60 resultados para Concebido


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of this work which is characterized as an applied research, with a qualitative exploratory approach and has case study character has been the analysis of the conceptions and dealings of health professionals of SAMU in Natal RN about the attendance of psychiatric urgencies. The information was collected between the months of March and April of 2010, by means of semi-structured interviews, performed with 24 health professionals integrating of SAMU-Natal as well as the usage of direct observation technique, performed in the institution's medical regulation room. Both the number of professionals involved in the interviews and the bringing about of the observations, were determined by saturation methods in qualitative research's information collecting. The interviews and observations were transcribed and submitted to contents analysis technique , more specifically, to thematic analysis, which made possible to reach the deepest levels, that go beyond what has simply been manifest in the speech of the interviewed, getting to the relations among the categories and social structures of the issue of the research. Keeping this in mind, three analysis categories have been built, namely: conceptions and concepts of psychiatric urgencies shared by health professionals in SAMU-Natal; attendances to psychiatric urgencies in SAMU-Natal; and the Brazilian Psychiatric Reformation under the view of the SAMU-Natal's health professionals. Reflection about the analyzed information revealed discussions pertaining to the stigma and prejudice on mental illness, and also, pointed out to some hindrances which impair the attendance to individuals in mental suffering in SAMU-Natal. The interviewed health professionals' conceptions on the individual in psychical crisis involve concepts of unpredictability, aggressiveness and risk, stigmatizing elements and historically associated to the social hazard ideology and need for mentally sicks' segregation. The predominance of these conceptions, seen in health professionals speech, had identifiable reflexes on assistance to psychiatric demands performed by SAMU-Natal, namely: indiscriminate request for military police's presence during psychic crisis intervention, neglect about occasions that involve mental health patients, as well as repetitive assisting practice directed on physical contention, and transportation to psychiatric hospital. Associated to it, the professionals have shown distorted and reductionist understanding about Brazilian Psychiatric Reformation, and, in the majority, haven't lent credibility to present model of attention to mental health, based on psycho-social treatment, pointing their speech to a need for psychiatric patient's internment. In this sense, we notice that the hospital-centered and excluding model conceived by classical psychiatry still remains alive in these health professionals' mentality as a reference to psychiatric urgency's assistance. Therefore, the research revealed a sequence of elements, that make us think about the challenges that health sector and society must face to realize Brazilian Psychiatric Reformation's principles and guidelines

Relevância:

10.00% 10.00%

Publicador:

Resumo:

In recent years, the Brazilian construction industry has gone by changes like currency stability, increasing competition, shortage of skilled labor and increasing quality importance required by the customer, who made the sector companies seek solutions through new management practices in order to become more efficient. A alternative to these management practices is known as Lean Construction which is derived from the Toyota System Production. Lean Construction main goals are to reduce parts of activities that do not add value, increase product value by considering customer needs, reduce variability and production cycle time, simplify process by reducing the number of parts or steps, increase the flexibility in the product execution and transparency process, focus the control on overall process, introduce continuous improvement process, maintain a balance between improvements in flows and conversions and seek to learn from practices adopted by competitors. However, the construction industry is characterized by having nomadic activity, which undertakes an unique product with high cost of production and big inertia for behavioral change, making it difficult to implement the philosophy of lean construction in companies. In this sense, the main objective of this study is to develop a methodology for implementation of the principles of Lean Construction. The method of implementing the proposed management system was designed with the aid of 5W2H tool, and the implementation process is divided into three phases. The first one aims to know in a macro way the current operation of construction, identify who is its target audience and what are the products and services offered to the Market. The second phase aims to describe what actions should be taken and which documents are needed to be created or modified; finally, the third step goal consists in how to control and monitor established processes, where through Strategic Planning the company goals would be set along with their respective targets and indicators in order to keep the system working, aiming for continuous improvement with focus on the customer. This methodology was conceived as a case study analyzing a medium size construction with more than 18 years of activity and certified for almost 10 years with ISO9001 and level A in PBQP-H. We also conclude that this implementation process can be used in any developer and / or builder

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The spread of the Web boosted the dissemination of Information Systems (IS) based on the Web. In order to support the implementation of these systems, several technologies came up or evolved with this purpose, namely the programming languages. The Technology Acceptance Model TAM (Davis, 1986) was conceived aiming to evaluate the acceptance/use of information technologies by their users. A lot of studies and many applications have used the TAM, however, in the literature it was not found a mention of the use of such model related to the use of programming languages. This study aims to investigate which factors influence the use of programming languages on the development of Web systems by their developers, applying an extension of the TAM, proposed in this work. To do so, a research was done with Web developers in two Yahoo groups: java-br and python-brasil, where 26 Java questionnaires and 39 Python questionnaires were fully answered. The questionnaire had general questions and questions which measured intrinsic and extrinsic factors of the programming languages, the perceived usefulness, the perceived ease of use, the attitude toward the using and the programming language use. Most of the respondents were men, graduate, between 20 and 30 years old, working in the southeast and south regions. The research was descriptive in the sense of its objectives. Statistical tools, descriptive statistics, main components and linear regression analysis were used for the data analysis. The foremost research results were: Java and Python have machine independence, extensibility, generality and reliability; Java and Python are more used by corporations and international organizations than supported by the government or educational institutions; there are more Java programmers than Python programmers; the perceived usefulness is influenced by the perceived ease of use; the generality and the extensibility are intrinsic factors of programming languages which influence the perceived ease of use; the perceived ease of use influences the attitude toward the using of the programming language

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Due to the current need of the industry to integrate data of the beginning of production originating from of several sources and of transforming them in useful information for sockets of decisions, a search exists every time larger for systems of visualization of information that come to collaborate with that functionality. On the other hand, a common practice nowadays, due to the high competitiveness of the market, it is the development of industrial systems that possess characteristics of modularity, distribution, flexibility, scalability, adaptation, interoperability, reusability and access through web. Those characteristics provide an extra agility and a larger easiness in adapting to the frequent changes of demand of the market. Based on the arguments exposed above, this work consists of specifying a component-based architecture, with the respective development of a system based on that architecture, for the visualization of industrial data. The system was conceived to be capable to supply on-line information and, optionally, historical information of variables originating from of the beginning of production. In this work it is shown that the component-based architecture developed possesses the necessary requirements for the obtaining of a system robust, reliable and of easy maintenance, being, like this, in agreement with the industrial needs. The use of that architecture allows although components can be added, removed or updated in time of execution, through a manager of components through web, still activating more the adaptation process and updating of the system

Relevância:

10.00% 10.00%

Publicador:

Resumo:

An alternative box-type solar oven constructed from the scrap iron of a gas conventional cook is presented, which functions principles are the effect greenhouse and the concentration. The oven of the conventional cook is the baking enclosure where the absorber (pot) of the solar oven is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven for the concentration of the radiation and a reflecting parabola was introduced in the baking enclosure for the exploitation of the incident reflected radiation in the interior of the oven. The oven is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove in study will be demonstrate The average internal temperature of the absorber was around 150°C and the internal temperature around 120°C. Will demonstrate that its low cost and good thermal performance represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Low cost seals are made of NBR, Nitrile Butadiene Rubber, a family of unsaturated copolymers that is higher resistant to oils the more content of nitrile have in its composition, although lower its flexibility. In Petroleum Engineering, NBR seal wear can cause fluid leakage and environmental damages, promoting an increasing demand for academic knowledge about polymeric materials candidate to seals submitted to sliding contacts to metal surfaces. This investigation aimed to evaluate tribological responses of a commercial NBR, hardness 73 ± 5 Sh A, polytetrafluoroethylene (PTFE), hardness 60 ± 4 HRE and PTFE with graphite, 68 ± 6 HRE. The testings were performed on a sliding tribometer conceived to explore the tribological performance of stationary polymer plane coupons submitted to rotational cylinder contact surface of steel AISI 52100, 20 ± 1 HRC Hardness, under dry and lubricated (oil SAE 15W40) conditions. After screening testings, the normal load, relative velocity and sliding distance were 3.15 N, 0.8 m/s and 3.2 km, respectively. The temperatures were collected over distances of 3.0±0.5 mm and 750±50 mm far from the contact to evaluate the heating in this referential zone due to contact sliding friction by two thermocouples K type. The polymers were characterized through Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The wear mechanisms of the polymer surfaces were analyzed by Scanning Electron Microscopy (SEM) and EDS (Energy-Dispersive X-ray Spectroscopy). NBR referred to the higher values of heating, suggesting higher sliding friction. PTFE and PTFE with graphite showed lower heating, attributed to the delamination mechanism

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Composite materials can be defined as materials formed from two or more constituents with different compositions, structures and properties, which are separated by an interface. The main objective in producing composites is to combine different materials to produce a single device with superior properties to the component unit. The present study used a composite consisting of plaster, cement, EPS, tire, PET and water to build prototype solar attempt to reduce the manufacturing cost of such equipment. It was built two box type solar cookers, a cooler to be cooled by solar energy, a solar dryer and a solar cooker concentration. For these prototypes were discussed the processes of construction and assembly, determination of thermal and mechanical properties, and raising the performance of such solar systems. Were also determined the proportions of the constituents of the composite materials according to specific performance of each prototype designed. This compound proved to be feasible for the manufacture of such equipment, low cost and easy manufacturing and assembly processes

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The improper disposal of nitrogen in receiving water courses causes problems such as toxicity to living beings through the consumption of oxygen to meet the nitrogen demand, eutrophication and nitrate contamination of aquifers. For this reason it is often necessary to be carried out complementary treatment of wastewater to eliminate or reduce the concentration of this compound in the wastewater. The objective of this study is to evaluate the biological removal of nitrogen compounds using submerged aerated and anoxic filters as post-treatment of an anaerobic system, with low cost and innovative technology, which in previous studies has shown high removal efficiency of organic matter and great potential biological nitrogen compounds removal. The simple design with perforated hoses for air distribution and filling with plastic parts proved to be very efficient in relation to organic matter removal and nitrification. The system presented, in the best stage, efficiency in converting ammonia to nitrate by 71%, and produced a final effluent concentration below 10 mg / L of NH3-N. In addition, carbon concentration was removed by 77%, producing final effluent with 24 mg/L COD. However, denitrification in anoxic filter was not effective even with the addition of an external carbon source. There was a reduction of up to 56% of nitrogen caused by the process of simultaneous nitrification and denitrification (SND). The high voids space presented by this type of support material coupled with direct aeration of the sludge, allows the respiration of biomass retained between the endogenous phase, increased cell retention time and sludge retention capacity, producing a final effluent with turbidity less than 5 UT and total suspended solids around 5.0 mg/L

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The semiarid potiguar presents a quite discrepant. It is a region with one of the highest rates of artificial lake the world, but the policy of building dams to mitigate the problem of water scarcity does not solve, given that they have not demonstrated the ability to ensure supply human priority during periods of great drought and fail to solve the widespread demand existent in the semiarid. This work aims to present the optimal allocation of water, according to multiple uses and limited availability of water resources in the reservoir, from the simulation of the operation of the same, with the application of techniques to support decision making and performance evaluation alternatives for water use. The reservoir of Santa Cruz, the second largest reservoir of RN with storage capacity of approximately 600 million cubic meters, located about 20 km from the town of Apodi in RN, was conceived as a way to promote economic development in the region as well as the water supply of nearby towns. The techniques used are the simulation model of network flow ACQUANET and also the set of performance indicators. The results showed that the container has the capacity to serve up to 3,83m3/s flow required by existing uses, without any compromising the same. However, it was also observed that all anticipated future demands are implemented it will generate failures in meeting some uses

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Esta disertación aborda la lectura e interpretación de las obras Grande Sertão: Veredas, de João Guimarães Rosa y Del Ingenioso Hidalgo Don Quijote de la Mancha, de Miguel de Cervantes Y Saavedra, enfocando aspectos relacionados a las acciones de los caballeros andantes Riobaldo, el jagunço de Rosa y don Quijote, el Caballero de Cervantes, las cuales tuvieron decisiva influencia en su estado de espíritu melancólico. En la base teórica de este trabajo, investigamos la noción de melancolía, sistematizada por Kristeva y Freud, así como los estudios de la melancolía y de la alegoría a la luz del pensamiento de Walter Benjamin. Este estudio se concentra, sobre todo, en el aspecto que denominamos de alegoría de la circularidad, que permea las dos novelas, mientras expresión de cosas inacabadas que sugiere la idea de movimientos de espiralamento. Se percibió que lo retorno es consagrado en ambas las obras, es decir diferente el igual, dicho que consagra la diferencia y cierra las puertas para la repetición literal de sentido. En tal comprensión, ese movimiento no puede ser concebido como metáfora del mismo, pues sugiere la travesía que permanece inacabada y tortuosa, su estatuto de repetición no se honda en el encuentro de las dos puntas del ovillo, porque gira en el interior de aquello que repite como diferencia y liberación

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The Lusiads is an epic poem, written by Luís de Camões, about the adventure of Vasco da Gama s trip and the history of Portugal. It's based on traditionals epics from the Greek and Roman poets, Homero and Virgílio. Camões followes especially their structures. However, the poet insert modifications that divert his poem from parameters established by Aristóteles for the classic epic poems. These deviations are centered mainly on the narrative subject and in the point of view. We intend to show an analysis focused on digressions from The Lusiads, in which the author, himself or by tellers characters, narrates the story in order to make his complaints, reflections and exhortations. Besides, we present general aspects of Maneirismo predominant in these digressions how evidences of modernity of the poem; as one brief outlook about the poem's projection in time and around the world. These points are importants elements of consolidation of a universal permanence of The Lusiads. That's why they have had to read and to study by the centuries, according the vision of the epoch's spirit

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The present dissertation analyses the philosophy of Friedrich Nietzsche (1844-1900) and the short story written by João Guimarães Rosa (1908-1967), A hora e vez de Augusto Matraga (1946) seeking to point out the possibility of the philosophic application of some Nietzschean ideas to enlarge the aesthetic value of the short story. It has been especially aimed at applying the concept of the noble superior being described by Nietzsche, the ubermensch, to the hero s ontological nature, Augusto Matraga. Nietzsche s postulates of the will to power, the elements suggested of the trial between Dionysus and Apollo and the ascetic ideal, will be especially relevant to this work, which intends to establish until what point the hero can be conceived as a good ascetic person, in so far as his noble ontological nature trespass the Christian morality, bringing him closer to the man who, according to Nietzsche, is beyond good and evil. Some Heideggerian concepts will also be relevant in order to reinforce the idea that the judgment created about Matraga is just an appearance that does not contemplate his essential Being, contributing to veil his real tragic-ontological valour, what implies that the aesthetic power of the short has been under valued

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Nursing documentation is a literacy practice which is regulated by law. Among the written practices of the literacy field, nursing registration is understood as the attendance resume of the main problems and occurrences on duty. In other words it is a document and a communication instrument used by hospital orderly on duty. It s main goal is to keep a record of the information which is necessary to the continuity of the activities as well as to the assistance to the patients. Taking into consideration the complexity of this kind of literacy practice, this study which took place in a hospital context, aims at studying the nursing registration process in order to explain its implementation in the nursing field. The discussion is situated in the area of applied linguistics, and it makes a linkage between linguistics approaches and language questions which are related to the area of discourse at work. The theoretical foundations come from contemporary literacy studies such as Hamilton (2000) who proposes the following categories: participants, domain, artifacts and activities. The analysis was guided by the principles of the ethnographic methodology which proposes that the researcher spends much time in the field and uses a set of techniques in order to collect data related to the subjects speech as well as their deeds concerning the research main object. The data were collected through field observations, analysis of 100 nursing records, 04 reflective sessions and interviews as well involving 36 nurses. On one hand, the analysis reveals the importance of the nursing records in terms of documentation and communication. On the other hand, it shows informational, compositional as well as normative difficulties in terms of linguistics and legal aspects. For, we conclude that these questions need to be addressed through the process of intervention especially in events of teacher in service activities so that the professional nurses may improve their practice in relation to the elaboration of the nursing documentation on duty

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This study aims to analyze the communication graphics of layouts of hypermedia interfaces oriented to Distance Education via the Internet. This proposal is justified by widening the offer of courses that modality and the consequent application of items of hypermedia for teaching-learning. The method of analysis involved the search nethnographic, addressed to the cycle student intermediary of the Training Program Continuing Medias in Education, and the evaluation heuristic of the interfaces of Virtual Learning Environment "E-Proinfo" and of the modules of the Cycle. This evaluation we observed the implementation of the attributes of usability and the degree of interactivity of each interface. The results revealed an inefficient implementation of the attributes of usability, which meant a consequent reduction of the levels of interactivity. As proposing the present Design Virtual Learning, a model of hypermedia layout, designed to generate usability for Virtual learning environments and extend the acquisition of literancy for students and tutors. This proposal design not hypermedia aims the demarcation of models pre-conceived, but the proposal of layout in which each element of hypermedia is applied with a view to generate a seaworthiness intuitive, more agile and efficient, in these ambients