface were studied through the nanohardness measurements and friction coefficient determination. The worn areas were evaluated by profilometry and Scanning Electronic Microscope (SEM) in order to verify the wear mechanism present in each material. It has been seen which the properties like nanohardness and friction coefficient have strong relation with luminous intensity of species of the plasma, suggesting a using of this characteristic as a parameter of process

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Metal substrates were coated by thermal spraying plasma torch, they were positioned at a distance of 4 and 5 cm from the nozzle exit of the plasma jet. The starting materials were used for deposition of tantalum oxide powder and aluminium. These two materials were mixed and ground into high-energy mill, then immersed in the torch for the production of alumina coating infused with particles of tantalum with nano and micrometric size. The spraying equipment used is a plasma torch arc not transferred, which operating in the range of 250 A and 80 V, was able to produce enough heat to ignite aluminothermic between Ta2O5 and aluminum. Upon reaching the plasma jet, the mixing powders react with the heat of the blaze, which provides sufficient energy for melting aluminum particles. This energy is transferred through mechanisms of self-propagating to the oxide, beginning a reduction reaction, which then hits on the surface of the substrate and forms a coating on which a composite is formed by a junction metal - ceramic (Ta +Al2O3). The phases and quantification of each were obtained respectively by X-ray diffraction and the Rietveld method. Morphology by scanning electron microscopy and chemical analysis by energy dispersive spectroscopy EDS. It was also performed measurements of the substrate roughness, Vickers microhardness measurements in sprays and determination of the electron temperature of the plasma jet by optical emission spectroscopy EEO. The results confirmed the expectation generated around the end product of spraying the mixture Ta2O5 + Al, both in the formation of nano-sized particles and in their final form. The electron excitation temperature was consistent with the purpose of work, in addition, the thermodynamic temperature was efficient for the reduction process of Ta2O5. The electron excitation temperature showed values of 3000, 4500 and 8000 K for flows10, 20 and 30 l / min respectively, these values were taken at the nozzle exit of the plasma jet. The thermodynamic temperature around 1200 ° C, was effective in the reduction process of Ta2O5

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Plasma diagnostics by Optical Emission Spectroscopy were performed for electrical discharge in three gas mixture respecting the combinations z N2 y Ar x H2, z N2 y Ar x O2 e z N2 y Ar x CH4, in which the indexes z and y systematically vary from 1 to 4 and x varies from 0 to 4, every one has dimension SCCM, resulting in 80 combinations. From the all obtained spectrums, the species CH (387,1 nm), N2+ (391,4 nm), Hβ (486,1 nm), Hα (656,3 nm), Ar (750,4 nm), O (777,4 nm) e O (842,6 nm) were analyzed because of their abundance and importance on the kinetic of reaction from the plasma to surface, besides their high dependences on the gases flows. Particularly interesting z, y and x combinations were chosen in order to study the influence of active species on the surface modification during the thermochemical treatment. From the mixtures N2 Ar O2 e N2 Ar CH4 were chosen three peculiar proportions which presented luminous intensity profile with unexpected maximum or minimum values, denominated as plasma anomaly. Those plasma concentrations were utilized as atmosphere of titanium treatment maintaining constant the control parameters pressure and temperature. It has been verified a relation among luminous intensity associated to N2+ and roughness, nanohardness and O atoms diffusion into the crystalline lattice of treated titanium and it has been seen which those properties becomes more intense precisely in the higher points found in the optical profile associated to the N2+ specie. Those parameters were verified for the mixture which involved O2 gas. For the mixture which involves CH4 gas, the relation was determinate by roughness, number of nitrogen and carbon atoms diffused into the titanium structure which presented direct proportionality with the luminous intensity referent to the N2+ and CH. It has been yet studied the formation of TiCN phases on the surface which presented to be essentially directly proportional to the increasing of the CH specie and inversely proportional to the increasing of the specie N2+

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The technique of surface coating using magnetron sputtering is one of the most widely used in the surface engineering, for its versatility in obtaining different films as well as in the micro / nanometric thickness control. Among the various process parameters, those related to the active species of the plasma are of the most fundamental importance in the mechanism and kinetics of deposition. In order to identify the active species of the plasma, parameters such as gas flow, pressure and density of electric power were varied during titanium coating on glass substrate. By flowing argon gas of 10, 20, 30, 40 and 50 sccm (cubic centimeters per minute) for each gas flow a sequential scan of the electric current of 0.10, 0.20, 0.30, 0.40 , 0.50 A. The maximum value of 0.50 A was chosen based both on literature data and on limitations of the equipment. The monitoring of plasma species present during the deposition was carried out in situ by the technique of optical emission spectroscopy (OES) through the spectrometer Ocean Optics USB2000 Series. For this purpose, an apparatus was developed to adapt the OES inside the plasma reactor to stay positioned closest to the target. The radiations emitted by the species were detected by an optical fiber placed behind the glass substrate and their intensities as a function of wavelength were, displayed on a monitor screen. The acquisition time for each condition of the plain parameters was related to the minima of spectral lines intensities due to the film formed on the substrate. The intensities of different emission lines of argon and titanium were then analyzed as a function of time, to determine the active species and estimate the thickness of the deposited films. After the deposition, the coated glasses thin films were characterized by optical transmittance through an infrared laser. It was found that the thickness and deposition rate determined by in situ analysis were consistent with the results obtained by laser transmittance

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The aim of this study is the labour market at Natal Metropolitan Region with emphasis in occupations and incomes that took place at the nineties. The definition of its chronological boundaries passed by verification of existence of evident socio-spatial impacts for output, occupation and income in national economy, with rebounds in all national territory, conditioned by institutional and socio-economical transformations which marked Brazilian insertion to capital flows and commodities globalization movement that took place at the cited decade. It has been shown that such impacts did not distributed themselves equally between diverse spatial levels (great regions, federate unities, municipalities) because of historical specificities in each place in terms of output structures and organization of distinct social agents. Having as its basis the Marxist perspective, it tackled theoretically occupations and incomes, transformations in labour universe occurred at world level, mainly in most urbanized areas, and following that to focus changes occurred in Brazilian society related to the search for competitive insertion in global economy during the period regarded. Special attention was gave to Natal Metropolitan Region, because it was historically a concentration area for investments, productive structure, people, occupations and incomes generated/appropriated in Rio Grande do Norte State. The basic data sources for research were the demographic Census (micro data) made by the Instituto Brasileiro de Geografia e Estatística (IBGE) intending to present the structure and the labour market dynamics, having as basis: 1) traditional indicators about labour market; 2) sectors of economic activities and 3) social positions and classes segments. One of the purposes is the demonstration that occupations and incomes keep relation with the restructuring which occurred in each specific sector during the period. Other purpose is to make explicit the factors which bear the participation of distinct segments in production or service execution that make possible the different participation in income distribution. Results are revealing the increasin precariousness in labour market, enlargement of occupations in tertiary sector and greater concentration of average incomes in the social segments which were owners of the greatest capital allowances between residents in Natal Metropolitan Region during the nineties

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present study aimed to understand how and to what extent the electronic forró, currently hegemonic in the music market in the state of Rio Grande do Norte, establishes and maintains relations of domination in the social contexts in which it is produced, transmitted and received. Based, in significant form-content, on the writings of the first generation of theorists of the so-called Frankfurt School (Critical Theory), particularly with Theodor W. Adorno, and systematically using the contributions of the Cultural Studies (from the Centre for Contemporary Cultural Studies of Birmingham) and of the sociology of Pierre Bourdieu, this study aimed to perform, in the fertile intersection of these references, a critical possibility of interpretation of the electronic forró predominantly spread in the state of Rio Grande do Norte. To this end, aiming at a better apprehension of the so-called capital circuits/culture circuits , this study resulted from a qualitative investment of research, based on structured interviews with musicians, entrepreneurs of the sector and music consumers, as well as on the analysis of the themes contained in the official discography of the electronic forró band called Garota Safada (Shameless Girl). As a general empirical conclusion, it was possible to infer that far from the significant presence of domination or mere prevalence of oppositions, there is a relational pluralism of forms of domination and ways of resistances present in the production and consumption of electronic forró, regardless of gender, age, income, education or place of residence. However, the artifices of the cultural industry has been shown to be efficient: from large-scale businessmen to small producers enabled by the so-called open markets . The currentness of the concept of cultural industry is based on the idea that its products are offered systematically (the systematic insistence of everything to everyone) and on the notion that its production primarily meets the administrative criteria of control over the effects on the receiver (capacity of prescription of desires). Thus, the Adornian reflection on the pseudo-individualization leads to the inference that even in some of the most apparent ways of negotiation and/or refusal regarding the consumption of forró, certain behaviors of the cultural industry still prevail both in the very (re)interpretation of the forró and in the choice of other music genres also standardized, rationalized and massified. Therefore, despite the absence of cause-effect relation and the recognition of the popular capacity of re-elaboration and contestation of the media consumption, some world views prevailing in relation to the electronic forró establish or, at least, support some hegemonic ideologies, especially those concerning the life style, consumption and genre relations (fun by all means). Therefore, due the massification of certain songs, some ways of dissemination of values, beliefs and feelings are potentially experienced from the electronic forró. So, it is presumable that in the current advance of the process of semiformation (Halbbildung), the habitus of a part of the youth from the state of Rio Grande do Norte reinforces and is reinforced by the centrality of the trinomial fun, love and sex present in the songs, emphasized in some constructive practices of sense and in certain flows of social significance

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The decomposition process exercises an extensive control over the carbon cycle, affecting its availability and nutrient cycling in terrestrial ecosystems. The understanding of leaf decomposition patterns above the soil and fine roots decomposition below the soil is necessary and essential to identify and quantify more accurately the flow of energy and matter in forest systems. There is still a lack of studies and a large gap in the knowledge about what environmental variables act as local determinants over decomposition drivers. The knowledge about the decomposition process is still immature for Brazilian semiarid region. The aim of this study was to analyze the decomposition process (on leaves and fine roots) of a mixture of three native species for 12 months in a semiarid ecosystem in Northeast Brazil. We also examined whether the rate of decomposition can be explained by local environmental factors, specifically plant species richness, plant density and biomass, soil macro-arthropods species richness and abundance, amount of litterfall and fine root stock. Thirty sampling points were randomly distributed within an area of 2000 m x 500 m. To determine the decomposition rate, the litterbag technique was used and the data analysis were made with multiple regressions. There was a high degradation of dead organic matter along the experiment. Above ground plant biomass was the only environmental local factor significantly related to leaf decomposition. The density of vegetation and litter production were positively and negatively related to decay rates of fine roots, respectively. The results suggest that Caatinga spatial heterogeneity may exert strong influences over the decomposition process, taking into account the action of environmental factors related to organic matter exposure of and the consequent action of solar radiation as the decomposition process main controller in this region

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This work is part of the research group studying agribusiness chains, by characterizing agroindustrial chain of cashew nuts in Rio Grande do Norte, with special emphasis on Sertão de Apodi Citizenship Territory, showing their different flows and linkages and analyzes generating jobs and income in the production of this good, from the experience of COOPAPI, using as a methodology for analyzing the input-output matrix. And this is justified by the fact that Brazil is in the context as the world's fifth largest producer of cashew nuts and the production of this product focus in the Northeast, especially the Rio Grande do Norte, which is the second largest producer of region, behind only the state of Ceará, which is the largest producer in the country. Moreover, in recent years the state has increased its insertion in international markets this product, particularly the Mossoró-Assu Territory, which constitutes the largest producer in the state, particularly the municipality of Serra do Mel, which has an arrangement different yield, based on the model of integrated rural development, embodied in family farming. Nevertheless, the Sertão de Apodi Citizenship appear as the fourth among the Citizenship territories of Rio Grande do Norte in the ranking of the production of cashew nuts, but the prevailing model of Cooperatives in the Territory, based on the Solidarity Economy, i,e, different from the old cooperative, which is based on the precepts as patronage, with cooperative owners, favor, etc.., encourages scientific research. In this, after a careful analysis of data from field research, it was noticed that among the links in the chain, the production link is what generates the most jobs, while the processing link commands to generate income, but a portion meaningful occupations and income are generated outside the territory, especially out of state RN, denouncing the gap in supply of some specific demands within the chain

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This thesis is resulted of a research on propagated the social representations of constructivism in the Internet, which as had estimated basic the idea of Moscovici (1961) of that the media it has determinative paper in the popularization of the scientific theories, in formation e propagation of the social representations and in the construction of behaviors human beings. Understanding the Internet as latest space of circulation of social communications, therefore, privileged field (and still not explored) for studies of social representations, we choose this half midiático as investigative field of our research, it if it constitutes in the "great ocean of the new informational planet" (LEVY, 2000, p. 126), besides making possible the interaction with different forms of images, different individuals, different ' world ', configuring itself as important space of symbolic production e of analysis of the representational process in the world contemporary. Based in these questions, we trace as objective to analyze the circulating speech propagated on-line on the constructivism, searching to apprehend the social representations shared the respect. This objective was constructed in face of the insertion of the theory constructivist in the educational way has two decades more than, as well as of its consolidation as reference in different social contexts, mainly in midiático. The question that directed the research was: as this theory obtains to penetrate in some layers of our society, to influence the world readings e the behaviors of different people? That modifications it suffers in this trajectory and which the paper of the Internet in this process? The corpus of the research was constituted of the substances on the theory found in the Internet, in pages in Portuguese of Google, in the period of 27 of July of 2004 the 17 of August of 2004. The data they had been analyzed on the basis of the project of analysis of content elaborated for Moscovici (1961) and in the estimated theoreticians of the social communication, in special of the hypermedia. The results had disclosed that the Internet participates of determinative form in the process of popularization of the constructivism theory, not only spreading out its estimated theoretician- methodological for the domain public (diffusion), but propagating positive beliefs and images of its postulates (propagation) and using them it service of interests politicians e financiers (propaganda). The popularization of the constructivism in the Internet and social representations of this theory propagated configure one process in which the theory passes of pedagogical theoretical landmark for grief, assuming a commercial character extremely and the status of solution for problems of the education and the society, stirring up attitudes and behaviors in public, most general possible, that comes to take care of to the interests politicians e marketing. Recognizing the diversity, the permanent renewal of information and the negotiation of directions gifts in the Internet, as well as the innumerable ones forms of access to the information found by it, we consider results of the research as fruits of the inherent characteristics to this way midiático, to the time where we call the attention for relativity these results, for the plasticity of knowing them and sensible propagated on-line e for the great challenge that the hypermedia imposes to the study of communication phenomena, of the social representations and in educational quarrels and for the necessity of new research that they investigate the forms of socialization of the information and communication propitiated by hypermedia and its implications in the construction of the symbolic universes and in practical social

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present work concerns an auto-ethnographic study based on life experiences and reflections of an educator at Escola Viva Preschool and Elementary-Middle School, located in the city center of Natal, Rio Grande do Norte. As a cognitive model of operation, we use the metaphor of the Circle Dance. The objective of this study is to identify, interpret and describe the ludopoetics that are achieved through a Musical Education program, which we denominate, Humanescent. The data of this investigation was derived from the music making by Preschool and Elementary-Middle School students at Escola Viva during 2007, 2008 and 2009, from which 20 learners were selected to form the corpus, along with the description and interpretation of photos of their experiences and sand tray scenes. We justify the methodological systemization of the research based on our own pedagogical practice, which supports Musical Education in the schools based on the principals of Embodiment, Autopoesis and Flow. The methodological systemization was developed through an Action Research model and on the concepts of Systemic Development, with the goal of re-reading the context investigated through the structuring of categories of Ludopoesis: Self-esteem, Self-territory, Self-connectivity, Self-realization and Selfworth. We used an observant-participant research approach with regard to the perception of emergent knowledge, the surroundings, the experience lived and the contextual and vibration of the circumstances. Besides this, we used projection to interpret the experiences lived, in the form of drawings, short poems, letters or sand tray scenes as symbolic interpretations of experience. In the unfolding of the Ludopoetic Process (Selfesteem, Self-territory, Self-connectivity, Self-realization and Selfworth) we draw conclusions about the relevance of the ludic musical experience, which foments the formation of the self based on music learning, and which is demonstrated in the Embodiment of the learners. In the auto-formative process (of learners and educators) we observe the importance of pedagogical work based on Musical Humanescent Education that gives value to the music making path to the construction of music and performance in play, creativity, and sensibility. The experience of making music in a playful way allows for organization of the self and its autonomous production in the joy of living within a ludopoetic process. These findings highlight the educator as in a permanent state of selfformation, which generates moments of flow. However, in Musical Humanescent Education, music is learned collectively, doing a circle dance, experiencing love, fostering an expansion of the creative spirit, and giving recognition to playfulness as a necessary condition for education and to the value of music made with the true nature and sensibilities of the educators

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study shows the movement of educators ludopoiese ecosystem of the Center for Early Childhood Education Marise Paiva-CEIMAP. We used the metaphorof dance as an opportunity to stimulate scientific creativity. Ecosystem Thought, complex thinking, the theory of autopoiesis and Flow Theory, constituted the main theoretical steps to understand the phenomenon of ludopoiese, from the look of your totalidadem with the following objectives: 1 - Identify and interpret the process of self ludopoiética CEIMAP of Early Childhood Educators in the actions of the play, care for and educate in school life; 2 - Analyze Ecosystem Thought from ludopoiéticos how these processes affect and / or possible changes and transformations in practice humanescenteseducational CEIMAP. The theoretical metodógicos steps to address the proposed objectives are grounded in existential action research part of the appreciation of the complexity of the real, considering the human being a whole dynamic. In this sense the game of sand, recreational experiences, the systematic studies and video training were explored with a view to the transdisciplinary relevance of everyday phenomena. New knowledge acquired in accordance with the directions given indicating the movement of the ecosystem studied ludopoiese educators, involved in four main streams: love, play, care for and raise it from love streamline interdependently. The ludopoiese eachteacher would then be fed by this web generated by love that permeates all other educational activities, nurturing and maintaining a constant creative self-organization of knowledge and know-how to be teachers. Thus, every network that generates andstream lines the system emerges ludopoiético biology of love, the open dialogue and playing in the wishing well to the student, the aesthetic beauty of caring and educating, as a human conditionand relevant as possible to live / live not only in teaching children, but in other educational contexts of teaching and teacher education

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In recent years, the Brazilian construction industry has gone by changes like currency stability, increasing competition, shortage of skilled labor and increasing quality importance required by the customer, who made the sector companies seek solutions through new management practices in order to become more efficient. A alternative to these management practices is known as Lean Construction which is derived from the Toyota System Production. Lean Construction main goals are to reduce parts of activities that do not add value, increase product value by considering customer needs, reduce variability and production cycle time, simplify process by reducing the number of parts or steps, increase the flexibility in the product execution and transparency process, focus the control on overall process, introduce continuous improvement process, maintain a balance between improvements in flows and conversions and seek to learn from practices adopted by competitors. However, the construction industry is characterized by having nomadic activity, which undertakes an unique product with high cost of production and big inertia for behavioral change, making it difficult to implement the philosophy of lean construction in companies. In this sense, the main objective of this study is to develop a methodology for implementation of the principles of Lean Construction. The method of implementing the proposed management system was designed with the aid of 5W2H tool, and the implementation process is divided into three phases. The first one aims to know in a macro way the current operation of construction, identify who is its target audience and what are the products and services offered to the Market. The second phase aims to describe what actions should be taken and which documents are needed to be created or modified; finally, the third step goal consists in how to control and monitor established processes, where through Strategic Planning the company goals would be set along with their respective targets and indicators in order to keep the system working, aiming for continuous improvement with focus on the customer. This methodology was conceived as a case study analyzing a medium size construction with more than 18 years of activity and certified for almost 10 years with ISO9001 and level A in PBQP-H. We also conclude that this implementation process can be used in any developer and / or builder

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Most algorithms for state estimation based on the classical model are just adequate for use in transmission networks. Few algorithms were developed specifically for distribution systems, probably because of the little amount of data available in real time. Most overhead feeders possess just current and voltage measurements at the middle voltage bus-bar at the substation. In this way, classical algorithms are of difficult implementation, even considering off-line acquired data as pseudo-measurements. However, the necessity of automating the operation of distribution networks, mainly in regard to the selectivity of protection systems, as well to implement possibilities of load transfer maneuvers, is changing the network planning policy. In this way, some equipments incorporating telemetry and command modules have been installed in order to improve operational features, and so increasing the amount of measurement data available in real-time in the System Operation Center (SOC). This encourages the development of a state estimator model, involving real-time information and pseudo-measurements of loads, that are built from typical power factors and utilization factors (demand factors) of distribution transformers. This work reports about the development of a new state estimation method, specific for radial distribution systems. The main algorithm of the method is based on the power summation load flow. The estimation is carried out piecewise, section by section of the feeder, going from the substation to the terminal nodes. For each section, a measurement model is built, resulting in a nonlinear overdetermined equations set, whose solution is achieved by the Gaussian normal equation. The estimated variables of a section are used as pseudo-measurements for the next section. In general, a measurement set for a generic section consists of pseudo-measurements of power flows and nodal voltages obtained from the previous section or measurements in real-time, if they exist -, besides pseudomeasurements of injected powers for the power summations, whose functions are the load flow equations, assuming that the network can be represented by its single-phase equivalent. The great advantage of the algorithm is its simplicity and low computational effort. Moreover, the algorithm is very efficient, in regard to the accuracy of the estimated values. Besides the power summation state estimator, this work shows how other algorithms could be adapted to provide state estimation of middle voltage substations and networks, namely Schweppes method and an algorithm based on current proportionality, that is usually adopted for network planning tasks. Both estimators were implemented not only as alternatives for the proposed method, but also looking for getting results that give support for its validation. Once in most cases no power measurement is performed at beginning of the feeder and this is required for implementing the power summation estimations method, a new algorithm for estimating the network variables at the middle voltage bus-bar was also developed