Estudo e caracterização de matérias-primas para o desenvolvimento de blocos sílico-calcários

The types of products manufactured calcium silicate blocks are very diversified in its characteristics. They include accessory bricks, blocks, products in dense material, with or without reinforcements of hardware, great units in cellular material, and thermal insulating products. The elements calcium silicate are of great use in the prefabricated construction, being formed for dense masses and hardened by autoclaving. This work has for objective develop formulations that make possible the obtaining of calcium silicate blocks with characteristics that correspond the specifications technical, in the State of the Rio Grande of the North, in finality of obtaining technical viability for use in the civil construction. The work studied the availability raw materials from convenient for the production of calcium silicate blocks, and the effect of variations of the productive process on the developed products. The studied raw materials were: the quartz sand from the city of São Gonçalo do Amarante/RN, and two lime, a hydrated lime and a pure lime from the city of Governador Dix-Sept Rosado/RN. The raw materials collected were submitted a testes to particle size distribution, fluorescence of X rays, diffraction of X rays. Then were produced 8 formulations and made body-of-test by uniaxial pressing at 36 MPa, and cured for 7 hours at about 18 kgf/cm2 pressing and temperature of approximately 180 °C. The cure technological properties evaluated were: lineal shrinkage, apparent density, apparent porosity, water absorption, modulus of rupture flexural (3 points), resistance compression, phase analysis (XRD) and micromorphological analysis (SEM). From the results presented the technological properties, was possible say that utilization of hydrated lime becomes more viable its utilization in mass limestone silica, for manufacture of calcium silicate blocks

Estudo térmico e de materiais na construção de casas populares com blocos confeccionados a partir de um composto a base de cimento, gesso, eps e raspa de pneu

We built an experimental house on an UFRN´s land using blocks made by a composite consisting of cement, plaster, EPS, crushed rubber and sand. Several blocks were made from various compositions and we made preliminary tests of mechanical and thermal resistance, choosing the most appropriate proportion. PET bottles were used inside the block to provide thermal resistance. In this work, a second function was given to the bottles: to serve as a docking between the blocks, because the ends of the cylinders came out of each block on top as well as at the bottom, with the bottom cut, allowing to fit of the extremities of the upper cylinder of a block in the lower holes of the other one, which were formed by the cutting already mentioned. Minimum compression tests were performed according to ABNT standards for walls closing blocks (fence). With that house built, we did studies of thermal performance in order to ascertain conditions of comfort, checking external and internal temperatures in the walls and in the ambient, among other variables, such as wind speed and relative humidity. The resulting blocks provided adequate thermal insulation to the environment, where the walls presented differences up to 11.7 ºC between the outer and inner faces, getting the maximum temperature inside the house around 31 °C, within the so-called thermal comfort zone for warm climates. At the end of the experiments it was evident the effectiveness of that construction in order to provide thermal comfort in the internal environment of the house, as well as we could confirm the viability of building houses from recyclable materials, reducing the constructive costs, becoming a suitable alternative for low- incoming families. Moreover, besides the low cost, the proposal represents an alternative use of various recyclable materials, therefore considered an ecological solution

Compósito para fabricação de blocos para construção de casas: estudos térmico e de materiais

We present two models of blocks made of composite material obtained from the use of cement, plaster, EPS crushed, shredded tire, mud, sand and water, for the construction of popular housing. Were made metal molds for the manufacture of blocks to be used in the construction of a residence for low-income families. Performed tests of compressive strength of the composite for various formulations that met the specific standard for blocks used in construction. To study the thermal conductivity of the composite for further study of thermal comfort generated in a residence built with the proposed composite. We also determined the mass-specific and water absorption for each formulation studied. Using a home already built with another composite material, made up the closing of a window with the building blocks and found the thermal insulation, measuring external and internal temperatures of the blocks. The blocks had made good thermal insulation of the environment, resulting in differences of up to 12.6°C between the outer and inner faces. It will be shown the feasibility of using composite for the end proposed and chosen the most appropriate wording

Comparação das respostas fisiológicas entre diferentes testes funcionais em obesos

obesity affects rightly functional capacity diminishing the cardiovascular system efficiency and oxygen uptake (VO2). Field tests, such as, Incremental Shuttle Walking Test (ISWT) and Six Minute Walk Test (6MWT) has been employed as alternative of Cardiopulmonary Exercise Test (CPX), to functional assessing for conditions which transport of oxygen to peripheral is diminished. Nevertheless, the knowing about metabolic variables response in real time and it comparing among different maximal and submaximal tests in obese is absent. Aim: to compare cardiopulmonary, metabolic response during CPX, ISWT and 6MWT and to analyse it influence of adiposity markers in obese. Material e Method: crosssectional, prospective study. Obese included if: (BMI>30Kg/m2; FVC>80%), were assessed as clinical, anthropometric (BMI, body adiposity index-BAI, waist-WC, hip- HC and neck-NC circumferences) and spirometry (forced vital capacity-FVC, Forced expiratory volume-1°second-FEV1, maximal voluntary ventilation-MVV) variables. Obese performed the sequence of tests: CPX, ISWT and 6MWT. Throughout tests was assessed breath-by-breath by telemetry system (Cortex-Biophysik-Metamax3B) variables; oxygen uptake on peak of activity (VO2peak); carbon dioxide production (VCO2); Volume Expiratory (VE); ventilatory equivalents for VO2 (VE/VO2) and CO2 (VE/VCO2); respiratory exchange rate (RER) and perceived effort-Borg6-20). Results: 15 obese (10women) 39.4+10.1years, normal spirometry (%CVF=93.7+9.7) finished all test. They have BMI (43.5+6.6kg/m2) and different as %adiposity (BAI=50.0+10.5% and 48.8+16.9% respectively women and men). Difference of VO2ml/kg/min and %VO2 were finding between CPX (18.6+4.0) and 6MWT (13.2+2.5) but not between ISWT (15.4+2.9). Agreement was found for ISWT and CPX on VO2Peak (3.2ml/kg/min; 95%; IC-3.0 9.4) and %VO2 (16.4%). VCO2(l/min) confirms similarity in production for CPX (2.3+1.0) and ISWT (1.7+0.7) and difference for 6MWT (1.4+0.6). WC explains more the response of CPX and ISWT than other adiposity markers. Adiposity diminishes 3.2% duration of CPX. Conclusion: ISWT promotes similar metabolic and cardiovascular response than CPX in obese. It suggesting that ISWT could be useful and reliable to assess oxygen uptake and functional capacity in obese

Associação entre polimorfismos funcionais nos genes da MMP-7 e MMP-9 e o perfil clinicopatológico do carcinoma epidermóide de língua

Matrix metalloproteinase-7 (MMP-7) and -9 (MMP-9) modulate important functions strictly related to the development, invasion and metastasis of several human cancers among them the squamous cell carcinoma of the tongue (SCCT). However, individual genetic factors such as the functional single nucleotide polymorphisms (SNPs) influence the pattern of protein expression of these MMPs and thus may be related to the variability observed in the clinical behavior of patients with SCCT. In this context, the present cross-sectional study aimed to evaluate the association between the frequency of the functional SNPs MMP-7 -181 A/G and MMP-9 -1562 C/T and the clinical (age, gender and metastasis) and pathological (malignancy histological grading and immunohistochemistry expression) features of SCCT cases. Genotyping of these SNPs were performed by PCR-RFLP on DNA samples from 71 cases of SCCT and 60 individuals without cancer who constitute the control group. Among the results of this research, it was observed that the frequency of the polymorphic alleles MMP-7 -181 G and MMP-9 -1562 T in SCCT patients was 28% and 12%, respectively, and the frequency of the heterozygotes A/G (PR = 2.00; p < 0.001) and C/T (PR = 1.54; p = 0.014) were significantly higher in the patient group than in the controls. The prevalence of patients carrying the combination of SNPs studied was significantly associated with SCCT cases (PR = 2.00; p = 0.011) and metastasis (PR = 2.00; p < 0.001). Furthermore, with the frequency of SNPs analyzed, the age, gender, histological grading and immunoreactivity of MMP-7 and MMP-9 formed clinical and pathological parameters relevant to the identification of population subgroups more related to the development of SCCT and metastasis. Based on these results, it is suggested that the protein expression levels of MMP-7 and -9 substantially influence the balance between their pro- and anticancer biological functions and hence the clinicopathological profile of the squamous cell carcinoma of the tongue

Diferenças funcionais das regiões hipocampais na formação da memória do tipo o quê", "quando" e "onde" em ratos

Episodic memory refers to the recollection of what, where and when a specific event occurred. Hippocampus is a key structure in this type of memory. Computational models suggest that the dentate gyrus (DG) and the CA3 hippocampal subregions are involved in pattern separation and the rapid acquisition of episodic memories, while CA1 is involved in memory consolidation. However there are few studies with animal models that access simultaneously the aspects ‗what-where-when . Recently, an object recognition episodic-like memory task in rodents was proposed. This task consists of two sample trials and a test phase. In sample trial one, the rat is exposed to four copies of an object. In sample trial two, one hour later, the rat is exposed to four copies of a different object. In the test phase, 1 h later, two copies of each of the objects previously used are presented. One copy of the object used in sample trial one is located in a different place, and therefore it is expected to be the most explored object.However, the short retention delay of the task narrows its applications. This study verifies if this task can be evoked after 24h and whether the pharmacological inactivation of the DG/CA3 and CA1 subregions could differentially impair the acquisition of the task described. Validation of the task with a longer interval (24h) was accomplished (animals showed spatiotemporal object discrimination and scopolamine (1 mg/kg, ip) injected pos-training impaired performance). Afterwards, the GABA agonist muscimol, (0,250 μg/μl; volume = 0,5 μl) or saline were injected in the hippocampal subregions fifteen minutes before training. Pre-training inactivation of the DG/CA3 subregions impaired the spatial discrimination of the objects (‗where ), while the temporal discrimination (‗when ) was preserved. Rats treated with muscimol in the CA1 subregion explored all the objects equally well, irrespective of place or presentation time. Our results corroborate the computational models that postulate a role for DG/CA3 in spatial pattern separation, and a role for CA1 in the consolidation process of different mnemonic episodes

Reconhecimento de seqüências de atividades funcionais em pacientes com acidente cascular encefálico

During the motor rehabilitation of patients with neurological pathologies, there are many factors that have an influence on the therapeutical process. It is possible that the demonstration using videotapes or photographs of movements that will be learned can assist the codification, classification and reorganization of the elements of the task in familiar diagrams and thus facilitate the process of motor rehabilitation. The aim of this study was to analyze the performance in the test of recognition of sequences of functional activities such as water drinking and hair combing presented partially (by photos) and completely (by video) to the patients with encephalic vascular accident . The sample was generated from 12 patients (62 ± 8 years) and 10 healthy subjects (53 ± 5 years), of both sex, divided in two groups for which 5 functional activities were presented partially and completely, in 4 sequences that varied between reached and not reached objectives and correct and incorrect movements, during 24 trials. The test t'Student was applied to verify differences in the recognition time between the groups, and to compare the performance between the tests carried through at 9:00 am and retests at 9:00 am and 4:00 pm. To compare the frequency between the types of reply, the test Qui-square was used. It was verified that the patients presented a greater recognition time and a lower number of correct answers than the healthy subjects, and had better performances in the recognition of the complete sequence than the partial one. Bigger frequency was observed in the reply that the objective and the movement were being presented correctly, however the healthy subjects had soon indicated the correct reply in the first trials. An improvement tendency was observed in the performance, when the stages of tests and retests had been carried through in the same schedule. According to the results, it is suggested that the patients with stroke can better recognize the correct movements of a functional activity when it is presented completely in video form, what can influence the choice of the therapeutical strategy during the process of motor rehabilitation

Reconhecimento de seqüências de atividades funcionais em pacientes com acidente cascular encefálico

During the motor rehabilitation of patients with neurological pathologies, there are many factors that have an influence on the therapeutical process. It is possible that the demonstration using videotapes or photographs of movements that will be learned can assist the codification, classification and reorganization of the elements of the task in familiar diagrams and thus facilitate the process of motor rehabilitation. The aim of this study was to analyze the performance in the test of recognition of sequences of functional activities such as water drinking and hair combing presented partially (by photos) and completely (by video) to the patients with encephalic vascular accident . The sample was generated from 12 patients (62 ± 8 years) and 10 healthy subjects (53 ± 5 years), of both sex, divided in two groups for which 5 functional activities were presented partially and completely, in 4 sequences that varied between reached and not reached objectives and correct and incorrect movements, during 24 trials. The test t'Student was applied to verify differences in the recognition time between the groups, and to compare the performance between the tests carried through at 9:00 am and retests at 9:00 am and 4:00 pm. To compare the frequency between the types of reply, the test Qui-square was used. It was verified that the patients presented a greater recognition time and a lower number of correct answers than the healthy subjects, and had better performances in the recognition of the complete sequence than the partial one. Bigger frequency was observed in the reply that the objective and the movement were being presented correctly, however the healthy subjects had soon indicated the correct reply in the first trials. An improvement tendency was observed in the performance, when the stages of tests and retests had been carried through in the same schedule. According to the results, it is suggested that the patients with stroke can better recognize the correct movements of a functional activity when it is presented completely in video form, what can influence the choice of the therapeutical strategy during the process of motor rehabilitation

STREAM-AP: um processo para sistematizar a escolha de padrões arquiteturais baseado em requisitos não-funcionais

The importance of non-functional requirements for computer systems is increasing. Satisfying these requirements requires special attention to the software architecture, since an unsuitable architecture introduces greater complexity in addition to the intrinsic complexity of the system. Some studies have shown that, despite requirements engineering and software architecture activities act on different aspects of development, they must be performed iteratively and intertwined to produce satisfactory software systems. The STREAM process presents a systematic approach to reduce the gap between requirements and architecture development, emphasizing the functional requirements, but using the non-functional requirements in an ad hoc way. However, non-functional requirements typically influence the system as a whole. Thus, the STREAM uses Architectural Patterns to refine the software architecture. These patterns are chosen by using non-functional requirements in an ad hoc way. This master thesis presents a process to improve STREAM in making the choice of architectural patterns systematic by using non-functional requirements, in order to guide the refinement of a software architecture

Efeito da seca na dinâmica dos grupos funcionais fitoplanctônicos em reservatórios eutróficos do semiárido

Reservoirs are the main sources of surface water in Brazil´s semiarid region. The majority of these water supplies, however, are compromised by eutrophication. A severe drought in 2012 contributed to significant losses in water volume, influencing the availability of resources (nutrients and light) for phytoplankton. The aim of this study is to understand the dynamics of the functional groups of phytoplankton and the factors that affect them during a severe drought in the semiarid reservoirs of the northeast. We therefore studied the Dourado, Gargalheiras and Passagem das Traíras reservoirs in Rio Grande do Norte from January 2012 to January 2013. The effect of drought favoured homogeneity within the reservoir, in relation to biotic and abiotic variables, notably the absence of water supply given the lack of flow from its tributaries (intermittent river). The phytoplankton functional groups of bloomforming cyanobacteria (SN, S1 and M) dominated throughout the year 2012, in both the shallow and deep areas of the three reservoirs studied. The groups were related to high concentrations of volatile solids, total phosphorus and ammonia, and high turbidity. Cylindrospermopsis raciborskii (SN group) was the species with the greatest biomass in the three reservoirs. M group (Sphaerocavum brasiliense) performed better in shallow waters with more available phosphorus. Our data showed that high concentrations of nutrients and low availability of light, besides the stability of the water column due to lack of flow and the system´s high residence time, favoured the dominance of bloom-forming cyanobacteria groups, especially those tolerant to shadow

Viabilidade técnica da fabricação de compósito utilizando fibra de pneu na fabricação de blocos intertravados

This work aims to demonstrate the feasibility of a ceramic composite containing fiber in the rubber manufacturing interlocking blocks. Gravel, sand, cement, rubber and fiber: the processes of manufacture and assembly of blocks produced and the various formulations studied with different proportions between the constituent elements were addressed. Mechanical properties were determined for the different formulations, compressive strength, diametral compressive strength, water absorption and apparent density, obeying the rules related to each property. It was concluded that the addition of rubber fiber gave the concrete studied resistance lower than conventional concrete which can be verified on the microstructural analysis obtained by SEM, which revealed the presence of pores and the low adhesion between the fiber and the matrix compression (tire fiber / cement paste). The composite of more viable tire BCPB1 (1/2) fiber can be used in places requests as light squares, pavements, roads and other cycle as well as in the manufacture of the curb and gutter, by having compressive strength in about 20 MPa

Caracterização mecânica, térmica e acústica de um compósito que utiliza rejeitos de mármore, granito e EPS para a fabricação de blocos para a construção civil

The use of composite materials for the construction industry has been the subject of numerous scientific papers in Brazil and in the world. One of the factors that motivate this quest is the housing deficit that countries especially the third world face. In Brazil this deficit reaches more than 6.5 million homes, around 12% of all US households . This paper presents a composite that was obtained from waste generated in processes for the production of granite and marble slabs, cement, gypsum, sand, crushed EPS and water. These wastes cause great damage to the environment and are thrown into landfi lls in bulk. The novelty of the work is in the combined study thermal, mechanical and acoustic composite obtained in real situation of rooms that are part of an experimental housing. Many blocks were made from cement compositions, plaster, foam, sand, marb le and / or granite, preliminary tests of mechanical and thermal resistance were made by choosing the most appropriate proportion. Will be given the manufacturing processes and assembly units 500 units 10 x 80 x 28 cm produced for the construction of an ex perimental home. We studied what kind of block and residue, marble or granite, made it more feasible for the intended purpose. The mechanical strength of the produced blocks were above 3.0 MPa. The thermal resistance of the blocks was confirmed by the maxi mum temperature difference between the inner and outer walls of rooms built around 8.0 ° C. The sound absorption for optimal room was around 31%. Demonstrated the feasibility of using the blocks manufactured with composite material proposed for construction.

Avaliação da conformidade dos blocos cerâmicos produzidos em algumas cerâmicas no Rio Grande do Norte

The final quality of the works accomplished by the building construction industry depends directly on the quality of the materials supplied and used during all their phases of execution. The federal government participation and several state programs have established conditions to stimulate and require the increment of the quality level in the building construction industry´s product chain. These programs aim at the product conformity to the technical standards. Within this context, the evaluation program of the ceramic product conformity in Rio Grande do Norte state is assessing the conformity degree to Brazilian Technical Standards of ceramic bricks and tiles made in the ceramic production area in the state. In this work, is determine the degree of conformity of the sealing ceramic bricks made by some companies in different areas of the state, such as Assú, São Gonçalo do Amarante, Apodi, Parelhas, São José do Mipibu e Macaíba. Using the technical standards as a point of reference, we attempted to reproduce in the laboratory the experimental procedures to the analysis execution, according to the specifications. It was possible to determine that none of the evaluated samples are in strict conformity with the current technical standards, what reflects the real situation of the products available on the market.

Avaliação de polimorfismos funcionais nos genes de reparo XRCC1, APEX1, XPD e XPF em carcinomas de células escamosas orais

Base excision repair (BER) and nucleotide excision repair (NER) pathways play critical role in maintaining genome integrity. Polymorphisms in BER and NER genes which modulate the DNA repair capacity may affect the susceptibility and prognosis of oral cancer. This study was conducted with genomic DNA from 92 patients with oral squamous cell carcinomas (OSCC) and 130 controls. The cases were followed up to explore the associations between BER and NER genes polymorphisms and the risk and prognosis of OSCC. Four single-nucleotide polymorphisms (SNPs) in XRCC1 (rs25487), APEX1 (rs1130409), XPD (rs13181) and XPF (rs1799797) genes were tested by polymerase chain reaction – quantitative real time method. The GraphPad Prism version 6.0.1 statistical software was applied for statistical analysis of association. Odds ratio (OR), hazard ratio (HR), and their 95 % confidence intervals (CIs) were calculated by logistic regression. Kaplan-Meier curve and Cox proportional hazard model were used for prognostic analysis. The presence of polymorphic variants in XRCC1, APEX1, XPD and XPF genes were not associated with an increased risk of OSCC. Gene-environment interactions with smoking were not significant for any polymorphism. The presence of polymorphic variants of the XPD gene in association with alcohol consumption conferred an increased risk of 1.86 (95% CI: 0.86 – 4.01, p=0.03) for OSCC. Only APEX1 was associated with decreased specific survival (HR 3.94, 95% CI: 1.31 – 11.88, p=0.01). These results suggest an interaction between polymorphic variants of the XPF gene and alcohol consumption. Additionally APEX1 may represent a prognostic marker for OSCC.

Características bioativas, funcionais e efeito protetor do resíduo desidratado de camu-camu (Myrciaria dubia H.B.K. (McVaugh)) sobre doenças degenerativas utilizando modelos in vivo C. elegans

Camu-camu (Myrciaria dubia H.B.K. (McVaugh)) is a native Amazon fruit, recognized worldwide as one of the main natural sources of ascorbic acid. Due to its great acidity, this fruit is generally consumed after processing into juice or as ingredient in food preparations. As a co-product of the camu-camu processing, a significant amount of agroindustrial residue is generated. Despite the studies showing the bioactive value and biological potential of the fruit, few studies have approached the possible processing techniques, transformation and preservation of camu-camu fruits and its agroindustrial pomace. Therefore, the present work has the objective of evaluating two different drying processes applied to camu-camu pomace (peel and seeds with residual pulp), freeze drying and hot air drying, in order to obtain a functional fruit product. This thesis was divided into three stages: the first one shows the studies related to the freeze drying and hot air drying, where we demonstrated the impact of the selected drying techniques on the bioactive components of camu-camu, taking the fresh pomace as the control group. Among the investigated conditions, the groups obtained at 50ºC and 4 m/s (SC50) and 80ºC and 6 m/s (SC80) were selected as for further studies, based on their ascorbic acid final content and Folin-Ciocalteau reducing capacity. In addition to SC50 and SC80, the fresh pomace (RF) and freeze dried (RL) samples were also evaluated in these further stages of the research. Overall, the results show higher bioactive concentration in the RF samples, followed by RL, SC50 and SC80. On the second step of the research, the antioxidant, antimicrobial and antienzymatic activities were evaluated and the same tendency was observed. It was also reported, for the first time in the literature, the presence of syringic acid in dried camu-camu pomace. In the third and final stage of the research, it was investigated the effect of dried camu-camu on aging and neuroprotective disorders, using the in vivo model C.elegans. It was observed that camu-camu extracts were able to modulate important signaling genes relevant to thermal and oxidative stresses (p < 0.05). The polar acid, polar basic and polar neutral fractions obtained from the low molecular extracts of SC50 were able to extend the lifespan of wild type N2 C. elegans in 20% and 13% (p < 0.001). Results also showed that the paralysis induced by the β1-42 amyloid was significantly (p < 0.0001) retarded in CL4176 worms. Similarly, the camu-camu extracts attenuated the dopaminergic induction associated to Parkinson’s disease. Finally, a global analysis of the data presented here reveal that the camu-camu pomace, a co-product obtained from the industrial processing of a native Brazilian fruit, is a relevant natural source of health relevant compounds. This thesis, shows for the first time, the multifunctionality of camu-camu pomace, a natural resource still underexploited for scientific, commercial and technological purposes.