Hybrid cooling system for water conservation in conventional power stations

This thesis proposes the concept of a hybrid cooling system to minimise water consumption in thermal power stations. It identifies that a significant amount of water can be potentially saved by the proposed system. Additional energy input requirements were less than previous approaches considered.

Competitive sorbtion of metals in water repellent soils: implications for irrigation recycled water

Australia is a water-stressed nation and demand on potable water supply is increasing. Consequently water conservation and reuse are increasingly becoming important. Irrigation of recycled wastewater on water repellent soils is a technology that is being trialled as a means of improving crop production and conserving potable supply. However, recycled water contains potentially harmful heavy metals. This paper reports the competitive sorption and desorption of several common heavy metals found in soils collected from a farm located in the south-east of South Australia. The soil from this location is severely water repellent, but some sites were amended with kaolinite clay (Si₄Al₄O₁₀(OH)₈) about 7 and 15 years ago. The metals studied were Cu, Pb, Cd, Cr, Ni, and Zn. Competitive sorption of the metals was distinctly observed. For all heavy metals, the quantity of metal sorbed was higher in amended soil, and there was a strong correlation between the specific sorption to total sorption ratio and the amount of clay in the soil. The sorption intensities varied with metal, Cr, Pb, and Cu having a high sorption tendencies and Zn, Cd, and Ni having comparatively low sorption tendencies. The total sorption capacity for all metals increased in clay-treated soils compared with non-treated soils. On average, clay-amended water repellent soils had a 20–40% increased capacity to adsorb total metals; however, this increase was largely caused by the increased capacities to adsorb Zn, Cd, and Ni. The effect of clay treatment largely enhanced the sorption capacity of relatively weakly adsorbing heavy metals. The implications for using recycled wastewater on the long-term sustainable agro-environmental management of these soils are discussed.

Household water use behavior : an integrated model

Water authorities are dealing with the challenge of ensuring that there is enough water to meet demand in the face of drought, population growth and predictions of reduced supply due to climate change. In order to develop  effective household demand management programs, water managers need to understand the factors that influence household water use. Following an examination and re-analysis of current water consumption behavioral models we propose a new model for understanding household water consumption. We argue that trust plays a role in household water consumption, since people will not save water if they feel others are not minimizing their water use (inter-personal trust). Furthermore, people are less likely to save water if they do not trust the water authority (institutional trust). This paper proposes that to fully understand the factors involved in determining household water use the impact of trust on water consumption needs investigation.

Incorporation of a hybrid cooling system in water cooled power stations to reduce water and energy consumptions

Water shortage is a major problem facing the power industry in many nations around the world. The largest consumer of water in most power plants is the wet cooling tower. To assist water and energy saving for thermal power stations using conventional evaporative wet cooling towers, a hybrid cooling system is proposed in this paper. The hybrid cooling system may consists of all or some of an air pre-cooler, heat pump, heat exchangers, and adsorption chillers together with the existing cooling tower. The hybrid cooling system described in the paper, consisting of a metal hydride heat pump operating in conjunction with the existing wet cooling tower, is capable of achieving water saving by reducing the temperature of warm water entering the cooling tower. Cooler inlet water temperatures effectively reduce the cooling load on existing towers. This will ultimately reduce the amount of water lost to the air by evaporation whilst still achieving the same cooling output. At the same time, the low grade waste energy upgraded by the metal hydride heat pump, in the process of cooling the water, can be used to replace the bleed of steam for the lower stage feed heaters which will increase overall cycle efficiency.

Application of novel technologies in water reclamation, reuse and recycle

Water reuse has become an integral element of the "total water resources planning and management" along with the other elements such as water conservation, water use efficiency and management of the allocation of existing water sources. Researchers are working actively on the following aspects of water reuse: identification and characterization of different wastewaters that could be reclaimed, development of treatment technologies and effluent standards, quantification of potential gains due to recycling and risk management. The wastewaters that can be reclaimed are domestic and industrial wastewaters, grey water, black water, stormwater and rain water and their potential reuse lies in agriculture, aquaculture, industries, non-potable use in residential and community fronts and indirect and direct potable use. The treatment of wastewater ranges from secondary treatment to advanced treatment, which produces different "Classes" of reclaimed water. This paper evaluates the current status of the research on the above-mentioned important aspects of water reuse with relevant case studies and the future demand for reuse water. The direction in which the future-reuse schemes should be formulated so that they are safe, environmentally sustainable and cost effective are also discussed.

Review of greywater reuse practices in Victoria

Greywater reuse has become popular in rural and urban communities of Australia. In recent years, the Barwon region of Victoria has been affected by drought and as a result, water restrictions were imposed at different stages. While a water conservation by-law was introduced in February 2003 with overwhelming community support, greywater reuse is still debated among householders, Environment Protection Authority (EPA), local councils, and the water authorities. Higher levels of greywater reuse are needed due to low average rainfall in the region and high water consumption per capita. This paper looks at the position of the different parties that govern greywater reuse and presents the factors that restrain uniform reuse practices. Factors considered include quantity and quality of greywater generated in the Barwon region, current regulatory controls as reviewed through a series of surveys of local councils and water authorities. While the water restrictions resulted in an increased demand for alternative means of watering garden areas, the regulatory conditions were found to be unsettled about greywater reuse, with a wide range of concerns making these authorities unwilling to encourage it.

Energy performance of medium-sized healthcare buildings in Victoria, Australia- a case study

This paper investigates the energy performance of three medium-sized healthcare buildings in Victoria, Australia, that operate only during the daytime. The aim is to provide preliminary understanding of energy consumption in this particular typology in Australia in relation to the available benchmarks. This paper also identifies the differences of energy consumption between different functional areas within medium health facilities. Building features and operational characteristics contributing to the variations in healthcare energy performance are discussed. The total annual energy consumption data ranging from 167-306 kWh/m(2) or 42-72 kWh/m(3) were compared against international data from various climatic zones. Some of the drivers of energy consumption were determined and potentials for energy and water conservation were identified. Comparison with international standards shows a possibility to achieve lower energy consumption in Victorian healthcare buildings.

Reshaping the worldview: case studies of faith groups’ approaches to a new Australian land ethic

This study aimed to highlight the praxis of various mainstream and alternative faith traditions in Australia with relation to environmental sustainability issues. A mixed methods approach (surveys, interviews, site visits) was used to investigate the levels of awareness and involvement of faith communities on issues including biodiversity protection, water conservation, energy efficiency, waste management and cultural property heritage. The aim of this chapter is to highlight a theme of integration (or lack thereof) that arose out of the interviews which formed a critical part of the participants’ worldview. A brief overview of the relationships of attitudes and behaviours to environmental issues and the importance placed on values and worldviews is provided. Individuals from 40 faith groups participated in the study; in this chapter, individuals and case studies from ten different groups are highlighted. These range from the conventional, mainstream Christian traditions to alternative Christian and Eastern traditions as well as the new age movement. The study found that mainstream traditions were making important attempts at integrating their worldview into appropriate environmental management strategies; however, the impact was marginal overall. The lesser known and alternative traditions, however, were at a significant leading edge of integrating praxis; yet, because these traditions are viewed with an element of suspicion, their efforts were marginalized by members of other faiths and the public. Thus, there are several points of convergence and divergence that faith traditions have with regard to environmental sustainability.

Oyster (Ostrea edulis) extirpation and ecosystem transformation in the Firth of Forth, Scotland

Marine inshore communities, including biogenic habitats have undergone dramatic changes as a result of exploitation, pollution, land-use changes and introduced species. The Firth of Forth on the east coast of Scotland was once home to the most important oyster (Ostrea edulis Linnaeus, 1758) beds in Scotland. 19th and early 20th century fisheries scientists documented the degradation and loss of these beds, yet transformation of the wider benthic community has been little studied. We undertook archival searches, ecological surveys and shell community analysis using radioisotope dated sediment cores to investigate the history of decline of Forth oyster beds over the last 200 years and the changes to its wider biological communities. Quadrat analysis of the present day benthos reveal that soft-sediment communities dominate the Firth of Forth, with little remaining evidence of past oyster beds in places where abundant shell remains were picked up by a survey undertaken in 1895. Queen scallops (Aequipecten opercularis Linnaeus, 1758) and horse mussels (Modiolus modiolus Linnaeus, 1758) were once common within the Forth but have also markedly decreased compared to the earlier survey. Ouranalyses of shell remains suggest that overall mollusc biomass and species richness declined throughout the 19th century and early 20th century, suggesting broader-scale community change as human impacts increased and as habitats degraded. Inshore communities in the Firth of Forth today are less productive and less diverse compared to past states, with evidence suggesting that most of the damage was done by early bottom trawling and dredging activities. Given the pervasive nature of intensive trawling over the past 150 years, the kind of degradation we document for the Firth of Forth is likely to be commonplace within UK inshore communities.

Taking environmental water requirements and climate change into account in the designation and management of protected areas for floodplain ecosystems

In 2005, the Victorian government asked the Victorian Environmental Assessment Council (VEAC) to 1) identify and evaluate the extent, condition, values, management, resources and uses of riverine red gum forests and associated fauna, wetlands, floodplain ecosystems and vegetation communities in northern Victoria; and 2) make recommendations relating to the conservation, protection and ecological sustainable use of public land. The design of a comprehensive, adequate and representative (CAR) reserve system was a key part of the recommendations made by VEAC. In order to assist in the decision-making for environmental water allocation for protected areas and other public land, a process for identifying flood-dependent natural values on the Victorian floodplains of the River Murray and its tributaries was developed.

Although some areas such as the Barmah forest are very well known, there have been few comprehensive inventories of important natural values along the Murray floodplains. For this project, VEAC sought out and compiled data on flood requirements (natural flood frequency, critical interval between floods, minimum duration of floods) for all flood-dependent ecological vegetation classes (EVCs) and threatened species along the Goulburn, Ovens, King and Murray Rivers in Victoria. The project did not include the Kerang Lakes and floodplains of the Avoca, Loddon and Campaspe Rivers. 186 threatened species and 110 EVCs (covering 224,247 ha) were identified as flood-dependent and therefore at risk from insufficient flooding.

Past environmental water allocations have targeted a variety of different natural assets (e.g. stressed red gum trees, colonial nesting waterbirds, various fish species), but consideration of the water requirements of the full suite of floodplain ecosystems and significant species has been limited. By considering the water requirements of the full range of natural assets, the effectiveness of water delivery for biodiversity can be maximised. This approach highlights the species and ecosystems most in need of water and builds on the icon sites approach to view the Murray floodplains as an interconnected system. This project also identified for the first time the flood-frequency and duration requirements for the full suite of floodplain ecosystems and significant species.

This project is the most comprehensive identification of water requirements for natural values on the floodplain to date, and is able to be used immediately to guide prioritisation of environmental watering. As more information on floodplain EVCs and species becomes available, the water requirements and distribution of values can be refined by ecologists and land and water managers. That is, the project is intended as the start of an adaptive process allowing for the incorporation of monitoring and feedback over time. The project makes it possible to transparently and easily communicate the extent to which manipulated or natural flows benefit various natural values. Quantitative and visual outputs such as maps will enable environmental managers and the public to easily see which values do and do not receive water (see http://www.veac.vic.gov.au/riverredgumfinal.htm for further details).