Avaliação da incorporação de cinzas de lodo de esgoto como adição mineral em concretos de cimento Portland

O desenvolvimento das grandes cidades tem gerado um dos maiores desafios ambientais enfrentados na atualidade, que é a gestão eficaz de resíduos sólidos. A grande variedade e quantidade dos resíduos produzidos diariamente, tem tornado a destinação ecologicamente correta e sustentável destes materiais cada vez mais difícil. Dentre os vários resíduos produzidos diariamente destacam-se os lodos oriundos de estações de tratamento de esgotos, denominados de lodos de esgoto, cuja destinação final segura tem sido discutida mundialmente em diversos estudos, tendo em vista que a tendência de geração deste tipo de resíduo tende a crescer com o aumento do saneamento das cidades. Uma forma amplamente difundida nos países desenvolvidos para destinação dos lodos de esgoto é a incineração destes materiais para posterior envio das cinzas geradas neste processo a aterros sanitários. Porém, tem-se estudado formas alternativas de disposição, destacando-se a utilização destas cinzas como adição mineral em concretos e argamassas de cimento Portland. Sabe-se que o desempenho de resíduos de incineração como adição mineral em matrizes cimentícias, depende em grande parte da capacidade de atuação destes materiais como elementos pozolânicos ou como fileres, podendo estas características serem influenciadas pela temperatura de queima ao qual estes resíduos foram submetidos. Neste sentido, verificou-se com esta pesquisa a influência da temperatura empregada na queima dos lodos sépticos no índice de atividade pozolânica (IAP) das cinzas geradas como resíduo deste processo, aqui denominadas de cinzas de lodo séptico (CLS), sendo em seguida, avaliadas as implicações técnicas e microestruturais da utilização deste resíduo em teores de 10%, 20% e 30% como adição mineral em concretos de cimento Portland. Os resultados obtidos demonstraram não haver alterações significativas no IAP das CLS em decorrência da temperatura utilizada durante o processo de queima dos lodos de esgoto. Além disso, verificou-se que embora a utilização das CLS tenham provocado diminuição da trabalhabilidade dos concretos para todos os teores de incorporação, estas melhoraram a resistência mecânica à compressão, o índice de vazios, a absorção de água e o comportamento microestrutural dos concretos contendo 10% e 20% de resíduo

Estudo da viabilidade da utilização de cinza de lodo de esgoto como adição em argamassa de cimento Portland

The use of sewage sludge as a raw material falls within the waste recycling key in the current process model environmental sustainability .Waste recycling has been consolidated as a sustainable environmentally sound technical solution, and. Despite showing very variable composition and characteristics, sewage sludge, can be considered as a residue with a high recycling potential in the building sector. In this paper the feasibility of using sewage sludge ash was studied in addition to Portland cement mortar in 1:3 mass considered the standard dash. This gray additions were studied in proportions of 5%, 10 %, 15 %, 20 %, 25% and 30% by mass of cement. The methodology was focused on the characterization of materials by physical, chemical , mechanical , environmental and morphological followed by the production of mortar tests ,and finalized by the characterization tests of mortar in the fresh state, through the consistency index, content of entrained air, bulk density and water retention, and in the hardened state by bulk density, water absorption by capillarity capillarity coefficient, compressive strength, tensile strength in bending ,tensile bond strength and microstructural analysis for percentages of 0 to 20%. After comparing with the standard mortar mortars with addition of ash, it is concluded that the ash of sewage sludge did not impair the integrity and properties of mortars with addition, including increasing resistance to compression and tension, being 20% more indicated percentage. Thus, it becomes feasible the addition of sewage sludge ash in Portland cement mortar for the trait studied

Desempenho de argamassas produzidas com agregados reciclados oriundos do resíduo de construção e demolição da Grande Natal-RN

The construction industry is responsible for generating a lot of waste because of their activities. Consequently, it is noticeable the occurrence of environmental problems in terms of its disposal in inappropriate places. Faced with this problem, some studies have been conducted with the aim of developing technologies and alternatives for recycling construction and demolition waste (CDW), motivated by the scarcity of natural resources and reduction of environmental problems generated. The research aims to characterize the recycled aggregates derived from construction and demolition waste (CDW) produced in the Greater Natal-RN and analyze the performance of mortar coating produced with recycled aggregates. The study includes the chemical , physical and microstructural characterization of recycled aggregates , as well as conducting microscopic analysis and laboratory tests in the fresh state (consistency index , water retention , bulk density and content of entrained air ) and in the hardened state ( compressive strength , tensile strength in bending , water absorption by immersion and capillary , mass density and void ratio ) for mortars produced from different levels of substitution of aggregates ( 0, 20 %, 40 %, 60 %, 80 % and 100 %). The results were satisfactory, providing mortars produced with recycled aggregates, smaller mass density and dynamic modulus values as well as an increase in the rates of absorption and porosity. The tensile strength in bending and compression for TP1 (1:2:8) trait were lower for mortars produced with recycled aggregates and the best result was 20% for replacement. For the TP2 (1:8) mapping, there was an increase in resistance to traction and compression and the best result was for 100% replacement of natural aggregates by recycled. The experiments led to the conclusion that the technical and economic point of view that the mortars produced with recycled aggregates can be used in construction, only if there is an effective control in production processes of recycled aggregate and at the dosage of mortars

Avaliação da eficiência dos investimentos do programa Inova-RN em micro e pequenas empresas Uma integração da análise envoltória de dados e índice Malmquist

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Algoritmo SOM com estrutura hierárquica e dinâmica aplicado a compressão de imagens

ln this work the implementation of the SOM (Self Organizing Maps) algorithm or Kohonen neural network is presented in the form of hierarchical structures, applied to the compression of images. The main objective of this approach is to develop an Hierarchical SOM algorithm with static structure and another one with dynamic structure to generate codebooks (books of codes) in the process of the image Vector Quantization (VQ), reducing the time of processing and obtaining a good rate of compression of images with a minimum degradation of the quality in relation to the original image. Both self-organizing neural networks developed here, were denominated HSOM, for static case, and DHSOM, for the dynamic case. ln the first form, the hierarchical structure is previously defined and in the later this structure grows in an automatic way in agreement with heuristic rules that explore the data of the training group without use of external parameters. For the network, the heuristic mIes determine the dynamics of growth, the pruning of ramifications criteria, the flexibility and the size of children maps. The LBO (Linde-Buzo-Oray) algorithm or K-means, one ofthe more used algorithms to develop codebook for Vector Quantization, was used together with the algorithm of Kohonen in its basic form, that is, not hierarchical, as a reference to compare the performance of the algorithms here proposed. A performance analysis between the two hierarchical structures is also accomplished in this work. The efficiency of the proposed processing is verified by the reduction in the complexity computational compared to the traditional algorithms, as well as, through the quantitative analysis of the images reconstructed in function of the parameters: (PSNR) peak signal-to-noise ratio and (MSE) medium squared error

Compressão auto-adaptativa de imagens coloridas

Image compress consists in represent by small amount of data, without loss a visual quality. Data compression is important when large images are used, for example satellite image. Full color digital images typically use 24 bits to specify the color of each pixel of the Images with 8 bits for each of the primary components, red, green and blue (RGB). Compress an image with three or more bands (multispectral) is fundamental to reduce the transmission time, process time and record time. Because many applications need images, that compression image data is important: medical image, satellite image, sensor etc. In this work a new compression color images method is proposed. This method is based in measure of information of each band. This technique is called by Self-Adaptive Compression (S.A.C.) and each band of image is compressed with a different threshold, for preserve information with better result. SAC do a large compression in large redundancy bands, that is, lower information and soft compression to bands with bigger amount of information. Two image transforms are used in this technique: Discrete Cosine Transform (DCT) and Principal Component Analysis (PCA). Primary step is convert data to new bands without relationship, with PCA. Later Apply DCT in each band. Data Loss is doing when a threshold discarding any coefficients. This threshold is calculated with two elements: PCA result and a parameter user. Parameters user define a compression tax. The system produce three different thresholds, one to each band of image, that is proportional of amount information. For image reconstruction is realized DCT and PCA inverse. SAC was compared with JPEG (Joint Photographic Experts Group) standard and YIQ compression and better results are obtain, in MSE (Mean Square Root). Tests shown that SAC has better quality in hard compressions. With two advantages: (a) like is adaptive is sensible to image type, that is, presents good results to divers images kinds (synthetic, landscapes, people etc., and, (b) it need only one parameters user, that is, just letter human intervention is required

Compressão Seletiva de Imagens Coloridas com Detecção Automática de Regiões de Interesse

There has been an increasing tendency on the use of selective image compression, since several applications make use of digital images and the loss of information in certain regions is not allowed in some cases. However, there are applications in which these images are captured and stored automatically making it impossible to the user to select the regions of interest to be compressed in a lossless manner. A possible solution for this matter would be the automatic selection of these regions, a very difficult problem to solve in general cases. Nevertheless, it is possible to use intelligent techniques to detect these regions in specific cases. This work proposes a selective color image compression method in which regions of interest, previously chosen, are compressed in a lossless manner. This method uses the wavelet transform to decorrelate the pixels of the image, competitive neural network to make a vectorial quantization, mathematical morphology, and Huffman adaptive coding. There are two options for automatic detection in addition to the manual one: a method of texture segmentation, in which the highest frequency texture is selected to be the region of interest, and a new face detection method where the region of the face will be lossless compressed. The results show that both can be successfully used with the compression method, giving the map of the region of interest as an input

Capacidade de absorção de energia de tubos de compósitos submetidos à compressão

Structures capable of absorbing large amounts of energy are of great interest, particularly for the automotive and aviation industries, to reduce tbe impact on passengers in the case of a collision. The energy absorption properties of composite materials structures can be tailored, thus making these structures an appealing option a substitute of more traditional structures in applications where energy absorption is crucial. ln this research, the influence of some parameters, which affect the energy absorption capacity of composite material tubes, was investigated. The tubes were fabricated by hand lay-up, using orthophthalic polyester resin and a plain weave E-glass fabric Test specimens were prepared and tested under compression load. The ínfluence of the following parameters on the specific energy absorption capacity of the tubes was studied: fiber configuration (0/90º or ± 45°), tube cross-section (circular or square), and processing conditions (with or without vacuum). The results indicated that circular cross-section tubes with fibers oriented at 0/90º presented the highest level of specific energy absorbed. Further, specimens from tubes fabricated under vacuum displayed higher energy absorption capacity, when compared with specimens from tubes fabricated without vacuum. Thus, it can be concluded that the fabrication process with vacuum produce composite structures with better energy absorption capacity

Análise teórico-experimental do coeficiente de perfomance (COP) de um sistema de refrigeração por jato-compressão

The use of waste heat of energy conversion equipment to produce a cooling effect, consists currently in a very interesting way of efficiency improvement of energy systems. The present research has as intention the theoretical and experimental study of a new intermittent refrigeration system ejector cycle characteristics, with use of waste heat. Initially, was doing a bibliographical survey about the vapor ejector refrigeration system technology. In the following stage was doing a simulation of the corresponding thermodynamic cycle, with preliminarily intention to evaluate the performance of the system for different refrigerants fluids. On the basis of the results of the simulation were selected the refrigerant fluid and developed an experimental group of benches of the refrigeration system considered, where pressure and temperature sensory had been inserted in strategical points of the refrigeration archetype and connected to a computerized data acquisition system for measure the refrigerant fluid properties in the thermodynamic cycle. The test results obtained show good agreement with the literature

Remoção de hidrocarbonetos do gás natural visando o ajuste do índice de metano

The use of the natural gas is growing year after year in the whole world and also in Brazil. It is verified that in the last five years the profile of natural gas consumption reached a great advance and investments had been carried through in this area. In the oil industry, the use of the natural gas for fuel in the drive of engines is usual for a long date. It is also used to put into motion equipment, or still, to generate electric power. Such engines are based on the motor cycle of combustion Otto, who requires a natural gas with well definite specification, conferring characteristic anti-detonating necessary to the equipment performance for projects based on this cycle. In this work, process routes and thermodynamic conditions had been selected and evaluated. Based on simulation assays carried out in commercial simulators the content of the methane index of the effluent gas were evaluated at various ranges of pressure, temperature, flowrate, molecular weight and chemical nature and composition of the absorbent. As final result, it was established a route based on process efficiency, optimized consumption of energy and absorbent. Thereby, it serves as base for the compact equipment conception to be used in locu into the industry for the removal of hydrocarbon from the natural gas produced

Remoção de nitrogênio em biofiltros aerado e anóxico, com alto índice de vazios e sem remoção de lodo

The improper disposal of nitrogen in receiving water courses causes problems such as toxicity to living beings through the consumption of oxygen to meet the nitrogen demand, eutrophication and nitrate contamination of aquifers. For this reason it is often necessary to be carried out complementary treatment of wastewater to eliminate or reduce the concentration of this compound in the wastewater. The objective of this study is to evaluate the biological removal of nitrogen compounds using submerged aerated and anoxic filters as post-treatment of an anaerobic system, with low cost and innovative technology, which in previous studies has shown high removal efficiency of organic matter and great potential biological nitrogen compounds removal. The simple design with perforated hoses for air distribution and filling with plastic parts proved to be very efficient in relation to organic matter removal and nitrification. The system presented, in the best stage, efficiency in converting ammonia to nitrate by 71%, and produced a final effluent concentration below 10 mg / L of NH3-N. In addition, carbon concentration was removed by 77%, producing final effluent with 24 mg/L COD. However, denitrification in anoxic filter was not effective even with the addition of an external carbon source. There was a reduction of up to 56% of nitrogen caused by the process of simultaneous nitrification and denitrification (SND). The high voids space presented by this type of support material coupled with direct aeration of the sludge, allows the respiration of biomass retained between the endogenous phase, increased cell retention time and sludge retention capacity, producing a final effluent with turbidity less than 5 UT and total suspended solids around 5.0 mg/L

Avaliação clínica da relação entre o índice de placa, índice gengival, alinhamento dental, mucosa ceratinizada, tipo de periodonto e distúrbios oclusais com a ocorrência de recessão gengival

This study clinically evaluated the relationship of gingival recessions with the periodontal index of gingival and plaque, dental alignment, keratinized mocous, type of periodontal, and occlusal disorders. Study participants were individuals aged between 19 and 33 years. The evaluations were performed by using questionnaires and clinical examinations. In subjects examined, the teeth were assessed and divided into groups (Molars, premolars, canines and incisors). The gingival recession were measured in the central region of the teeth and individuals were subject to disclosure to the plate and observing the poll of plaque and gingival index, respectively. 558 teeth were examined, with 24.1%, 135 had gingival recession greater than or equal to 1mm. Through the combination of tests used to evaluate the average of the recession and its relationship with the variables studied, we observed that the degree of recession of the elements assessed dental showed, almost for the most part, when higher values associated with the index plaque (p = 0.101), Gingival Index (p = 0.053), dental alignment (p = 0.962), width of keratinized mocous (p = 0.004) and type of periodontium (p = 0.033), however statistically significant difference could only be considered when related the recessions in the keratinized mocous and the type of the periodontium. Although we identify, when we evaluate the whole set of teeth that occlusal disturbances (p = 0.002) were more strongly associated with cases of gum recession that the gingival index (p = 0.006), however, these two conditions were correlated with the cases of recession, contributing to its occurrence

Expressão imuno-histoquímica da calponina em glândula parótida de rato após obstrução do ducto excretor principal

Glandular atrophy is one of several alterations which can aflict the salivary glands, caused generally by obstructive lesions such as sialo1ithiasis, infections or compression by neoplastic processes arnong others. In this work, a morphological and immunohistochemical study was carried out in rat parotid glands, which were submitted to obstruction of the main excretory duct suffering atrophy at varied time intervals, with the aim of appraising the behavior of myoepithelial cells during the process of glandular atrophy. It was analized the immunohistochemical expression of calponin which detects myoepithelial cells in the parotids of 28 animaIs, which were divided into 7 groups, each one made up of 4 rats, afier the ductal ligature procedure, in the following time intervals: zero hour (control), 24 hours, 7, 15, 21, 30 and 60 days. Analysis of the immunohistochemicaI profile was carried through in which the calponin expression was veritied through its distribution pattem and numericaI index. All specimens exhibited positivity for calponin in myoepithelial cells which were distributed around the acini and the ductaI structures, a small number of positiveIy marked cells being detected in the controI group and in the 24-hour group when compared to subsequent ones, where it was perceived a Iarge increase in the number of positiveIy marked cens, mainly surrounding the ductiform structures which originated during the obstruction time. Upon application of statistical tests it was verified that the rise in the number the myoepithelial positive cells for calponin, when the control groups (zero hour) was compared to the 7, 15,21, 30 and 60-day groups afier obstruction, was statistica1ly significant. It was concluded then that the detected rise probably carne about due to an elevation in the rate of proliferation of the myoepitheliaI cells subsequent to the ductal obstruction, associated with a growing resistance of these cells to glandular atrophy.

Estudo imuno-histoquímico da expressão da glut-1 e mensuração do índice angiogênico (CD34) em adenomas pleomórficos, carcinomas adenóides císticos e carcinomas mucoepidermóides de glândulas salivares

The expression of glucose transporter protein 1 (GLUT-1), as well the angiogenesis has been associated to clinical behavior and aggressiveness in tumors of various origin. It is believed that the expression of this protein denotes metabolic demand of the tumor cells and, thus its influence upon the formation of new blood vessels. Pleomorphic adenoma (PA) and the adenoid cystic carcinoma (ACC) and mucoepidermoid carcinoma (MEC) represent, respectively, the most commom benign and malignant tumors of salivary glands. The aim of this study was to analyze and compare the immunohistochemical expression of GLUT-1 and its correlation with angiogenesis in cases of PAs, ACCs and MECs considering their histological grades. The sample consisted of 20 PAs, 20 ACCs and 10 MECs. The cases were analyzed and classified according to their histological grades. The expression of GLUT-1 was evaluated in the parenchyma lesions, establishing the percentage of immunopositive cells, according to the following scores: 0 (no cell immunomarked), 1 (up to 25% of tumor cells immunostained), 2 (25 - 50% of tumor cells immunostained) and 3 (more than 50% of tumor cells immunostained). The angiogenic index was analyzed by counting the microvessels immunostained by anti-CD34 antibody, in 5 fields (200X). The analysis of the expression of GLUT-1 in tumor parenchyma showed statistically significant differences between benign and malignant groups (p = 0.022). The average number of microvessels in PAs was 40.4, 21.2 in ACCs and 66.5 in MECs, with significant differences between groups (p <0.001). When compared to the expression of GLUT-1 and angiogenic index as a whole, there was no significant correlation between the number of microvessels and the expression of GLUT-1 (r = 0.211, p = 0.141). In conclusion, the results of this study suggest not only that differences in biological behavior between PAs, ACCs and MECs may be associated to the expression of GLUT-1, but also that benign and malignant salivary gland present differences in the average number of microvessels, with higher levels considered more aggressive tumors. Furthermore, the number of newly formed microvessels can be independent of the metabolic demand of the tumor cells

Estudo da imunoexpressão de RANKL e OPG, do índice angiogênico (CD34) e da presença de miofibroblastos (α-SMA) em ceratocistos odontogênicos isolados e associados à síndrome de Gorlin

The odontogenic keratocysts are distinguished from other odontogenic cystic lesions by their potentially aggressive clinical behavior and association, in some cases, with Gorlin syndrome. Studies have suggested that syndrome keratocysts, in comparison with sporadic lesions, have higher growth and infiltration capacity and higher recurrence tendency. The aim of this study was to analyze, by means of immunohistochemistry, the expressions of receptor activator of nuclear factor κB ligand (RANKL) and osteoprotegerin (OPG), the angiogenic index (CD34) and the presence of myofibroblasts (α-SMA) in primary and recurrent sporadic keratocysts and in keratocysts associated with Gorlin syndrome. The sample was composed by 30 sporadic keratocysts (22 primary and 8 recurrent) and 22 syndrome keratocysts. In the epithelium and in the fibrous capsule of the lesions, the immunoexpression of RANKL and OPG was evaluated by determination of the percentage of positive cells, according to the following scores: 0 (less than 10% of positive cells), 1 (11% - 50% of positive cells), 2 (51% - 75% of positive cells) and 3 (more than 76% of positive cells). In addition, cases were classified according to the RANKL score/ OPG score ratio, as follows: RANKL > OPG, RANKL < OPG, and RANKL = OPG. The angiogenic index was analyzed by counting the microvessels immunoreactive to anti-CD34 antibody in 5 fields (200). The analysis of myofibroblasts was performed by counting the cells immunoreactive to anti-α-SMA antibody in 10 fields (400). The analysis of the expressions of RANKL and OPG in the epithelial lining and in the fibrous capsule did not reveal significant differences between groups (p > 0.05). Regarding the RANKL/ OPG ratio in the epithelial lining, most sporadic primary (54.5%) and syndrome lesions (59.1%) showed RANKL < OPG ratio and RANKL = OPG ratio, respectively (p > 0.05). With respect to the RANKL/ OPG ratio in the fibrous capsule, the majority of sporadic primary (81.8%) and sporadic recurrent lesions (75.0%) and most syndrome lesions (45.5%) showed RANKL = OPG ratio (p > 0.05). The mean number of microvessels was 69.2 in sporadic primary lesions, 67.6 in recurrent lesions, and 71.6 in syndrome lesions, with no significant differences between groups (p > 0.05). The mean number of myofibroblasts was 34.4 in sporadic primary lesions, 29.3 in recurrent lesions, and 33.7 in syndrome lesions, with no significant differences between groups (p > 0.05). In conclusion, the results of the present study suggest that the differences in the biological behavior between sporadic keratocysts and keratocysts associated with Gorlin syndrome may not be related to the expressions of RANKL and OPG, the RANKL/ OPG ratio, the angiogenic index or the number of myofibroblasts in these lesions