37 resultados para Fluidez
Resumo:
Geopolymers are cementing materials that depict a number of advantages compared to Portland cement. Contrary to the latter, geopolymers are synthesized at room temperature, thus significantly reducing the emission of CO2 to the atmosphere. Moreover, the composition and synthesis reactions can be tailored to adjust the setting time of the material as well as its compressive mechanical strength. It is then possible to produce geopolymeric cements with short setting times and high compressive strength, although relatively brittle. The objective of the present study was to produce and characterize composite materials by reinforcing fastsetting geopolymeric matrixes with polypropylene geosynthetics (geomats and geotextiles) in an attempt to improve the toughness and tensile strength of the cementing material. Geosynthetics have been increasingly used to reinforce engineering structures, providing higher strength and better toughness. In particular, polypropylene nonwoven and geomats depict other attractive properties such as low density, durability, impact absorption and resistance to abrasion. Fast-setting geopolymers were then synthesized and reinforced with polypropylene nonwoven and geomats. The mechanical strength of the materials, reinforced or not, was characterized. The results showed that relatively short setting times and adequate flowing behavior were achieved by adjusting the composition of the geopolymer. In addition, it is possible to improve the fracture resistance of geopolymeric cements by adding polypropylene geosynthetics. The best results were achieved by reinforcing geopolymer with polypropylene TNT
Resumo:
This research presents an approach to the addition of curauá fibers and licuri fibers in a polypropylene resin matrix, such as an alternative proposal to reinforce the polymeric composites. Fiber content of 0 %, 5 %, 10 %, and 20% were analyzed for verification of their mechanical properties comparing them, inclusive with the properties of polypropylene. The grainulated biocomposites had been prepared in an extrusora. The test bodies had been molded by injection and submitted to the mechanical essays uniaxial traction, flexion on three points, impact, in addition to thermal tests (HDT). These biocomposites had been also subjected the essay physicist-chemistry index of fluidity (IF). It was observed that the biocomposites of PP with 20% curauá, obtained bigger increase in the modulus of elasticity and a bigger reduction in the resistance to the impact. In the mechanical behavior, for all the biocomposites, these were increases in values of the limit of drainage and tension of rupture, when tested by uniaxial traction, as they added the fibers. Another important point was the increase of the resistance the flexion. It was also noted that the addition of fibers reduced the thermal degradation of the mixture natural fibers / polypropylene.
Resumo:
Acerola (Malpighia emarginata D.C.) is a red fruit widely cultivated in Brazil, especially in the Northeastern region. Its increasing demand is attributed to its high ascorbic acid contents. Besides ascorbic acid, widely known by its health-benefit effects, acerola is rich in anthocyanins, which contribute for the antioxidant power of the fruit. Acerola processing produces a bright-red pomace, usually discarded. The further processing of this pomace, in order to explore its antioxidant compounds, could enhance acerola market value and rentability of its processing. Both ascorbic acid and anthocyanins are highly susceptible to degradation, that can be delayed by microencapsulation, which consists on packing particles (core) in an edible matrix (wall material). This work has been made with the purpose of producing a microencapsulated acerola pomace extract, which could be used by the food industry as a functional ingredient with antioxidant and coloring properties. Antioxidant compounds were recovered by pressing the pomace diluted in a solvent (a citric acid aqueous solution), by using a central composite design, with two variables: citric acid concentration in the solvent (0-2%), and solvent: pomace mass ratio (2:1-6:1). The acerola pomace extract was then microencapsulated by spray drying. A central composite design was adopted, with three variables: inlet temperature of the spray dryer (170o-200oC), wall material: acerola solids mass ratio (2:1-5:1), and degree of maltodextrin replacement by cashew tree gum as wall material (0-100%). The cashew tree gum was used because of its similarity to arabic gum, which is regarded as the wall material by excellence. The following conditions were considered as optimal for extraction of anthocyanins and ascorbic acid: solvent/pomace ratio, 5:1, and no citric acid in the solvent. 82.47% of the anthocyanins were recovered, as well as 83.22% of the ascorbic acid. Anthocyanin and ascorbic acid retentions were favored by lower inlet temperatures, higher wall material: acerola solids mass ratio and higher maltodextrin replacement by cashew tree gum, which was presented as a promising wall material. The more adequate microencapsulation conditions, based not only on retention of antioxidant compounds but also on physical properties of the final powder, were the following: inlet temperature, 185oC; wall material: acerola solids mass ratio, 5:1, and minimum degree of maltodextrin replacement by cashew tree gum, 50%
Resumo:
A exploração de petróleo está a cada dia em circunstâncias mais adversas, no que diz respeito à profundidade dos poços como também, em relação à fluidez do óleo. Os reservatórios de descobertas recentes não possuem energia própria para produzir ou os métodos convencionais não são eficientes para fazer com que esses reservatórios tenham uma vida útil elevada, devido a alterações das propriedades físico-químicas, como por exemplo a viscosidade, que torna o deslocamento do óleo pelos poros do reservatório até a superfície cada vez mais complexo. O presente trabalho tem como objetivo estudar a preparação, caracterização e a utilização de nanoemulsões obtidas a partir de sistemas microemulsionados, com e sem a presença de polímero. Esses sistemas foram aplicados como método químico de recuperação de petróleo, com o intuito de obter maior eficiência de volume de óleo deslocado. O interesse por esse tipo de sistema existe devido a sua baixa tensão superficial, o pequeno tamanho de gotícula e, principalmente, pelo baixo percentual de matéria ativa presente em sua composição. Os ensaios realizados para caracterizar esses sistemas foram: aspecto físico, medidas de tamanho de gotícula, índice de polidispersão, tensão superficial, pH e condutividade. Ensaios de reologia e de adsorção dos sistemas foram realizados com o objetivo de avaliar sua influencia na recuperação de petróleo. Os ensaios de recuperação foram realizados em um equipamento que simula as condições de um reservatório de petróleo, utilizando plugs de rocha arenito Botucatu. Esses plugs foram saturados com salmoura (KCl 2%) e com petróleo proveniente da Bacia Potiguar do campo de Ubarana. Após essas etapas foi realizada a recuperação convencional utilizando a salmoura e, por último, foi injetada, a nanoemulsão, como método de recuperação avançada. Os sistemas obtidos variaram de 0% à 0,4% de polímero. Os ensaios de tamanhos de partícula obtiveram como resultado uma variação de 9,22 a 14,8 nm, caracterizando que as nanoemulsões estão dentro da faixa de tamanho inerente a esse tipo de sistema. Para ensaios de tensão superficial os valores foram na faixa de 33,6 a 39,7 dynas/cm, valores semelhantes à microemulsões e bem abaixo da tensão superficial da água. Os resultados obtidos para os valores de pH e condutividade se mantiveram estáveis ao longo do tempo de armazenamento, essa avaliação indica estabilidade das nanoemulsões estudadas. O teste de recuperação avançada utilizando nanoemulsão com baixo percentual de matéria ativa obteve como resultado de eficiência de deslocamento 39,4%. Porém esse valor foi crescente, de acordo com o aumento do percentual de polímero na nanomeulsão. Os resultados de eficiência de deslocamento de petróleo estão diretamente relacionados com o aumento da viscosidade das nanoemulsões. A nanoemulsão V (0,4% polímero) é o sistema mais viscoso dentre os analisados, e obteve o maior percentual de óleo deslocado (76,7%), resultando na maior eficiência de deslocamento total (90%). Esse estudo mostrou o potencial de sistemas nanoemulsionados, com e sem polímeros, na recuperação avançada de petróleo. Eles apresentam algumas vantagens com relação a outros métodos de recuperação avançada, como: o baixo percentual de matéria ativa, baixo índice de adsorção do polímero, dissolvido em nanoemulsão, na rocha e alta eficiência de recuperação
Resumo:
The WAT is the temperature at the beginning of the appearance of wax crystals. At this temperature the first wax crystals are formed by the cooling systems paraffin / solvents. Paraffins are composed of a mixture of saturated hydrocarbons of high molecular weight. The removal of petroleum from wells and the production lines means a surcharge on produced oil, thus solubilize these deposits formed due to modifications of thermodynamics has been a constant challenge for companies of oil exploration. This study combines the paraffin solubilization by microemulsion systems, the determination of WAT systems paraffin / solvent and performance of surfactant in reducing the crystallization. We used the methods: rheological and the photoelectric signal, validating the latter which was developed to optimize the data obtained due to sensitivity of the equipment used. Methods developed for description of wax precipitation are often in poor agreement with the experimental data, they tend to underestimate the amount of wax at temperatures below the turbidity point. The Won method and the Ideal solution method were applied to the WAT data obtained in solvent systems, best represented by the second interaction of Won method using the solvents naphtha, hexane and LCO. It was observed that the results obtained by WAT photoelectric signal when compared with the viscosity occur in advance, demonstrating the greatest sensitivity of the method developed. The ionic surfactant reduced the viscosity of the solvent systems as it acted modifying the crystalline structure and, consequently, the pour point. The curves show that the WAT experimental data is, in general, closer to the modeling performed by the method of Won than to the one performed by the ideal solution method, because this method underestimates the curve predicting the onset of paraffin hydrocarbons crystallization temperature. This occurs because the actual temperature measured was the crystallization temperature and the method proposes the fusion temperature measurement.
Resumo:
This work is inserted to Applied Linguistic studies, concerned to the understanding that language is a social practice, bringing a qualitative research, discussing essential aspects that involve the subject and his/her discursive practice: signification and valuation. Due to this, we have elected as subject study, the sense and values attributed to the verbs make out and date searched on the articles written in the Vestibular 2005 process promoted by the Universidade Federal do Rio Grande do Norte (UFRN), that had the following instruction: In a relationship, is it better make out , just date , or, both, make out and date ? This research is based on the Circle of Bakhtin s dialogic theory, as well as in the notions of instability in the affective relationships nowadays and in the individualization and multiplicity of contemporaneous subjectivity. Those papers are important to analyze the meaning and values that the verbs make out and date present, nowadays, as expressions of an affective relationship and how this situation can interfere in the positions of subjectivity in a formal instance as a vestibular. Those textual productions reflect those relationships, confronting temporary ones, whose discuss is marked, in general, by social voices that evaluate to make out negatively and to date positively
Resumo:
This work has as object of study the Hospital de Caridade Juvino Barreto, nosocomial institution located in the city of Natal (RN), between the Praia de Areia Preta and the Monte Petrópolis, focusing on the period from 1909, the year in which the new hospital building was constructed and opened, and 1927, the date of the transfer of administration of the public domain to the newly created Sociedade de Assistência Hospitalar (SAH). We study the conditions of possibility of the emergence of this hospital space in the urban environment of the capital of Rio Grande do Norte, seeking to understand the different tactics and strategies implemented by the historical subjects involved in the formation of this institution nosocomial. Starting from a corpus of documents consisting of medical memories (with Dr. Januário Cicco as privileged observer), information present in newspapers (the Republic and the Christmas Journa l), photo collection and extensive administrative and legal material (Speeches, Exhibitions, Reports, Laws and Resolutions), we analyzed in detail the medical geography of HCJB, relating the discourses of medicine and geography in choosing the spatial location of the hospital as we examine the architecture of the hospital, its inner spat iality, divisions, forms of space control, and, finally, we discuss the medical practices that took place within it, leading us in this regard, from the experiences of clinical hospital chief, Dr. Januário Cicco, especially the discussion on "ethics" in hospital work. The perception of HCJB as medical nosoespaciality always on the move, incorporated under taxonomic principles based on difference and dispersion forces, led us to articulate it theoretically from the conceptual-methodological arsenal of philosopher Michel Foucault, particularly his reflections of genealogical phase, focusing on the phenomenon of power, a position that allows us to enhance our space-hospital construction, invention, product of power relations, which give the unfinished aspect nosocômio, apparent, always at stake, perpetual non-modeling possibility has previously defined array, establishing it at the field of possible, of virtuality, of power: hospital that could have been and that it was not. Indeed, the investigation of various aspects/elements of hospital space Juvino Barreto revealed us new dimensions of hospital space, far more complex than the simple and the current idea of a place to shelter patients: plasticity and fluidity of space, which is not made to circumscribe the limits of empeiria, engraving up to strength relations fought between different subject; its Constitution as a transitional space, Heterotopic, doing live inside modern elements with premoderns (professional doctors working with religious thought, skeptical of positivist medicine living with the religious faith of the nuns of Santana); the impossibility of thinking hospital space of HCJB while homogeneous unit, static, transistoric, making the spatiality, without considering the profound differences, fractures and dislocations that animated his own existence, multiplying their expressions of identity
Resumo:
The behavioral patterns follow to environmental changes, including area fidelity and individuals association patterns. Several techniques are used to record these behavioral patterns and the photo-identification has been suggested as a proper tool because of its various advantages. Based on this technique, this research verified, between August of 2005 and January of 2006, area fidelity and association patterns of Sotalia guianensis, at Distrito de Pipa s bays, Rio Grande do Norte State south coast. Besides, we measured the association patterns by using the Jaccard index or Half-Weight Index (HWI). According the observation, 22 individuals were not resighted, 11 were resighted, and 36 new individuals were recorded. Nowadays, 69 individuals are cataloged. The residency rate indicated heterogeneity on studied area permanence and the association patterns between photo-identified seem to be context-specific. In addiction, the comparison of associations between two different age classes showed some individuals more frequently interacting with immature individuals. We also observed fluidity on association patterns among our individuals. We suggest that S. guianensis population from Pipa shows plasticity
Resumo:
Nowadays we can observe in Natal city, the development of the structure and the health s private service. However, the spatial distribution of these services will be marked by an uneven distribution on the places, what will be in according with the conditions offered by the same in each historical period. Accordingly, the objective of this job is analyze the use of the territory by the health s private service and the dynamics that promotes in Natal city in the technical scientific information period. Thus, seeking to search this goal, realized literature, documentary, empirical, considering the process of development and the spatial distribution of the health s private service in the city. From a topology we can observe that prevails in the city a service s concentration at all levels of complexity in only a few neighborhoods, being Tirol and Petrópolis, which are neighborhoods that have high densities of engineer system, bigger fluidity, and the best level salaries of the city, which present a greater number of these establishments. However, equal this concentration has occurred a dispersion of these services to other neighborhoods, as for example Lagoa Nova which is presenting the same attractiveness in the view of attributes territorial, begins to protect services presenting the same profile like the firsts. However, the city has a significant demand to this kind of service found in these neighborhoods, some events provided the emergency of another type of market of health s private service, that are those created to attend guests with a lower purchasing power, which will have their establishments in the same way selectively distributed in some areas of the city, which will not be the same pursued by the other, showing how selective is the installation of an enterprise guide by the logic of capitalism reproduction. So, the imperative of spatial selectivity presented by the health s private sector exposes an use of the differential territory for these services
Resumo:
Lubricants and cutting middle distillates typically have large amounts of n-paraffins to increase its freezing point and fluidity. Accordingly, the removal of n-paraffins of long chain lubricants oils and diesel is essential to get a product with good cold flow properties. The development of new catalysts, which exhibit thermal stability and catalytic activity for the hydroisomerization reaction is still a challenge. Thus, silicoaluminophosphates (SAPO) were synthesized by different routes. Have been used also post-synthesis treatment for obtaining hybrid structures and others synthesis have been carried out with mesoporous template (soft and hard-template). Therefore, SAPO have been impregnated with H2PtCl6 solution by the incipient wetness method. Then assessments of catalytic activities in hydroisomerization and hydrocracking reactions of hexadecane have been held. Besides SAPO, niobium phosphate - NbP - were also impregnated with platinum and evaluated in the same reaction. After impregnation, these catalysts have been characterized by X-ray diffraction (XRD), nitrogen adsorption, infrared spectroscopy with adsorbed pyridine (IV-PY), scanning electron microscopy (SEM) and resonance nuclear magnetic 29Si (29Si-NMR). The characterization results by XRD have shown that it has been possible to obtain mesoporous SAPOs. However, for the syntheses with soft template there was collapse of the structure after removal of the organic template. Even so, these catalysts have been actives. It was possible to obtain hybrid materials through the synthesis of SAPO-11 made with hard templates and by means of post-synthesis treatments samples of SAPO-11. Moreover, NbP has shown characteristic XRD of amorphous materials, with high acidity and were active in the conversion of hexadecane.
Resumo:
Lubricants and cutting middle distillates typically have large amounts of n-paraffins to increase its freezing point and fluidity. Accordingly, the removal of n-paraffins of long chain lubricants oils and diesel is essential to get a product with good cold flow properties. The development of new catalysts, which exhibit thermal stability and catalytic activity for the hydroisomerization reaction is still a challenge. Thus, silicoaluminophosphates (SAPO) were synthesized by different routes. Have been used also post-synthesis treatment for obtaining hybrid structures and others synthesis have been carried out with mesoporous template (soft and hard-template). Therefore, SAPO have been impregnated with H2PtCl6 solution by the incipient wetness method. Then assessments of catalytic activities in hydroisomerization and hydrocracking reactions of hexadecane have been held. Besides SAPO, niobium phosphate - NbP - were also impregnated with platinum and evaluated in the same reaction. After impregnation, these catalysts have been characterized by X-ray diffraction (XRD), nitrogen adsorption, infrared spectroscopy with adsorbed pyridine (IV-PY), scanning electron microscopy (SEM) and resonance nuclear magnetic 29Si (29Si-NMR). The characterization results by XRD have shown that it has been possible to obtain mesoporous SAPOs. However, for the syntheses with soft template there was collapse of the structure after removal of the organic template. Even so, these catalysts have been actives. It was possible to obtain hybrid materials through the synthesis of SAPO-11 made with hard templates and by means of post-synthesis treatments samples of SAPO-11. Moreover, NbP has shown characteristic XRD of amorphous materials, with high acidity and were active in the conversion of hexadecane.
Resumo:
Analisa as práticas de mediação desenvolvidas nas bibliotecas universitárias pelos bibliotecários diante das tecnologias digitais. Para tanto estabelece como objetivo geral analisar de forma comparativa, o impacto e mediação das tecnologias digitais no funcionamento de bibliotecas Universitárias de Portugal e da região Nordeste do Brasil. Integraram esta pesquisa 10 universidades federais brasileiras e 12 universidades públicas portuguesas, com um total geral de 115 bibliotecários, que são os sujeitos participantes. É uma pesquisa qualitativa que adota o método quadripolar – recomendado para os trabalhos desenvolvidos no âmbito das Ciências Sociais Aplicadas, e em especial na área de Ciência da Informação. Através da interação entre os polos: epistemológico, teórico, técnico e morfológico, que fundamentam este método, houve o fortalecimento e a fluidez das questões estudadas. Os resultados dos questionários aplicados aos bibliotecários, bem como da análise dos sítios das bibliotecas pesquisadas, foram interpretados através de um alicerce teórico baseado em três pontos principais: as questões paradigmáticas que envolvem a área de Ciência da Informação, a análise da mediação pós-custodial informacional e científica e as Tecnologias de Informação e Comunicação presentes nas bibliotecas. Como principais resultados vemos que o impacto das tecnologias digitais nas bibliotecas universitárias é considerado pelos bibliotecários brasileiros e portugueses como positivo, com ênfase em dois pontos: a inovação dos suportes de informação e a autossuficiência dos utilizadores. A maior diferença se percebe em relação ao aspecto social, através de uma maior preocupação entre os bibliotecários brasileiros com as barreiras informacionais causadas por questões econômica, social e educacional e sentido com menos intensidade pelos bibliotecários portugueses, que ascendem as tecnologias digitais com mais facilidade. De forma conclusiva, a análise do impacto e a mediação das tecnologias digitais nas bibliotecas pesquisadas, apontam para uma evolução nas práticas mediadoras das bibliotecas universitárias de Portugal e do Nordeste do Brasil e uma convergência laboral entre os bibliotecários portugueses e brasileiros.
Resumo:
The spatial and temporal fluidity conditioned by the technologies of social interaction online have been allowing that collective actions of protest and activism arise every day in cyberspace - the cyber-activism. If before these actions were located in geographical boundaries, today's demands and mobilizations extrapolate the location, connect to the global, and at the same time, return to the regional through digital virtuality. Within this context of the relationship between digital technology and global flow of sociability, emerges in October 2010 the social movement of the hashtag "#ForaMicarla", which means the dissatisfaction of cibernauts from Natal of Twitter with the current management of the municipality of Natal-RN, Micarla de Sousa (Green Party). We can find in the center of this movement and others who appeared in the world at the same time a technological condition of Twitter, with the hashtag "#". Given this scenario, this research seeks to analyze how the relationship of the agents of movement hashtag "ForaMicarla", based on the principle that it was formed in the Twitter network and is maintained on the platform on a daily basis, it can create a new kind of political culture. Thus, this study discusses theoretically the importance of Twitter and movements that emerge on the platform and through it to understand the social and political demands of the contemporary world and this public sphere, which now seems to include cyberspace
Resumo:
Os seres humanos ao se reproduzirem como espécie e ao produzirem seus bens materiais produzem o espaço geográfico. Historicamente, o espaço vem sendo produzido em função do processo produtivo geral da sociedade. Partindo dessa abordagem, o trabalho em foco destina-se a fazer a análise da produção do traçado urbano de um simples povoado do litoral norte-rio-grandense, denominado Cajueiro, no qual observa-se uma total despreocupação com a composição urbanística da área, pelo fato da sua construção seguir os caminhos naturais vivenciados pelos seus moradores, mediante o atendimento das suas necessidades de sobrevivência ao longo dos anos. Para melhor entender historicamente a produção desse espaço litorâneo, optou-se por caminhar pelas suas ruas, becos e veredas, buscando através de entrevistas dirigidas e "bate papos espontâneos", explicações para a sua atual configuração urbana. Atualmente, esse parcelamento desordenado do solo, constitui-se num emaranhado tanto de ruas, como de casas que avançam sobre o leito das vias, provocando, assim, uma composição desordenada do espaço de circulação, fato esse que se constitui num problema de fluidez de veículos e pessoas que percorrem esses caminhos estreitos e tortuosos, os quais, muito se assemelham a um verdadeiro labirinto urbano, pelo fato de ruas apresentarem linhas sinuosas entrelaçadas e intricadas.
Resumo:
Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields