Um estudo sobre custos de elaboração de material didático e tutoria em EaD online em uma Instituição de Ensino Superior no Brasil

This study has as main objective to verify the proportionality of the costs with elaboration of didactic material and costs with tutelage and instruction incurred in a higher education institution, located in national territory, and that offers a degree course in the education area in the modality of EaD online. The purpose of the measurement of this proportionality of the costs was of answering these they are, among other, the relevant costs incurred by the institution research object. This is a research of exploratory stamp whose methodological procedure adopted for your development, in what it refers the collection, analysis of the data and the investigation means, it is the case study, as well as the documental and bibliographical research. The found results indicate that the costs with elaboration of didactic material and the costs with tutelage and instruction are relevant, however they are not the only ones considered as such. The costs involved with acquisition and operation of specific softwares they also constitute an relevant costs. The structure of the costs can be altered in agreement with the analyzed period and in agreement with the characteristics of synchronism of the offered course. It was also verified that the technology used in this education modality it ends up generating additional costs incurred with professionals of specific knowledge in technology

O desenvolvimento da indústria da reciclagem dos materiais no Brasil: motivação econômica ou benefício ambiental conseguido com a atividade?

A indústria de reciclagem vem se desenvolvendo no Brasil desde o começo dos anos noventa, o que resulta em elevados índices de reciclagem e tecnologia de ponta na reciclagem de alguns materiais. Requisitada como estratégia para a gestão dos resíduos no destino final, a reciclagem possui a particularidade de ser uma atividade econômica bastante rentável. Este artigo analisa os índices da indústria de reciclagem dos materiais no Brasil. Com base nos resultados obtidos através da consulta bibliográfica e dados estatísticos oriundos de fontes primárias e secundárias, conclui-se que a atividade da reciclagem dos materiais no Brasil se presta a satisfazer exclusivamente às demandas econômicas do setor. Neste sentido, a contribuição ambiental da reciclagem perde relevância visto que o crescimento da atividade está condicionado às demandas da cadeia produtiva industrial

O papel da tecnologia cênica e seus desdobramentos para uma economia da produção cultural no nordeste

O papel da tecnologia na produção contemporânea em artes cênicas vem influenciando profundamente as formas de recepção e produção de Teatro, Dança, espetáculos de Circo, shows musicais, entre outras manifestações espetaculares organizadas. Sua aplicação se estende amplamente a outras áreas que necessitam enfatizar o caráter cênico de seus processos de fruição como é o caso dos museus, feiras de ciências, exibições e mostras em artes visuais e o aparato tecnológico de luz, som e configuração espacial usados para estes fins. Neste sentido, o desenvolvimento deste tipo de tecnologia vem gerando e alimentando cadeias produtivas que movimentam uma economia da produção cultural e criam uma rede de relações articuladas em diferentes níveis de atuação, envolvendo produtores de equipamento, fornecedores, lighting designers, cenógrafos, profissionais de sonorização, arquitetos, técnicos de montagem e operação, instituições ensino especializadas, associações de área, entre outros. O foco deste trabalho se concentra em demonstrar como a análise de demandas de tecnologia cênica articuladas pelos sistemas de produção cultural, em particular na região Nordeste do Brasil, possibilitam compreender modelos de organização em curso, contribuindo para o desenvolvimento de uma reflexão multidisciplinar acerca dos processos de produção artística de natureza cênica e como esta produção é afetada pelos limites e possibilidades dos aspectos que caracterizam uma economia destas produções

Desenvolvendo e gerenciando compostagem de resíduos sólidos urbanos: para geração de renda e repasse de tecnologia à acrevi

Nowadays, as well as in the past decades, the dumping of biodegradable organic waste in landfill is common practice in Brazil, as well as in most parts of the world. Nevertheless due to its rapid decomposition and release of odors, this practice hamper’s the operation and implementation of a recycling system. These facts encouraged our research to find an efficient system for the management of organic waste, not only for the use of official workers responsible for managing these wastes, but also for non-governmental institutions. The Recycling for Life Community Association – ACREVI (Associação Comunitária Reciclando para a Vida), together with the municipal authorities of Mossoró-RN, Brazil, have assumed the social role of collecting and recycling solid waste produced by most of the local population. However, it was observed that the organic waste it collected was not receiving any treatment. This present work aims to make compost with mixed waste (green waste and organic household), and then do chemical analysis of the material in view to use the waste as organic fertilizer. The objective being: to share the knowledge acquired by putting it into a very simple language accessible to people with little education. The experiment was conducted at ACREVI, Mossoró (RN), and the compost was obtained following the method "windrow", forming three cells (I, II, III) with conical shape, dimensions of 1.6 meters and 2.0 meters in diameter for cells I and II, and 1.0 meters high and 2.0 meters in diameter for cell III. The process was accompanied by analysis: CHN elemental, a variation of cell temperature, humidity, pH, TKN, bulk density, nutrients and heavy metals. Stabilized organic compounds reached the C/N ratio of 10.4/1 cell I and 10.4/1 in the cell II in the cell, showing how good soil conditions, with potential to improve the physical properties of any soil and pH acid soils, has presented the cell III at the end of the process the C/N 26/1, is a high ratio may be associated with the stack size III, thus changing the optimal conditions for the occurrence of the process. The levels of heavy metals in the analyzed compounds were lower than those established by the SDA normative instruction, Nº 27, of 5 June, 2006. The use of pruning trees and grass are used in small-scale composting, while generating a quality compost in the final process, it also created an important condition for a correct sizing of the composting piles. Under the studied conditions it is not advisable to use cells with a height of 1.00 m in height and 2.00 m in diameter, as these do not prevent the rapid dissipation of heat and thus can not be a good product at the end of composting. The composting process in the shed of the association and the preparation of the primer enabled the development of an alternative technology to generate income for members of ACREVI.

Cultura da representação de arquitetura: concursos de projeto, Brasil 2008-2011

This thesis deepens the issues pointed out in our master's dissertation (2009) and the following texts about architectural projects representation presented in architectural competitions. It aims to identify the representation culture of projects from architectural competitions. Were there common ways to argue among successful architects? Which were them? How extent the various arguments are consistent or what is the discursive coherent? Which interlocutors were privileged in argumentation, the requesting ones or those that evaluate the proposals? To answer these questions, we began from a correlation suggested by TOSTRUP (1999) among some drawings – plans, sections, façades, perspective, details or texts - and emphasized aspects in a project argumentation (place, zoning, environmental comfort, energy efficiency, etc.). On the top of this, we add functions that DURAND (2003) indicates relevant to architectural representations: conception, communication or seduction and execution. Other writers, such as COLLINS (1971), COLLYER (2004), MOON (2005), BANDEIRA (2007), and OXMAN (2008) in different ways, offered us subsidies to relate kinds of architectural representations with specific functions or strategies of persuasion. Thus, for 08 Brazilian competitions, occurred between 2008 – 2011, we analyzed the requests from the brief of the official announcement, the evaluations of the jurors, and the boards of the winning designs – graphical and textual representations. That allowed us to observe a representation culture predominantly based on perspectives and plans, even been articulated in different arguments. This may emphasize since objective aspects as building execution to appeals of mere visual seduction. In what regards to the audience, even when the official announcement resembled to one another, the winners’ argumentation were different, suggesting a possible jury’s privilege as an interlocutor.

Um estudo sobre o ensino de evaporação no contexto ciência, tecnologia e sociedade

The scope of this Dissertation is propose the teaching of the evaporation based on the approach Science, Technology and Society (STS) because we believe that this type of approach is able to provide students with a more critical and conscious learning about science. Moreover, with this search, it´s possible to show for students the importance of role to play for them as citizens in decision making aimed to benefit all who are part of the community to which they belong. From this perspective, broached the theme evaporation in a region characterized by constant lack of water for consumption, the municipality of Santa Cruz/RN because, despite the creation of dams to regulate the flow of rivers and increase the availability of water during periods of scarcity, we know that these reservoirs have a large free liquid surface allowing high water loss by evaporation. Thus, evaporation affects the performance of reservoirs for water supply and irrigation, being a phenomenon of particular interest to study. To this end, a questionnaire in order to identify students' preconceptions on the subject was applied. Was then prepared and conducted a workshop geared toward students majoring in Physics Campus Santa Cruz, Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN). The completion of the workshop served as a space for discussion of the topic within the context of the municipality of Santa Cruz/RN. As a product, we suggest to physics teachers a guide with recommendations to be taken into account when they teach this subject

Metodologia para gerenciamento de projetos em tecnologia da informação baseada no guia PMBOK: um estudo de caso na Secretaria de Estado da Saúde Pública do Rio Grande do Norte

Nowadays the search for growth makes organizations seeking competitive advantages, project management shares this goal, through techniques that assist in the search for an improved management of the various fields of knowledge through a design methodology. The world is driven by projects and the search for ways to better manage activities such as time, cost and term towards the success of a particular project is something constant. A major contribution that IT can make to the health sector is the support for the management area. IT can integrate processes, optimize the interconnection between the various sectors, make hospitals have access to inside information of good quality, as well as support in the healthcare area, sharing pictures, uniting the various aspects of nursing and nursing service. The major challenge faced by the SESAP Information Technology sector at present is in project management in IT , which does not exist makes investments in the area are increasingly difficult due to this deficiency in management develop their own systems without cost additional to the State. This study seeks to build and strengthen the Project Management within the Department of Health through the implementation of a project office that will manage the final result of this work methodology based on PMBOK, and still show the functionality applied to development the state Hospital Management System that will later be installed on all Regional Health Units and proposing measures for the sustainability and development of the sector amid the difficulties of the current public service. Such action will result in a savings of more than R$ 107,000.00 (one hundred seven thousand) regarding spending private software currently used by the assignment of invested by the State of Rio Grande do Norte user licenses, representing more than 5 % of the total budget of the State Department of Public Health of the State

Transportadores sólidos de oxigênio à base de níquel e cobre suportados em aluminatos para combustão do metano pela tecnologia de recirculação química

In recent years, solid carriers suitable oxygen have been developed for use in different chemical processes recirculation. The success of this technology is directly related to the chemical reactivity and the oxygen storage capacity of the carrier. Thus, research into the development of new materials that can be applied to the process becomes extremely important. Possible candidates are the carriers based on nickel and copper for presenting favorable thermodynamic properties. In this work, aluminates type MAl2O4 (M = Mg and Ca) and M0,9B0,1Al2O4 (B = Ni and Cu) that are used as supports were synthesized by combustion reactions assisted by microwave and calcined at 900°C/2h. Then, the carriers were impregnated with 10% (m/m) of nickel or copper, and subsequently calcined at 600°C/2h to obtain the solid oxygen carriers, which were characterized by X-ray diffraction (XRD) Microscopy scanning electron microscopy (SEM) and temperature programmed reduction (TPR). Reactions simulating the combustion process by chemical recirculation were performed by cycles reduction/oxidation, in order to evaluate the reactivity of carriers. XRD analysis revealed diffraction peaks of the spinel type structures. In the doped substrates were verified the presence of secondary phases, suggesting that all the metal was incorporated into the spinel structure. In solid oxygen carriers, the NiO and CuO phases were observed after impregnation of active phases on different media. The results of evaluations of chemical cycles reduction/oxidation revealed that TSO's impregnated with nickel in various media were more active and are potential candidates for use in the chemical recirculation technology

Especificações e concepções de front-end UHF integrado e multipadrão em tecnologia CMOS 130nm

The Brazilian Environmental Data Collecting System (SBCDA) collects and broadcasts meteorological and environmental data, to be handled by dozens of institutions and organizations. The system space segment, composed by the data collecting satellites, plays an important role for the system operation. To ensure the continuity and quality of these services, efforts are being made to the development of new satellite architectures. Aiming a reduction of size and power consumption, the design of an integrated circuit containing a receiver front-end is proposed, to be embedded in the next SBCDA satellite generations. The circuit will also operate under the requirements of the international data collecting standard ARGOS. This work focuses on the design of an UHF low noise amplifier and mixers in a CMOS standard technology. The specifi- cations are firstly described and the circuit topologies presented. Then the circuit conception is discussed and the design variables derived. Finally, the layout is designed and the final results are commented. The chip will be fabricated in a 130 nm technology from ST Microelectronics.

Aplicação da tecnologia eletroquímica para a remoção e monitoramento de metais pesados em efluentes aquosos

Heavy metals are present in industrial waste. These metals can generate a large environmental impact contaminating water, soil and plants. The chemical action of heavy metals has attracted environmental interest. In this context, this study aimed to test t he performance of electrochemical technologies for removing and quantifying heavy metals. First ly , the electroanalytical technique of stripping voltammetry with glassy carbon electrode (GC) was standardized in order to use this method for the quantificatio n of metals during their removal by electrocoagulation process (EC). A nalytical curves were evaluated to obtain reliability of the determin ation and quantification of Cd 2+ and Pb 2+ separately or in a mixture. Meanwhile , EC process was developed using an el ectrochemical cell in a continuous flow (EFC) for removing Pb 2+ and Cd 2+ . The se experiments were performed using Al parallel plates with 10 cm of diameter (  63.5 cm 2 ) . The optimization of conditions for removing Pb 2+ and Cd 2+ , dissolved in 2 L of solution at 151 L h - 1 , were studied by applying different values of current for 30 min. Cd 2+ and Pb 2+ concentrations were monitored during electrolysis using stripping voltammetry. The results showed that the removal of Pb 2 + was effective when the EC pro cess is used, obtaining removals of 98% in 30 min. This behavior is dependent on the applied current, which implies an increase in power consumption. From the results also verified that the stripping voltammetry technique is quite reliable deter mining Pb 2+ concentration , when compared with the measurements obtained by atomic absorption method (AA). In view of this, t he second objective of this study was to evaluate the removal of Cd 2+ and Pb 2+ (mixture solution) by EC . Removal efficiency increasing current was confirmed when 93% and 100% of Cd 2+ and Pb 2+ was removed after 30 min . The increase in the current promotes the oxidation of sacrificial electrodes, and consequently increased amount of coagulant, which influences the removal of heavy metals in solution. Adsortive voltammetry is a fast, reliable, economical and simple way to determine Cd 2+ and Pb 2+ during their removal. I t is more economical than those normally used, which require the use of toxic and expensive reagents. Our results demonstrated the potential use of electroanalytical techniques to monitor the course of environmental interventions. Thus, the application of the two techniques associated can be a reliable way to monitor environmental impacts due to the pollution of aquatic ecosystems by heavy metals.

Interface para tecnologia assistiva baseada em eletrooculografia

We propose in this work, a new method of conceptual organization of areas involving assistive technology, categorizing them in a logical and simple manner; Furthermore, we also propose the implementation of an interface based on electroculography, able to generate high-level commands, to trigger robotic, computer and electromechanical devices. To validate the eye interface, was developed an electronic circuit associated with a computer program that captured the signals generated by eye movements of users, generating high-level commands, able to trigger an active bracing and many other electromechanical systems. The results showed that it was possible to control many electromechanical systems through only eye movements. The interface is presented as a viable way to perform the proposed task and can be improved in the signals analysis in the the digital level. The diagrammatic model developed, presented as a tool easy to use and understand, providing the conceptual organization needs of assistive technology

Tecnologia eletroquímica como tratamento alternativo de efluentes derivados da indústria têxtil e petroquímica

In this work, the treatment of wastewater from the textile industry, containing dyes as Yellow Novacron (YN), Red Remazol BR (RRB) and Blue Novacron CD (NB), and also, the treatment of wastewater from petrochemical industry (produced water) were investigated by anodic oxidation (OA) with platinum anodes supported on titanium (Ti/Pt) and boron-doped diamond (DDB). Definitely, one of the main parameters of this kind of treatment is the type of electrocatalytic material used, since the mechanisms and products of some anodic reactions depend on it. The OA of synthetic effluents containing with RRB, NB and YN were investigated in order to find the best conditions for the removal of color and organic content of the dye. According to the experimental results, the process of OA is suitable for decolorization of wastewaters containing these textile dyes due to electrocatalytic properties of DDB and Pt anodes. Removal of the organic load was more efficient at DDB, in all cases; where the dyes were degraded to aliphatic carboxylic acids at the end of the electrolysis. Energy requirements for the removal of color during OA of solutions of RRB, NB and YN depends mainly on the operating conditions, for example, RRB passes of 3.30 kWh m-3 at 20 mA cm-2 for 4.28 kWh m-3 at 60 mA cm-2 (pH = 1); 15.23 kWh m-3 at 20 mA cm-2 to 24.75 kWh m-3 at 60 mA cm-2 (pH 4.5); 10.80 kWh m-3 at 20 mA cm-2 to 31.5 kWh m-3 at 60 mA cm-2 (pH = 8) (estimated data for volume of treated effluent). On the other hand, in the study of OA of produced water effluent generated by petrochemical industry, galvanostatic electrolysis using DDB led to the complete removal of COD (98%), due to large amounts of hydroxyl radicals and peroxodisulphates generated from the oxidation of water and sulfates in solution, respectively. Thus, the rate of COD removal increases with increasing applied current density (15-60 mAcm-2 ). Moreover, at Pt electrode, approximately 50% removal of the organic load was achieved by applying from 15 to 30 mAcm-2 while 80% of COD removal was achieved for 60 mAcm-2 . Thus, the results obtained in the application of this technology were satisfactory depending on the electrocatalytic materials and operating conditions used for removal of organic load (petrochemical and textile effluents) as well as for the removal of color (in the case of textile effluents). Therefore, the applicability of electrochemical treatment can be considered as a new alternative like pretreatment or treatment of effluents derived from textiles and petrochemical industries.

Petrologia das fraturas associadas a feições típicas de dissolução hipogênica na Formação Salitre, Bacia de Irecê, Bahia, Brasil

The recognition of karst reservoirs in carbonate rocks has become increasingly common. However, most karst features are small to be recognized in seismic sections or larger than expected to be investigated with borehole data. One way forward has been the study of analogue outcrops and caves. The present study investigates lithofacies and karst processes, which lead to the generation of the largest system of caves in South America. The study area is located in the Neoproterozoic Una Group in central-eastern Brazil. This province comprises several systems of carbonate caves (Karmann and Sanchéz, 1979), which include the Toca da Boa Vista and Barriguda caves, considered the largest caves in South America (Auler and Smart, 2003). These caves were formed mainly in dolomites of the Salitre Formation, which was deposited in a shallow marine environment in an epicontinental sea (Medeiros and Pereira, 1994). The Salitre Formation in the cave area comprises laminated mud/wakestones, intraclastic grainstones, oncolitic grainstones, oolitic grainstones, microbial laminites, colunar stromatolites, trombolites and fine siliciclastic rocks (marls, shales, and siltites). A thin layer and chert nodules also occur at the top of the carbonate unit. Phosphate deposits are also found. Our preliminary data indicate that folds and associated joints control the main karstification event at the end of the Brasiliano orogeny (740-540 Ma). We recognized five lithofacies in the cave system: (1) Bottom layers of grainstone with cross bedding comprise the main unit affected by speleogenesis, (2) thin grainstone layers with thin siltite layers, (3) microbial laminites layers, (4) layers of columnar stromatolites, and a (5) top layer of siltite. Levels (1) to (3) are affected by intense fracturing, whereas levels (4) and (5) seal the caves and have little fracturing. Chert, calcite and gipsite veins cut across the carbonate units and play a major role in diagenesis. Our preliminary study indicate that hypogenic spelogenesis is the main process of karst development and contributed significantly to the generation of secondary porosity and permeability in the carbonate units.

Avaliação comparativa da eficácia dos meios de diagnóstico das vulvovaginites: implantação de tecnologia no ensino prático da ginecologia

Inaccurate diagnosis of vulvovaginitis generates inadequate treatments that cause damages women's health. Objective: evaluate the effectiveness of methods when diagnosing vulvovaginitis. Method: a cross-sectional study was performed with 200 women who complained about vaginal discharge. Vaginal smear was collected for microbiological tests, considering the gram stain method as gold standard. The efficacy of the available methods for diagnosis of vaginal discharge was assessed (sensitivity, specificity, positive predictive value and negative predictive value). Data were inserted to Graphpad Prism 6, for statistical analysis. Results: the following results were obtained: wet mount for vaginal candidiasis: sensitivity = 31%; specificity = 97%; positive predictive value (PPV) = 54%; negative predictive value (NPV) =93%; accuracy = 91%. Wet mount for bacterial vaginosis: sensitivity = 80%; specificity =95%; positive predictive value (PPV) = 80%; negative predictive value (NPV) = 95%; accuracy = 92%. Syndromic approach for bacterial vaginosis: sensitivity = 95%; specificity=43%; positive predictive value (PPV) =30%; negative predictive value (NPV) = 97%; accuracy = 54%. Syndromic approach for vaginal candidiasis: sensitivity = 75%; specificity =91%; positive predictive value (PPV) = 26%; negative predictive value (NPV) = 98%; accuracy = 90%. Pap smear for vaginal candidiasis: sensitivity = 68%, specificity = 98%; positive predictive value (PPV) = 86%; negative predictive value (NPV) =96%; accuracy = 96%. Pap smear for bacterial vaginosis: sensitivity = 75%; specificity = 100%; positive predictive value (PPV) = 100%; negative predictive value (NPV) =94%; accuracy = 95%. There was only one case of vaginal trichomoniasis reported – diagnosed by oncological cytology and wet mount – confirmed by Gram. The syndromic approach diagnosed it as bacterial vaginosis. From the data generated and with support on world literature, the Maternidade Escola Januário Cicco’s vulvovaginitis protocol was constructed. Conclusion: Pap smear and wet mount showed respectively low and very low sensitivity for vaginal candidiasis. Syndromic approach presented very low specificity and accuracy for bacterial vaginosis, which implies a large number of patients who are diagnosed or treated incorrectly.

Educação profissional e tecnológica de turismo no Brasil: análise através da percepção de docentes da rede federal de educação

The increasing pace of technological change and innovation in the labor market are important landmarks that contribute to accelerate the improvement of vocational and technological education. The need to analyze the educational processes is correlated with this dynamic in order to respond to the pedagogical processes and inherent to the labor market needs in evidence. This research theme is centered on targeted education process for tourist activity that is premised on improving the quality of services, taking as analysis parameter technological higher education in the federal education network (IF), covering the design, similarity and the differences in the courses offered, the axis of Tourism, Hospitality and Leisure instituted by the National catalog Technological Colleges and the National Science and Technology Department in Brazil. The research also aims to investigate the design and implementation of these upper and search courses emphasize the importance of training for students. The research is exploratory qualitative from survey data on the websites of the Ministry of Education, was adopted as a research procedure the questionnaire sent to coordinators via institutional email courses, to collect data in order to obtain results about Technological Education Federal Education Network. The survey results show that most courses offered by technological higher education in the federal education network (IF) is the Tourism Management, we noted that this option is the result of the ease in assembling the structure of the courses in relation to others; teachers have this type of education a more practical option for students coming to the conclusion that the courses undergo a fragile process, stating that the formation lies only in the student's interest in obtaining the higher diploma course without concern for quality this academic background, demand for courses is by being fast graduation. Even as a result of the design and development of Political and Pedagogical projects it was found that they are built in the most collegial many of them without the participation of a pedagogue; about the permanence of the student identified a high dropout rate, occurring in some campuses to migration to the traditional higher education, a BA in tourism. Thus, this work aimed to contextualize the technological higher education in tourism, presenting the reality of the current situation, aiming to discuss the phenomenon from the description made by all subjects and the research object, knowledge of which is due to experience the federal education network that was able to bring the essence of the matter.