Agenda social nos territórios pacificados: um estudo sobre o Programa Territórios da Paz à luz da construção teórica em gestão social

O objetivo desta pesquisa foi analisar o Programa de Gestão Social em Territórios Pacificados – Territórios da Paz à luz da construção teórica da Gestão Social na academia. Com base na literatura sobre Gestão Social, buscou-se identificar as diferentes vertentes que orientam a sua discussão. Somado a isto, foram discutidos ao longo do referencial teórico questões que favorecem o entendimento do contexto no qual está inserido o Programa Territórios da Paz, tais como as favelas, política de segurança pública e o projeto de pacificação em curso na cidade do Rio de Janeiro. Tendo em vista o discurso adotado pelo Programa Territórios da Paz, optou-se por analisa-lo a partir de algumas categorias de avaliação de processos participativos deliberativos, quais sejam: Processos de Discussão, Inclusão, Pluralismo e Bem Comum. Os dados foram coletados, em um primeiro momento, por meio de pesquisa bibliográfica. Em seguida, foram realizadas entrevistas junto aos gestores sociais responsáveis pela condução do programa estudado nos diferentes territórios. Em suma, os resultados apontam para a existência de espaços para discussão, contudo sem capacidade deliberativa. Em alguns momentos, as características do que foi denominado um Programa de Gestão Social se aproximam das características da Gestão Estratégica, cujo arcabouço conceitual e instrumental se apoia sobre mecanismos de tomada de decisão baseados na hierarquia e conhecimento técnico.

A Common-feature approach for testing present-value restrictions with financial data

It is well known that cointegration between the level of two variables (labeled Yt and yt in this paper) is a necessary condition to assess the empirical validity of a present-value model (PV and PVM, respectively, hereafter) linking them. The work on cointegration has been so prevalent that it is often overlooked that another necessary condition for the PVM to hold is that the forecast error entailed by the model is orthogonal to the past. The basis of this result is the use of rational expectations in forecasting future values of variables in the PVM. If this condition fails, the present-value equation will not be valid, since it will contain an additional term capturing the (non-zero) conditional expected value of future error terms. Our article has a few novel contributions, but two stand out. First, in testing for PVMs, we advise to split the restrictions implied by PV relationships into orthogonality conditions (or reduced rank restrictions) before additional tests on the value of parameters. We show that PV relationships entail a weak-form common feature relationship as in Hecq, Palm, and Urbain (2006) and in Athanasopoulos, Guillén, Issler and Vahid (2011) and also a polynomial serial-correlation common feature relationship as in Cubadda and Hecq (2001), which represent restrictions on dynamic models which allow several tests for the existence of PV relationships to be used. Because these relationships occur mostly with nancial data, we propose tests based on generalized method of moment (GMM) estimates, where it is straightforward to propose robust tests in the presence of heteroskedasticity. We also propose a robust Wald test developed to investigate the presence of reduced rank models. Their performance is evaluated in a Monte-Carlo exercise. Second, in the context of asset pricing, we propose applying a permanent-transitory (PT) decomposition based on Beveridge and Nelson (1981), which focus on extracting the long-run component of asset prices, a key concept in modern nancial theory as discussed in Alvarez and Jermann (2005), Hansen and Scheinkman (2009), and Nieuwerburgh, Lustig, Verdelhan (2010). Here again we can exploit the results developed in the common cycle literature to easily extract permament and transitory components under both long and also short-run restrictions. The techniques discussed herein are applied to long span annual data on long- and short-term interest rates and on price and dividend for the U.S. economy. In both applications we do not reject the existence of a common cyclical feature vector linking these two series. Extracting the long-run component shows the usefulness of our approach and highlights the presence of asset-pricing bubbles.

Estimating sectoral cycles using cointegration and common features

This paper investigates the degree of short run and long run co-movement in U.S. sectoral output data by estimating sectoraI trends and cycles. A theoretical model based on Long and Plosser (1983) is used to derive a reduced form for sectoral output from first principles. Cointegration and common features (cycles) tests are performed; sectoral output data seem to share a relatively high number of common trends and a relatively low number of common cycles. A special trend-cycle decomposition of the data set is performed and the results indicate a very similar cyclical behavior across sectors and a very different behavior for trends. Indeed. sectors cyclical components appear as one. In a variance decomposition analysis, prominent sectors such as Manufacturing and Wholesale/Retail Trade exhibit relatively important transitory shocks.

Common cycles in macroeconomic aggregates (revised version)

Although there has been substantial research on long-run co-movement (common trends) in the empirical macroeconomics literature. little or no work has been done on short run co-movement (common cycles). Investigating common cycles is important on two grounds: first. their existence is an implication of most dynamic macroeconomic models. Second. they impose important restrictions on dynamic systems. Which can be used for efficient estimation and forecasting. In this paper. using a methodology that takes into account short- and long-run co-movement restrictions. we investigate their existence in a multivariate data set containing U.S. per-capita output. consumption. and investment. As predicted by theory. the data have common trends and common cycles. Based on the results of a post-sample forecasting comparison between restricted and unrestricted systems. we show that a non-trivial loss of efficiency results when common cycles are ignored. If permanent shocks are associated with changes in productivity. the latter fails to be an important source of variation for output and investment contradicting simple aggregate dynamic models. Nevertheless. these shocks play a very important role in explaining the variation of consumption. Showing evidence of smoothing. Furthermore. it seems that permanent shocks to output play a much more important role in explaining unemployment fluctuations than previously thought.

A stochastic discount factor approach to asset pricing using panel data

Using the Pricing Equation, in a panel-data framework, we construct a novel consistent estimator of the stochastic discount factor (SDF) mimicking portfolio which relies on the fact that its logarithm is the ìcommon featureîin every asset return of the economy. Our estimator is a simple function of asset returns and does not depend on any parametric function representing preferences, making it suitable for testing di§erent preference speciÖcations or investigating intertemporal substitution puzzles.

A panel data approach to economic forecasting: the bias-corrected average forecast

In this paper, we propose a novel approach to econometric forecasting of stationary and ergodic time series within a panel-data framework. Our key element is to employ the (feasible) bias-corrected average forecast. Using panel-data sequential asymptotics we show that it is potentially superior to other techniques in several contexts. In particular, it is asymptotically equivalent to the conditional expectation, i.e., has an optimal limiting mean-squared error. We also develop a zeromean test for the average bias and discuss the forecast-combination puzzle in small and large samples. Monte-Carlo simulations are conducted to evaluate the performance of the feasible bias-corrected average forecast in finite samples. An empirical exercise based upon data from a well known survey is also presented. Overall, theoretical and empirical results show promise for the feasible bias-corrected average forecast.

Common cycles in macroeconomic aggregates

Reduced form estimation of multivariate data sets currently takes into account long-run co-movement restrictions by using Vector Error Correction Models (VECM' s). However, short-run co-movement restrictions are completely ignored. This paper proposes a way of taking into account short-and long-run co-movement restrictions in multivariate data sets, leading to efficient estimation of VECM' s. It enables a more precise trend-cycle decomposition of the data which imposes no untested restrictions to recover these two components. The proposed methodology is applied to a multivariate data set containing U.S. per-capita output, consumption and investment Based on the results of a post-sample forecasting comparison between restricted and unrestricted VECM' s, we show that a non-trivial loss of efficiency results whenever short-run co-movement restrictions are ignored. While permanent shocks to consumption still play a very important role in explaining consumption’s variation, it seems that the improved estimates of trends and cycles of output, consumption, and investment show evidence of a more important role for transitory shocks than previously suspected. Furthermore, contrary to previous evidence, it seems that permanent shocks to output play a much more important role in explaining unemployment fluctuations.

A panel data approach to economic forecasting: the bias-corrected average forecast

In this paper, we propose a novel approach to econometric forecasting of stationary and ergodic time series within a panel-data framework. Our key element is to employ the bias-corrected average forecast. Using panel-data sequential asymptotics we show that it is potentially superior to other techniques in several contexts. In particular it delivers a zero-limiting mean-squared error if the number of forecasts and the number of post-sample time periods is sufficiently large. We also develop a zero-mean test for the average bias. Monte-Carlo simulations are conducted to evaluate the performance of this new technique in finite samples. An empirical exercise, based upon data from well known surveys is also presented. Overall, these results show promise for the bias-corrected average forecast.

A panel data approach to economic forecasting: the bias-corrected average forecast

In this paper, we propose a novel approach to econometric forecasting of stationary and ergodic time series within a panel-data framework. Our key element is to employ the (feasible) bias-corrected average forecast. Using panel-data sequential asymptotics we show that it is potentially superior to other techniques in several contexts. In particular, it is asymptotically equivalent to the conditional expectation, i.e., has an optimal limiting mean-squared error. We also develop a zeromean test for the average bias and discuss the forecast-combination puzzle in small and large samples. Monte-Carlo simulations are conducted to evaluate the performance of the feasible bias-corrected average forecast in finite samples. An empirical exercise, based upon data from a well known survey is also presented. Overall, these results show promise for the feasible bias-corrected average forecast.

The importance of common cyclical features in VAR analysis: a Monte-Carlo study

Despite the commonly held belief that aggregate data display short-run comovement, there has been little discussion about the econometric consequences of this feature of the data. We use exhaustive Monte-Carlo simulations to investigate the importance of restrictions implied by common-cyclical features for estimates and forecasts based on vector autoregressive models. First, we show that the ìbestî empirical model developed without common cycle restrictions need not nest the ìbestî model developed with those restrictions. This is due to possible differences in the lag-lengths chosen by model selection criteria for the two alternative models. Second, we show that the costs of ignoring common cyclical features in vector autoregressive modelling can be high, both in terms of forecast accuracy and efficient estimation of variance decomposition coefficients. Third, we find that the Hannan-Quinn criterion performs best among model selection criteria in simultaneously selecting the lag-length and rank of vector autoregressions.

The importance of Common-Cyclical Features in VAR analysis: a Monte-Carlo study (Preliminary Version)

Despite the belief, supported byrecentapplied research, thataggregate datadisplay short-run comovement, there has been little discussion about the econometric consequences ofthese data “features.” W e use exhaustive M onte-Carlo simulations toinvestigate theimportance ofrestrictions implied by common-cyclicalfeatures for estimates and forecasts based on vectorautoregressive and errorcorrection models. First, weshowthatthe“best” empiricalmodeldevelopedwithoutcommoncycles restrictions neednotnestthe“best” modeldevelopedwiththoserestrictions, duetothe use ofinformation criteria forchoosingthe lagorderofthe twoalternative models. Second, weshowthatthecosts ofignoringcommon-cyclicalfeatures inV A R analysis may be high in terms offorecastingaccuracy and e¢ciency ofestimates ofvariance decomposition coe¢cients. A lthough these costs are more pronounced when the lag orderofV A R modelsareknown, theyarealsonon-trivialwhenitis selectedusingthe conventionaltoolsavailabletoappliedresearchers. T hird, we…ndthatifthedatahave common-cyclicalfeatures andtheresearcherwants touseaninformationcriterium to selectthelaglength, theH annan-Q uinn criterium is themostappropriate, sincethe A kaike and theSchwarz criteriahave atendency toover- and under-predictthe lag lengthrespectivelyinoursimulations.

A stochastic discount factor approach to asset pricing using panel data asymptotics

Using the Pricing Equation in a panel-data framework, we construct a novel consistent estimator of the stochastic discount factor (SDF) which relies on the fact that its logarithm is the "common feature" in every asset return of the economy. Our estimator is a simple function of asset returns and does not depend on any parametric function representing preferences. The techniques discussed in this paper were applied to two relevant issues in macroeconomics and finance: the first asks what type of parametric preference-representation could be validated by asset-return data, and the second asks whether or not our SDF estimator can price returns in an out-of-sample forecasting exercise. In formal testing, we cannot reject standard preference specifications used in the macro/finance literature. Estimates of the relative risk-aversion coefficient are between 1 and 2, and statistically equal to unity. We also show that our SDF proxy can price reasonably well the returns of stocks with a higher capitalization level, whereas it shows some difficulty in pricing stocks with a lower level of capitalization.

Constructing common-factor portfolios

In this paper we construct common-factor portfolios using a novel linear transformation of standard factor models extracted from large data sets of asset returns. The simple transformation proposed here keeps the basic properties of the usual factor transformations, although some new interesting properties are further attached to them. Some theoretical advantages are shown to be present. Also, their practical importance is confirmed in two applications: the performance of common-factor portfolios are shown to be superior to that of asset returns and factors commonly employed in the finance literature.

Using common features to understand the behavior of metal-commodity prices and forecast them at different horizons

The objective of this article is to study (understand and forecast) spot metal price levels and changes at monthly, quarterly, and annual horizons. The data to be used consists of metal-commodity prices in a monthly frequency from 1957 to 2012 from the International Financial Statistics of the IMF on individual metal series. We will also employ the (relatively large) list of co-variates used in Welch and Goyal (2008) and in Hong and Yogo (2009) , which are available for download. Regarding short- and long-run comovement, we will apply the techniques and the tests proposed in the common-feature literature to build parsimonious VARs, which possibly entail quasi-structural relationships between different commodity prices and/or between a given commodity price and its potential demand determinants. These parsimonious VARs will be later used as forecasting models to be combined to yield metal-commodity prices optimal forecasts. Regarding out-of-sample forecasts, we will use a variety of models (linear and non-linear, single equation and multivariate) and a variety of co-variates to forecast the returns and prices of metal commodities. With the forecasts of a large number of models (N large) and a large number of time periods (T large), we will apply the techniques put forth by the common-feature literature on forecast combinations. The main contribution of this paper is to understand the short-run dynamics of metal prices. We show theoretically that there must be a positive correlation between metal-price variation and industrial-production variation if metal supply is held fixed in the short run when demand is optimally chosen taking into account optimal production for the industrial sector. This is simply a consequence of the derived-demand model for cost-minimizing firms. Our empirical evidence fully supports this theoretical result, with overwhelming evidence that cycles in metal prices are synchronized with those in industrial production. This evidence is stronger regarding the global economy but holds as well for the U.S. economy to a lesser degree. Regarding forecasting, we show that models incorporating (short-run) commoncycle restrictions perform better than unrestricted models, with an important role for industrial production as a predictor for metal-price variation. Still, in most cases, forecast combination techniques outperform individual models.

Using common features to understand the behavior of metal-commodity prices and forecast them at different horizons

The objective of this article is to study (understand and forecast) spot metal price levels and changes at monthly, quarterly, and annual frequencies. Data consists of metal-commodity prices at a monthly and quarterly frequencies from 1957 to 2012, extracted from the IFS, and annual data, provided from 1900-2010 by the U.S. Geological Survey (USGS). We also employ the (relatively large) list of co-variates used in Welch and Goyal (2008) and in Hong and Yogo (2009). We investigate short- and long-run comovement by applying the techniques and the tests proposed in the common-feature literature. One of the main contributions of this paper is to understand the short-run dynamics of metal prices. We show theoretically that there must be a positive correlation between metal-price variation and industrial-production variation if metal supply is held fixed in the short run when demand is optimally chosen taking into account optimal production for the industrial sector. This is simply a consequence of the derived-demand model for cost-minimizing firms. Our empirical evidence fully supports this theoretical result, with overwhelming evidence that cycles in metal prices are synchronized with those in industrial production. This evidence is stronger regarding the global economy but holds as well for the U.S. economy to a lesser degree. Regarding out-of-sample forecasts, our main contribution is to show the benefits of forecast-combination techniques, which outperform individual-model forecasts - including the random-walk model. We use a variety of models (linear and non-linear, single equation and multivariate) and a variety of co-variates and functional forms to forecast the returns and prices of metal commodities. Using a large number of models (N large) and a large number of time periods (T large), we apply the techniques put forth by the common-feature literature on forecast combinations. Empirically, we show that models incorporating (short-run) common-cycle restrictions perform better than unrestricted models, with an important role for industrial production as a predictor for metal-price variation.