51 resultados para Avaliação técnico-econômica
Resumo:
Broadly anchored on Institutionalist literature this dissertation seeks to answer: Why rural credit granted to farming families in Rio Grande do Norte, Pronaf group B, has shown positive results in some territories while in others the same results are insatisfactory? Considering formal rules are the same, then why such results are so distinguished? This research supports the fact that these results are a direct consequence of the quality of institutions defined as longstanding social rules established and built in social interactions. For institutions one understands; organizational structures, formal and non-formal rules, social trust, thinking behaviors and its evolution as well as routines. Using Pronaf Rural Credit as a background this study measures and compares results obtained in the rural areas of Seridó, Sertão do Apodi, Mato Grande, Assú-Mossoró, Trairi, Potengi and Alto Oeste. The dimensions of measurement considered were: economics, social and guarantee of transparency. The study considers a sample of 402 Group B farming families. It also elaborates a socio-economic profile of these families in the considered areas and underlines the main causes for defaulted loans, difficulties to improve family income and results of access to Pronaf B credit line, as well as it proposes solutions to surpass obstacles to improve the efficiency of this credit line
Resumo:
In contemporary society, distance education is expanding, especially in the offering of courses of initiatory professor training. By the side of possibilities, there is the need to critically reflect on the government decision to finance, and even to incite distance education, as a more economic way to achieve, within different time and space, the greatest quantity of the population, trying to fill the gaps of the Brazilian school education. The research was made in the Biology Bachelor Course offered by the Pernambuco University (UPE), in the context of the Presential Support Pole of the Paraiba State University, located in the city of Campina Grande. Along this study, we intend to analyze the evaluation practice and the instruments of valuation available in the virtual environment of learning (AVA), used by the former professors in the learning evaluation of the contents offered by the reference course. The relevance of the discussion is to reflect about the results of distance education in the initial of the professor training. To perceive the possibilities and limitations concerning the technological resources available at the educational process, especially to the evaluation practice, is primordial in order to comprehend the contents of learning that can be explored by the professors and which is the dialogical relation that is firmed between professor, preceptor and student, in favor of the learning development and an effective and meaningful education. The qualitative research had the symbolic interacionism as a methodological-theoretical approach. We gathered informations through institutional documents, documental records, questionnaires and semi-structured interviews. Treating and analyzing the data we used the content analysis method (Bardin, 1977). As a theoretical basis, we relied on authors such as Zabala (1998, 1999), Aretio (2002), Hoffmann (2003, 2005), Silva, M. (2003, 2006), Belloni (2006), Luckesi (2008), Silva, J. (2008), Vasconcelos (2008) and Domingos (2009). It was evident the need to reflect about the educational practice of the professors and preceptors responsible for the academic distance learning, concerning the evaluation of the learning contents in a autonomous and innovatory way, identifying its influence in the development of values which are considered vital to a complete professor upbringing. The evaluation in a mediator approach is necessary to the reality of an online classroom, because of its character to promote the improvement of the action of the one who is teaching and the one Who is learning in an interactive, collaborative and cooperative perspective, seeking a transformative praxis. Involved in this formation, the bachelors will be able to promote the development of capacities and skills necessary to the complete learning of theirs future students, certifying the education for life, which is a perspective that includes the knowing, the knowing how to do and how to be, a living being with sustainable relations with the others and with nature
Resumo:
O objetivo desse trabalho foi investigar a contribuição social da atividade econômica denominada de carcinicultura, para o município de Canguaretama no Rio Grande do Norte, a partir da visão dos moradores do citado município, sendo enfocados aspectos ambientais, aspectos de produção, consumo de energia, geração de empregos e renda, e investimentos na área social, para a melhoria de vida da população local. Foi realizada uma pesquisa amostral do tipo Survey com 234 pessoas daquele município de um universo de 27.011 habitantes. Foi escolhido esse município porque o mesmo é um dos principais produtores de camarões no Estado, além de contar com as principais fazendas de criação e laboratórios de melhoramento genético dessa cultura. O instrumento de pesquisa utilizado, foi o questionário com perguntas abertas e fechadas. Resultados mostram que grande maioria declarou pouco conhecimento com relação ao processo produtivo da atividade da carcinicultura e reconheceram como principal benefício da mesma, a geração de empregos. Em termos de associação entre variáveis, não se verificou relacionamento entre as variáveis investigadas do grupo perfil e a variável dependente que expressa a opinião do entrevistado quanto aos benefícios sociais gerados pela atividade. Ou seja, em termos de gênero, não há diferença de percepção entre homens e mulheres sobre os benefícios sociais advindos da carcinicultura. De forma análoga, não se observa diferença de percepção sobre os benefícios sociais da atividade entre as diferentes faixas de escolaridade, idade e renda familiar da população entrevistada
Resumo:
Knowledge and innovation were seen as major forces, both for survival, as the acquisition of competitive advantages in the Brazilian economy, as well as adding value to the product as a market differentiator. The Triple Helix model is directed toward the knowledge-based economy. Over the past six years, the Federal Government through the Financier of Studies and Projects ( FINEP ) invested in technological innovation projects, economic subsidies, about U.S. $ 1 billion supporting more than 800 projects with these resources. According to the MCTI , the Northeast, over the years 2000 to 2010 increased spending on Science and Technology (considering the activities of research and development more scientific and related activities) of the State Government in relation to its total revenue In 2000, 0.51% of total revenues were invested in Science & Technology, while in 2010 this figure increased to 1.31%. Among the nine Northeast states, Paraíba is highlighted. In 2000, 0.33% of its total revenues were directed to innovation, reaching 2.04% in 2010, the largest increase in the region while the RN invested 0.24% in 2000 and in 2010 reached the level of 1.42 %. According to IBGE, in the period 2000-2011, the micro and small enterprises surpassed the barrier of 6 million establishments. In 2000, there were 4.2 million establishments while in 2011 were 6.3 million active establishments. Therefore, throughout the period, there was a creation of approximately 2.1 million new establishments. Between 2000 and 2011, micro and small businesses have created 7.0 million formal jobs, 8.6 million jobs in 2000 to 15.6 million in 2011. This scenario shows the importance of this study in relation to the investment of governments in RD & I in micro and small enterprises. This study aims to analyze the interaction Universities - Business - Government in the development of innovation in micro and small companies in Rio Grande do Norte participants of the edicts of Inova FAPERN. We chose to adopt as a research method case study concerning the procedure of the research, exploratory, descriptive, and on documents with engineers and researchers of innovation projects approved by PAPPE Subsidy (Inova -RN I, II and III). Data collection was done through the report made by FAPERN entitled: " Evaluation of companies financed and supported by the Grant Program for Technological Innovation for Micro and Small Enterprises RN - INOVA -RN " (2010) and a questionnaire with 40 closed questions and 1 opened to 30 affirmative composed based on a 5-point Likert scale. The analysis of data was qualitative and quantitative. The study provided to identify the importance and barriers arising from the relation between Government Enterprise (micro and small) and University as essential to the economic development of the region. It was also identified that, in the innovation projects, 70% of the goods or services originating from research were to market these, 50% resulted in a patent for the company and 80% publications of scientific articles
Resumo:
Materials known as technical textiles can be defined as structures designed and developed to meet specific functional requirements of various industry sectors, which is the case in automotive and aerospace industries, and other specific applications. Therefore, the purpose of this work presents the development and manufacture of polymer composite with isophthalic polyester resin. The reinforcement of the composite structure is a technical textile fabric made from high performance fibers, aramid (Kevlar 49) and glass fiber E. The fabrics are manufactured by the same method, with the aim of improving the tensile strength of the resulting polymer composite material. The fabrics, we developed some low grammage technical textile structures in laboratory scale and differentiated-composition type aramid (100%), hybrid 1 aramid fiber / glass (65/35%) and hybrid 2 aramid fiber / glass (85/15% ) for use as a reinforcing element in composite materials with unsaturated isophthalic polyester matrix. The polymer composites produced were tested in uniaxial tensile fracture surface and it´s evaluated by SEM. The purpose of this work characterize the performance of polymer composites prepared, identifying changes and based on resistance to strain corresponding to the mechanical behavior. The objectives are to verify the capability of using this reinforcement structure, along with the use of high performance fibers and resin in terms of workability and mechanical strength; verify the adherence of the fiber to the matrix and the fracture surface by electron microscopy scanning and determination of tensile strength by tensile test. The results indicate that, in a comparative study to the response of uniaxial tensile test for tensile strength of the composites and the efficiency of the low percentage of reinforcement element, being a technical textile fabric structure that features characteristic of lightness and low weight added in polymer composites
Resumo:
This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional
Resumo:
The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils
Resumo:
In heavy oil fields there is a great difficulty of the oil to flow from the reservoir to the well, making its production more difficult and with high cost. Most of the original volumes of oil found in the world are considered unrecoverable by the use of the current methods. The injection of micellar solutions has a direct action in the oil interfacial properties, resulting in an enhanced oil recovery. The objective of this research was the study and selection of micellar solutions with ability to decrease the interfacial interactions between fluids and reservoir formation, increasing oil production. The selected micellar solutions were obtained using commercial surfactants and surfactants synthesized in laboratory, based on the intrinsic properties of these molecules, to use in the enhanced oil recovery. Petroleum Reservoirs were simulated using sandstone plugs from Botucatu formation. Experiments with conventional and enhanced oil recovery techniques were accomplished. The obtained results showed that all micellar solutions were able to enhance oil recovery, and the micellar solution prepared with a SB anionic surfactant, at 2% KCl solution, showed the best recovery factor. It was also accomplished an economic analysis with the SB surfactant solution. With the injection of 20% porous volume of micellar solution, followed by brine injection, the increment in petroleum recovery can reach 81% recovery factor in the 3rd porous volume injected. The increment in the total cost by the addition of surfactant to the injection water represents R$ 7.50/ton of injected fluid
Resumo:
Because of disability in public policy development in mind to attend issues of sanitation in the municipalities, companies known as "clean-blue" appeared proposing to solve a simple collection and management of wastewater produced in single or multifamily residences, commercial, hospitals, etc. In the case of an activity in which there are no worries about the fate of sewage, emerged some doubts about the degree of health and environmental safety in these companies. Traditionally, most of them makes the provision of waste depleted soil or wetland, open, usually located on the outskirts of cities (MENESES, 2001). In turn, the sludge from septic tanks exhausted, provided no technical criteria - in the soil, rivers and as an agricultural fertilizer put in risk the health of the population and environmental quality. This work was entered in the search network 5 of the Notice of the Research Program in Sanitation - PROSAB-5, aimed to study the theme 'Characterization and study of alternative ways of treating sludge from septic tanks in the city of Natal, RN', proposing to evaluate the performance of the use of stabilization ponds as a system to handle waste from septic tanks exhausted. A series of lakes studied belong to one of the largest clean-pit of Natal, consisting of two anaerobic ponds, one facultative and maturation, and a tank disinfection, the wastewater being released in the Potengi River. Samples were collected between the months of October 2007 to October 2008, at six points previously defined and judged as more appropriate to what is proposed study. The analysis results in field and laboratory showed the most significant removal of COD (88.93%), total suspended solids (94.87%), organic nitrogen (66.87%) and thermotolerant coliforms (99.88%). Some results have not reached the expected because the system under study had operating problems that have undermined the efficiency of the reactors
Resumo:
In Brazil, 0-5 years old children just have an oral health care system since 1990 s. Innumerable experiences of implantation of the attendance to the babies in the cities had appeared throughout the years, but it hasn´t been evaluated the comparative effect between children displayed and not displayed to the program. In this regard, the main of this research was describe the Early Childhood Oral Health Care in public health service in Natal, Rio Grande do Norte, Brazil and evaluate the impact of this specific oral health care for babies by comparison of indicators between exposed and non-exposed children. It was created an experimental group, formed by children covered by program which was paired, based on sex, age and socioeconomic status, with a control group, formed by uncovered children. After filling ethical application, the parents of children were questioned about some risk factors to dental caries and, in sequence, it was accomplish an oral examination in the child. It was verified the Visible Plaque Index (VPI), Gingival Bleeding Index (GBI), dmf-s and verification of caries activity. The sample was 40 children in each group. The results showed, for VPI, a difference of 7 percentile points for the experimental group, however this difference had no statistical significance, obtained by Student s t test (p=0.314). In relation to GBI, the control group showed a low mean (0.8%) comparing with experimental group (2.77%) and this difference was statistically significant (p=0.003). The results for dmf-s and evaluation of caries activity showed no statistical difference between groups. Among the probable reasons for absence of impact of intervention, could be included: (a) the practice model was the same in two groups, or the difference was very weak and (b) the oral health care has intrinsic limitations for to impact on oral health in low income populations
Resumo:
Nowadays, the basic attention in health works according to the Health Family Program (HFP), which is responsible for the organization of the health services with view to provide an appropriate attendance to the needs of the population. Its expansion is expressive in whole country and, the oral health, included in this process, has been seen as a possibility of change the health practices centered in the disease. In face of this perspective, the proposal of study is to discover possible changes in the health care model of oral health in a district, made possible through the perception, evaluation and degree of satisfaction of the user s health service. To reach such objectives, the district of Macaíba in the State of Rio Grande do Norte, was chosen for operational subjects, such as time of implantation of HFP and great covering of this program. The current research used interviews structured with objectives and subjectives questions and questionnaires of socioeconomic characterization addressed to two hundred and seventy (270) individuals (ninety users of an Urban PSF, ninety of a Rural PSF and ninety of an unit non PSF). The analysis of the data was accomplished through the software SPSS/99, that made possible a statistical and analytic appreciation. The HFP units and non HFP units has shown to sort the common odontology problems of the community, and this didn't establish a direct relationship with the general satisfaction. On the other hands, the programmed consultation is related with lager satisfaction of the users. The access form to the odontology treatment of the Units, the satisfaction with the attendance rendered by the dentist and the equip, enough dentists for the community and the social class of the user were decisive for the general satisfaction with the service of oral health. On the other hand, variables as age and education, resolution of the problem and physical conditions of the unit didn't influence the general satisfaction. In spite of the progresses in the implantation of the oral health in ESF, preventive activities, visits at home, access and social participation still reproduce the traditional model of attendance, showing a primary change process
Resumo:
Among the traits of economic importance to dairy cattle livestock those related to sexual precocity and longevity of the herd are essential to the success of the activity, because the stayability time of a cow in a herd is determined by their productive and reproductive lives. In Brazil, there are few studies about the reproductive efficiency of Swiss-Brown cows and no study was found using the methodology of survival analysis applied to this breed. Thus, in the first chapter of this study, the age at first calving from Swiss-Brown heifers was analyzed as the time until the event by the nonparametric method of Kaplan-Meier and the gamma shared frailty model, under the survival analysis methodology. Survival and hazard rate curves associated with this event were estimated and identified the influence of covariates on such time. The mean and median times at the first calving were 987.77 and 1,003 days, respectively, and significant covariates by the Log-Rank test, through Kaplan-Meier analysis, were birth season, calving year, sire (cow s father) and calving season. In the analysis by frailty model, the breeding values and the frailties of the sires (fathers) for the calving were predicted modeling the risk function of each cow as a function of the birth season as fixed covariate and sire as random covariate. The frailty followed the gamma distribution. Sires with high and positive breeding values possess high frailties, what means shorter survival time of their daughters to the event, i.e., reduction in the age at first calving of them. The second chapter aimed to evaluate the longevity of dairy cows using the nonparametric Kaplan-Meier and the Cox and Weibull proportional hazards models. It were simulated 10,000 records of the longevity trait from Brown-Swiss cows involving their respective times until the occurrence of five consecutive calvings (event), considered here as typical of a long-lived cow. The covariates considered in the database were age at first calving, herd and sire (cow s father). All covariates had influence on the longevity of cows by Log-Rank and Wilcoxon tests. The mean and median times to the occurrence of the event were 2,436.285 and 2,437 days, respectively. Sires that have higher breeding values also have a greater risk of that their daughters reach the five consecutive calvings until 84 months
Resumo:
Goat breeding in the state of Rio Grande do Norte, Brazil has promising economic possibilities, with the proper handling of the natural resources. The introduction of specialized animals has been one of the ways used to improve herd genetics and increase productivity. However, climate has been one of the regional factors that most interferes with the adaptation of the new genetic prevalence resulting from the introduction of exotic breeds, because in their country of origin, the air temperature during most of the year is lower than the animals body temperature. With this in mind, the aim of this study was to characterize behavioral, physiological and morphological profiles and milk production of female Saanen goats belonging to different genetic groups raised in the semi-arid region of Rio Grande do Norte in Northeast Brazil. The study was conducted in the city of Lages (5° 42 00 S and 36° 14 41 W). We used 25 lactating female Saanen goats, distributed into 3 genetic groups: 5 purebred animals, 11 three-quarter bred and 9 half-bred. Behavioral observations were made over three consecutive days in the months of August and September, between 09:00 and 11:30h, when the animals were grazing. Physiological and meteorological data were recorded in the last three days of June, July, August and September at 05:00h and at 16:00h. In the semi-intensive breeding system, the animals from different genetic groups were similar in both field behavior and physiological response patterns. Although the purebred goats had longer hair, they did not show symptoms of thermal discomfort. Their white hair helped to reflect the short wavelength rays and thus eliminate those at the longer wave lengths. We concluded that the animals raised in the semi-intensive milk production system in this study seem to have adapted to the climatic conditions of the semi-arid region of Rio Grande do Norte, Brazil
Resumo:
Currently one of the major concerns in sports is to identify, select, discover and reveal talents in soccer. As principal reasons is perceived the search direct or indirect for resources for players, clubs, media, sports brands and their sponsors. However, high salaries are an exception and not a rule, because the majority of professional players in Brazil receives 1 minimum salary per month. It is also known that on professional clubs, daily, arriving several players to try to be a professional soccer player, however, the majority of clubs - almost all does not present methodological, systematic and analytical aspects to select promising players. The selective processes ("sieves" or "big sieves") developed by technical observers ( olheiros") summarized in the observation of the sportive performance of a big group of players in a period of few minutes given to each player. In this period the target behavior is the ability with the ball. If promising players are identified on that selection, they are referred to the club for a new observation, which will be conducted by the responsible coach of base category in question. It is understood by base categories, the amateur categories (not professional), to serve as a "base" for the formation of the cast of professional clubs. What are sub-13 (under 13 years), sub-15 (under 15 years), sub-17 (under 17 years) and sub-20 (under 20 years). The absence of common criterias and performance indicators of these professionals may hamper the evaluation of promising players, and be a costly activity for the club. This study proposes to identify, characterize and categorize the criterias and methods of behavioral evaluation, used by coaches of base categories of Rio Grande do Norte (RN) to evaluate the sportive performance of young soccer players, with the purpose of to compare the criterias of evaluation of sportive performance of young soccer players, used by coaches with different time of experience in function. The proposal had 2 pilot studies, the first (June and July, 2007) were interviewed 29 coaches, 17 of category sub-13 and 12 of category sub-17. The data were tabulated and organized into spreadsheets in order to describe, and developed a set of descriptors of behavior. And the second (May and June, 2008), with revisions made based on observations, analysis and descriptions found in the first, were interviewed 14 technical of category sub-15. After the results found in pilots, it was possible to outline the study in question, which had 46 coaches base categories of the RN. And from the results show that the characteristic of greatest importance, according to the interviewees was the behavior, the 2nd most important characteristic considered was the motivation, the 3rd was the ability and the 4th was the physical condition and the last was the affiliation. And by analyzing the results to the methods of evaluation of sportive performance used by coaches, it was noted clearly that most uses only the observation to select young soccer players. Therefore, needs a systematization to the selection of soccer players, since there is complexity in the verification of characteristics and aspects involved with purpose to avoid wrong evaluations and selections and the results negligible
Resumo:
The objective of this study was to analyze the oxidative stability of biodiesel from jatropha obtained from different purification processes, three wet processes with different drying (in a vacuum oven, conventional oven and in anhydrous sodium sulfate) and dry (purification with magnesium silicate adsorbent). Raw materials of different qualities (jatropha crop ancient and recent crop) were used. The Jatropha oil was extracted by mechanical extraction and refined. The Jatropha biodiesel was obtained by the transesterification reaction in ethyl route using alkaline catalysis. The biodiesel samples were characterized by analysis of water content, carbon residue, Absorption Spectroscopy in the Infrared Region and Thermogravimetry. Thermogravimetric curves of purified PUsv* PUsq* and had higher initial decomposition temperatures, indicating that the most stable, followed by samples PU* and PUSC*. Besides the sample SP* is a smaller initial temperature, confirming the sample without purification to be less thermally stable. The percentage mass loss of the purified samples showed conversion of about 98.5%. The results of analyzes carbon residue and infrared suggested that contamination by impurities is the main factor for decreased oxidative stability of biodiesel. The oxidative stability was assessed from periodic monitoring, using the techniques of Rancimat, peroxide index, acid value and Pressurized Differential Scanning Calorimetry. Samples of biodiesel from jatropha which showed better oxidative stability were of the best quality raw material and wet scrubbing: PUsq* with dry chemical, using anhydrous sodium sulfate and PUsv* with vacuum drying, which had oxidative stability 6 hours in Rancimat time 0 days, within the limits established by the Technical Regulation No. 4/2012 of the ANP, without the addition of antioxidant, suggesting that these procedures the least influence on the oxidative stability of biodiesel