Rehabilitating agricultural streams in Australia with wood : a review

Worldwide, the ecological condition of streams and rivers has been impaired by agricultural practices such as broadscale modification of catchments, high nutrient and sediment inputs, loss of riparian vegetation, and altered hydrology. Typical responses include channel incision, excessive sedimentation, declining water quality, and loss of in-stream habitat complexity and biodiversity. We review these impacts, focusing on the potential benefits and limitations of wood reintroduction as a transitional rehabilitation technique in these agricultural landscapes using Australian examples. In streams, wood plays key roles in shaping velocity and sedimentation profiles, forming pools, and strengthening banks. In the simplified channels typical of many agricultural streams, wood provides habitat for fauna, substrate for biofilms, and refuge from predators and flow extremes, and enhances in-stream diversity of fish and macroinvertebrates.

Most previous restoration studies involving wood reintroduction have been in forested landscapes, but some results might be extrapolated to agricultural streams. In these studies, wood enhanced diversity of fish and macroinvertebrates, increased storage of organic material and sediment, and improved bed and bank stability. Failure to meet restoration objectives appeared most likely where channel incision was severe and in highly degraded environments. Methods for wood reintroduction have logistical advantages over many other restoration techniques, being relatively low cost and low maintenance. Wood reintroduction is a viable transitional restoration technique for agricultural landscapes likely to rapidly improve stream condition if sources of colonists are viable and water quality is suitable.

Polycyclic aromatic hydrocarbon emission loads and profiles from the burning of locally grown wood species in Victoria, Australia - Some pilot project results

A testing facility for combustion of biomass and sampling of emissions has been established at Deakin University. In this pilot project using this facility, four kinds of locally grown wood species were burned and the particle emissions sampled and analysed for Polycyclic Aromatic Hydrocarbons (PAHs). The selected wood species covering pine, red gum, yellow box and sugar gum, are the most popular domestic fuel wood in Australia. Particulate matter emissions from burning of each load of wood were sampled from the flue using a standard stack emission sampling train. The particle-laden filters were extracted and the .extract analysed to determine PAH concentrations by Gas Chromatographyl Mass Spectrometer (Gc/MS). The sampling was conducted under two different burning conditions with the air inlet of the combustion chamber fully open and with it half open. A suite of 15 PAHs, ranging from naphthalene (C IOHB) to dibenzolahlanthracene (C12H14), were selected for analysis. PAH profiles for the four wood species, under the different burning regimes, have been generated. Some preliminary emission factors for the different wood species have been derived as microgram of summed PAHs (rPAHs) emittedlkilogram of wood burned. Total Particulate Matter (TPM) emission factors were also obtained from gravimetric measurement of the sample filter before and after the combustion. Based on these emission factors, pine displayed the highest level of rPAHs emitted from the combustion of the four wood species, with sugar gum showing the lowest level of rPAHs emission. Emission factors associated with the slow burning condition clearly showed higher l:PAH levels compared to the faster burning condition. During the faster burning condition, red gum and pine show a higher percentage of rPAH to TPM than sugar gum or yellow box. Under the slower burning. the l:PAHlTPM ratio in every case was greater.

Global review of permian Tyloplecta muir-wood and cooper, 1960 (Brachiopoda): morphology, palaeobiogeographical and palaeogeographical implications

A global review of the stratigraphical and geographical distribution of Tyloplecta reveals that the genus ranges in age from Kungurian to Changhsingian (Middle to Late Permian). Tyloplecta first evolved in South China in the Kungurian (late Early Permian). The genus went through its first diversification in the Guadalupian, suffered a major extinction at the end of the Guadalupian, and re-diversified in the Wuchiapingian. T. yangtzeensis persisted into the Changhsingian as the only survivor of the genus involved in the end-Permian mass extinction. Palaeogeographically, South China is not only the centre of origin for the genus but also an area of diversification and evolution. In addition to South China, Tyloplecta has also been recorded from the Far East Russia, Japan, central Thailand, Laos, Cambodia, Qiangtang Terrane of Tibet, Salt Range, Iran, Armenia, Hungary, Yugoslavia, and Slovenia. This geographic spread suggests that Tyloplecta was primarily restricted to the Palaeotethys and is indicative of warm-water palaeoequatorial conditions. Its presence in some of the northeast Asian terranes (e.g., parts of Japan and Far East Russia) and in the Salt Range (Pakistan) and central and north Iran (part of the Cimmerian microcontinents) demonstrate that the genus invaded the middle palaeolatitudinal regions in both hemispheres during the late Middle Permian in response to increased shallow marine biotic communications between Cathaysia in the eastern Palaeotethys and southern Angaraland, and between Cathaysia and Peri-Gondwanaland. The invasion of Tyloplecta (and some other taxa) into the southern shore waters of Angaraland may be explained by assuming ocean surface current connections and close palaeogeographical proximities between the South China, Sino-Korea and Bureya blocks. In comparison, the invasion of Tyloplecta into the Peri-Gondwanaland region is more likely a result of reduced palaeogeographical distance between South China and Peri-Gondwanaland and the appearance of the Cimmerian microcontinents as migratory stepping stones.

Study of polycyclic aromatic hydrocarbons emissions from burning of local wood species in Australia

Four kinds of Australian local wood species were burned in a domestic wood heater installed in a laboratory. The selected wood species include pine, red gum, yellow box and sugar gum, that are the most popular domestic fuel wood in Australia. Particulate matter emissions from burning of each load of wood were sampled isokinetically on filter media from the flue by standard stack emission sampling train. The particle laden filters then went for Gas Chromatography/ Mass Spectrometer (GC/MS) analysis to determine polycyclic aromatic hydrocarbons (PAHs) concentrations. The sampling was conducted under two different burning conditions – air inlet of the combustion chamber fully open and half open. Approximately 15 types of PAHs were detected. Emission factors were derived as microgram of PAHs /kg of wood burned. Total particulate emission factors were also obtained from gravimetric measurement before and after the sampling. PAH emission profiles for four species were generated from the results. Comparisons of emission factors have been conducted among different species of wood, as well as under different burning conditions, ie. fast burning and slowing burning. According to the derived emission factors, pine displayed the highest level of PAHs among the four species, followed by red gum and yellow box, whereas sugar gum showed the lowest level of PAHs. Emission factors were compared between each type of wood under two different burning conditions, the slow burning condition, which was air inlet half open, clearly showed higher PAH levels compared to the fast burning condition. Total PAH fractions on particulate matter were calculated and compared among wood types under two burning conditions. During the fast burning condition, red gum and pine have the higher percentage of PAH to total particulate matter emission than sugar gum and yellow box. When changed to slow burning, the PAH fraction on particulate matter are all increased with sugar gum having the largest increase.

Embodied energy in buildings : wood versus concrete - reply to Börjesson and Gustavsson

We analyse the wood and concrete designs of the Wälludden building described by Börjesson et al. (Energy Policy 28 (2000) 575) in terms of their embodied energy, employing an environmentally extended input–output framework in a tiered hybrid life-cycle assessment, and in a structural path analysis. We illustrate the complexity of the inter-industry supply chains underlying the upstream energy requirements for the building options, and demonstrate that higher-order inputs are difficult to capture in a conventional process analysis. Our calculations show that Börjesson and Gustavsson's estimates of energy requirements and greenhouse gas emissions are underestimated by a factor of about 2, and that corresponding greenhouse gas balances are positive at about 30 t C-eq. Nevertheless, Börjesson and Gustavsson's general result—the concrete-framed building causing higher emissions—still holds.

Reintroduction for recovery of New Holland mouse in Victoria, Australia

The New Holland Mouse (Pseudomys novaehollandiae) has a highly fragmented distribution in SE Australia. The abundance of the species is correlated with habitat succession. Optimal habitat has been identified as 2-3 years after fire, with population densities declining, sometimes to extinction, as vegetation ages. The species has become extinct at many locations in Victoria and, in 1999, was known to be extant at only four localities. When a remnant population at one locality (Anglesea) was considered at high risk of extinction, objectives identified to recover the species included determination of suitable habitat, development of ecological burning regimes, captive breeding and reintroductions. A GIS-based predictive model of habitat capability was consequently produced, areas of potentially suitable habitat for reintroductions identified and ecological burning regimes implemented. Experimental releases began in 2001 when predator-proof acclimatisation enclosures were constructed at two sites, selected on the basis of their habitat suitability. Small groups of animals have been released into, and subsequently out of, these enclosures. Movements and activity have been monitored by live-trapping, fluorescent dye and radio-tracking techniques. The results of trials have been assessed. Un-collared animals dispersed from the enclosures into surrounding areas, and gained weight, while initial releases of collared animals were less successful. Techniques and planning to improve future releases have been formulated. The future of the species in Victoria may be reliant upon the success of captive breeding and reintroductions.

Thermal evaluation of a low cost wood burner

Small-scale producers of dried products in rural areas of developing countries must often rely on sun drying to dry their crops, but this can be unreliable and produce an inferior product. There is therefore a need for simple and inexpensive combustion devices that can be fabricated and used locally. A wood burner has been constructed from a "200 litre" steel drum and has then been evaluated experimentally. The thermal efficiency of the burner was found to be 31% in two trials. An energy balance, calculated for three trials, was within + 16%. Approximately one third of the energy available in the wood was lost in the flue gases, either as sensible heat or unburned volatile gases. Excess combustion air through the burner was calculated and measured to be approximately 400% of the stoichiometric requirements. A significant amount of energy was required to heat the thermal mass surrounding the burner, indicating that a lightweight insulated structure would be more suitable in most circumstances.

Succession of small mammal communities after fire and reintroduction of the swamp antechinus 'Antechinus minimus'

This thesis is involved with changes that have occurred to small mammal populations following a major disturbance in the Anglesea region as a result of the 1983 Ash Wednesday fires. Fire, with its effects on spatial and temporal heterogeneity, was found to be an important factor in the maintenance of vegetation and small mammal community structure and diversity in the region. Successional changes in vegetation and small mammal communities were described by multivariate analyses, using data collected annually from 22 study sites. The use of factor analysis techniques, in reducing the annual capture data content, enabled long-term changes in the structure of mammal communities to be interpreted. The small mammal communities in the coastal heath and forest vegetation in the Anglesea region show evidence of a general resilience, (the degree and speed of recovery), to disturbance. Two phases of successional response to fire by mammal species have been proposed; a ‘re-establishment’ phase which occurs in the initial 5-6 years post-fire and is accompanied by rapid increase in species’ abundance, and a subsequent ‘maintenance’ phase accompanied by relatively minor changes in abundance. Habitat Suitability Indices were produced relating to these phases. Vertical density measures of understorey shrubs and herb layers showed significant relationships with small mammal species abundance at the study sites. Long term studies following major disturbances are needed to distinguish between short term recovery of plant and animal species and long term changes in these species. Studies extending over a number of years enable a better directional view of changes in small mammal communities than can be determined from . observations made over a short period. As a part of the investigation into temporal change, it was proposed to undertake trial reintroductions of the Swamp antechinus, Ant echinus minimus, a marsupial dasyurid species which was trapped in the area prior to the 1983 fire, but rarely subsequently. Other more commonly observed native small mammal species (e.g. Rattus fuscipes,R. lutreolus, Antechinus stuartii, Sminthopsis leucopus) had re-invaded the proposed reintroduction site after this fire. Failure of A. minimus to re-establish may have been due to spatial separation of the pre-fire populations coupled with the extensive area burnt in 1983, A source population of the species was located about 100km to the west and habitat utilization and interspecific and niche relationships between the species making the small mammal community explored. Discriminant analysis revealed some spatial separation of species within a habitat based on structural vegetation factors rather than floristic factors. Temporal separation of species was observed, asA. minimus were more active than Rattus species during daylight periods. There was evidence of micro-habitat selection by species, and structural vegetation factors were most commonly identified in statistical analyses as contributing towards selection by small mammal species. Following a theoretical modelling study three reintroduction trials were carried out near Anglesea during 1992-94. Individuals were subsequently radio tracked, and habitat relationships between the species in the small mammal community investigated. Although successful breeding of A, minimus occurred during the latter two trials, the subsequent fate of offspring was not determined. Invasive techniques required to adequately monitor young animals were considered potentially too damaging. Telemetry studies indicated a preference of A. minimus for short, wet heath vegetation. Structural vegetation factors were identified as being significant in discriminating between capture locations of species. Small scale and inexpensive trial reintroductions have yielded valuable additional data on this species and may be viewed as a useful tool in the conservation of other small native mammals.