Uma intervenção educativa para profissionais de saúde na prevenção de pneumonia associada à ventilação mecânica

Quasi-experimental study, prospective with quantitative approach, performed at the Hospital do Coração in Natal, aimed at verified the existence of difference between the care given by health professionals to the patients under mechanical ventilation (MV) in the Intensive Care Unit, before and after an educative intervention. The population was of 31 professionals, with data collected between november 05 of 2007 to march 27 of 2008. The results show a yong population, female gender, middle level of education, nursing technique, working between 05 and 09 years on nursing profession, and 01 to 04 years on Intensive Care Unit; almost all, never had an kind of training over prevent pneumonia associated to mechanical ventilation; from those that had training, occur on the work place with duration from 12 to 24 hours. About endotracheal intubation, the cuff was tested with a sterilized syringe had a positive change after a educative intervention, increased from 75,0% to 100,0%; the sterile guide was used on 75,0% before and 100,0% after an educative intervention. Regarding endotracheal suction procedure, was not informed to the patient on 72,7% before, however was informed on 56,7% after; the hands was not previously washed 68,5% before, however was 63,3% after the procedure; mask was used on 74,2 % opportunities before and 76,7% after; the aspiration catheter had adequated size on 98,9% observation before and 100,0% after; the gaze was sterilized on 95,7% before and 100,0% after; the ventilator was connected to the patient during the aspiration intervals on 94,4% observation before and 100,0% after; the ambu bag was clean and protected on 76,1% before and 85,7% after; the aspiration catheter was discarded after be used on 98,9% before and 100,0% after; FIO2 was turned to the begging value on 32,9% observation before and 12,0% after; before the procedure 71,9% professions washed their hands and 73,3% after; before, notes of aspiration results were performed on 70,8% observation and 86,7% after. Regarding devices used on respiratory tract, aspirator flasks were not swapped on 84,6% observations before and 71,0% after; daily látex extention change was not performed on 93,6% observation before and 87,1% after; the ambu bag change was not performed on 50,0% observation before even if was duty or unprotected and on 75,8% opportunities was changed, after; nebulization was not prepared with sterile fluids or manipulated aseptically on 65,2% observation before, perhaps was on 71,7% after; before nebulizers were not changed on 65,2% observations, perhaps were on 60,9% after. Concerning ventilator breathing circuits, condense fluids cumulated on circuits were removed on 55,0% opportunities before, and 64,0% after; moisturizer was not filled with sterile water when already had small amount of liquid inside on 78,4% observations before, and 90,2% after; MV circuits were changed on 97,0% observations on presence of visible duty or when presents some kind of failure, before and 98,4% after. About body position, on 51,3% observations the decubitus position change were done before and 78,2% after; fowler position was maitened on 95,5% observations before and 98,2% after; Regarding respiratory physiotherapy, enteral diet was not interrupted before respiratory physiotherapy on 94,9% before and 90,0% after; respiratory physiotherapy devices were not disinfected or sterile on 69,6% observations before but they re on 60,0% after; before the cateter was not tested before introduction enteral diet or medications on 100,0% but after was done on 15,2%. About enteral feeding, intestine motility and measure of stomach contents were not done on 100,0% observations before, but was 15,2% after. We conclude that 05 of 07 valuated procedures in relation to MV, had a significant improvement on quality of care given after educative intervention, when compared before intervention

Determinação dos fatores neuroepidemiológicos das crises convulsivas em recém nascidos internados em unidades de terapia intensiva

O objetivo do nosso projeto foi determinar as características dos recém nascidos com crises convulsivas internados em unidades de terapia intensiva. Foi realizada uma pesquisa multicêntrica, observacional, prospectiva, cuja população alvo foi os recém nascidos com crises convulsivas internados em unidades de terapia intensiva, envolvendo equipe multidisciplinar constituída por neurologista infantil, neonatologistas, intensivistas pediátricos, enfermeiros, técnicos de enfermagem e fisioterapêutas. As crises foram definidas pelo critério clínico, com classificação de Volpe. Variáveis relacionadas à gestação, ao parto, características dos recém nascidos, aspectos das crises convulsivas e mortalidade foram analisadas. Estatística: descritiva (freqüências, medidas de tendência central e dispersão) e análise (teste de probabilidade, teste de risco e de acurácia). Comparamos as crises clínicas entre os recém nascidos de termo e pretermo e observamos diferenças com significância estatística na idade de início das crises, mais tardia nos prematuros, na etiologia predominante: hemorragia peri-intraventricular no prematuro e encefalopatia hipóxico-isquêmica no termo e tipo clínico de crise, clônica no pretermo e sutil no termo. Os testes de acurácia utilizados para determinar se o tipo clínico de crise convulsiva é predictor da etiologia da mesma não revelaram resultados positivos. Quanto às características associadas à mortalidade de prematuros com crise convulsiva, observamos associação entre ventilação mecânica e pneumonia com a mortalidade. Existem diferenças clínicas quando comparamos os recém nascidos pretermo e de termo com crises convulsivas, confirmando dados da literatura

Gasto com a internação de idosos em unidades de terapia intensiva

Introduction: Population aging in Brazil underscores the need to discuss the proper management of the budget allocated in health field, especially in the sectors of high complexity, where coexist costly procedures, limited resources and the need for cost containment. In the other hand, demand is growing in a way directly proportional to the increase in the number of elderly in country. Objective: In this way, this research had as main objective to analyze the costs resulting from the admission of elderly in intensive care units (ICU) and its associated factors. Methods: This is a cross-sectional study with a quantitative approach and featured as a descriptive and exploratory research. Data were collected from medical records of elderly hospitalized in ICU from a brazilian city called Natal-RN, between november first, 2013 and january, 31 of 2014. The variables collected relate to the socio demographic profile, morbidity framework and characterization of hospitalization. The dependent variable was categorized by quartile 75 in high and low expense of hospitalization and submitted to chi-square test with the independent variables of the survey. Associations with p value <0.20 in the bivariate analysis were submitted to the technique of multiple logistic regression. We opted for the construction of three regression models from the above algorithm: general regression model, composed by all 493 hospitalizations in the study, other made with 181 individuals admitted in health public system (SUS) and a third one related to 312 cases from private service in health area. Results: In the general regression model, the variables respiratory diseases, hospitalizations in the private system, disoriented patient and previous stroke were associated with greater probability of high spending in the ICU. In the other hand, in SUS kind of hospitalizations, this probability was associated with disoriented patient, 80 years old or more, sepsis and admission for clinical reason. In the cases from the private network health, the high expenditure was associated with respiratory disease, mechanical ventilation, hospitalization for clinical reason and disoriented patients. Conclusion: The increased expenditure on hospitalization of elderly in intensive care depends on the clinical conditions of individuals. This highlights the importance of avoiding hospitalizations due to diseases sensitive to primary care by health preventive actions and providing comprehensive care to the elderly. In addition, obtaining different explanatory models, according to kind hospital funding, demonstrates the importance of the organization in health services related to composition of costs of hospitalization among the elderly. Another question founded was the need that to improve the funding, we must use rationally the available resources by avoiding unnecessary hospitalizations of elderly people in the extremes of severity. On this kind of precarious funding, ICU hospitalization of elderly non-critical or in a terminal state can compromise the quality of services provided to those who really need intensive care.

Gravidade do olho seco em pacientes internados em unidade de terapia intensiva: análise de conceito e construção de definições

Dry eye syndrome is a multifactorial disease of the tear film, resulting from the instability of the lacrimal functional unit that produces volume change, up or tear distribution. In patients in intensive care the cause is enhanced due to various risk factors, such as mechanical ventilation, sedation, lagophthalmos, low temperatures, among others. The study's purpose is to build an assessment tool of Dry Eye Severity in patients in intensive care units based on the systematization of nursing care and their classification systems. The aim of this study is to build an assessment tool of Dry Eye Severity in hospitalized patients in Care Unit Intensiva.Trata is a methodological study conducted in three stages, namely: context analysis, concept analysis, construction of operational definitions and magnitudes of nursing outcome. For the first step we used the methodological framework for Hinds, Chaves and Cypress (1992). For the second step we used the model of Walker and Avant and an integrative review Whitemore seconds, Knalf (2005). This step enabled the identification of the concept of attributes, background and consequent ground and the construction of the settings for the result of nursing severity of dry eye. For the construction of settings and operational magnitudes, it was used Psicometria proposed by Pasquali (1999). As a result of context analysis, visualized from the reflection that the matter should be discussed and that nursing needs to pay attention to the problem of eye injury, so minimizing strategies are created this event with a high prevalence. With the integrative review were located from the crosses 19 853 titles, selected 215, and from the abstracts 96 articles were read in full. From reading 10 were excluded culminating in the sample of 86 articles that were used to analyze the concept and construction of settings. Selected articles were found in greater numbers in the Scopus database (55.82%), performed in the United States (39.53%), and published mainly in the last five years (48.82). Regarding the concept of analysis were identified as antecedents: age, lagophthalmos, environmental factors, medication use, systemic diseases, mechanical ventilation and ophthalmic surgery. As attributes: TBUT <10s, Schimer I test <5 mm in Schimer II test <10mm, reduced osmolarity. As consequential: the ocular surface damage, ocular discomfort, visual instability. The settings were built and added indicators such as: decreased blink mechanism and eyestrain.

Avaliação das pressões respiratórias máximas em crianças e adolescentes da grande Natal: elaboração de uma equação preditiva

The human respiratory system was so designed that would allow efficient ventilation, regardless of variations in the external environment that may hinder the act of breathing, such an act involves dozens of variables, among them we find the respiratory depression, which is nothing more than respiratory muscle strength. The pressures are widely used in several cases: Neuro-muscular; evolution of pulmonary dysfunction and a predictor for discontinuation of mechanical ventilation. Therefore it was proposed to carry out evaluations of these respiratory pressures for children and adolescents aged 10 to 16 years and propose a predictive equation that involves the anthropometric variables age (A, years), body mass (BM, kilograms) and height (H, meters) with maximal respiratory pressures (maximum inspiratory and expiratory pressure). Evaluations were performed in this age group of students in public and private schools of the Grande Natal , measurements were performed using the analogue manometer, were children and adolescents and their parents gave informed consent. 517 samples were taken, and 250 for males (M), 255 for females (F) and 12 were excluded according to our exclusion criteria. The sample was subdivided into three age groups (10-11, 12-13 and 14 to 16 years old). It was found through the student s t test (p ≤ 0.05) for all variables studied, children and male adolescents had higher means than females, except for the MC. For the correlation between the variables found significant correlation (p <0.05) among all the variables when analyzed as pairs except between MIP and height for females. The development of predictive equations (for p ≤ 0.05) based on three types of strategies adopted were restricted to two association between anthropometric variables isolated, resulting in: for males: MIP = -32.29 + (-2.11*A) + (-0.52*BM), MIP = 9.99 + (-0.36*BM) + (-49.40*H); MEP = 18.54 + 3.53*A + 0, 42*BM, MEP = -33.37 + 2.78*A + 52.18* H, MEP = -17.39 + 0.33*BM + 55.04*H; and, for females we find: MEP = 24.32 + 2.59 * A + 0.24*BM

Como vão se formando os professores em física e química: embates entre o ser, o ter e o fazer na formação de licenciandos da UFRN sob a perspectiva da teoria das representações sociais

The purpose of this work is to approach and understand the Social Representations (SR) (MOSCOVICI, 2003) about Physics and Chemistry from people who are major in these courses, as well as their Social Representations about teaching . We took as principle that approaching these representations it would be possible to relate their symbolic contents, in order to show how people who are following the first segments of bachelor degree courses in Physics and Chemistry become teachers, taking into account a psychosocial view. Two source of data was used during this research: Free-association Technique FA (ABRIC, 1994); and Multiple Classification Procedure (MCP) (ROAZZI, 1995). The analytical treatment of the collected data from FA was done according to the proposition of Grize, Vergés and Silem (1987 apud ABRIC, 1994, p. 66). MCP data were analyzed through MSA (Multidimensional Scalogram Analysis) and SSA (Singular Spectrum Analysis) methods associated with the Facet Theory (BILSKY, 2003). The discourses of MCP discussing groups at the moment of explanations were studied by Content Analysis as it was proposed by Bardin (1977) and Franco (2005). Indicative of an approach to the relations with knowledge (CHARLOT, 2000), the connections which aroused from the analyses showed that the group of future majors in Physics thought that this scientific field was based on a rationalist conception, influencing the idealization sense of the phenomena to be explained by Physics. Thus, Physics as school content started to require the student of the fundamental and high school to think abstractly as a cognitive skill of learning. The identifying elements observed in the relations between SR about Physics and Teaching aroused from the antagonism between future majors and their teacher, as well as from the speculation between their fundamental and high school students and themselves, mainly when they had to face the act of teaching due to the obstacles imposed by the own educational system, and by the weakness of the initial preparation. The group of future majors in Chemistry, through its discourses, showed these relations when they conceived empiricist Chemistry and said that teaching was the way of transmission of this knowledge, and didactics of Chemistry teaching was the direction to learning through pedagogic methods in order to lead the students to discoveries. The psychosocial contents which were built and showed from the symbolic relations in the studied SR achieved the relation of identity. This relation revealed identifying elements for these people, resulting from the traffic between their condition as students of Chemistry, and as teachers regarding their work, what placed the current relational contents in the teaching space, named as Knowledge changing and Adaptability . In order to study emerging questions in the discussing environment about formation and teaching professionalization, we focused the psychosocial view on this traffic and managed to observe epistemological practical and pedagogic obstacles that limited a configuration of the teaching work as a professional activity, especially from the particular conditions which led the relations of senses to Physics , Chemistry and Teaching ; and Chemistry and Physics as it was seen in this research. Generally speaking, we noted that these obstacles can denounce such obstacles concerning to the pedagogic doings which mainly impair the learning process of fundamental and high school students

Qualidade de vida de pessoas com úlcera venosa: associação dos aspectos sociodemográficos, de saúde, assistência e clínicos da lesão

Venous ulcer (VU) is a lower limbs injury resulting from inadequate return of venous blood in feet or legs. Although it is not a deadly disease, it causes chronic wounds, which seriously undermine patients´ quality of life (QOL) and sometimes leads to drastic family, social, economic and psychological changes. In this sense, there are several aspects that may influence the venous ulcers patients´ QOL. The study´s objective aimed on the association of socio-demographic and health, health care and clinical injury on UV patients‟ QOL. Analytical studies, which consider the complexity of factors involved in changes in UV patients‟ QOL has a cross-sectional and quantitative approach. The HUOL Ethics Committee approved this project (n.279/09). The collection of data lasted a period of 3 months in 2010 and it took place at the clinic of Angiology at Hospital Universitário Onofre Lopes (HUOL). The data sample consisted of 60 patients treated by UV angiologists in the HUOL Surgical Clinic. The results were analyzed with SPSS 15.0 by descriptive and inferential statistics. The study was based on UV patients that were predominantly female, average age of 61.4 years, that had low education level and low family income, with occupations requiring long periods of standing or sitting, but mostly retired, unemployed or laid off due to the disease and/or due to chronic diseases associated with the UV. The study took also into consideration patients that used inappropriate products, that were improperly treated by a professional caregiver, that lacked of adequate guidance and compression therapy, that performed no lifting of the lower limbs and regular exercise, that the time of injury were greater than or equal to six months, that were missing specific laboratory tests. The study‟s reference were on recurrent lesions, medium to large lesions area, bed of the lesion (injuries) with fibrin and/or necrosis, with amount of exudate with medium to large, odorless and no signs of infection, with tissue loss between 1st and 2nd degree, without collecting swab or biopsy and with pain. In general, QOL of researched individuals were considered low, the maximum score was 69 points, which the areas that were mostly influenced were the total scores of QOL functional capacity (0.021), emotional (0.000) and social functioning (0.080). Of the 60 individuals, 53.3% had scores between 40 and 69 points in SF-36, and they had the best scores in sociodemographic and health variables (ρ = 0.049). In respect to the assistance and injury characteristics, patients who scored between 40 and 69 points in SF-36 had better scores on these characteristics. By combining the socio-demographic variables, health, and handling characteristics of the injury, we observed a significant difference (ρ = 0.032) when linking them with the QOL total scores. When analyzing separately the domains of the SF-36 scores on the quality of life, we find that the areas that showed statistical significance were functional ability (ρ = 0.035), appearance (ρ = 0.019), emotional (ρ = 0.000), and mental health (ρ = 0.050). Among the socio-demographic characteristics studied, gender and marital status contributed more to the reduction of QOL and among the variables of assistance and the injury, orientation, reference and area of UV contributed the most. By analyzing these five variables all together in accordance with the overall score obtained in the quality of life, we found a significant correlation (ρ = 0.002); with 6.23 times more chances of patients have better QOL in the presence of these five positive factors. By conducting the Mann Whitney U test between all the five demographic variables, health, and clinical care, we found that this combination also proved to be significant (ρ = 0.006). Therefore, patients with these five variables positive tend to have a better QOL. Based on these results, we reject the null hypothesis (H0) and accept the alternative hypothesis (H1) proposed in this study because we noted that the QOL of patients with UV is associated with sociodemographic and health, health care and clinical aspects of the injury

Carga de trabalho de enfermagem e infecções relacionadas à assistência à saúde na unidade de terapia intensiva

In recent decades, the search for quality care has been widely discussed by the institutions and health professionals. In this context, it is the nurse coordinator of the process of providing nursing staff, reflecting the commitment to quality of care. In this process, it is the appearance of Infections Related to health care and its potential association with the workload in nursing as a valuable indicator of quality of care. Thus, this research contributes to studies to characterize the demand of nursing work to promote a safe healthcare practice. This study aimed to identify the association of nursing workload with the number of cases of Ventilator-Associated Pneumonia, urinary tract infection and central venous catheter infection in the intensive care unit. This is a quantitative research approach, descriptive, cross-sectional and prospective, held at Unimed Hospital in Natal-RN. The study population consisted of all patients treated in the Intensive Care Unit, Hospital for a period of 90 consecutive days in 2011. The convenience sample was compostapelos patients admitted to the ICU during the period of data collection, a total sample of 286 patients. To perform the data analysis software were used: Statistica 6.0, SPPS (Statistical Package for Social Sciences) version 17.0 (2004) and Excel 2007. In the descriptive analysis, we used Measures of Central Tendency and Measures of Dispersion or Variability and the use of nonparametric tests. Of the 286 patients, 88 were from the ICU and 198 ICU II II. Males predominated in the ICU I (51.1%) and female ICU II (57.6%) patients in the ICU I were aged 61-80 years (39.8%) followed by greater than 80 years (39.8%). In the ICU II, most of the patients were aged 61-80 years (38.9%) and then from 41 to 60 years (24.2%). In relation to the class of TISS inlet predominant class II in the two ICUs (59.1%), followed by Class III also in the two units (34.6%). Most patients (70.6%) out of the ICUs belonging to class II TISS. In the ICU I, the average number of forms of the TISS 28 was 6, has in ICU II this value drops to 3.2 forms. The overall mean was 19.9 TISS points in ICU patients I and ICU II.the 17 points in the average hours required to provide adequate nursing care to patients in the ICU I found that is 10 , 7 hours, and the ICU II 9.2 hours. It was found that the time provided by the nursing staff were higher in ICU II, with an average of 19 hours available for nurses in this sector. In the ICU I, which showed higher need of available hours, it was found that the mean value of 12.7 available hours. It was found that only 2.4% of patients had these units Ventilator-Associated Pneumonia, 1.0% were infected central venous catheter and 1.4% of patients had urinary tract infection. Infection associated with health care occurs, on average, on the tenth day of hospitalization. In the ICU II, this average value extends to the twelfth day with an excess of 2.7 hours of nursing care while in ICU I value decays to the ninth day of hospitalization with a deficiency of 12-hour assistance. It is concluded that patients generally showed a need for classification of semi-intensive care and has been assisted in their need to load. As for his association with the Related Infections Health will assist this analysis could not be performed due to the small number of notifications in this period. It is suggested further study how other factors related to infections me a longer period of analysis

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Otimização e análise mecânica de pastas geopoliméricas para uso em poços sujeitos à injeção cíclica de vapor

Oil wells subjected to cyclic steam injection present important challenges for the development of well cementing systems, mainly due to tensile stresses caused by thermal gradients during its useful life. Cement sheath failures in wells using conventional high compressive strength systems lead to the use of cement systems that are more flexible and/or ductile, with emphasis on Portland cement systems with latex addition. Recent research efforts have presented geopolymeric systems as alternatives. These cementing systems are based on alkaline activation of amorphous aluminosilicates such as metakaolin or fly ash and display advantageous properties such as high compressive strength, fast setting and thermal stability. Basic geopolymeric formulations can be found in the literature, which meet basic oil industry specifications such as rheology, compressive strength and thickening time. In this work, new geopolymeric formulations were developed, based on metakaolin, potassium silicate, potassium hydroxide, silica fume and mineral fiber, using the state of the art in chemical composition, mixture modeling and additivation to optimize the most relevant properties for oil well cementing. Starting from molar ratios considered ideal in the literature (SiO2/Al2O3 = 3.8 e K2O/Al2O3 = 1.0), a study of dry mixtures was performed,based on the compressive packing model, resulting in an optimal volume of 6% for the added solid material. This material (silica fume and mineral fiber) works both as an additional silica source (in the case of silica fume) and as mechanical reinforcement, especially in the case of mineral fiber, which incremented the tensile strength. The first triaxial mechanical study of this class of materials was performed. For comparison, a mechanical study of conventional latex-based cementing systems was also carried out. Regardless of differences in the failure mode (brittle for geopolymers, ductile for latex-based systems), the superior uniaxial compressive strength (37 MPa for the geopolymeric slurry P5 versus 18 MPa for the conventional slurry P2), similar triaxial behavior (friction angle 21° for P5 and P2) and lower stifness (in the elastic region 5.1 GPa for P5 versus 6.8 GPa for P2) of the geopolymeric systems allowed them to withstand a similar amount of mechanical energy (155 kJ/m3 for P5 versus 208 kJ/m3 for P2), noting that geopolymers work in the elastic regime, without the microcracking present in the case of latex-based systems. Therefore, the geopolymers studied on this work must be designed for application in the elastic region to avoid brittle failure. Finally, the tensile strength of geopolymers is originally poor (1.3 MPa for the geopolymeric slurry P3) due to its brittle structure. However, after additivation with mineral fiber, the tensile strength became equivalent to that of latex-based systems (2.3 MPa for P5 and 2.1 MPa for P2). The technical viability of conventional and proposed formulations was evaluated for the whole well life, including stresses due to cyclic steam injection. This analysis was performed using finite element-based simulation software. It was verified that conventional slurries are viable up to 204ºF (400ºC) and geopolymeric slurries are viable above 500ºF (260ºC)

Análise mecânica e microestrutural das ligas de cobalto-cromo de uso odontológico após sucessivas refundições

The cobalt-chromium alloy is extensively used in the Odontology for the confection of metallic scaffolding in partial removable denture. During the last few years, it has been reported an increasing number of premature imperfections, with a few months of prosthesis use. The manufacture of these components is made in prosthetic laboratories and normally involves recasting, using parts of casting alloy and parts of virgin alloy. Therefore, the objective of the present study was to analyze the mechanical properties of a commercial cobalt-chromium alloy of odontological use after successive recasting, searching information to guide the dental prosthesis laboratories in the correct manipulation of the cobalt-chromium alloy in the process of casting and the possible limits of recasting in the mechanical properties of this material. Seven sample groups were confectioned, each one containing five test bodies, divided in the following way: G1: casting only with virgin alloy; G2: casting with 50% of the alloy of the G1 + 50% of virgin alloy; G3: casting with 50% of the alloy of the G2 + 50% of virgin alloy; G4: casting with 50% of the alloy of the G3 + 50% of virgin alloy; G5: 50% of alloy of the G4 + 50% of virgin alloy; G6: 50% of alloy of the G5 + 50% of virgin alloy and finally the G7, only with recasting alloy. The modifications in the mechanical behavior of the alloy were evaluated. Moreover, it was carried the micro structural characterization of the material by optic and electronic scanning microscopy, and X ray diffraction.and fluorescence looking into the correlatation of the mechanical alterations with structural modifications of the material caused by successive recasting process. Generally the results showed alterations in the fracture energy of the alloy after successive recasting, resulting mainly of the increasing presence of pores and large voids, characteristic of the casting material. Thus, the interpretation of the results showed that the material did not reveal significant differences with respect to the tensile strength or elastic limit, as a function of successive recasting. The elastic modulus increased from the third recasting cycle on, indicating that the material can be recast only twice. The fracture energy of the material decreased, as the number of recasting cycles increased. With respect to the microhardness, the statistical analyses showedno significant differences. Electronic scanning microscopy revealed the presence of imperfections and defects, resulting of the recasting process. X ray diffraction and fluorescence did not show alterations in the composition of the alloy or the formation of crystalline phases between the analyzed groups. The optical micrographs showed an increasing number of voids and porosity as the material was recast. Therefore, the general conclusion of this study is that the successive recasting of of Co-Cr alloys affects the mechanical properties of the material, consequently leading to the failure of the prosthetic work. Based on the results, the best recommendadition is that the use of the material should be limited to two recasting cycles

Ventilação e prescrições urbanísticas: uma aplicação simulada para a Orla da Praia do Meio em Natal/RN

This work analyses a study on natural ventilation and its relation to the urban legislation versus the building types in an urban fraction of coastal area of Praia do Meio in the city of Natal/RN, approaching the type or types of land use most appropriate to this limited urban fraction. The objective of this study is to analyse the effects of the present legislation as well as the types of buildings in this area on the natural ventilation. This urban fraction was selected because it is one of the sites from where the wind flows into the city of Natal. This research is based on the hypothesis stating that the reduction on the porosity of the urban soil (decrease in the set back/boundary clearance), and an increase in the form (height of the buildings) rise the level of the ventilation gradient, consequently causing a reduction on the wind speed at the lowest part of the buildings. Three-dimensional computational models were used to produce the modes of occupation allowed in the urban fraction within the area under study. A Computational Fluid Dynamics (CFD) software was also used to analyse the modes of land occupation. Following simulation, a statistical assessment was carried out for validation of the hypothesis. It was concluded that the reduction in the soil porosity as a consequence of the rates that defined the minimum boundary clearance between the building and the boundary of the plot (and consequently the set back), as well as the increase in the building form (height of the buildings) caused a reduction in the wind speed, thus creating heat islands

Análise de componentes arquitetônicos para potencialização da ventilação natural com ênfase em captadores de vento

The building envelope is the principal mean of interaction between indoors and environment, with direct influence on thermal and energy performance of the building. By intervening in the envelope, with the proposal of specific architectural elements, it is possible to promote the use of passive strategies of conditioning, such as natural ventilation. The cross ventilation is recommended by the NBR 15220-3 as the bioclimatic main strategy for the hot and humid climate of Natal/RN, offering among other benefits, the thermal comfort of occupants. The analysis tools of natural ventilation, on the other hand, cover a variety of techniques, from the simplified calculation methods to computer fluid dynamics, whose limitations are discussed in several papers, but without detailing the problems encountered. In this sense, the present study aims to evaluate the potential of wind catchers, envelope elements used to increase natural ventilation in the building, through CFD simplified simulation. Moreover, it seeks to quantify the limitations encountered during the analysis. For this, the procedure adopted to evaluate the elements implementation and efficiency was the CFD simulation, abbreviation for Computer Fluid Dynamics, with the software DesignBuilder CFD. It was defined a base case, where wind catchers were added with various settings, to compare them with each other and appreciate the differences in flows and air speeds encountered. Initially there has been done sensitivity tests for familiarization with the software and observe simulation patterns, mapping the settings used and simulation time for each case simulated. The results show the limitations encountered during the simulation process, as well as an overview of the efficiency and potential of wind catchers, with the increase of ventilation with the use of catchers, differences in air flow patterns and significant increase in air speeds indoors, besides changes found due to different element geometries. It is considered that the software used can help designers during preliminary analysis in the early stages of design

Layout, conforto e satisfação dos usuários em escritórios: uma avaliação pós-ocupação no edifício da sede administrativa do INPE-CRN

This research aimed to identify the link between the layout of workspaces in offices and the design strategies for environmental comfort. Strategies surveyed were focused on the thermal, visual and luminic comfort. In this research, visual comfort is related to issues of visual integration within and between the interior and exterior of the building. This is a case study conducted at the administrative headquarters of Centro Regional Nordeste do Instituto de Pesquisas Espaciais (INPE-CRN), located in Natal/RN. The methodological strategy used was the Post-Occupancy Evaluation, which combined the survey data on the building (layout of workspaces, bioclimatic strategies adopted in the design, use of these strategies) with some techniques aimed at acquiring qualitative information related to users. The workspace layout is primordial to satisfaction and productivity of workers. Issues such as concentration, communication, privacy, personal identity, density and space efficiency, barriers (access, visual and even ventilation and lighting), among others, are associated with the layout. The environmental comfort is one of the essential elements to maintaining life quality in workplace. Moreover, it is an important factor in user`s perception of the space in which he or she are inserted. Both layout and environmental comfort issues should be collected and analyzed in the establishment phase of the programming step. That way, it is possible to get adequate answers to these questions in subsequent project phases. It was found that changes in the program that occurred over time, especially concerning persons (number and characteristics), resulted in changes in layout, generating high density and inflexible environments. It turns difficult to adjust the furniture to the occupants` requirement, including comfort needs. However, the presence of strategies for environmental quality provides comfort to spaces, ensuring that, even in situations not considered optimal, users perceive the environment in a positive way. It was found that the relationship between environmental comfort and layout takes the following forms: in changing the perception of comfort, depending on the layout of the arrangements; adjustments in layout, due to needs for comfort; and the elevation of user satisfaction and environmental quality due to the presence of strategies comfort even in situations of inadequate layout