Fatores críticos de sucesso como antecedentes da aceitação de um sistema de informação em uma universidade federal

In recent decades the public sector comes under pressure in order to improve its performance. The use of Information Technology (IT) has been a tool increasingly used in reaching that goal. Thus, it has become an important issue in public organizations, particularly in institutions of higher education, determine which factors influence the acceptance and use of technology, impacting on the success of its implementation and the desired organizational results. The Technology Acceptance Model - TAM was used as the basis for this study and is based on the constructs perceived usefulness and perceived ease of use. However, when it comes to integrated management systems due to the complexity of its implementation,organizational factors were added to thus seek further explanation of the acceptance of such systems. Thus, added to the model five TAM constructs related to critical success factors in implementing ERP systems, they are: support of top management, communication, training, cooperation, and technological complexity (BUENO and SALMERON, 2008). Based on the foregoing, launches the following research problem: What factors influence the acceptance and use of SIE / module academic at the Federal University of Para, from the users' perception of teachers and technicians? The purpose of this study was to identify the influence of organizational factors, and behavioral antecedents of behavioral intention to use the SIE / module academic UFPA in the perspective of teachers and technical users. This is applied research, exploratory and descriptive, quantitative with the implementation of a survey, and data collection occurred through a structured questionnaire applied to a sample of 229 teachers and 30 technical and administrative staff. Data analysis was carried out through descriptive statistics and structural equation modeling with the technique of partial least squares (PLS). Effected primarily to assess the measurement model, which were verified reliability, convergent and discriminant validity for all indicators and constructs. Then the structural model was analyzed using the bootstrap resampling technique like. In assessing statistical significance, all hypotheses were supported. The coefficient of determination (R ²) was high or average in five of the six endogenous variables, so the model explains 47.3% of the variation in behavioral intention. It is noteworthy that among the antecedents of behavioral intention (BI) analyzed in this study, perceived usefulness is the variable that has a greater effect on behavioral intention, followed by ease of use (PEU) and attitude (AT). Among the organizational aspects (critical success factors) studied technological complexity (TC) and training (ERT) were those with greatest effect on behavioral intention to use, although these effects were lower than those produced by behavioral factors (originating from TAM). It is pointed out further that the support of senior management (TMS) showed, among all variables, the least effect on the intention to use (BI) and was followed by communications (COM) and cooperation (CO), which exert a low effect on behavioral intention (BI). Therefore, as other studies on the TAM constructs were adequate for the present research. Thus, the study contributed towards proving evidence that the Technology Acceptance Model can be applied to predict the acceptance of integrated management systems, even in public. Keywords: Technology

Motivação e satisfação à luz do modelo ASH: estudo de caso em indústria de alimentos

Neste estudo, foram examinadas as relações existentes entre a motivação e a satisfação do trabalhador no espaço laboral. O estudo empírico foi conduzido em uma única etapa, por meio da qual buscou-se conhecer as dimensões latentes identificadas e, a partir das dimensões validadas, buscou-se estabelecer relações com características motivacionais, como antecedentes, e satisfação pelo trabalho realizado, como conseqüência do atendimento das necessidades manifestadas pelo trabalhador. Foram entrevistados 38 (trinta e oito) funcionários da empresa Água Mineral Cristalina, incluindo-se os que ocupam cargos de chefia. Como instrumento de coleta de dados, foi utilizada parte do complexo da Auditoria do Sistema Humano ASH, criado por Quijano (1999), que se trata de um modelo de pesquisa na área de Psicologia Social, incluindo a Administração de Recursos Humanos, que analisa os processos psicológicos e psicossociais nas organizações. Para esta pesquisa, foram utilizados dois formulários sugeridos pelo autor citado, (anexos 01 e 02). O primeiro denomina-se condições para a motivação , com 15 (quinze) questões do tipo likert. O segundo, "trabalho bem feito e satisfação de necessidades", tem 22 (vinte e duas) questões, também do tipo likert. O instrumento foi respondido por colaboradores, independente da posição hierárquica, em aproximadamente 10 (dez) a 15 (quinze) minutos. A aplicação foi realizada diretamente pelo pesquisador nas unidades de produção e de administração da empresa. Por meio de modelagem de equações estruturais, foi estabelecido um modelo de relações causais entre as dimensões latentes relacionadas à motivação e o desempenho do empregado quando tem satisfeitas as suas necessidades. Quanto ao tratamento dos dados, este ocorreu de forma quantitativa. Quanto à análise, aconteceu após os dados terem sido tratados. Nesta pesquisa, os dados foram analisados por meio de estatísticas descritivas, atualizando-se os recursos de softwares específicos como Statistic ou SPSS Statistic Package for Social Sciences. Usou-se a técnica de Análise de Regressão, na qual foi utilizado o método STEPWISE que inclui na equação de explicação de uma variável dependente somente aquelas que auxiliam ou incrementam sua explicação. Como variáveis dependentes, foram utilizadas as variáveis do formulário "trabalho bem feito e satisfação de necessidades" e como variável independe as variáveis do questionário "condições para motivação". Sob o ponto de vista prático, este estudo mostrou que um determinado conjunto de características motivacionais influi positivamente na satisfação do trabalhador, que poderá realizar um trabalho bem feito; do lado teórico, a pesquisa verificou explicitamente a hipótese de que os aspectos motivacionais contribuem para que o empregado, sentindo-se satisfeito, desempenhe melhor as atribuições que lhe são conferidas

Remoção de metais pesados em efluentes sintéticos utilizando vermiculita como adsorvente

Heavy metals are used in many industrial processestheirs discard can harm fel effects to the environment, becoming a serious problem. Many methods used for wastewater treatment have been reported in the literature, but many of them have high cost and low efficiency. The adsorption process has been used as effective for the metal remoal ions. This paper presents studies to evaluate the adsorption capacity of vermiculite as adsorbent for the heavy metals removal in a synthetic solution. The mineral vermiculite was characterized by differents techniques: specific surface area analysis by BET method, X-ray diffraction, raiosX fluorescence, spectroscopy in the infraredd region of, laser particle size analysis and specific gravity. The physical characteristics of the material presented was appropriate for the study of adsorption. The adsorption experiments weredriveal finite bath metod in synthetic solutions of copper, nickel, cadmium, lead and zinc. The results showed that the vermiculite has a high potential for adsorption, removing about 100% of ions and with removal capacity values about 85 ppm of metal in solution, 8.09 mg / g for cadmium, 8.39 mg/g for copper, 8.40 mg/g for lead, 8.26 mg/g for zinc and 8.38 mg/g of nickel. The experimental data fit in the Langmuir and Freundlich models. The kinetic datas showed a good correlation with the pseudo-second order model. It was conducteas a competition study among the metals using vermiculiti a adsorbent. Results showed that the presence of various metals in solution does not influence their removal at low concentrations, removing approximat wasely 100 % of all metals present in solutions

Redução aluminotérmica do óxido de tântalo usando uma tocha de plasma como ignitor

In this work was used a plasma torch of non transferred arc with argon as work gas, using a power supply with maximum DC current of 250 A and voltage of 30 V to activate the plasma and keep it switched on. The flame temperature was characterized by optical emission spectroscopy, through Boltzmann-plot-method. The torch has been used like igniter in the aluminothermic reduction of the mixture tantalum oxide and aluminum, seeking to obtain metallic tantalum. In heating of the reagents only one particle will be considered to study interactions between plasma-particle, seeking to determinate its fusion and residence time. The early powders were characterized by laser granulometry, scanning electron microscopy (SEM) and X-ray diffraction analysis. The final product of this reaction was characterized by SEM and X-ray diffraction. Crystallite size was calculated by the Scherrer equation and microdeformation was determined using Willamsom-Hall graph. With Rietveld method was possible to quantify the percentile in weight of the products obtained in the aluminothermic reaction. Semi-quantitative chemical analysis (EDS) confirmed the presence of metallic tantalum and Al2O3 as products of the reduction. As was waited the particle size of the metallic tantalum produced, presents values in nanometric scale due the short cooling time of those particles during the process

Implementação do algoritmo (RTM) para processamento sísmico em arquiteturas não convencionais

With the growth of energy consumption worldwide, conventional reservoirs, the reservoirs called "easy exploration and production" are not meeting the global energy demand. This has led many researchers to develop projects that will address these needs, companies in the oil sector has invested in techniques that helping in locating and drilling wells. One of the techniques employed in oil exploration process is the reverse time migration (RTM), in English, Reverse Time Migration, which is a method of seismic imaging that produces excellent image of the subsurface. It is algorithm based in calculation on the wave equation. RTM is considered one of the most advanced seismic imaging techniques. The economic value of the oil reserves that require RTM to be localized is very high, this means that the development of these algorithms becomes a competitive differentiator for companies seismic processing. But, it requires great computational power, that it still somehow harms its practical success. The objective of this work is to explore the implementation of this algorithm in unconventional architectures, specifically GPUs using the CUDA by making an analysis of the difficulties in developing the same, as well as the performance of the algorithm in the sequential and parallel version

Novo método para estimativa do gradiente de fratura para poços de petróleo

The development of oil wells drilling requires additional cares mainly if the drilling is in offshore ultra deep water with low overburden pressure gradients which cause low fracture gradients and, consequently, difficult the well drilling by the reduction of the operational window. To minimize, in the well planning phases, the difficulties faced by the drilling in those sceneries, indirect models are used to estimate fracture gradient that foresees approximate values for leakoff tests. These models generate curves of geopressures that allow detailed analysis of the pressure behavior for the whole well. Most of these models are based on the Terzaghi equation, just differentiating in the determination of the values of rock tension coefficient. This work proposes an alternative method for prediction of fracture pressure gradient based on a geometric correlation that relates the pressure gradients proportionally for a given depth and extrapolates it for the whole well depth, meaning that theses parameters vary in a fixed proportion. The model is based on the application of analytical proportion segments corresponding to the differential pressure related to the rock tension. The study shows that the proposed analytical proportion segments reaches values of fracture gradient with good agreement with those available for leakoff tests in the field area. The obtained results were compared with twelve different indirect models for fracture pressure gradient prediction based on the compacting effect. For this, a software was developed using Matlab language. The comparison was also made varying the water depth from zero (onshore wellbores) to 1500 meters. The leakoff tests are also used to compare the different methods including the one proposed in this work. The presented work gives good results for error analysis compared to other methods and, due to its simplicity, justify its possible application

Nova técnica para obtenção de fraturas com altíssima condutividade em poços de petróleo

Increase hydrocarbons production is the main goal of the oilwell industry worldwide. Hydraulic fracturing is often applied to achieve this goal due to a combination of attractive aspects including easiness and low operational costs associated with fast and highly economical response. Conventional fracturing usually involves high-flowing high-pressure pumping of a viscous fluid responsible for opening the fracture in the hydrocarbon producing rock. The thickness of the fracture should be enough to assure the penetration of the particles of a solid proppant into the rock. The proppant is driven into the target formation by a carrier fluid. After pumping, all fluids are filtered through the faces of the fracture and penetrate the rock. The proppant remains in the fracture holding it open and assuring high hydraulic conductivity. The present study proposes a different approach for hydraulic fracturing. Fractures with infinity conductivity are formed and used to further improve the production of highly permeable formations as well as to produce long fractures in naturally fractured formations. Naturally open fractures with infinite conductivity are usually encountered. They can be observed in rock outcrops and core plugs, or noticed by the total loss of circulation during drilling (even with low density fluids), image profiles, pumping tests (Mini-Frac and Mini Fall Off), and injection tests below fracturing pressure, whose flow is higher than expected for radial Darcian ones. Naturally occurring fractures are kept open by randomly shaped and placed supporting points, able to hold the faces of the fracture separate even under typical closing pressures. The approach presented herein generates infinite conductivity canal held open by artificially created parallel supporting areas positioned both horizontally and vertically. The size of these areas is designed to hold the permeable zones open supported by the impermeable areas. The England & Green equation was used to theoretically prove that the fracture can be held open by such artificially created set of horizontal parallel supporting areas. To assess the benefits of fractures characterized by infinite conductivity, an overall comparison with finite conductivity fractures was carried out using a series of parameters including fracture pressure loss and dimensionless conductivity as a function of flow production, FOI folds of increase, flow production and cumulative production as a function of time, and finally plots of net present value and productivity index

Metodologia para avaliação de cinemática de partículas gasosas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo

Many challenges have been presented in petroleum industry. One of them is the preventing of fluids influx during drilling and cementing. Gas migration can occur as result of pressure imbalance inside the well when well pressure becomes lower than gas zone pressure and in cementing operation this occurs during cement slurry transition period (solid to fluid). In this work it was developed a methodology to evaluate gas migration during drilling and cementing operations. It was considered gel strength concept and through experimental tests determined gas migration initial time. A mechanistic model was developed to obtain equation that evaluates bubble displacement through the fluid while it gels. Being a time-dependant behavior, dynamic rheological measurements were made to evaluate viscosity along the time. For drilling fluids analyzed it was verified that it is desirable fast and non-progressive gelation in order to reduce gas migration without affect operational window (difference between pore and fracture pressure). For cement slurries analyzed, the most appropriate is that remains fluid for more time below critical gel strength, maintaining hydrostatic pressure above gas zone pressure, and after that gels quickly, reducing gas migration. The model developed simulates previously operational conditions and allow changes in operational and fluids design to obtain a safer condition for well construction

Diversidade de espécies e ecologia da comunidade de lagartos de um fragmento de Mata Atlântica no nordeste do Brasil

Neste estudo foram investigadas a diversidade, a composição, e as diferenças no uso do espaço (hábitat e microhábitat) e do alimento em uma comunidade de lagartos habitantes da serapilheira de um fragmento de Mata Atlântica, do Estado de Alagoas, Brasil. Para a observação e/ou coleta dos espécimes, foram utilizados os métodos de busca ativa e armadilhas de queda (pit-fall traps) sem cerca-guia. Para análises de diversidade e da existência de diferenças de diversidade entre os hábitats e microhábitats, utilizou-se o índice de Shannon. A largura dos nichos espacial (hábitat e microhábitat) e alimentar foi avaliada, utilizando-se o índice de diversidade de Simpson. A similaridade entre as áreas foi averiguada utilizando-se o índice de Jaccard. Para avaliar o grau de sobreposição quanto ao uso do espaço (hábitats e microhábitats) e do alimento pelas espécies, foi utilizada uma versão da equação de MarcArthur & Levis. Foram obtidas vinte e três espécies de lagartos, pertencentes a nove famílias; destas, dezenove foram obtidas no interior da mata e nove na borda. Para o interior da mata as espécies mais abundantes foram Kentropyx calcarata, Dryadosaura nordestina, Enyalius catenatus e Gymnodactylus darwinii. Na borda da mata as espécies mais abundantes foram Tropidurus hispidus, T. semitaeniatus, Ophiodes striatus e Ameiva ameiva. Quanto à utilização dos recursos, os resultados mostraram que espécies filogeneticamente próximas nem sempre utilizam de maneira semelhante os recursos disponíveis. A dieta em geral foi composta por artrópodes. Tropidurus hispidus e T. semitaeniatus se mostraram especialistas no consumo de Himenoptera (Formicidae), que estiverem presentes em 100% dos seus estômagos. Ophiodes striatus teve como principal alimento caramujos (Gastropoda) e aranhas com 60% cada; sendo Gastropoda mais abundante para esta espécie

Avaliação in vitro da atividade antimicrobiana de diferentes soluções a base de hidróxido de cálcio

The science of Dentistry wishes obtains the ideal solution for the dental plaque chemical control. This research evaluated antimicrobial action capacity in calcium hydroxide and tergentol various solutions starting for the CHD 20, a root canals irrigating solution with a reason of 80% calcium hydroxide saturated solution and 20% tergentol detergent with the aim of evaluate this drug mouth rinse indication with prevention or combat objective for dental caries and periodontal diseases. Antibiogram disks and biofilm tests were accomplished for the microorganisms: Streptococcus mutans, Streptococcus sanguis, Streptococcus sobrinus and Lactobacillus casei. Different reasons of detergent for the calcium hydroxide saturated solution, tergentol and distillated water solution, 0,12% clorhexydine digluconate solution was positive control and distillated water was negative control. The results showed better performance of clorhexydine in relation to calcium hydroxide directing to not accept this (CHD20) as mouth rinse solution

Modelo matemático para predição do VO2máx em cicloergômetro baseado na análise dos gases expirados

Existem diversas equações para predição do VO2máx a partir de variáveis dentro do teste ergométrico em vários ergômetros, no entanto equação semelhante utilizando os limiares ventilatórios na ergoespirometria em teste sub-máximo no cicloergômetro não está disponível. O objetivo do presente estudo foi avaliar a precisão de modelos de predição do VO2máx com base em indicadores de esforço sub-máximo. Neste sentido foram testados em protocolo incremental máximo no cicloergômetro 7.877 voluntários, sendo 4640 indivíduos do sexo feminino e 3147 do sexo masculino, todos saudáveis não atletas, com idades acima de 20 anos, divididos randomicamente em dois grupos: A de estimação e B de validação. A partir das variáveis independentes massa corporal (MC) em kg, carga de trabalho no limiar 2 (WL2) e freqüência cardíaca no limiar 2 (FCL2) foi possível construir um modelo de regressão linear múltipla para predição do VO2máx. Os resultados demonstram que em indivíduos saudáveis não atletas de ambos os sexos é possível predizer o VO2máx com um erro mínimo (EPE = 1,00%) a partir de indicadores submáximos obtidos em teste incremental. O caráter multidisciplinar do trabalho pôde ser caracterizado pelo emprego de técnicas que envolveram pneumologia, educação física, fisiologia e estatística

Estado nutricional antropométrico, composição corporal e pressão arterial em adolescentes

Os objetivos deste trabalho foram: (1) estimar as prevalências de excesso de peso e de gordura corporal, obesidade central e pressão arterial elevada (PAE) em adolescentes beneficiários do Programa Nacional de Alimentação Escolar (PNAE) da rede municipal de ensino de Natal-RN; (2) verificar a associação entre variáveis antropométricas e de composição corporal com a pressão arterial, a maturação sexual e a história familiar positiva de fatores de risco para doença cardiovascular (FRDCV); (3) comparar dois padrões de referência para classificação do excesso de peso em adolescentes; e (4) propor equações preditivas de massa gorda (MG) e massa livre de gordura (MLG) baseadas nos perímetros corporais. Trata-se de um estudo transversal, com 526 adolescentes beneficiários do PNAE, em Natal, Brasil. O tamanho da população de estudo foi definido por amostragem aleatória, em dois estágios, e ponderada segundo número de alunos de cada escola. No primeiro estudo, o excesso de peso foi determinado por Índice de Massa Corporal (IMC), a gordura corporal estimada por dobras cutâneas e a obesidade central por perímetro abdominal. A pressão arterial elevada foi classificada conforme a American Academy of Pediatrics. As prevalências foram apresentadas em valores relativos e efeito do desenho. Realizou-se uma análise fatorial para sintetizar o conjunto de variáveis antropométricas visando identificar fatores comuns. Extraíram-se dois fatores: (1) padrão excesso de adiposidade e (2) padrão adiposidade central elevada. Para avaliar a associação entre os padrões de adiposidade corporal com pressão arterial elevada, faixa etária, maturação sexual e história familiar de FRDCV utilizou-se a Razão de Chances e respectivo intervalo de confiança de 95% e regressão logística. No segundo estudo, calculou-se a sensibilidade e a especificidade do excesso de peso classificado segundo o IOTF e a World Health Organization WHO em relação ao excesso de adiposidade corporal; e a estatística Kappa para medir a concordância entre os dois padrões de referência. No terceiro estudo, foram elaborados modelos preditivos de MG e MLG com base em nove perímetros corporais, utilizando a bioimpedância Byodinamics 450 como padrão de referência. Para tanto foram selecionados 218 adolescentes eutróficos, segundo o IMC a partir do estudo transversal. As equações foram estimadas por regressão linear múltipla, considerando a idade e os perímetros corporais. Os resultados apontaram que 14,1% dos meninos e 15,7% das meninas tinham excesso de peso; 15,3% dos meninos e 11,6% das meninas tinham excesso de gordura corporal e dentre os meninos 14,3% tinham pressão arterial elevada e as meninas, 21,4%. Todos os efeitos do desenho foram inferiores a 2,5%. Nos meninos, o padrão excesso de adiposidade foi associado à história familiar positiva de FRDCV (ORajust=2,60; 1,09-6,22), maturação sexual (ORajust=2,92; 1,04-8,22) e PAE (ORajust=3,66; 1,34-9,94). Os meninos com 12 anos e mais apresentaram 6,1 vezes mais chance de apresentar padrão adiposidade central elevada do que os adolescentes com 10 a 11 anos (IC95% 2,32-16,04), assim como os púberes apresentaram 3,2 vezes este mesmo padrão em relação aos pré-púberes (IC95%1,14-8,85). A partir da comparação entre os dois padrões de referencia de classificação do excesso de peso por meio do IMC, observou-se que a sensibilidade foi de 79,3% para o critério IOTF e de 88,9% para WHO e a especificidade foi de 94,7% e 89,9%, respectivamente. O nível de concordância foi maior para o critério IOTF (Kappa=0,70 x Kappa=0,64). Em relação à construção das equações preditivas de gordura corporal, do total de 106 meninos e 112 meninas, foram desenvolvidas duas equações para estimar MG e duas para MLG, considerando o sexo. No sexo masculino, a equação para estimar a MG incluiu as variáveis idade, punho, quadril e perímetro abdominal (R2=0,552; AIC=416,04) e MLG, idade, punho e antebraço (R2=0,869; AIC=578,24). Enquanto que no feminino, MG foi estimada pelas variáveis punho, perímetro do abdômen, do quadril, da coxa proximal e da panturrilha (R2=0,838; AIC=415,36); e a MLG por idade, punho, perímetro do abdômen, do quadril e da panturrilha (R2=0,878; AIC=512,48). Conclui-se que os adolescentes tinham elevada prevalência de excesso de adiposidade corporal e de pressão arterial elevada. Tanto o padrão excesso de adiposidade quanto adiposidade central elevada constituem-se em padrões de risco. O padrão excesso de adiposidade foi associado à pressão arterial, história familiar positiva de FRDCV e maturação sexual em meninos. O critério IOTF mostrou-se menos sensível, mais específico, com maior nível de concordância e maior probabilidade de identificar corretamente o excesso de gordura corporal nos adolescentes avaliados. Quatro equações foram desenvolvidas para a estimativa da MG e MLG em adolescentes. As equações desenvolvidas para estimar a MG no sexo feminino e MLG para ambos os sexos apresentaram valores elevados de coeficiente de determinação ajustados e, portanto, são as preferenciais. Este estudo foi realizado com a participação de equipe multidisciplinar composta por professores da área de Nutrição, Endocrinologia Pediátrica, Estatística, Educação Física, discentes do Curso de Graduação em Nutrição e residentes em Pediatria

Influência da hereditariedade nas capacidades motoras, na aptidão física e antropometria

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Avaliação de um método de cromatografia em fase gasosa head space e estudo da estabilidade do etanol em amostras de sangue

The ethanol is the most overused psychoactive drug over the world; this fact makes it one of the main substances required in toxicological exams nowadays. The development of an analytical method, adaptation or implementation of a method known, involves a process of validation that estimates its efficiency in the laboratory routine and credibility of the method. The stability is defined as the ability of the sample of material to keep the initial value of a quantitative measure for a defined period within specific limits when stored under defined conditions. This study aimed to evaluate the method of Gas chromatography and study the stability of ethanol in blood samples, considering the variables time and temperature of storage, and the presence of preservative and, with that check if the conditions of conservation and storage used in this study maintain the quality of the sample and preserve the originally amount of analyte present. Blood samples were collected from 10 volunteers to evaluate the method and to study the stability of ethanol. For the evaluation of the method, part of the samples was added to known concentrations of ethanol. In the study of stability, the other side of the pool of blood was placed in two containers: one containing the preservative sodium fluoride 1% and the anticoagulant heparin and the other only heparin, was added ethanol at a concentration of 0.6 g/L, fractionated in two bottles, one being stored at 4ºC (refrigerator) and another at -20ºC (freezer), the tests were performed on the same day (time zero) and after 1, 3, 7, 14, 30 and 60 days of storage. The assessment found the difference in results during storage in relation to time zero. It used the technique of headspace associated with gas chromatography with the FID and capillary column with stationary phase of polyethylene. The best analysis of chromatographic conditions were: temperature of 50ºC (column), 150ºC (jet) and 250ºC (detector), with retention time for ethanol from 9.107 ± 0.026 and the tercbutanol (internal standard) of 8.170 ± 0.081 minutes, the ethanol being separated properly from acetaldehyde, acetone, methanol and 2-propanol, which are potential interfering in the determination of ethanol. The technique showed linearity in the concentration range of 0.01 and 3.2 g/L (0.8051 x + y = 0.6196; r2 = 0.999). The calibration curve showed the following equation of the line: y = x 0.7542 + 0.6545, with a linear correlation coefficient equal to 0.996. The average recovery was 100.2%, the coefficients of variation of accuracy and inter intra test showed values of up to 7.3%, the limit of detection and quantification was 0.01 g/L and showed coefficient of variation within the allowed. The analytical method evaluated in this study proved to be fast, efficient and practical, given the objective of this work satisfactorily. The study of stability has less than 20% difference in the response obtained under the conditions of storage and stipulated period, compared with the response obtained at time zero and at the significance level of 5%, no statistical difference in the concentration of ethanol was observed between analysis. The results reinforce the reliability of the method of gas chromatography and blood samples in search of ethanol, either in the toxicological, forensic, social or clinic

Utilizando processos geométricos da história da matemática para o ensino de equações do 2º grau

The present work had as principal objective to analyze the, 9th grade students understanding about the solutions of an equation of the 2° degree, using geometric processes of the History of the Mathematics. To do so, the research had as base the elaboration and application of a group of teaching activities, based on Jean Piaget's construtivism. The research consisted of a methodological intervention, that has as subjects the students of a group of 9th grade of the State School José Martins de Vasconcelos, located in the municipal district of Mossoró, Rio Grande do Norte. The intervention was divided in three stages: application of an initial evaluation; development of activities‟ module with emphasis in constructive teaching; and the application of the final evaluation. The data presented in the initial evaluation revealed a low level of the students' understanding with relationship to the calculation of areas of rectangles, resolution of equations of the 1st and 2nd degrees, and they were to subsidize the elaboration of the teaching module. The data collected in the initial evaluation were commented and presented under descriptive statistics form. The results of the final evaluation were analyzed under the qualitative point of view, based on Richard Skemp's theory on the understanding of mathematical concepts. The general results showed a qualitative increase with relationship to the students' understanding on the mathematical concepts approached in the intervention. Such results indicate that a methodology using the previous student‟s knowledge and the development of teaching activities, learning in the construtivist theory, make possible an understanding on the part of the students concerning the thematic proposal