Identidade e docência: o saber-fazer do professor de sociologia das escolas públicas estaduais de Picos - PI

This study deals with Sociology teacher identity issues. This is done considering daily routines of Sociology grade school teachers in the city of Picos in the state of Piauí-Brazil. Thus, the research aims to acknowledge the manner the inter-relations between the teacher s know-how and the process of construction of the professional identity of these teachers occur. It is seen that the discipline of Sociology in this context brings out processes related to inclusion and exclusion once the subject of Sociology is distinguished as unstable in relation to other disciplines. However, in June 2008, the law included the Sociology as a discipline 11,684 mandatory on all high school series.The theoretical and methodological procedures of this research were based on an ethnographic qualitative nature research and enabled a documental analysis. In order to collect data, a semi-structured questionnaire was applied in collective and individual in four state schools in the city of Picos in Piauí. The analysis of the information was based in content analysis from the proposals made by Bardin (1997), and Franco (2008). The information was then organized in knowledge matrixes that allowed the identification of themes divided into two thematic axes: teacher education: the search for sense making in experience and the exercise of teaching as well as the Sociology grade school teacher s daily routine. The research enables the understanding of the senses the subjects have on their own activity since the work deals with concrete situations and experiences in the scholar context. These senses are considered relevant in order to enable a comprehension of the inter-relations that are established between the know-how and the construction of the identity on behalf of these teachers. Almost all of the interviewed subjects did not have a degree in Social Sciences and came from other backgrounds especially ones related to Education. Sociology teachers investigated almost in its entirety, do not have specific training in the social sciences, becoming teachers of Sociology by lack of school and to complete the work load. But, in spite of the difficulties experienced in the practice of the discipline all are in favour of its inclusion in high school. They have a clear vision, that through the work of the theoretical content of the discipline with the daily life of the students by using teaching strategies that add value to the relationship of knowledge that are prepared in society at large, to Sociology provides a critical analysis of the reality in which they are inserted

O sertanejo e o sevilhano nos poemas de João Cabral de Melo Neto: o lusco-fusco barroco

The aim of this research is, starting from a Baroque reading, unfold the understanding of the poems by João Cabral de Melo Neto in the axis Pernambuco-Spain. From this perspective, the reading of poet s Obra Completa allows the appearance of two persons, one from Seville and other from the Brazilian countryside, whom curiously pulsate and reveal themselves from their homelands, Brazilian northeastern dry lands and Seville, to a labyrinthy meeting establishing a close and exciting relationship of cities apart but which mark a contiguous dialogue between both cultures. The theorical effort of this investigation permeates, approaches and contrasts the directions of, among others, Severo Sarduy (1999), Gilles Deleuze (2012) and Eugenio D Ors (unknown). Not traveling an anthropological bias, this study observes the Spanish space and the Brazilian northeastern dry lands space, joining the regional to the universal and analyzes the baroque game in the (re) construction of the both men s cultures. These elements fuse, approach and move away, causing a game of allusions to Pernambuco and Spain that show itself through a similar cultural bias and different at the same time. From this apprehension it is possible to understand the synthesis of the Brazilian arid northeast-Seville men as a update of seventeenth century Baroque coming from indexes that are shown over the particular written by João Cabral de Melo Neto, in the Iberian Baroque scenario and in the American one s

A travessia do trágico no romance d A Pedra do Reino de Ariano Suassuna

The present work seeks to investigate and discuss about the Greek Tragedy s elements at Ariano Suassuna s romance called τ Romance d A Pedra do Reino e o Principe do Sangue do Vai e Volta, connecting it directly to mythic, epic, poetic, and romances aspects at his work. The romance has as the protagonist the backcountry Pedro Dinis Quaderna. Quaderna is a character which is simultaneously popular, elitist, enigmatic, naive, and an intellectual man that has a great erudition. Quaderna is a character that seeks, by using the Literature, to reestablish a Brazilian backcountry kingdom which he s supposedly the king, always trying to empathizes the Brazilian northeast region like if it was a nation apart. By impressing a national personality to the Brazilian northeast , Quaderna tries to become an epic poet just like Homer, denoting a strong influence of the Epopee. Quaderna, just like many characters of Greek Tragedy, has at his family past time a lot of tragic circumstances. These facts that ocurred to his relativos like the your uncle Pedro Sebastião Garcia Barreto s death, the disappearement of his cousin Sinésio, and the contest between the brothers Arésio and Sinésio, and others aspects, remind us remarkable influences, beyond the Epopee, of the Greek Tragedy. By reading the romance we may notice many similarities between Quaderna s trajectory and Greek Tragedy heroes. To make an analysis about the tragic aspects at Suassuna s work, we need to dialogue with many theoreticals that have written about the tragic and comparate with many parts of Suassuna s with classics character s texts of Greek Tragedy. At the following chapters we seek to provide romance s elementaries notions, as well as tragic notions, the dialogue with mythics aspects and the tragic and epic aplicability at Suassuna s work

Ecologia alimentar e reprodutiva da piaba-do-rabo-amarelo, Astyanax cf. lacustris (Reinhardt, 1874) (Osteichthyes: Characidae) na Lagoa do Piató, Assu, Rio Grande do Norte, Brasil

The feeding habits and biological aspects of the reproductive cycle of two-spot astyanax, Astyanax cf. lacustris (Reinhardt, 1874) were investigated. Fish samples were captured on a monthly basis, using gillnets of 4 cm mesh size, from the Piató Lake, Assu, Rio Grande do Norte, during the period of September, 2006 to August, 2007. Physico-chemical parameters, such as, temperature, electrical conductivity and dissolved oxygen of the lake were registered. The monthly values of rainfall also were obtained. The 360 individuals captured, were measured, weighed, dissected, and stomach weight and the stage of gonadal maturity were registered. The stomach contents analyses were carried out based on volumetric method, points, frequency of occurrence and applying the Index of Relative Importance. The degrees of repletion of the stomachs were determined besides the Index of Repletion relating to feeding activity variations and frequency of ingestion with limnological parameters and rainfall. The food items identified were separated into distinct groups according to their origin. Sex ratio and Gonadosomatic Relation of females were verified to determine the spawning period and fecundity. The physico-chemical parameters presented the following annual mean values: temperature = 28.8ºC, electrical conductivity = 992.5 µS.cm-1; dissolved oxygen = 4.9 mg.L-1 during the study period. The annual mean of the rainfall was 63.5 mm. The results indicate that this species present an omnivorous feeding habit with a tendency towards insectivory, with an increase in feeding activity during the dry season. The aquatic oxygen to interfere very importance in the feeding activity than the others factors physico-chemicals of water and rainfall. There was a predominance of females, with a sex proportion of 1M:7F. The macroscopic characteristics of the ovaries and testicles revealed four stages of gonadal development: immature, maturing, mature and spent. A temporal variation was observed for the gonadal development of males and females. There was reproductive activity through out the year, with peaks in the months of February, April and June to correspond with the rain of precipitation of the region. The mean fecundity was 7.681 mature oocytes, varying from 4.476 to 12.036, with mean of 7.681. There was positive relation between fecundity and body mass. Condition Factor is not an efficient indicator of the reproductive period of this species. The species A. cf. lacustris is an opportunist and is well adapted to the conditions of the semi-arid Caatinga Biome

Atividade β-D-N-Acetilglucosaminidásica de enzimas imobilizadas extraídas da Artemia franciscana e possíveis aplicações biotecnológicas

A β-D-N-acetilglucosaminidase extracted and partially isolated from crustacean Artemia franciscana by ammonium sulfate precipitation and filtration gel chromatography Bio Gel A 1.5m. the enzyme was immobilized on ferromagnetic Dacron yielding a insoluble active derivative with 5.0 units/mg protein and 10.35% of the soluble enzyme activity. β-D-N-acetilglucosaminidase-ferromagnetic Dacron was easily removed from the reaction mixture by a magnetic field, it was reused for ten times without loss in its activity. The ferromagnetic Dacron was better activated at pH 5.0. The particles visualized at scanning electron microscope (SEM) had presented different sizes, varying between 721nm and 100µm. Infra red confirmed immobilization on support, as showed by primary amino peaks at 1640 and 1560 cm-1 . The immobilize enzyme presented Km of 2.32 ± 0.48 mM and optimum temperature of 50°C. Bought presented the same thermal stable of the soluble enzyme and larger enzymatic activity at pH 5.5. β-D-N-acetilglucosaminidase-Dacron ferromagnético showed sensible for some íons as the silver (AgNO3), with loss of activity. The β-D-N acetilglucosaminidase activity for mercury chloride (HgCl2), whom is one of the most toxic substance joined in nature, it was presented activity already diminished at 0,01mM and lost total activity at 4mM, indicating sensitivity for this type of metal. β-D-N-acetilglucosaminidase-ferromagnetic Dacron showed degradative capacity on heparan sulfate, the enzyme still demonstrated degradative capacity on heparan sulphate, suggesting a possible application to produce fractions of this glycosaminoglycan

Efeito da moagem de alta energia na microestrutura e nas propriedades magnéticas do compósito wc-10%p.Co

This work a studied the high energy milling effect in microstructure and magnetic properties of the WC-10wt.%Co composite. The composite powders were prepared by mechanical mixed and milled at 2 hours, 100 hours, 200 hours and 300 hours in planetary milling. After this process the composite were compacted in stainless steel die with cylindrical county of 10 mm of diameter, at pressure 200 Mpa and sintered in a resistive furnace in argon atmosphere at 1400 oC for 5 min. The sintered composite were cutted, inlaid, sandpapered, and polished. The microestrutural parameters of the composite was analyzed by X-ray diffraction, scanning electronic microscopy, optical microscopy, hardness, magnetic propriety and Rietveld method analyze. The results shows, with milling time increase the particle size decrease, it possibility minor temperature of sintering. The increase of milling time caused allotropic transformation in cobalt phase and cold welding between particles. The cold welding caused the formation of the particle composite. The X-ray diffraction pattern of composite powders shows the WC peaks intensity decrease with the milling time increase. The X-ray diffraction pattern of the composite sintered samples shows the other phases. The magnetic measurements detected a significant increase in the coercitive field and a decrease in the saturation magnetization with milling time increase. The increase coercitive field it was also verified with decrease grain size with milling time increase. For the composite powders the increase coercitive field it was verified with particle size reduction and saturation magnetization variation is relate with the variation of free cobalt. The Rietveld method analyze shows at milling time increase the mean crystalline size of WC, and Co-cfc phases in composite sintered sample are higher than in composite powders. The mean crystallite size of Co-hc phase in composite powders is higher than in composite sintered sample. The mean lattice strains of WC, Co-hc and Co-cfc phases in composite powders are higher than in composite sintered samples. The cells parameters of the composite powder decrease at milling time increase this effect came from the particle size reduction at milling time increase. In sintered composite the cells parameters is constant with milling time increase

Adição de nanopartículas de Ti em matriz de Fe através da deposição por magnetron sputtering

Microalloyed steels constitute a specific class of steel with low amount of carbon and microalloying elements such as Vanadium (V), Niobium (Nb) and Titanium (Ti). The development and application of microalloyed steels and steels in general are limited to the handling of powders with particles of submicron or nanometer dimensions. Therefore, this work presents an alternative in order to construction of microalloyed steels utilizing the deposition by magnetron sputtering technique as a microalloying element addiction in which Ti nanoparticles are dispersed in an iron matrix. The advantage of that technique in relation to the conventional metallurgical processes is the possibility of uniformly disperse the microalloying elements in the iron matrix. It was carried out deposition of Ti onto Fe powder in high CH4, H2, Ar plasma atmosphere, with two deposition times. After the deposition, the iron powder with nanoparticles of Ti dispersed distributed, were compacted and sintered at 1120 ° C in resistive furnace. Characterization techniques utilized in the samples of powder before and after deposition of Ti were Granulometry, Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (DRX). In the case of sintered samples, it was carried out characterization by SEM and Vickers Microhardness assays. The results show which the deposition technique by magnetron sputtering is practicable in the dispersion of particles in iron matrix. The EDX microanalysis detected higher percentages of Ti when the deposition were carried out with the inert gas and when the deposition process was carried out with reactive gas. The presence of titanium in iron matrix was also evidenced by the results of X-ray diffraction peaks that showed shifts in the network matrix. Given these results it can be said that the technique of magnetron sputtering deposition is feasible in the dispersion of nanoparticles of iron matrix in Ti.

Influência dos parâmetros de processo na deposição de nitreto de titânio por plasma em gaiola catódica

Titanium nitride films were grown on glass using the Cathodic Cage Plasma Deposition technique in order to verify the influence of process parameters in optical and structural properties of the films. The plasma atmosphere used was a mixture of Ar, N2 and H2, setting the Ar and N2 gas flows at 4 and 3 sccm, respectively and H2 gas flow varied from 0, 1 to 2 sccm. The deposition process was monitored by Optical Emission Spectroscopy (OES) to investigate the influence of the active species in plasma. It was observed that increasing the H2 gas flow into the plasma the luminescent intensities associated to the species changed. In this case, the luminescence of N2 (391,4nm) species was not proportional to the increasing of the H2 gas into the reactor. Other parameters investigated were diameter and number of holes in the cage. The analysis by Grazing Incidence X-Ray Diffraction (GIXRD) confirmed that the obtained films are composed by TiN and they may have variations in the nitrogen amount into the crystal and in the crystallite size. The optical microscopy images provided information about the homogeneity of the films. The atomic force microscopy (AFM) results revealed some microstructural characteristics and surface roughness. The thickness was measured by ellipsometry. The optical properties such as transmittance and reflectance (they were measured by spectrophotometry) are very sensitive to changes in the crystal lattice of the material, chemical composition and film thicknesses. Therefore, such properties are appropriate tools for verification of this process control. In general, films obtained at 0 sccm of H2 gas flow present a higher transmittance. It can be attributed to the smaller crystalline size due to a higher amount of nitrogen in the TiN lattice. The films obtained at 1 and 2 sccm of H2 gas flow have a golden appearance and XRD pattern showed peaks characteristics of TiN with higher intensity and smaller FWHM (Full Width at Half Maximum) parameter. It suggests that the hydrogen presence in the plasma makes the films more stoichiometric and becomes it more crystalline. It was observed that with higher number of holes in the lid of the cage, close to the region between the lid and the sample and the smaller diameter of the hole, the deposited film is thicker, which is justified by the most probability of plasma species reach effectively the sample and it promotes the growth of the film

Obtenção e caracterização de dióxido de estanho nanoestruturado pelo método de síntese contínua por combustão em solução

Continuous Synthesis by Solution Combustion was employed in this work aiming to obtain tin dioxide nanostructured. Basically, a precursor solution is prepared and then be atomized and sprayed into the flame, where its combustion occurs, leading to the formation of particles. This is a recent technique that shows an enormous potential in oxides deposition, mainly by the low cost of equipment and precursors employed. The tin dioxide (SnO2) nanostructured has been widely used in various applications, especially as gas sensors and varistors. In the case of sensors based on semiconducting ceramics, where surface reactions are responsible for the detection of gases, the importance of surface area and particle size is even greater. The preference for a nanostructured material is based on its significant increase in surface area compared to conventional microcrystalline powders and small particle size, which may benefit certain properties such as high electrical conductivity, high thermal stability, mechanical and chemical. In this work, were employed as precursor solution tin chloride dehydrate diluted in anhydrous ethyl alcohol. Were utilized molar ratio chloride/solvent of 0,75 with the purpose of investigate its influence in the microstructure of produced powder. The solution precursor flux was 3 mL/min. Analysis with X-ray diffraction appointed that a solution precursor with molar ratio chloride/solvent of 0,75 leads to crystalline powder with single phase and all peaks are attributed to phase SnO2. Parameters as distance from the flame with atomizer distance from the capture system with the pilot, molar ratio and solution flux doesn t affect the presence of tin dioxide in the produced powder. In the characterization of the obtained powder techniques were used as thermogravimetric (TGA) and thermodiferential analysis (DTA), particle size by laser diffraction (GDL), crystallographic analysis by X-ray diffraction (XRD), morphology by scanning electron microscopy (SEM), transmission electron microscopy (TEM), specific surface area (BET) and electrical conductivity analysis. The techniques used revealed that the SnO2 exhibits behavior of a semiconductor material, and a potentially promising material for application as varistor and sensor systems for gas

Efeito do tratamento por plasma na proliferação de fibroblastos e esterilização de membranas de quitosana

Chitosan is being studied for use as dressing due their biological properties. Aiming to expand the use in biomedical applications, chitosan membranes were modified by plasma using the following gases: nitrogen (N2), methane (CH4), argon (Ar), oxygen (O2) and hydrogen (H2). The samples were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), contact angle, surface energy and water absorption test. Biological Tests were also performed, such as: test sterilization and proliferation of fibroblasts (3T3 line). Through SEM we observed morphological changes occurring during the plasma treatment, the formation of micro and nano-sized valleys. MFA was used to analyze different roughness parameters (Ra, Rp, Rz) and surface topography. It was found that the treated samples had an increase in surface roughness and sharp peaks. Methane plasma treatment decreased the hydrophilicity of the membranes and also the rate of water absorption, while the other treatments turned the membranes hydrophilic. The sterilization was effective in all treatment times with the following gases: Ar, N2 and H2. With respect to proliferation, all treatments showed an improvement in cell proliferation increased in a range 150% to 250% compared to untreated membrane. The highlights were the treatments with Ar 60 min, O2 60 min, CH4 15 min. Observing the results of the analyzes performed in this study, it appears that there is no single parameter that influences cell proliferation, but rather a set of ideal conditions that favor cell proliferation

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Biologia reprodutiva da |Tainha, Mugil curema valencientes, 1836 (osteichthyes: mugilidade) nas águas costeiras do Rio Grande do Norte

The marine fish white mullet, Mugil curema Valenciennes, 1836 (Osteichthyes: Mugilidae) exhibits a wide geographical distribution, being common in the Brazilian coast and is an important component of the artisanal fisheries. The objective of this study was to investigate the reproductive biology of M. curema in the coastal waters of Rio Grande do Norte. Fish samples were captured on a monthly basis during August, 2008 to July, 2009. The fish specimens were numbered, weighed, measured, dissected and their gonads were removed, weighed, their sex and gonadal development were identified. The length-weight relationship was determined for males and females. The sex ratio, the size at first gonadal maturation and gonadosomatic index (GSI) were calculated and ovarian development was investigated using macroscopic and histological techniques. The fecundity, spawning type and the reproductive period of the species were determined. A total of 366 specimens (186 males and 180 females) were captured. The sex ratio was 1:1 and the females were heavier than males. The estimated values of the angular coefficient for both sexes suggest that the species has isometric growth. The size at which 50% of the population began the process of maturation was 25.9 cm of total length for grouped sex. The macroscopic characteristics of the ovaries showed four stages of development: immature, maturing, mature and spent. However, the microscopic characteristics of the ovaries showed five stages of development: immature, early maturing, late maturing, mature and spent. The development of oocytes indicated five phases: Chromatin-nucleolus (phase I), initial perinucleolar (phase II), final perinuclear (phase II), formation of vitelline vesicle or yolk (phase III), vitellogenic (phase IV) and complete vitellogenesis (phase V). The species has a prolonged spawning period, with two peaks coinciding with the rainy season.

Estratégia reprodutiva do peixe hermafrodita mussum, Synbranchus marmoratus Osteichthyes, Synbranchidae em um açude do Rio Grande do Norte, Brasil

Reproductive strategy of the hermaphrodite fish the marbled swamp eel, Synbranchus marmoratus (Bloch, 1795) (Osteichthyes: Synbranchidae) was investigated in the Marechal Dutra reservoir, Acari, Rio Grande do Norte, using fish samples captured monthly during the period of July 2010 to July 2011. The limnological parameters and rainfall were verified. The captured fish specimens were numbered, weighed, measured, dissected and their gonads and liver were removed, weighed and identified as to sex and developmental stages of gonads. The length-weight relationship was determined for grouped sex. The size of first gonadal maturation, gonadosomatic index (GSI), condition factor (K) and hepatosomatic index (HSI) were calculated. The development stages of the gonads were investigated using macroscopic and histological techniques, besides the fecundity and reproductive period. The macroscopic characteristics and the histological development of gonads confirmed the four different sexual types in the sampled population: primary males, females, intersex and secondary males. The secondary males were bigger and heavier than all the other types. This species showed a negative allometric growth with a higher increase in length than weight. The size at which 50% of the females began the process of gonadal maturation was 43.5 cm of total length, and for secondary males it was 58.5 cm. Condition factor showed two peaks in February and in April 2011. IGS indicated a reproductive period from July to September 2010 and was negatively correlated with the condition factor and rainfall. IGS showed a negative correlation when compared with the condition factor and the rainy season. HSI was highest in February ad lowest in December. The reproductive period of this species occurs between the end of the rainy season and the beginning of the dry season. S. marmoratus presents a seasonal reproductive strategy which optimizes its reproductive success under the semiarid climatic conditions

Efetividade do clareamento dentário com peróxido de carbamida a 10% e avaliação dos efeitos adversos sobre o esmalte dentário

The aim of the present study was to assess the effectiveness and adverse effects on dental enamel caused by nightguard vital bleaching with 10% carbamide peroxide. This was accomplished through the interaction of researchers from different areas such as dentistry, materials engineering and physics. Fifty volunteers took part in the doubleblind randomized controlled clinical trial. They were allocated to an experimental group that used Opalescence PF 10% (OPA) and a control group that used a placebo gel (PLA). Fragments of human dental enamel from the vestibular surface of healthy premolars, extracted for orthodontic reasons, were fixed to the vestibular surface of the first upper molars of the volunteers for in situ observation. Bleaching was performed at night for 21 days. The observation periods included Baseline (BL), T0 (21 days), T30 (30 days after treatment) and T180 (180 days after treatment, only for the OPA group). Tooth color was assessed by comparing it with the Vita® scale and by the degree of satisfaction expressed by the volunteer. We also assessed adverse clinical effects, dental sensitivity and gingival bleeding. The study of adverse effects on enamel was conducted in vivo and in situ, using the DIAGNOdent® laser fluorescence device to detect mineral loss. Scanning electron microscopy (SEM) was used to check for superficial morphological alterations, energy dispersive spectrophotometry (EDS) to semiquantitatively assess chemical composition using the Ca/P ratio, and the x-ray diffraction (XRD) technique to observe alterations in enamel microstructure. The results showed that nightguard vital bleaching with 10% carbamide peroxide was effective in 96% of the cases, versus 8% for the PLA group. Dental sensitivity was present in 36% (9/25) of the cases. There was no significant association between gingival bleeding and the type of gel used (p = 1.00). In vivo laser fluorescence analysis showed no difference in values for the control group, whereas in the OPA group there was a statistically significant difference between baseline values in relation to the subsequent periods (p<0.01), with lower mean values for post-bleaching times. There was a significant difference between the groups for times T0 and T30. Micrographic analysis showed no enamel surface alterations related to the treatment performed. No significant alteration in Ca/P ratio was observed in the OPA group (p = 0.624) or in the PLA group (p = 0.462) for each of the observation periods, nor between the groups studied (p=0.102). The XRD pattern for both groups showed the presence of three-phase Hydroxyapatite according to JCPDS files (9-0432[Ca5(PO4)3(OH)], 18-0303[Ca3(PO4)2.xH2O] and 25-0166[Ca5(PO4)3(OH, Cl, F)]). No other peak associated to other phases was found, independent of the group analyzed, which reveals there was no disappearance, nucleation or phase transformation. Neither was there any alteration in peak pattern location. With the methodology and protocol used in this study, nightguard vital bleaching with 10% carbamide peroxide proved to be an effective and safe procedure for dental enamel

Caracterização de superfícies de titânio modificado por oxidação à plasma

Recent years have seen a significant growth in surface modifications in titanium implants, resulting in shorter healing times in regions with low bone density. Among the different techniques, subtraction by chemical agents to increase oxidation has been applied for surface treatment of dental implants. However, this technique is generally unable to remove undesirable oxides, formed spontaneously during machining of titanium parts, raising costs due to additional decontamination stages. In order to solve this problem, the present study used plasma as an energy source to both remove these oxides and oxidize the titanium surface. In this respect, Ti disks were treated by hollow cathode discharge, using a variable DC power supply and vacuum system. Samples were previously submitted to a cleaning process using an atmosphere of Ar, H2 and a mixture of both, for 20 and 60 min. The most efficient cleaning condition was used for oxidation in a mixture of argon (60%) and oxygen (40%) until reaching a pressure of 2.2 mbar for 60 min at 500°C. Surfaces were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM), adhesion and cell proliferation. SEM showed less cell spreading and a larger number of projections orfilopodia in the treated samples compared to the control sample. AFM revealed surface defects in the treated samples, with varied geometry between peaks and valleys. Biological assays showed no significant difference in cell adhesion between treated surfaces and the control. With respect to cell proliferation, the treated surface exhibited improved performance when compared to the control sample. We concluded that the process was efficient in removing primary oxides as well as in oxidizing titanium surfaces