Avaliação da biodessulfurização de 4-metildibenzotiofeno por Rhodococus rhodochrous (NRRL B-2149)

Crude oil has between 0.04 up to 5% of sulphur, the higher the oil the higher the sulphur levels. Sulphur usually gives problems such as corrosion in refinery, and once burnt produces SO2 that goes to atmosphere. This work aim to investigate the capacity of Rhodococcus rhodochrous (NRRL B-2149) to metabolize the model compound 4-methyldibenzotiophene (4-MDBT), to remove the sulphur and transform it in 2-hydroxybiphenyl (2-HBF) and sulphite using the 4S pathway. Kynetic runs were carried out in shaker at 120 rpm and 32°C. Samples were taken every 12h to assay substrate consume as well as cells production using HPLC. Results showed that R. rhodochrous NRRL B-2149 can use the 4S pathway in order to remove sulphur without change the carbon chain of the molecule as well as that cells and 4-MDBT affects the product formation. The production of 2-hydroxybiphenyl has interest for industry once it is a potent biocide. However, evaluation is necessary in order to obtain better results compatible with industry needs

Controle aplicado a poços com método de elevação e bombeio centrífugo submerso

The Electrical Submersible Pumping is an artificial lift method for oil wells employed in onshore and offshore areas. The economic revenue of the petroleum production in a well depends on the oil flow and the availability of lifting equipment. The fewer the failures, the lower the revenue shortfall and costs to repair it. The frequency with which failures occur depends on the operating conditions to which the pumps are submitted. In high-productivity offshore wells monitoring is done by operators with engineering support 24h/day, which is not economically viable for the land areas. In this context, the automation of onshore wells has clear economic advantages. This work proposes a system capable of automatically control the operation of electrical submersible pumps, installed in oil wells, by an adjustment at the electric motor rotation based on signals provided by sensors installed on the surface and subsurface, keeping the pump operating within the recommended range, closest to the well s potential. Techniques are developed to estimate unmeasured variables, enabling the automation of wells that do not have all the required sensors. The automatic adjustment, according to an algorithm that runs on a programmable logic controller maintains the flow and submergence within acceptable parameters avoiding undesirable operating conditions, as the gas interference and high engine temperature, without need to resort to stopping the engine, which would reduce the its useful life. The control strategy described, based on modeling of physical phenomena and operational experience reported in literature, is materialized in terms of a fuzzy controller based on rules, and all generated information can be accompanied by a supervisory system

Pirólise de borras oleosas de petroleo utilizando nanomateriais

The oily sludge is a complex mix of hydrocarbons, organic impurities, inorganic and water. One of the major problems currently found in petroleum industry is management (packaging, storage, transport and fate) of waste. The nanomaterials (catalysts) mesoporous and microporous are considered promising for refining and adsorbents process for environment protection. The aim of this work was to study the oily sludge from primary processing (raw and treated) and vacuum residue, with application of thermal analyses technique (pyrolysis), thermal and catalytic pyrolysis with nanomaterials, aiming at production petroleum derived. The sludge and vacuum residue were analyzed using a soxhlet extraction system, elemental analysis, thin layer chromatography, thermogravimetry and pyrolysis coupled in gas chromatography/mass spectrometry (Py GC MS). The catalysts AlMCM-41, AlSBA-15.1 e AlSBA-15.2 were synthesized with molar ratio silicon aluminum of 50 (Si/Al = 50), using tetraethylorthosilicante as source of silicon and pseudobuhemita (AlOOH) as source of aluminum. The analyzes of the catalysts indicate that materials showed hexagonal structure and surface area (783,6 m2/g for AlMCM-41, 600 m2/g for AlSBA-15.1, 377 m2/g for AlSBA-15.2). The extracted oily sludge showed a range 65 to 95% for organic components (oil), 5 to 35% for inorganic components (salts and oxides) and compositions different of derivatives. The AlSBA-15 catalysts showed better performance in analyzes for production petroleum derived, 20% increase in production of kerosene and light gas oil. The energy potential of sludge was high and it can be used as fuel in other cargo processed in refinery

Desenvolvimento de metodologias analíticas alternativas por cromatografia gasosa para análise de biodiesel

Since the beginning of the National Program for Production and Use of Biodiesel in Brazil, in 2004, different raw materials were evaluated for biodiesel production, trying to combine the agricultural diversity of the country to the desire to reduce production coasts. To determine the chemical composition of biodiesel produced from common vegetables oils, international methods have been used widely in Brazil. However, for analyzing biodiesel samples produced from some alternative raw materials analytical problems have been detected. That was the case of biodiesel from castor oil. Due the need to overcome these problems, new methodologies were developed using different chromatographic columns, standards and quantitative methods. The priority was simplifying the equipment configuration, realizing faster analyses, reducing the costs and facilitating the routine of biodiesel research and production laboratories. For quantifying free glycerin, the ethylene glycol was used in instead of 1,2,4-butanetriol, without loss of quality results. The ethylene glycol is a cheaper and easier standard. For methanol analyses the headspace was not used and the cost of the equipment used was lower. A detailed determination of the esters helped the deeper knowledge of the biodiesel composition. The report of the experiments and conclusions of the research that resulted in the development of alternative methods for quality control of the composition of the biodiesel produced in Brazil, a country with considerable variability of species in agriculture, are the goals of this thesis and are reported in the following pages

Projeto, construção e análise de um prototipo vibracional em escala de bancada aplicável ao tratamento de água de produção de petróleo bruto, mediante inovadora operação híbrida de adsorção e auto-flotação

A self-flotator vibrational prototype electromechanical drive for treatment of oil and water emulsion or like emulsion is presented and evaluated. Oil production and refining to obtain derivatives is carried out under arrangements technically referred to as on-shore and off-shore, ie, on the continent and in the sea. In Brazil 80 % of the petroleum production is taken at sea and area of deployment and it cost scale are worrisome. It is associated, oily water production on a large scale, carrier 95% of the potential pollutant of activity whose final destination is the environment medium, terrestrial or maritime. Although diversified set of techniques and water treatment systems are in use or research, we propose an innovative system that operates in a sustainable way without chemical additives, for the good of the ecosystem. Labyrinth adsor-bent is used in metal spirals, and laboratory scale flow. Equipment and process patents are claimed. Treatments were performed at different flow rates and bands often monitored with control systems, some built, other bought for this purpose. Measurements of the levels of oil and grease (OGC) of efluents treaty remained within the range of legal framework under test conditions. Adsorbents were weighed before and after treatment for obtaining oil impregna-tion, the performance goal of vibratory action and treatment as a whole. Treatment technolo-gies in course are referenced, to compare performance, qualitatively and quantitatively. The vibration energy consumption is faced with and without conventional flotation and self-flotation. There are good prospects for the proposed, especially in reducing the residence time, by capillary action system. The impregnation dimensionless parameter was created and confronted with consecrated dimensionless parameters, on the vibrational version, such as Weber number and Froude number in quadratic form, referred to as vibrational criticality. Re-sults suggest limits to the vibration intensity

Modelos matemáticos para estimativa do consumo máximo de oxigênio pela ventilometria de esforço em indivíduos saudáveis

The relation between metabolic demand and maximal oxygen consumption during exercise have been investigated in different areas of knowledge. In the health field, the determination of maximal oxygen consumption (VO2max) is considered a method to classify the level of physical fitness or the risk of cardiocirculatory diseases. The accuracy to obtain data provides a better evaluation of functional responses and allows a reduction in the error margin at the moment of risk classification, as well as, at the moment of determination of aerobic exercise work load. In Brasil, the use of respirometry associated to ergometric test became an opition in the cardiorespiratory evaluation. This equipment allows predictions concerning the oxyredutase process, making it possible to identify physiological responses to physical effort as the respiratory threshold. This thesis focused in the development of mathematical models developed by multiple regression validated by the stepwise method, aiming to predict the VO2max based on respiratory responses to physical effort. The sample was composed of a ramdom sample of 181 healthy individuals, men and women, that were randomized to two groups: regression group and cross validation group (GV). The voluntiars were submitted to a incremental treadmill test; objetiving to determinate of the second respiratory threshold (LVII) and the Peak VO2max. Using the método forward addition method 11 models of VO2max prediction in trendmill were developded. No significative differences were found between the VO2max meansured and the predicted by models when they were compared using ANOVA One-Way and the Post Hoc test of Turkey. We concluded that the developed mathematical models allow a prediction of the VO2max of healthy young individuals based on the LVII

Abordagem inicial de lesões mamárias por biopsia helicóide: estudo experimental

OBJECTIVE: Evaluating the kit-Bh performance in carrying out of breast biopsies. METHODS: They were randomly selected a sample of 30 patients with breast cancer undergoing mastectomy, based on the results of a pilot study from February 2008 to April 2010. They were excluded women with had not palpable, stone-hard consistency tumors, previous surgical manipulation or that contains liquid. Using the helicoid biopsy Kit (kit Bh) and an equipment Core biopsy with cannula and needle and 14 gauge respectively, it was collected a fragment of sound equipment in the area and in tumors in each specimen, totaling 120 fragments for histological study. For data analysis, it was defined a 95% confidence level and used the SPSS-13 version, the Kappa index and the parametric Student t test. RESULTS: Mean age of patients was 51.6 years (± 11.1 years). The infiltrating ductal carcinoma showed a higher incidence, 26 cases (86.7%). The Core biopsy had a sensitivity of 93.3%, specificity of 100% and accuracy 96.7%, while the helicoid biopsy had a sensitivity of 96.7%, specificity of 100% and accuracy 98.3%. By comparing the histology of tumors and the fragments of biopsies, there was high degree of agreement in diagnoses (kappa of 0.93 with p <0.05) CONCLUSION: Both devices provided the histological diagnosis of lesions with high accuracy. Results of this study showed that the helicoid biopsy is a reliable alternative in 22 the preoperative diagnosis of breast lesions. Further studies in vivo better will define the role of Kit Bh in the diagnosis of these lesions

Representações sociais sobre o acidente de trabalho em saúde

The aim of the present study was to identify the representational elements of workrelated accidents in the health field, as well as investigate their most frequent occurrences at a university hospital, seeking to understand the cognitive, affective and social elements subjacent to the work process involved in health. The analysis focused on 470 middle and senior support staff of this hospital, based on the theoretical-methodological support of the Social Representations Theory. A combination of the following instruments was used for data collection: a free wordassociation test, a questionnaire, an interview and a field journal. Evoc 2000 software was used to identify representational structure. Chi-square and Mann-Whitney tests, at a significance level of 5%, were performed to verify the association between the independent variables and the occurrence of work accidents. In addition, thematic content analysis and lexicographic analysis by ALCESTE software program were used to understand textual content. It was observed that social representations of work-related accidents in the health area are centered in the contamination category, while the categories of prevention and professional unpreparedness are found peripherally. There was a significant association between the existence of multiple employment, the use of personal protective equipment (PPI) during work, job satisfaction and the occurrence of work accidents. The conclusions indicate that perforating-cutting occupational accidents predominated in the hospital and that the representations of the subjects intertwined, with a traditional discourse of work accidents strongly present in Occupational Health. It is therefore suggested that certain subjective aspects related to culture, in terms of controlling work accidents, such as: management, process, organization and the increasing precariousness

A educação no processo de trabalho da enfermagem: o caso do hospital de ensino

It is in the work environment that occurs the relations of production, economy, personal development and professional growth. Thus, this environment characterizes for being a propitious way to the intellectual development diligent them. In this context, this study it had as objective to analyze the possibilities and challenges of the education to consist integrant part of the process of work of the nursing, in an education hospital. One is about a research of analytical matrix and qualitative boarding, that had as collaborating fifteen professionals of the nursing, middle- and upper-level, of a hospital of education in Natal/RN. It followed the metodológicos estimated ones of the thematic verbal history, which looks for to promote the agreement or clarification of determined situations, catching experiences of made use people to say on aspects of its life, keeping a commitment with the social context. The information then had been gotten by means of a research instrument that made possible the accomplishment of interviews, which had been marked anticipatedly and counted on the assent of that in they had participated. The interviews had been recorded in proper equipment, so that you say them of the collaborators transcribing and they were analyzed with the support of pertinent literature. The content of you say them was classified in empirical categories, as the nuclei of felt that they presented. With the analysis of the data, one evidenced that the education in the process of work of the nursing is something possible to occur, but that diverse they are the challenges that the same one has that to face to promote this phenomenon in its daily one of work. The collaborators had affirmed that the worker is necessary to remain itself permanently in study so that, thus, it grows professionally and improves its assistance. They had still affirmed that she is possible to work and to study, but that this requires determination of who intends such intention. E also guarantees that the diverse forms of education directed toward the care in nursing can have resolution, since that has collective compromising of the institution. This, as education hospital, recognizes to be necessary to possess one politics of education for its workers and is if considering implementation the same one through a structuralized program already. Therefore, the results of this research show the necessity of changes in the current scene where if they find the workers of nursing of the institution in study. These changes can be reached through one politics of investment in the workers, allowing, beyond other benefits, the reach of new knowledge that take them to a significant learning in favor of the population, reflecting in the quality of the given assistance

Caracterização do acidente de trânsito e gravidade do trauma: um estudo em vítimas de um hospital de emergência de Natal

Descriptive exploratory study, with quantitative approach and prospective data performed on the Monsenhor Walfredo Gurgel Hospital Complex (MWGH), in Natal/RN, aiming to classify the type of motor vehicle involved in the accident, the public roadway s user quality and the more frequent injuries; to evaluate the severity of trauma in traffic accident victims; characterized the severity of the injuries and the trauma, and the type of motor vehicle involved. The population comprises 605 traffic accident victims, with data collected between October and December 2007. We used as a support for the evaluation of severity of injuries and trauma the Glasgow Coma Scale (GCSl), the Condensed Abbreviated Injury Scale (CAIS) and the Injury Severity Score (ISS). The results show that 82.8% of the victims were male; 78.4% were aged 18 to 38; the victims originating from the State s Countryside prevailed (43.1%); 24.3% of the population had completed middle-level instruction; 23.1% worked on commerce and auxiliary activities; most (79.4%) was catholic; 48.8% were married/consensual union; 76.2% earned up to two monthly minimum wages; Sunday was the day with the most accidents (25.1%); 47.4% were attended to in under an hour after the event; the motorcycle on its own was responsible for 53.2% of the accidents; 42.3% were attended to by the SAMU; 61.8% were victims of crashes; over half (53.4%) used individual protection equipment (IPE); 49.4% were helmets and 4.0% the seatbelt; 61.3% were motorcycle drivers; 43.3% of the accidents took place in the afternoon shift; from 395 drivers, 55.2% were licensed, and 50.7% among those had been licensed for 1 to 5 years; 90.7% of the victims had GCS1 between 13 and 15 points at the time of evaluation; the body area most affected was the external surface (35.9%); 38.8% of the injuries were light or moderate (AIS=1 and AIS=2); 83.2% had light trauma (ISS between 1 and 15 points). In face of the results, we can conclude that there is a risk for the elevation of injury severity and trauma resulting from traffic accidents, when these events are related to certain variables such as gender, age, weekday, the interval between the accident and the first care, ingestion of drugs, type of accident, the public roadway s user quality, the use of IPE, day shift, body regions and the type of motor vehicle involved in the accident

Segurança do paciente no sistema de medicação: análise de enfermeiros de um hospital de ensino

This study aimed to identify and describe the factors related to Patient Safety in a medication system according to the nurses analysis in a teaching hospital from the photographic analysis method. This was a cross-sectional, descriptive study with mixed approach in a teaching hospital in Rio Grande do Norte. The population consisted of 42 nurses from inpatient units, of which 34 composed the study sample. As eligibility criteria, we defined nurses from public service and nurses who agreed to participate. Ethical determinations were observed, the study was submitted to the Ethics and Research of the University Hospital Onofre Lopes, obtaining the assent with ethical assessment certificate (CAAE 0098.0.051.294-11). For data collection, we used the photographic method (Photographic Analysis Technique) by Patricia Marck (Canada). It was developed in two phases: at first, we randomly captured photos from the medication system, resulting in 282 images; then we selected/processed the photographs, which were reduced to 10 images in Microsoft Excel 2010; in the second phase, the nurses answered the questionnaire divided into socio-professional profile and Digital Photography Scoring Tool (questions a and b ). For analysis of the question a , we used the content analysis technique, and for b , we used the Statistical Package for the Social Sciences 20.0 (temporary license). The socio-professional profile revealed the predominance of females; age group 34-43 years; professionals with specialization; 10-18 years of length of service; and nurses working exclusively in the hospital and who know the Patient Safety. The photographic analysis in relation to Patient Safety resulted in specific categories for each stage of the medication system. Regarding disposal, we identified Proper verification ; Improper verification ; Correct identification ; Disposal in single doses ; and Improper Environment , with predominance of that last category. As for storage: Proper storage ; Improper storage ; Risk of exchange/disappearance ; and Poor hygiene , with special reference to improper storage. In preparation: Risk of exchanging medication/patient ; Inappropriate physical space ; and Inadequate 9 preparation of controlled drugs , highlighting the first category. In drug administration: Lack of Personal Protective Equipment ; Use of Personal Protective Equipment ; Improper administration technique ; Proper administration technique ; Correct drug identification ; Incorrect drug identification ; and Peripheral venous access without identification . From the safety assessment of 10 photographs, by adapting the scores (1-10) to the Likert Scale, we identified three Totally Unsafe (Level 1), three Unsafe (Level 2), three Partially Safe (Level 3), one Safe (Level 4), and no photograph considered Totally Safe. This study identified the prevalence of unsafety in the medication system in the nurses opinion. We were also able to understand that, although nurses identify safety aspects, the most prevalent categories characterize an unsafe assessment. Nursing needs to reflect on its practice, identifying gaps in the medication system in order to achieve a proper and safe care

Avaliação do uso do DCP em areias para controle da capacidade de carga em fundações diretas e controle de compactação de aterros

This work presents results of field and laboratory tests using a Dynamic Cone Penetrometer, DCP. The tests were performed in order to evaluate the use of the equipment in sand for the control of bearing capacity of shallow foundations and fill compaction. For shallow foundations, the laboratory tests were conducted on sand placed in a metallic mould by the method of sand pluviation. Although the results show the inability to reproduce field conditions in the laboratory it was possible to verify the ability of the DCP to identify less resistant soil layers. The DCP tests for the analysis of compaction control were performed in a strong box with inside dimensions of 1,40 m x 1,40 m and 0,70 m in height. The soil layers were compacted with different densities though the use of a vibrating plate in order to obtain correlations between penetration index, DPI, and soil relative density. Other tests were also conducted to assess the influence of soil moisture on tests results. Among other findings, the results showed the great potential for the use of DCP to control the compaction of sand fills

Método de avaliação do gerenciamento de resíduos em canteiro de obras da construção civil : proposta baseada em empresas construtoras da cidade de Natal-RN

According to great concern between the developed industrial activities and resultant impacts over the environment, an association of several factors have occurred, procedures to the efficient management of the rotation between economical development and the environment have been improved. A research in field have been realized inside building sites of companies in order to provide knowledge about the implemented and accomplish actions according to the resolution from CONAMA nº307. Trough the interview among the representations of the companies and photographic survey in loco, such as, what makes the companies implement this management, reutilization and recycling, transport and disposition. The present study had as objective: analyze the insertion of the used tools to residuals management, proposing improvements, in a way that it can be easily identified during the procedures execution in the building sites of the building companies of the city of Natal/RN. To reach the goal, in the first place a revision of the pertinent literature was performed; there for, it can be seen the relation between residues management and environment sustainability, once it happens in a continued way it may prevent the waste and reduces the risk that the activities way bring to the employees, community and environment; once found the great difficult faced with regard to labors, material, equipment, project, planning, costumer s interference, furnisher. And still, it could be verified wich materials generate greater indexes of residues in the works and the main occurrences of waste and loss. However a greater transparency is needed coming from the high administration in the commitment with the continued actions, to make it so, there must be a cultural change inside the company. There for there will be a greater productivity and quality of the under taking such as costumer s satisfaction

Heurísticas usando construção de vocabuilário aplicadas ao problema da atribuição de localidades a anéis em redes SONET/SDH

The SONET/SDH Ring Assignment Problem (PALAS) treats to group localities in form of some rings, being respected the traffic's limitations of the equipment. Each ring uses a DXC (Digital Cross Connect) to make the communication with the others, being the DXC the equipment most expensive of the net, minimizing the number total of rings, will minimize the total net cost, problem's objective . This topology in rings provides a bigger capacity of regeneration. The PALAS is a problem in Combinatorial Optimization of NP-hard Class. It can be solved through Heuristics and Metaheuristics. In this text, we use Taboo Search while we keep a set of elite solutions to be used in the formation of a part of the collection of vocabulary's parts that in turn will be used in the Vocabulary Building. The Vocabulary Building will be started case Taboo Search does not reach the best solution for the instance. Three approaches had been implemented: one that only uses vocabulary's parts deriving of Taboo Search, one that it only uses vocabulary's parts randomly generated and a last one that it uses half come of the elite and half randomly generated

Desenvolvimento de protótipo de cadeira de banho para indivíduos com paralisia cerebral tetraparética espástica

This study proposes to develop an equipment that attends the demands of tetraplegic people due to cerebral palsy and that promotes an adequate caregivers postural biomechanics during the shower activity of daily living. First, a bibliographic review was performed to define the terms refering to cerebral palsy, activity of daily living (specifically shower), and assistive technology, besides listing the wheelchairs made on the mainly national assistive technology companies. Therefore, this is a descriptive-exploratory study based on a literature review and on a based-field exploration research. On the field research a survey was adopted as a methodological procedure as it is related to a direct investigation related to a phenomenon, on the case, represented by the current shower situation of the people investigated in this study. Data were collected with the application of a form to the caregivers and consumers of the medical-therapeutic treatment and place used by the participants. Such form, which was made up of open and close questions, tried to identify, besides the personal data of evaluated users and consumers, the characteristics of the current shower activity, such as the place where it takes place in the house, the used equipmentS, in the case there is any, and how often it occurs. The form also was used to identify the caregivers and consumers desires and perceptions in relation to the present characteristics of the new dispositive besides the users and consumers anthropometric data. The evaluation of the results obtained through the form, together with the practice and clinical experience of the researchers and engineers involved in this study, made it possible to develop and make up a real shower chair prototype with the specific adjusts destined to adequate the equipment to be used according to the needs of each user and consumer