33 resultados para Molded dishes (Cooking)
Resumo:
This research consists in studying the influence of the various type of construction systems of roofs with their energy efficiency as well as on the cost benefit for the commercial buildings on the temperatures condition of the city of Natal/RN. The main goal of this research is to analyze the cost benefit of the construction systems of roofs available on the market, taking into consideration the energy efficiency of the commercial buildings artificially air conditioned in order to be used by the projectors and to be adequated to the temperatures condition of the city of Natal/RN. The method of valuation of the cost benefit of roof systems consists in six steps: Features and simulation of the reference building; Analyze of sensitivity; Analyzes, features and simulation of alternatives of roof construction systems; Analyze of the cost of implementation; Analyze of the benefits of the alternatives comparing to the base case; And finally the analyze of the cost benefit. The model type chosen as reference was stores with pre molded buildings and system of roof with fiber ciment and ceiling . The thermal results showed the influence of the roof system on the energy efficiency of the building. The Final results of the simulations of the alternatives comes to a conclusion that the absortance is the variable that presents the best cost benefit relation and the reduction on the thermal transmittance still has limitations because of the high cost
Resumo:
he present model of agriculture is based on intensive use of industrial inputs, due to its rapid response, but it brings harmful consequences to the environment, and it is necessary the use of modern inputs. And an alternative is the use of rock biofertilizers in agriculture, a product easy to use, with higher residual effect and does not harm the environment. The objective of study was to evaluate the inoculation and co-inoculation of different microorganisms in the solubilization of rock phosphate and potash ground microbial evaluating the best performance in the production of biofertilizers comparing with rocks pure in soil chemical properties and, verify effect of inoculation of the bacterium Paenibacillus polymyxa in the absorption of minerals dissolved in the development of cowpea (Vigna unguiculata [L.] Walp.). The first bioassay was conducted in Laboratory (UFRN) for 72 days in Petri dishes, where the rock powder was increased by 10% and sulfur co-inoculated and inoculated with bacterial suspension of Paenibacillus polymyxa grown in medium tryptone soy broth, Ralstonia solanacearum in medium Kelman, Cromobacterium violaceum in medium Luria-Bertani and Acidithiobacillus thiooxidans in medium Tuovinen and Kelly,and fungi Trichoderma humatum and Penicillium fellutanum in malt extract. Every 12 days, samples were removed in order to build up the release curve of minerals. The second bioassay was conducted in a greenhouse of the Agricultural Research Corporation of Rio Grande do Norte in experimental delineation in randomized block designs, was used 10 kg of an Yellow Argissolo Dystrophic per pot with the addition of treatments super phosphate simple (SS), potassium chloride (KCl), pure rock, biofertilizers in doses 40, 70, 100 and 200% of the recommendation for SS and KCl, and a control, or not inoculated with bacteria P. polymyxa. Were used seeds of cowpea BRS Potiguar and co-inoculated with the bacterial suspension of Bradyrhizobium japonicum and P. polymyxa. The first crop was harvested 45 days after planting, were evaluated in the dry matter (ADM), macronutrients (N, P, K, Ca, Mg) and micronutrients (Zn, Fe, Mn) in ADM. And the second at 75 days assessing levels of macro end micronutrients in plants and soil, and the maximum adsorption capacity of P in soil. The results showed synergism in co-inoculations with P. polymyxa+R. solanacearum and, P. polymyxa+C. violaceum solubilizations providing higher P and K, respectively, and better solubilization time at 36 days. The pH was lower in biofertilizers higher doses, but there was better with their addition to P at the highest dose. Significant reduction of maximum adsorption capacity of phosphorus with increasing dose of biofertilizer. For K and Ca was better with SS+KCl, and Mg to pure rock. There was an effect of fertilization on the absorption, with better results for P, K and ADM with SS+KCL, and N, Ca and Mg for biofertilizers. Generally, the P. polymyxa not influence the absorption of the elements in the plant. In treatments with the uninoculated P. polymyxa chemical fertilizer had an average significantly higher for weight and number of grains. And in the presence of the bacteria, biofertilizers and chemical fertilizers had positive values in relation to rock and control. The data show that the rocks and biofertilizers could meet the need of nutrients the plants revealed as potential for sustainable agriculture
Resumo:
This work addresses the production of lightweight concrete building elements, such as plates, prefabricated slabs for pre-molded and panels of fencing, presenting a singular concrete: the Lightweight Concrete, with special properties such low density and good strength, by means of the joint use of industrial waste of thermosetting unsaturated polyesters and biodegradable foaming agent, named Polymeric Lightweight Concrete. This study covered various features of the materials used in the composition of the Polymeric Lightweight Concrete, using a planning of factorial design 23, aiming at studying of the strength, production, dosage processes, characterization of mechanical properties and microstructural analysis of the transition zone between the light artificial aggregate and the matrix of cement. The results of the mechanical strength tests were analyzed using a computational statistics tool (Statistica software) to understand the behavior and obtain the ideal quantity of each material used in the formula of the Polymeric Lightweight Concrete. The definition of the ideal formula has the purpose of obtaining a material with the lowest possible dry density and resistance to compression in accordance with NBR 12.646/92 (≥ 2.5 MPa after 28 days). In the microstructural characterization by scanning electron microscopy it was observed an influence of the materials in the process of cement hydration, showing good interaction between the wrinkled face of the residue of unsaturated polyesters thermosetting and putty and, consequently, the final strength. The attaining of an ideal formula, given the Brazilian standards, the experimental results obtained in the characterization and comparison of these results with conventional materials, confirmed that the developed Polymeric Lightweight Concrete is suitable for the production of building elements that are advantageous for construction
Resumo:
The use of binders in the soil for the production of solid bricks is an old construction technique that has been used by several civilizations over time. At the same time, the need for environmental preservation and the tendency of scarcity of natural resources make the construction invest in researching new concepts, methods and materials for building systems for the sustainability of their economic activities. Thus arises the need to obtain building materials with low power consumption, capable of reducing the growing housing shortage of rural and urban population. Currently, research has been conducted on this topic to better understand the cementitious and pozzolanic reactions that occur in the formation of the microstructure of the soil-cement when added to other materials such as, for example, lime, and the relationship between microstructure and formed interfaces with the physical, mechanical and chemical analysis in compounds made from these ternary compositions. In this context, this study aimed to analyze the results of the influence of the incorporation of lime to the soil-cement to form a ternary mixture to produce soil-cement bricks and mortar without structural purposes. From the inclusion of contents of 6 %, 8 %, 10% and 12% lime to the soil, and soil-cement mixes in amounts of 2 %, 3 %, 4 % and 5 % were shaped-bodies of -cylindrical specimens to determine the optimum moisture content and maximum dry apparent specific weight. Then they were cured, and subjected to the tests of compressive strength, absorption and durability modified. Compositions obtained the best results in the tests performed on the bodies-of-proof cylindrical served as a parameter for molding of solid bricks, which underwent the same experimental methodology previously cited. The raw materials used, as well as compositions in which the bricks were molded solid, were characterized by physical and chemical tests, X-ray diffraction and scanning electron microscopy. The results obtained in the study indicate that the compositions studied, that showed the best results in terms of compressive strength, water absorption and durability ternary composition was soil, 10 % cement and 2 % lime
Resumo:
The sharp consumption of natural resources by the construction industry has motivated numerous studies concerning the application of waste to replace partially or fully, some materials, such as aggregates, thereby reducing the environmental impact caused by the extraction of sand and crushing process. The application of stone dust from crushing process arising as an aggregate for the production of Portland cement concrete is a viable alternative in view of the high cost of natural sands, in addition to the environmental damage which causes its operation to the environment. The stone dust has reduced cost compared to natural sand because it is produced in the beds of their own quarries, which are usually located close to major urban centers. This study examined the feasibility of using stone dust from the crushing of rock gneisses in the state of Bahia, replacing natural quartz sand. In the development of scientific study was conducted to characterize physical and chemical raw materials applied and molded cylindrical specimens , using as reference values Fck 20, Fck 25 and Fck 30 MPa ( resistance characteristic of the concrete after 28 days) in following compositions stone powder: 10%, 30%, 50 %, 100% and 100% with additive. The specimens were cured and subjected to the tests of compressive strength and water absorption, then the samples were subjected to the tests of X-ray diffraction and scanning electron microscopy. The results obtained showed that the composition with 10% stone powder showed the best results regarding the physical and mechanical tests performed, confirming the reduction in compressive strength and increased water uptake increased as the content of the powder stone in the concrete composition
Resumo:
The development of new materials to fill the demand of technological advances is a challenge for many researchers around the world. Strategies such as making blends and composites are promising alternatives to produce materials with different properties from those found in conventional polymers. The objective of this study is to evaluate the effect of adding the copolymer poly(ethylene methyl acrylate) (EMA) and cotton linter fibers (LB) on the properties of recycled poly(ethylene terephthalate) (PETrec) by the development of PETrec/EMA blend and PETrec/EMA/LB blend composite. In order to improve the properties of these materials were added as compatibilizers: Ethylene - methyl acrylate - glycidyl methacrylate terpolymer (EMA-GMA) and maleic anhydride grafted polyethylene (PE-g-MA). The samples were produced using a single screw extruder and then injection molded. The obtained materials were characterized by thermogravimetry (TG), melt flow index (MFI) mensurements, torque rheometry, pycnometry to determinate the density, tensile testing and scanning electron microscopy (SEM). The rheological results showed that the addition of the EMA copolymer increased the viscosity of the blend and LB reduces the viscosity of the blend composite. SEM analysis of the binary blend showed poor interfacial adhesion between the PETrec matrix and the EMA dispersed phase, as well as the blend composite of PETrec/EMA/LB also observed low adhesion with the LB fiber. The tensile tests showed that the increase of EMA percentage decreased the tensile strength and the Young s modulus, also lower EMA percentage samples had increased the elongation at break. The blend composite showed an increase in the tensile strength and in the Young`s modulus, and a decrease in the elongation at break. The blend formulations with lower EMA percentages showed better mechanical properties that agree with the particle size analysis which showed that these formulations presented a smaller diameter of the dispersed phase. The blend composite mechanical tests showed that this material is stronger and stiffer than the blend PETrec/EMA, whose properties have been reduced due to the presence of EMA rubbery phase. The use of EMA-GMA was effective in reducing the particle size of the EMA dispersed phase in the PETrec/EMA blend and PE-g-MA showed evidences of reaction with LB and physical mixture with the EMA
Resumo:
Rio Grande do Norte State stands out as one great producer of structural clay of the brazilian northeastern. The Valley Assu ceramic tiles production stands out obtained from ilitics ball clays that abound in the region under study. Ceramics formulation and the design of experiments with mixture approach, has been applied for researchers, come as an important aid to decrease the number of experiments necessary to the optimization. In this context, the objective of this work is to evaluate the effects of the formulation, temperature and heating rate in the physical-mechanical properties of the red ceramic body used for roofing tile fabrication of the Valley Assu, using design of mixture experiments. Four clays samples used in two ceramics industry of the region were use as raw material and characterized by X-ray diffraction, chemical composition, differential thermal analysis (DTA), thermogravimetric analysis (TGA), particle size distribution analysis and plasticity techniques. Afterwards, they were defined initial molded bodies and made specimens were then prepared by uniaxial pressing at 25 MPa before firing at 850, 950 and 1050 ºC in a laboratory furnace, with heating rate in the proportions of 5, 10 e 15 ºC/min. The following tecnologicals properties were evaluated: linear firing shrinkage, water absorption and flexural strength. Results show that the temperature 1050 ºC and heating rate of 5 ºC/min was the best condition, therefore presented significance in all physical-mechanical properties. The model was accepted as valid based of the production of three new formulations with fractions mass diferents of the initial molded bodies and heated with temperature at 1050 ºC and heating rate of 5 ºC/min. Considering the formulation, temperature and heating rate as variables of the equations, another model was suggested, where from the aplication of design of experiments with mixtures was possible to get a best formulation, whose experimental error is the minor in relation to the too much formulations
Resumo:
The National School Nutrition Program is the oldest program in the country directed at food and nutrition safety. Its aims are to offer nutritional food as a supplement to students of public and philanthropic schools. Studying school nutrition transcends the investigation as a purely social program, given that it reaches the fields of public health, nutrition and food, using a wide variety of approaches. Thus, it is characterized by a multidisciplinary study, where the disciplines work side by side in distinct aspects of a single problem. Aim: This study aims to assess hygiene practices during the preparation of meat-based meals in public schools in the city of Natal, Brazil. Methods: A list was applied at 27 schools to identify the procedures of good food preparation practices. In addition, cooking and meal distribution temperature were measured and a microbiological analysis of the final preparation and of the water used in preparing it was performed. For microbiological analyses of the food, we analyzed coliforms at 45°C, coliforms at 35°C and Enterococcus, and for the water, we analyzed thermotolerant coliforms and total coliforms, using the methods recommended by APHA, 1995. Results: Most of the schools did not meet the required standards in all the variables related to good food preparation practices, except for the time spent preparing the meat, in which 89% were within the norm. Cooking temperature of the meals was within the standard; however, the temperature at distribution and the time spent dispensing the meals were inadequate. Of the 27 schools, 22 (81.5%) showed the presence of coliforms at 35° C in at least one meal sample and 18 (66.7%) had values above the recommended limit for coliforms at 45°C. The presence of E. coli was identified in 6.1% of the samples analyzed. The presence of Enterococcus was not found at any of the schools. With respect to the water, the North district of the city was the only one that did not meet the standards for the two indicators evaluated. The contamination found was not associated with the hygiene or food storage problems observed. Conclusions: The results show that the hygiene-sanitary conditions of meat-based public school meals were unsatisfactory, demonstrating the need for improvements in the production process to preserve the health of the student population. Multidisciplinarity: Researchers from the areas of food microbiology, nutrition, public health and statistics took part in this study, a decisive factor for characterizing the research as multidisciplinary
Resumo:
It s in the city spaces, molded from the uses and daily appropriations, that life is woven, as a product of the social relationships from the accumulation of history along with the present day fabric. Within this relationship, the old and the new are elements which make up this tapestry, as a result of the contribution of successive generations. The public square is seen as an example of this relationship, since it consists of a fertile space for opportunities of urban life coexistence. It is within the trace of these considerations that the present study emerges regarding the appropriation and sociability of the Tomé de Sousa Square, located in the city of Salvador, BA, having as its main focus the special relation between the cinema and the public square, as it relates to the space of the exhibition of cinematographic art. The showing of films in public squares makes possible a distinctive means of appropriation which has occurred ever since the beginning of the cinema. Today in Brazil, projects of this nature abound, which aim at presenting the seventh art to a great portion of the population which doesn t have access to conventional movie theater projection rooms. This particular Projeto Cinema na Praça Cinema in the Square Project carried out in Salvador, has become the empirical reference point for such work. This journey reveals the fascination that this great art has woven through time, attracting and charming multitudes. The cinema touches people in a special way, stirring up affectionate feelings, which are reflected in multiple social practices. Regarding this work, what stands out above all are the projections in the squares, initiatives which make it possible for the films to be watched collectively. What was taken into account in order to carry out this work were the reports of those who came regularly to watch the cinema in the Square sessions, those involved with the cinema projects team, and the film makers. To do the work, besides a bibliographical revision, observations were made of participants in the Tomé de Sousa Square, taken from semi-structured interviews with people involved with the film projection projects and those who came regularly to the cinema in the Square sessions. Also investigations were made in newspapers, printed magazines and the internet, from document and iconographic sources. The photographic documentation proved to be an important contribution to the field work. The research therefore develops from the understanding that the social practices are what make possible the uses of and the appropriation of the spaces. Within this perspective the public square emerges as a privileged locus where possibilities flourish for multiple manifestations that social practices can generate
Resumo:
This dissertation aims to understand the importance of the National School Feeding as a strategy for ensuring the promotion of food and nutrition security in the municipality of Macaíba / RN, taking into account the implementation of the Law School Feeding, 11,947, 2009. The program was extended to all public basic education, youth and adults, in addition to ensuring that 30% of transfers from FNDE, were intended for the purchase of products from family farms. The survey was conducted with 160 students from public schools and farmers nesting Quilombo dos Palmares II, who produce on their land vegetables, fruits and cereals for their own consumption, for sale in local markets, in addition to providing for PNAE. The reciprocity between neighbors, such as mutual aid and sharing of common goods was noticeable in this group of farmers, since it was necessary to meet weekly deliveries of products to schools. As students, we applied a test of acceptability in two schools located in rural and in urban areas, to learn the opinion of ourselves in relation to school food consumed. It was concluded that to be most effective program in the region, there must be a better match in school menus, so that it can be attractive to students and to ensure greater use of fresh food, the main ingredient of same, practice of nutrition education in schools, to teach students the importance of food to health. In relation to local management, noted the need for adjustments bureaucratic as hiring staff for the departments, in order to be more agile in releasing payments to farmers, in addition to hiring assistants general services for schools, one Since the cooks exert dual role, the cooking while being responsible for cleaning the entire school environment. Government investments in the rural sector would be extremely valuable for farmers, since they need financial resources to purchase inputs, irrigation projects for gardens, availability of land for planting, transportation to facilitate the delivery of its products to schools and technical assistance more frequently
Resumo:
This work aims to understand the trajectory of immigrants living in Natal / RN, between the years 1990 and 2009, their motivations for this change, their sociability relations, as well as the impact of this group in Natal and specifically, in the district of Ponta Negra, where most of them established their residences or work. Considering that the historical, political, economical and social environment where these immigrants are inserted, are different from that experienced by former immigrants who came to Brazil in the late nineteenth and early twentieth centuries, a period of mass migration, it was revealed that immigration studied in contemporary Natal constitutes a new configuration (Elias, 1994). This new configuration is represented by several characteristics that distinguish this contemporary immigration, as: the relationship established by these foreigners, both with their country of origin and the destination, the formation of social networks that offer support to newcomers and those already installed, the relations of sociability with locals and a new relationship of belonging with the space, since the possibility of coming and going from one country to the other, allows a (re)production of their original ?? social and economic life in the new space. The research methodology was based on the analysis of narrative interviews, in light of the theory of Schütze (1977) in order to understand the faces of this immigration. As theoretical support for the data analysis the theories of authors such as Norbert Elias, presentedin his work about the established and outsiders, Pierre Bourdieu, and his concept of habitus, distinction and style of life, Georg Simmel, and his study of life in the metropolis, his analysis of the foreigner and his theory of sociability, among others. This study attempted to give visibility to foreigners living in Natal, who experience the dynamics of the district of Ponta Negra and reconstruct their daily relations of sociability in this space. In fact, the presence of foreigners in this urban context allows for the construction of new configurations, both in terms of the physical space of the neighborhood, which has been modified by the touristification process and the real estate market, which is molded to meet this demand, but also in their social sphere, with regard to the relations established between foreign residents and locals. In seeking to characterize these migratory experiences it could be understood that the trajectories of each foreigner is part of a broader social structure, which cannot be evaluated neither disconnected from the contexts in which they operate, nor under a single point of view
Resumo:
In the last three decades, the subject of the teacher's social identity has been discussed under various theoretical focuses, not only in Brazil, but also beyond our borders. In this thesis, the theme is approached starting from the theoretical proposal that has been developed by Domingos Sobrinho (1994), which is strongly based in the epistemological approach between Pierre Bourdieu’s praxiology and the Theory of the Social Representations formulated by Serge Moscovici. It presupposes that this would make it easier to apprehend the process of construction of social identity of the investigated social group. The universe of the research is constituted by teachers of the fundamental teaching of the municipal district of Maracanaú, state of Ceará, that were active in class-room work there during at least three years, and were registered or had concluded the Course of Educational Formation promoted by UECE in that municipal district. Taking into account that the teacher's social identity is a process in permanent construction, resulting of their daily experiences and of the interferences originated from of the social context, the investigative tasks were implemented in two different stages, although they complement each other. Initially, with the objective of putting in evidence the genesis of the formation of that group’s habitus, an analysis of the family and school lives of eleven teachers who participated in the course was made, using as main sources of data: thematic memorials, semi-structured interviews and observations - inside and out of the class-room – during four school semesters. In the second stage a test of free association of words was applied to 426 teachers, seeking to apprehend the structure of the social representations of family and school – a methodological strategy considered necessary to enhance and identify certain outlines of the habitus in study, besides being in agreement with the theoretical model followed. It became evident from the results that the identity of Maracanaú’s teachers is molded and transformed into a multifaceted dynamic unit that shows successes and mistakes, certainties and doubts. For instance, besides an innovative speech seeking to reassure that teaching is a profession and not a simple vocation or mission, some discourse and attitudes are identified that point to the opposite direction, extolling the school as extension of the family, defending a parental relationship with the students, and looking at certain aspects of daily school life as “sacramental”. However, in the light of science such ambiguities and incoherences are inherent to common sense discourse, where the influences of the patterns and cultural references are present in the process of identity construction of the group, which was confirmed by the research of their social representations of family and school
Resumo:
In the last three decades, the subject of the teacher's social identity has been discussed under various theoretical focuses, not only in Brazil, but also beyond our borders. In this thesis, the theme is approached starting from the theoretical proposal that has been developed by Domingos Sobrinho (1994), which is strongly based in the epistemological approach between Pierre Bourdieu s praxiology and the Theory of the Social Representations formulated by Serge Moscovici. It presupposes that this would make it easier to apprehend the process of construction of social identity of the investigated social group. The universe of the research is constituted by teachers of the fundamental teaching of the municipal district of Maracanaú, state of Ceará, that were active in class-room work there during at least three years, and were registered or had concluded the Course of Educational Formation promoted by UECE in that municipal district. Taking into account that the teacher's social identity is a process in permanent construction, resulting of their daily experiences and of the interferences originated from of the social context, the investigative tasks were implemented in two different stages, although they complement each other. Initially, with the objective of putting in evidence the genesis of the formation of that group s habitus, an analysis of the family and school lives of eleven teachers who participated in the course was made, using as main sources of data: thematic memorials, semi-structured interviews and observations - inside and out of the class-room during four school semesters. In the second stage a test of free association of words was applied to 426 teachers, seeking to apprehend the structure of the social representations of family and school a methodological strategy considered necessary to enhance and identify certain outlines of the habitus in study, besides being in agreement with the theoretical model followed. It became evident from the results that the identity of Maracanaú s teachers is molded and transformed into a multifaceted dynamic unit that shows successes and mistakes, certainties and doubts. For instance, besides an innovative speech seeking to reassure that teaching is a profession and not a simple vocation or mission, some discourse and attitudes are identified that point to the opposite direction, extolling the school as extension of the family, defending a parental relationship with the students, and looking at certain aspects of daily school life as sacramental . However, in the light of science such ambiguities and incoherences are inherent to common sense discourse, where the influences of the patterns and cultural references are present in the process of identity construction of the group, which was confirmed by the research of their social representations of family and school
Resumo:
Soil improved with the addition of cement have been utilized as an alternative to the construction of various types of geotechnical works, almost always present economic and environmental advantages. This paper presents a study on the usage of cement in the improvement of mechanical properties of sandy soils, characteristic of the region of Natal, collected from its dunes. This research was made in order to analyze the influence of cement content, voids, and also including water immersion and confining pressure. Samples molded from cement-soil mixtures were tested for unconfined compression tests and triaxial tests. The samples had the percentage of cement mixed in 2.5%, 5% and 10% by weight. The cement agent used was the Portland Cement of High Early strength(CPV-ARI), which promoted agility to the experimental procedure for presenting a rapid gain in strenght. The void ratio used ranged from 0.7 (more compact), 0,9 and 1,1(softer). The soil under study can be considered as pure sand. In general, it can be stated that the larger the amount of cement added to the sand studied is, the greater ultimate strength will be. Likewise, as more compact the soil is, the less void ratio and more resistant it will be present. The confining pressure tends to increase the resistance of the specimens. The cementing adopted grades showed that the use of different criteria for failure did not significantly alter the stress-strain parameters for the sand studied. The angle of friction values were found within the typical range of medium and compact sands. Cementing acted in the sand providing an intercepted cohesion which increased enhancing the potential cementation. In triaxial compression tests, the sand with void ratio is equal to 0.7 and showed the expected behavior for a compact sand while the stress-strain behavior of the same sand with the void ratio of 0.9 tended to be expected for the soft sand as well
Resumo:
A model of a solar oven with a reflective surface composed of two mirror segments is presented, constituting a two semi-parabolic surfaces made of fiberglass, applied on a ceramic mold, intended to be used in residential and commercial cooking. The reflective surface of the semi-parable is obtained with the use of multiple plain segments of 2 mm wide mirrors. The semi-parabolic structure has visible movements that are comparable to that of the sun. The technical details of the manufacturing and assembling processes will be presented with an analysis of the viability of thermal, economic, and materials of such prototype. This prototype has important social implications and primordial aspects, which combats the ecological damages caused by the wide-scale use of firewood during cooking. It has been demonstrated that the solar oven has the capacity to cook simultaneous two meals distinct for a family of four