Balance-bot

Research on inverted pendulum has gained momentum over the last decade on a number of robotic laboratories over the world; due to its unstable proprieties is a good example for control engineers to verify a control theory. To verify that the pendulum can balance we can make some simulations using a closed-loop controller method such as the linear quadratic regulator or the proportional–integral–derivative method. Also the idea of robotic teleoperation is gaining ground. Controlling a robot at a distance and doing that precisely. However, designing the tool to takes the best benefit of the human skills while keeping the error minimal is interesting, and due to the fact that the inverted pendulum is an unstable system it makes a compelling test case for exploring dynamic teleoperation. Therefore this thesis focuses on the construction of a two-wheel inverted pendulum robot, which sensor we can use to do that, how they must be integrated in the system and how we can use a human to control an inverted pendulum. The inverted pendulum robot developed employs technology like sensors, actuators and controllers. This Master thesis starts by presenting an introduction to inverted pendulums and some information about related areas such as control theory. It continues by describing related work in this area. Then we describe the mathematical model of a two-wheel inverted pendulum and a simulation made in Matlab. We also focus in the construction of this type of robot and its working theory. Because this is a mobile robot we address the theme of the teleoperation and finally this thesis finishes with a general conclusion and ideas of future work.

Low cost non-intrusive home energy monitoring

This thesis presents a low cost non-intrusive home energy monitor built on top of Non-Intrusive Load Monitoring (NILM) concepts and techniques. NILM solutions are already considered low cost alternatives to the big majority of existing commercial energy monitors but the goal here is to make its cost even lower by using a mini netbook as a whole in one solution. The mini netbook is installed in the homes main circuit breaker and computes power consumption by reading current and voltage from the built-in sound card. At the same time, feedback to the users is provided using the 11’’ LCD screen as well as other built-in I/O modules. Our meter is also capable of detecting changes in power and tries to find out which appliance lead to that change and it is being used as part of an eco-feedback platform that was build to study the long terms of energy eco-feedback in individuals. In this thesis the steps that were taken to come up with such a system are presented, from the basics of AC power measurements to the implementation of an event detector and classifier that was used to disaggregate the power load. In the last chapter results from some validation tests that have been performed are presented in order to validate the experiment. It is believed that such a system will not only be important as an energy monitor, but also as an open system than can be easily changed to accommodate and test new or existing nonintrusive load monitoring techniques.

Motivating the use of public transit through a mobile glanceable display

With increasing concerns about the impact of global warming on human life, policy makers around the world and researchers have sought for technological solutions that have the potential to attenuate this process. This thesis describes the design and evaluation of an information appliance that aims to increase the use of public transportation. We developed a mobile glanceable display that, being aware of the user’s transportation routines, provides awareness cues about bus arrival time, grounded upon the vision of Ambient Intelligence. We present the design process we followed, from ideation to building a prototype and conducting a field study, and conclude with a set of guidelines for the design of relevant personal information systems. More specifically we seek to test the following hypotheses: 1) That the tangible prototype that provides ambient cues will be used more frequently than a similar purpose mobile app, 2) That the tangible prototype will reduce the waiting time at the bus stop, 3) That the tangible prototype will result to reduced anxiety on passengers, 4) That the tangible prototype will result to an increase in the perceived reliability of the transit service, 5) That the tangible prototype will enhance users’ efficiency in reading the bus schedules and 6) That the tangible prototype will make individuals more likely to use public transit. In a field study, we compare the tangible prototype against the mobile app and a control condition where participants were given no external support in obtaining bus arrival information, other than their existing routines. Using qualitative and quantitative data, we test the aforementioned hypotheses and explore users’ reactions to the prototype we developed.