Estudo cinético da degradação térmica e catalítica de petróleo pesado usando Al-MCM-41

The mesoporous nanostructured materials have been studied for application in the oil industry, in particular Al-MCM-41, due to the surface area around 800 to 1.000 m2 g-1 and, pore diameters ranging from 2 to 10 nm, suitable for catalysis to large molecules such as heavy oil. The MCM-41 has been synthesized by hydrothermal method, on which aluminum was added, in the ratio Si/Al equal to 50, to increase the generation of active acid sites in the nanotubes. The catalyst was characterized by X-ray diffraction (XRD), surface area by the BET method and, the average pore volume BJH method using the N2 adsorption, absorption spectroscopy in the infrared Fourier Transform (FT-IR) and determination of surface acidity with application of a probe molecule - n-butylamine. The catalyst showed well-defined structural properties and consistent with the literature. The overall objective was to test the Al-MCM-41 as catalyst and thermogravimetric perform tests, using two samples of heavy oil with API º equal to 14.0 and 18.5. Assays were performed using a temperature range of 30-900 ° C and heating ratios (β) ranging from 5, 10 and 20 °C min-1.The aim was to verify the thermogravimetric profiles of these oils when subjected to the action of the catalyst Al- MCM-41. Therefore, the percentage ranged catalyst applied 1, 3, 5, 10 and 20 wt%, and from the TG data were applied two different kinetic models: Ozawa-Flynn-Wall (OFW) and Kissinger-Akahrira-Sunose (KAS).The apparent activation energies found for both models had similar values and were lower for the second event of mass loss known as cracking zone, indicating a more effective performance of Al-MCM-41 in that area. Furthermore, there was a more pronounced reduction in the value of activation energy for between 10 and 20% by weight of the oil-catalyst mixture. It was concluded that the Al-MCM-41 catalyst has applicability in heavy oils to reduce the apparent activation energy of a catalyst-oil system, and the best result with 20% by weight of Al-MCM-41

Degradação térmica e catalítica do resíduo atmosférico de petróleo (RAT), utilizando materiais nanoestruturados do tipo SBA-15

In this work were synthesized and characterized the materials mesoporous SBA-15 and Al- SBA-15, Si / Al = 25, 50 and 75, discovered by researchers at the University of California- Santa Barbara, USA, with pore diameters ranging from 2 to 30 nm and wall thickness from 3.1 to 6.4 nm, making these promising materials in the field of catalysis, particularly for petroleum refining (catalytic cracking), as their mesopores facilitate access of the molecules constituting the oil to active sites, thereby increasing the production of hydrocarbons in the range of light and medium. To verify that the materials used as catalysts were successfully synthesized, they were characterized using techniques of X-ray diffraction (XRD), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). Aiming to check the catalytic activity thereof, a sample of atmospheric residue oil (ATR) from the pole Guamaré-RN was performed the process by means of thermogravimetry and thermal degradation of catalytic residue. Upon the curves, it was observed a reduction in the onset temperature of the decomposition process of catalytic ATR. For the kinetic model proposed by Flynn-Wall yielded some parameters to determine the apparent activation energy of decomposition, being shown the efficiency of mesoporous materials, since there was a decrease in the activation energy for the reactions using catalysts. The ATR was also subjected to pyrolysis process using a pyrolyzer with gas chromatography coupled to a mass spectrometer. Through the chromatograms obtained, there was an increase in the yield of the compounds in the range of gasoline and diesel from the catalytic pyrolysis, with emphasis on Al-SBA-15 (Si / Al = 25), which showed a percentage higher than the other catalysts. These results are due to the fact that the synthesized materials exhibit specific properties for application in the process of pyrolysis of complex molecules and high molecular weight as constituents of the ATR

Análise da degradação ambiental das áreas de preservação permanente localizadas no estuário do rio Ceará-mirim/RN

The purpose of this paper is to identify and analyze the main environmental impacts taking place in the permanent preservation areas located in the Ceará-Mirim River estuary/RN and its surrounding areas. For that, the study was divided in two chapters, structured in the shape of a scientific paper. The first is a theoretical proposition on the occupation of the APPs in light of the discussion of the geographic space and the sustainability of the development, where a bibliographical review was made emphasizing the production of the geographic space, the sustainability of the development and the permanent preservation areas. In the second chapter, from a systemic approach, geoprocessing techniques and the adaptation of the Pressure-State- Response Indicators System were used, the latter being developed by the Organization for Economic Co-operation and Development OECD. Therefore, from the methodological approaches used, it's been observed that the use of permanent preservation areas for purposes other than those determined in the legislation and, mainly guided by capitalist interests, leads to the environmental degradation of these areas, fact which has been confirmed in the empiric study conducted in the second chapter, where it was possible to identify a series of environmental impacts such as: deforestation of mangrove and riparian vegetation for carciniculture implantation, the devastation of dune areas caused by the urban expansion in the coastal stretch and siltation of fluvial channel

Potencialidade à degradação na microbacia Riacho Passagem/RN

A degradação dos recursos naturais é talvez o principal problema da região do semiárido brasileiro, e essa degradação é principalmente resultante das perdas de solo, decorrente do processo erosivo. Na busca de melhor conhecer esta problemática vem sendo empregado o processo de modelagem ambiental, cujo objetivo é identificar e propor soluções para a degradação dos solos. Nesse sentido, o trabalho aplica o modelo da Equação Universal de Perda de Solos (EUPS), desenvolvido nos Estados Unidos ao longo da década de 1950, agregado as ferramentas de geoprocessamento, informações de sensoriamento remoto e Sistemas de Informações Geográficas (SIGs). A área de estudo é a Microbacia Riacho Passagem localizada na região oeste do Estado do Rio Grande do Norte, a microbacia tem uma área de 221,7Km² e esta inserida no semiárido, região Nordeste do Brasil. A metodologia utilizada consiste: em agrupar as variáveis da EUPS no ambiente SIG utilizando imagens de satélite, levantamentos bibliográficos e trabalhos de campo. Para determinação das extensões das vertentes foi empregado o Modelo RAMPA, e para adequar a EUPS as condições da área de estudo, foram realizados ajuste através de modelos estatísticos, aperfeiçoando o trabalho e os resultados gerados pelo modelo. Ao fim do processo foi desenvolvida uma pseudo linguagem no aplicativo Linguagem Espacial para Geoprocessamento Algébrico (LEGAL) disponível no software SPRING versão 5.1.2 servindo de suporte para o processamento das informações contidas no banco de dados, base da EUPS. Os resultados demonstram que inicialmente é necessário delimitar com precisão o período seco e chuvoso, informação fundamental para a EUPS, uma vez que o trabalho busca identificar a perda de solo por erosão hídrica. O modelo RAMPA apresentou-se satisfatório e com elevado potencial de aplicação na determinação dos comprimentos de vertentes utilizando imagens de radar. Quanto ao comportamento das extensões de vertentes, na microbacia, o mesmo apresentou uma pequena variação na porção leste, maiores vertentes, área próxima a desembocadura. Após a aplicação do modelo o valor máximo de perda de solo foi 88 ton/ha.ano com núcleos localizados no NEOSSOLOS LITÓLICOS e o mínimo 0,01 ton/ha.ano localizado no domínio dos LATOSSOLOS e NEOSSOLOS FLÚVICOS. A erosão provoca diminuição do perfil de solo, principalmente nos NEOSSOLOS LITÓLICOS, resultando em alteração no balanço hídrico e conseqüentemente aumento da temperatura do solo, podendo desencadear a desertificação. Os resultados e a metodologia do presente trabalho poderão ser aplicados na busca pelo desenvolvimento sustentável, na região do semiárido brasileiro, auxiliando na compreensão do binômio uso do solo e capacidade de suporte do meio natural.

Degradação ambiental no município de Cerro Corá RN por técnicas de geoprocessamento

The processes of occupation and evolution of natural environments as a result of a disorderly process of implementing economic practices agrosilvopastoris play today an important role in the degradation process of changing the landscape and natural resources of the semiarid Northeast. The Serra de Santana has natural elements important to the state of Rio Grande do Norte as the source of the Potengi. Therefore, this study aimed to analyze the degree of degradation in the municipality of Cerro Cora - RN. We used satellite images Landsat-5 and census data for the year 2008. The method made use of geotechnology which includes land use, NDVI, rainfall, livestock and erodibility in the evaluation of environmental degradation, as well as satellite images of Landsat TM-5, in the years 1984, 1995 and 2008, letters of NDVI, census data regarding the socioeconomic obtained from IBGE. The results showed that the absolute majority in the municipality of Cerro Cora has a low to medium susceptibility, which together represent 63.92% of the municipality, with a regression of disturbed areas and the areas of agriculture, and a recovery of the areas of Caatinga , coming to occupy currently 92% of the municipal territory. A Geographic Information System is indispensable to environmental monitoring of Cerro Cora / RN

Diagnóstico da degradação ambiental no município de Areia Branca-RN por geotecnologias

The municipality of Areia Branca is within the mesoregion of West Potiguar and within the microregion of Mossoró, covering an area of 357,58 km2. Covering an area of weakness in terms of environmental, housing, together with the municipality of Grossos-RN, the estuary of River Apodi-Mossoró. The municipality of Areia Branca has historically suffered from a lack of planning regarding the use and occupation of land as some economic activities, attracted by the extremely favorable natural conditions, have exploited their natural resources improperly. The aim of this study is to quantify and analyze the environmental degradation in the municipality. Thus initially was performed a characterization of land use using remote sensing, geoprocessing and geographic information system GIS in order to generate data and information on the municipal scale, which may serve as input to the environmental planning and land use planning in the region. From this perspective, were used a Landsat 5 image TM sensor for the year 2010. In the processing of this image was used SPRING 5.2 and applied a supervised classification using the classifier regions, which was employed Bhattacharya Distance method with a threshold at 30%. Thus was obtained the land use map that was analyzed the spatial distribution of different types of the use that is occurring in the city, identifying areas that are being used incorrectly and the main types of environmental degradation. And further, were applied the methodology proposed by Beltrame (1994), Physical Diagnosis Conservationist under some adaptations for quantifying the level of degradation or conservation study area. As results, the indexes were obtained for the parameters in the proposed methodology, allowing quantitatively analyze the degradation potential of each sector. From this perspective, considering a scale of 0 to 100, sector A and sector B had value 31.20 units of risk of physical deterioration. And the C sector, has shown its value - 34.64 units degradation risk and should be considered a priority in relation to the achievement of conservation actions

Processos sócio-ambientais relacionados às situações de degradação na região do Rio Doce, Natal/RN

Natal is a medium-sized coastal city (800.000 inhabitants), capital of the State of Rio Grande do Norte, in the Northeast of Brazil. According to statistics published by the IBGE (2000), the area of Natal that stretches from Redinha to Lagoa Azul holds about 12% of the municipal population. Part of this area is bordered by a watercourse, the Rio Doce, which has been afflicted by a range of socio-environmental problems over the years. This study was carried out with the aims of 1) identifying the socio-environmental processes related to urban expansion, with an emphasis on those causing environmental degradation in this region; b) analysing the perception of the target population in relation to the environment it occupies; and c) determining the socioeconomic profile of the local residents and the sanitary facilities available to them. A survey was carried out by conducting interviews and completing questionnaires with the residents to assess the situation both qualitatively and quantitatively in the communities of Caiana, Pajussara Sítio, Gramoré Povoado and Gramoré Sítio, as well as by conducting bibliographical and documentary research. It was discovered that the sanitary conditions of the riverside dwellers are precarious and only 1% of the houses in the suburbs mentioned are connected to the public sewers. It was established that the Rio Doce is intensively exploited through the extraction of sand for the building trade, irrigation of riverside vegetable plots and use of the water for bathing, washing of clothes and leisure. It was also found that about 40% of the population resident in this area has migrated from the rural zone, which is one of the factors rendering it difficult for them to adapt to the urban setting. Such information can be of use to the authorities in the environmental planning of these districts and their sustainable development

Degradação fotocatalítica oxidativa do fenol utilizando carvão obtido da pirólise de diferentes biomassas

The modern industrial progress has been contaminating water with phenolic compounds. These are toxic and carcinogenic substances and it is essential to reduce its concentration in water to a tolerable one, determined by CONAMA, in order to protect the living organisms. In this context, this work focuses on the treatment and characterization of catalysts derived from the bio-coal, by-product of biomass pyrolysis (avelós and wood dust) as well as its evaluation in the phenol photocatalytic degradation reaction. Assays were carried out in a slurry bed reactor, which enables instantaneous measurements of temperature, pH and dissolved oxygen. The experiments were performed in the following operating conditions: temperature of 50 °C, oxygen flow equals to 410 mL min-1 , volume of reagent solution equals to 3.2 L, 400 W UV lamp, at 1 atm pressure, with a 2 hours run. The parameters evaluated were the pH (3.0, 6.9 and 10.7), initial concentration of commercial phenol (250, 500 and 1000 ppm), catalyst concentration (0, 1, 2, and 3 g L-1 ), nature of the catalyst (activated avelós carbon washed with dichloromethane, CAADCM, and CMADCM, activated dust wood carbon washed with dichloromethane). The results of XRF, XRD and BET confirmed the presence of iron and potassium in satisfactory amounts to the CAADCM catalyst and on a reduced amount to CMADCM catalyst, and also the surface area increase of the materials after a chemical and physical activation. The phenol degradation curves indicate that pH has a significant effect on the phenol conversion, showing better results for lowers pH. The optimum concentration of catalyst is observed equals to 1 g L-1 , and the increase of the initial phenol concentration exerts a negative influence in the reaction execution. It was also observed positive effect of the presence of iron and potassium in the catalyst structure: betters conversions were observed for tests conducted with the catalyst CAADCM compared to CMADCM catalyst under the same conditions. The higher conversion was achieved for the test carried out at acid pH (3.0) with an initial concentration of phenol at 250 ppm catalyst in the presence of CAADCM at 1 g L-1 . The liquid samples taken every 15 minutes were analyzed by liquid chromatography identifying and quantifying hydroquinone, p-benzoquinone, catechol and maleic acid. Finally, a reaction mechanism is proposed, cogitating the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. Applying the model of Langmuir-Hinshelwood along with a mass balance it was obtained a system of differential equations that were solved using the Runge-Kutta 4th order method associated with a optimization routine called SWARM (particle swarm) aiming to minimize the least square objective function for obtaining the kinetic and adsorption parameters. Related to the kinetic rate constant, it was obtained a magnitude of 10-3 for the phenol degradation, 10-4 to 10-2 for forming the acids, 10-6 to 10-9 for the mineralization of quinones (hydroquinone, p-benzoquinone and catechol), 10-3 to 10-2 for the mineralization of acids.

Avaliação do tratamento eletroquímico (direto e indireto) como alternativa de degradação do corante azul de metileno

Textile industry has been a cause of environmental pollution, mainly due to the generation of large volumes of waste containing high organic loading and intense color. In this context, this study evaluated the electrochemical degradation of synthetic effluents from textile industry containing Methylene Blue (AM) dye, using Ti/IrO2-Ta2O5 and Ti/Pt anodes, by direct and indirect (active chlorine) electrooxidation. We evaluated the influence of applied current density (20, 40 and 60 mA/cm2 ), and the presence of different concentrations of electrolyte (NaCl and Na2SO4), as well as the neutral and alkaline pH media. The electrochemical treatment was conducted in a continuous flow reactor, in which the electrolysis time of the AM 100 ppm was 6 hours. The performance of electrochemical process was evaluated by UV-vis spectrophotometry, chemical oxygen demand (COD) and total organic carbon (TOC). The results showed that with increasing current density, it was possible to obtain 100 % of color removal at Ti/IrO2-Ta2O5 and Ti/Pt electrodes. Regarding the color removal efficiency, increasing the concentration of electrolyte promotes a higher percentage of removal using 0,02 M Na2SO4 and 0,017 M NaCl. Concerning to the aqueous medium, the best color removal results were obtained in alkaline medium using Ti/Pt. In terms of organic matter, 86 % was achieved in neutral pH medium for Ti/Pt; while a 30 % in an alkaline medium. To understand the electrochemical behavior due to the oxygen evolution reaction, polarization curves were registered, determining that the presence of NaCl in the solution favored the production of active chlorine species. The best results in energy consumption and cost were obtained by applying lower current density (20 mA/cm2 ) in 6 hours of electrolysis.

Estudo comparativo dos processos eletroquímicos oxidativos avançados (PEOAs) no tratamento de efluentes contendo corantes orgânicos de difícil degradação

Organic dyes have been widely used in various branches of dyeing industries. These compounds are known to be very toxic, mutagenic, cancinogenic only cause aesthetic pollution and irreversible damage to aquatic ecosystems and human health. Are recalcitrant contaminants due to its high stability and resistance to photobleaching and bio. Given this context, the search for technologies that can minimize the effects of such pollutants is required. In recent decades the Electrochemical Oxidation Process Advanced (PEOAs) based on the generation of strongly oxidizing species (radicals ●OH) offer promising approaches for the prevention of problems caused by industrial effluents. This study analyzed the degradation and mineralization of textile dyes and the study of a real effluent in order to assess the feasibility of PEOAs: Electro-Fenton (EF), Photo Electro-Fenton (PEF) and anodic oxidation (AO), and these methods still was studied the Solar Fotoelectro-Fenton (SPEF) in a pre-pilot plant, in order to study the electrochemical treatment on an industrial scale. In the study has compared the effect of PEOAs in the removal of color, TOC and decay kinetics of degradation of the compounds, and also for using the Congo Red (CR) SPEF studies were performed mineralization current efficiency (MCE). The best results are given to the treatment of the PEF for all the studied dyes. From the results it was possible to choose the PEF as the most effective and promising for application of treatment when compared to other methods of treatment, and prove from SPEF that the process can be used in industrial scales, since this method PEF has been improved and solar irradiation replaced the UVA lamp.

Estudo comparativo dos processos eletroquímicos oxidativos avançados (PEOAs) no tratamento de efluentes contendo corantes orgânicos de difícil degradação

Organic dyes have been widely used in various branches of dyeing industries. These compounds are known to be very toxic, mutagenic, cancinogenic only cause aesthetic pollution and irreversible damage to aquatic ecosystems and human health. Are recalcitrant contaminants due to its high stability and resistance to photobleaching and bio. Given this context, the search for technologies that can minimize the effects of such pollutants is required. In recent decades the Electrochemical Oxidation Process Advanced (PEOAs) based on the generation of strongly oxidizing species (radicals ●OH) offer promising approaches for the prevention of problems caused by industrial effluents. This study analyzed the degradation and mineralization of textile dyes and the study of a real effluent in order to assess the feasibility of PEOAs: Electro-Fenton (EF), Photo Electro-Fenton (PEF) and anodic oxidation (AO), and these methods still was studied the Solar Fotoelectro-Fenton (SPEF) in a pre-pilot plant, in order to study the electrochemical treatment on an industrial scale. In the study has compared the effect of PEOAs in the removal of color, TOC and decay kinetics of degradation of the compounds, and also for using the Congo Red (CR) SPEF studies were performed mineralization current efficiency (MCE). The best results are given to the treatment of the PEF for all the studied dyes. From the results it was possible to choose the PEF as the most effective and promising for application of treatment when compared to other methods of treatment, and prove from SPEF that the process can be used in industrial scales, since this method PEF has been improved and solar irradiation replaced the UVA lamp.

Avaliação do desempenho da paligorsquita modificada e do carvão da pirólise do lodo de esgoto no processo de degradação fotocatalítica do fenol

The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).

Avaliação do desempenho da paligorsquita modificada e do carvão da pirólise do lodo de esgoto no processo de degradação fotocatalítica do fenol

The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).

Modelagem da degradação de fenol em efluentes aquosos através do processo de foto-fenton

Advanced Oxidation Processes (AOP) are techniques involving the formation of hydroxyl radical (HO•) with high organic matter oxidation rate. These processes application in industry have been increasing due to their capacity of degrading recalcitrant substances that cannot be completely removed by traditional processes of effluent treatment. In the present work, phenol degrading by photo-Fenton process based on addition of H2O2, Fe2+ and luminous radiation was studied. An experimental design was developed to analyze the effect of phenol, H2O2 and Fe2+ concentration on the fraction of total organic carbon (TOC) degraded. The experiments were performed in a batch photochemical parabolic reactor with 1.5 L of capacity. Samples of the reactional medium were collected at different reaction times and analyzed in a TOC measurement instrument from Shimadzu (TOC-VWP). The results showed a negative effect of phenol concentration and a positive effect of the two other variables in the TOC degraded fraction. A statistical analysis of the experimental design showed that the hydrogen peroxide concentration was the most influent variable in the TOC degraded fraction at 45 minutes and generated a model with R² = 0.82, which predicted the experimental data with low precision. The Visual Basic for Application (VBA) tool was used to generate a neural networks model and a photochemical database. The aforementioned model presented R² = 0.96 and precisely predicted the response data used for testing. The results found indicate the possible application of the developed tool for industry, mainly for its simplicity, low cost and easy access to the program.

Modelagem da degradação de fenol em efluentes aquosos através do processo de foto-fenton

Advanced Oxidation Processes (AOP) are techniques involving the formation of hydroxyl radical (HO•) with high organic matter oxidation rate. These processes application in industry have been increasing due to their capacity of degrading recalcitrant substances that cannot be completely removed by traditional processes of effluent treatment. In the present work, phenol degrading by photo-Fenton process based on addition of H2O2, Fe2+ and luminous radiation was studied. An experimental design was developed to analyze the effect of phenol, H2O2 and Fe2+ concentration on the fraction of total organic carbon (TOC) degraded. The experiments were performed in a batch photochemical parabolic reactor with 1.5 L of capacity. Samples of the reactional medium were collected at different reaction times and analyzed in a TOC measurement instrument from Shimadzu (TOC-VWP). The results showed a negative effect of phenol concentration and a positive effect of the two other variables in the TOC degraded fraction. A statistical analysis of the experimental design showed that the hydrogen peroxide concentration was the most influent variable in the TOC degraded fraction at 45 minutes and generated a model with R² = 0.82, which predicted the experimental data with low precision. The Visual Basic for Application (VBA) tool was used to generate a neural networks model and a photochemical database. The aforementioned model presented R² = 0.96 and precisely predicted the response data used for testing. The results found indicate the possible application of the developed tool for industry, mainly for its simplicity, low cost and easy access to the program.