20 resultados para Fármacos Cardiovasculares
Resumo:
Climate and air pollution, among others, are responsible factors for increase of health vulnerability of the populations that live in urban centers. Climate changes combined with high concentrations of atmospheric pollutants are usually associated with respiratory and cardiovascular diseases. In this sense, the main objective of this research is to model in different ways the climate and health relation, specifically for the children and elderly population which live in São Paulo. Therefore, data of meteorological variables, air pollutants, hospitalizations and deaths from respiratory and cardiovascular diseases a in 11-year period (2000-2010) were used. By using modeling via generalized estimating equations, the relative risk was obtained. By dynamic regression, it was possible to predict the number of deaths through the atmospheric variables and the betabinomial-poisson model was able to estimate the number of deaths and simulate scenarios. The results showed that the risk of hospitalizations due to asthma increases approximately twice for children exposed to high concentrations of particulate matter than children who are not exposed. The risk of death by acute myocardial infarction in elderly increase in 3%, 6%, 4% and 9% due to high concentrations CO, SO2, O3 and PM10, respectively. Regarding the dynamic regression modeling, the results showed that deaths by respiratory diseases can be predicted consistently. The beta-binomial-poisson model was able to reproduce an average number of deaths by heart insufficiency. In the region of Santo Amaro the observed number was 2.462 and the simulated was 2.508, in the Sé region 4.308 were observed and 4.426 simulated, which allowed for the generation of scenarios that may be used as a parameter for decision. Making with these results, it is possible to contribute for methodologies that can improve the understanding of the relation between climate and health and proved support to managers in environmental planning and public health policies.
Resumo:
This thesis was performed in four chapters, at the theoretical level, focused mainly on electronic density. In the first chapter, we have applied an undergraduate minicourse of Diels-Alder reaction in Federal University of Rio Grande do Norte. By using computational chemistry tools students could build the knowledge by themselves and they could associate important aspects of physical-chemistry with Organic Chemistry. In the second chapter, we studied a new type of chemical bond between a pair of identical or similar hydrogen atoms that are close to electrical neutrality, known as hydrogen-hydrogen (H-H) bond. In this study performed with complexed alkanes, provides new and important information about their stability involving this type of interaction. We show that the H-H bond playing a secondary role in the stability of branched alkanes in comparison with linear or less branched isomers. In the third chapter, we study the electronic structure and the stability of tetrahedrane, substituted tetrahedranes and silicon and germanium parents, it was evaluated the substituent effect on the carbon cage in the tetrahedrane derivatives and the results indicate that stronger electron withdrawing groups (EWG) makes the tetrahedrane cage slightly unstable while slight EWG causes a greater instability in the tetrahedrane cage. We showed that the sigma aromaticity EWG and electron donating groups (EDG) results in decrease and increase, respectively, of NICS and D3BIA aromaticity indices. In addition, another factor can be utilized to explain the stability of tetra-tert-butyltetrahedrane as well as HH bond. GVB and ADMP were also used to explain the stability effect of the substituents bonded to the carbon of the tetrahedrane cage. In the fourth chapter, we performed a theoretical investigation of the inhibitory effect of the drug abiraterone (ABE), used in the prostate cancer treatment as CYP17 inhibitor, comparing the interaction energies and electron density of the ABE with the natural substrate, pregnenolone (PREG). Molecular dynamics and docking were used to obtain the CYP1ABE and CYP17-PREG complexes. From molecular dynamics was obtained that the ABE has higher diffusion trend water CYP17 binding site compared to the PREG. With the ONIOM (B3LYP:AMBER) method, we find that the interaction electronic energy of ABE is 21.38 kcal mol-1 more stable than PREG. The results obtained by QTAIM indicate that such stability is due a higher electronic density of interactions between ABE and CYP17
Resumo:
Bionanocomposites systems clay base (montmorillonite and sepiolite), layered double hidroxides and biopolymers (carboxymethylcellulose and zein) were evaluated as topical delivery systems with antibacterial activity and as oral delivery systems. For this study, neomycin, a topical antibiotic, indicated mainly for open wound infections. The drug amoxicillin, an antibiotic indicated mainly for throat infections, were also used in this study. Both antibiotics were used as model drugs. Initially, drugs were incorporated directly into the biopolymer matrix, comprising the combination of carboxymethylcellulos and zein, being conformed as movies and balls and evaluated for their antibacterial activity and controlled release simulating gastrointestinal fluids. Moreover, hybrids materials have been prepared where the neomycin drug was incorporated into the lamellar inorganic solids, such as montmorillonite by ion exchange reaction, and the fibrous type, such as sepiolite by adsorption in aqueous solution. But the drug amoxicillin was incorporated into layered double hydroxides by anion exchange and montmorillonite by cation exchange. The resulting hybrids were in turn combined with the biopolymer matrix yielding bionanocomposites shaped materials such as films were tested for their antibacterial activity, and the shaped materials beads were tested for their release in the gastrointestinal fluids. Through the analysis of various physico-chemical techniques, we observed the interactions between the studied materials, the formation of hybrids materials, obtaining the bionanocomposites materials and material efficiency when applied in controlled release of drugs both topical and use oral mainly influenced by the presence of zein, are promising as topical delivery systems and oral drugs.
Resumo:
A associação entre fatores de risco cardiovascular (FRCV) na pósmenopausa e o antecedente de irregularidade menstrual no menacme foi avaliado em estudo caso-controle envolvendo 414 mulheres na pósmenopausa com idade de 60,4 ± 5,5 anos e IMC de 25,3 ± 4,7 kg/m2. As variáveis consideradas foram: caracterização do ciclo menstrual entre 20 e 35 anos (independente) e relato atual sobre ocorrência de hipertensão arterial, dislipidemia, diabetes mellitus e doença arterial coronariana (dependentes). Utilizou-se o teste qui-quadrado e modelos de regressão logística, ajustados para outras variáveis implicadas no risco para doenças CV, com nível de significância 5%. Observou-se que mulheres que relataram irregularidade menstrual prévia estiveram associadas com risco aumentado para ocorrência de algum FRCV [odds ratio ajustado (OR)= 2,14; IC-95%= 1,02–4,48], quando comparadas àquelas com ciclos regulares. Análise estratificada demonstrou as seguintes associações significativas com o antecedente de irregularidade menstrual: hipertensão arterial (OR= 2,4; 95% IC= 1,39–5,41), hipercolesterolemia (OR= 2,32; 95% IC= 1,17–4,59), hipertrigliceridemia (OR= 2,09; 95% IC= 1,10–4,33) e angioplastia coronariana (OR= 6,82; 95% IC= 1,44–32,18). Os dados sugerem que o antecedente de irregularidade menstrual, indicativo da ocorrência da síndrome dos ovários policísticos na idade reprodutiva, pode estar relacionado com aumento do risco para doenças CV na pós-menopausa __________________________________________________ABSTRACT Menstrual Cycle Irregularity as a Marker of Cardiovascular Risk Factors at Postmenopausal Years.To evaluate the association between cardiovascular risk factors (CVRF)during postmenopausal years and previous menstrual irregularity during reproductive years, we performed a case-control study in 414 postmenopausal women (mean age 60.4 ± 5.5 years; BMI 25.3 ± 4.7 kg/m2). The variables assessed were: menstrual cycle characteristics at age 20–35y (independent) and records of arterial hypertension, dyslipidemia, diabetes mellitus, and coronary heart disease (dependent). Statistical analysis used the chi-square test and logistic regression, adjusting for potential confounders for cardiovascular risk, with significance set at 5%. Women reporting previous menstrual irregularity were associated with increased risk for some CVRF [adjusted odds ratio (OR) 2.14; CI-95%= 1.02–4.48], when compared with those reporting regular menstrual cycles. Stratified analysis demonstrated significant associations of previous menstrual irregularity with: arterial hypertension [OR= 2.74; CI-95%= 1.39–5.41), hypercholesterolemia (OR= 2.32; CI-95%= 1.17–4.59), hypertriglyceridemia (OR= 2.09; CI-95%=1.10–4.33), and coronary angioplasty (OR= 6.82; CI-95%= 1.44–32.18). These data suggest that a prior history of menstrual irregularity, as indicative of polycystic ovary syndrome, may be related to increased risk for CVD during postmenopausal years
Resumo:
With the advances in medicine, life expectancy of the world population has grown considerably in recent decades. Studies have been performed in order to maintain the quality of life through the development of new drugs and new surgical procedures. Biomaterials is an example of the researches to improve quality of life, and its use goes from the reconstruction of tissues and organs affected by diseases or other types of failure, to use in drug delivery system able to prolong the drug in the body and increase its bioavailability. Biopolymers are a class of biomaterials widely targeted by researchers since they have ideal properties for biomedical applications, such as high biocompatibility and biodegradability. Poly (lactic acid) (PLA) is a biopolymer used as a biomaterial and its monomer, lactic acid, is eliminated by the Krebs Cycle (citric acid cycle). It is possible to synthesize PLA through various synthesis routes, however, the direct polycondensation is cheaper due the use of few steps of polymerization. In this work we used experimental design (DOE) to produce PLAs with different molecular weight from the direct polycondensation of lactic acid, with characteristics suitable for use in drug delivery system (DDS). Through the experimental design it was noted that the time of esterification, in the direct polycondensation, is the most important stage to obtain a higher molecular weight. The Fourier Transform Infrared (FTIR) spectrograms obtained were equivalent to the PLAs available in the literature. Results of Differential Scanning Calorimetry (DSC) showed that all PLAs produced are semicrystalline with glass transition temperatures (Tgs) ranging between 36 - 48 °C, and melting temperatures (Tm) ranging from 117 to 130 °C. The PLAs molecular weight characterized from Size Exclusion Chromatography (SEC), varied from 1000 to 11,000 g/mol. PLAs obtained showed a fibrous morphology characterized by Scanning Electron Microscopy (SEM)