36 resultados para three-dimensional display
em Deakin Research Online - Australia
Resumo:
Complex multiphase microstructures were obtained in transformation induced plasticity C–Mn–Si–(Nb–Al–Mo) steels by simulated controlled thermomechanical processing. These microstructures were characterized using transmission electron microscopy, X-ray diffraction and three-dimensional atom probe tomography (APT), which was used to determine the partitioning of elements between different phases and microconstituents. The measured carbon concentration (not, vert, similar0.25 at%) in the ferrite of carbide-free bainite was higher than expected from para-equilibrium between the austenite and ferrite, while the concentrations of substitutional elements were the same as in the parent austenite suggesting that incomplete bainite transformation occurred. In contrast, the distribution of substitutional elements between the ferrite lath and austenite in carbide-containing bainite indicated a complete bainite reaction. The average carbon content in the retained austenite (3.2 ± 1.6 at%) was somewhat higher than the T0 limit. On the basis of the APT measured composition, the calculated Ms temperatures for retained austenite were above room temperature, indicating its low chemical stability.
Resumo:
Laser shock peening (LSP) is an innovative surface treatment technique for metal alloys, with the great improvement of their fatigue, corrosion and wear resistance performance. Finite element method has been widely applied to simulate the LSP to provide the theoretically predictive assessment and optimally parametric design. In the current work, 3-D numerical modelling approaches, combining the explicit dynamic analysis, static equilibrium analysis algorithms and different plasticity models for the high strain rate exceeding 106s-1, are further developed. To verify the proposed methods, 3-D static and dynamic FEA of AA7075-T7351 rods subject to two-sided laser shock peening are performed using the FEA package–ABAQUS. The dynamic and residual stress fields, shock wave propagation and surface deformation of the treated metal from different material modelling approaches have a good agreement.
Resumo:
Three-dimensional virtual environments (3dves) are the new generation of digital multi-user social networking platforms. Their immersive character allows users to create a digital humanised representation or avatar, enabling a degree of virtual interaction not possible through conventional text-based internet technologies. As recent international experience demonstrates, in addition to the conventional range of cybercrimes (including economic fraud, the dissemination of child pornography and copyright violations), the 'virtual-reality' promoted by 3dves is the source of great speculation and concern over a range of specific and emerging forms of crime and harm to users. This paper provides some examples of the types of harm currently emerging in 3dves and suggests internal regulation by user groups, terms of service, or end-user licensing agreements, possibly linked to real-world criminological principles. This paper also provides some directions for future research aimed at understanding the role of Australian criminal law and the justice system more broadly in this emerging field.
Resumo:
This thesis investigates three-dimensional porous polymer blend scaffolds fabricated using supercritical carbon dioxide combined with solvent etching. These scaffolds with improved pore structures and interconnectivity can be used in regeneration medicine and tissue engineering application.
Resumo:
In this article, we report on the preparation and cell culture performance of a novel fibrous matrix that has an interbonded fiber architecture, excellent pore interconnectivity, and controlled pore size and porosity. The fibrous matrices were prepared by combining melt-bonding of short synthetic fibers with a template leaching technique. The microcomputed tomography and scanning electron microscopy imaging verified that the fibers in the matrix were highly bonded, forming unique isotropic pore architectures. The average pore size and porosity of the fibrous matrices were controlled by the fiber/template ratio. The matrices having the average pore size of 120, 207, 813, and 994 mm, with the respective porosity of 73%, 88%, 96%, and 97%, were investigated. The applicability of the matrix as a three-dimensional (3D) tissue scaffold for cell culture was demonstrated with two cell lines, rat skin fibroblast and Chinese hamster ovary, and the influences of the matrix porosity and surface area on the cell culture performance were examined. Both cell lines grew successfully in the matrices, but they showed different preferences in pore size and porosity. Compared with two-dimensional tissue culture plates, the cell number on 3D fibrous matrices was increased by 97.27% for the Chinese hamster ovary cells and 49.46% for the fibroblasts after 21 days of culture. The fibroblasts in the matrices not only grew along the fiber surface but also bridged among the fibers, which was much different from those on two-dimensional scaffolds. Such an interbonded fibrous matrix may be useful for developing new fiber-based 3D tissue scaffolds for various cell culture applications.
Resumo:
This paper uses finite element upper and lower bound limit analysis to produce chart solutions for three-dimensional (3D) natural slopes for both short- and long-term stability. The presented chart solutions are convenient tools that can be used for preliminary design purposes. The rigorous limit analysis results in this paper were found to bracket the true factor of safety within ±10% or better, which can be used as a benchmark for the solutions from other methods. The depth of the slip surfaces is observed to be generally shallow for most analyzed cases, particularly for the long-term slope stability problem. In addition, it was found that using a two-dimensional (2D) analysis may lead to significant differences in estimating safety factors, which can differ by 2%–60% depending on the slope geometry and soil properties. Therefore, great care and judgement are required when applying 2D analyses to 3D slope problems.
Resumo:
The sperm cells of Rhododendron laetum and R. macgregoriae differentiate within the pollen tube about 24 h after germination in vitro. Threedimensional reconstruction shows that the sperm cells are paired together, and both have extensions that link with the tube nucleus, forming a male germ unit. Quantitative analysis shows that the sperm cells in each pair differ significantly in surface area, but not in cell volume nor in numbers of mitochondria or plastids. When isolated from pollen tubes by osmotic shock, the sperm cells became ellipsoidal and surrounded by their own plasma membrane, while a proportion remained in pairs linked by the inner tube plasma membrane. Both generative and sperm cells are visualized in pollen tube preparations by immunofluorescence with anti-tubulin and anti-actin monoclonal antibodies (MAbs) combined with H33258 fluorescence of the nuclei. Video-image processing shows the presence of an axial microtubule cage in the generative cells, and some microtubules are present in the cytoplasmic extensions that clasp the tube nucleus. Following sperm cell division, the extensive phragmoplast between the sperm nuclei is partitioned by the plasma membranes.
Resumo:
Multilobal fibres are irregularly shaped fibres with several surface channels or grooves. Scaffolds created from these fibres have high surface area which may enhance cell density. This study compared the cell growth of dermal fibroblasts and osteoblast-like SaOS2 cells on multilobal fibre nonwoven scaffolds to the conventional fibre scaffolds. Cells were cultured on round nylon, trilobal nylon, round polyethylene terephthalate (PET) and multilobal PET scaffolds for 14 days. There were more cells growing on trilobal nylon and PET multilobal scaffolds than their round counterparts. The preference to the type of multilobal scaffolds was cell dependent. The density of fibroblast increased 37% on trilobal nylon compared to round nylon scaffolds after 14 days of culture. SaOS2 cells preferred the multilobal PET scaffolds, exhibiting a 66% increase in cell number after 14 days of culture. Scaffolds manufactured from multilobal fibres have the ability to accommodate a high number of cells, demonstrating a great potential in tissue engineering applications.
Resumo:
Getting intimate: A 3D interconnected Bi0.5Sr 0.5FeO3-ð (BSF)-Ag electrocatalyst is prepared from a BSF-AgNO3 core-shell precursor in one step. The nanometer-sized Ag enhances the sintering process, enabling an optimum cathode microstructure and good cathode-to-electrolyte attachment upon firing at 850°C. A solid-oxide fuel cell based on this cathode shows a near 100% peak power density enhancement at 550°C.
Resumo:
Background: The Broberg and Morrey modification of the Mason classification of radial head fractures has substantial interobserver variation. This study used a large web-based collaborative of experienced orthopaedic surgeons to test the hypothesis that three-dimensional reconstructions of computed tomography (CT) scans improve the interobserver reliability of the classification of radial head fractures according to the Broberg and Morrey modification of the Mason classification.
Methods: Eighty-five orthopaedic surgeons evaluated twelve radial head fractures. They were randomly assigned to review either radiographs and two-dimensional CT scans or radiographs and three-dimensional CT images to determine the fracture classification, fracture characteristics, and treatment recommendations. The kappa multirater measure (κ) was calculated to estimate agreement between observers.
Results: Three-dimensional CT had moderate agreement and two-dimensional CT had fair agreement among observers for the Broberg and Morrey modification of the Mason classification, a difference that was significant. Observers assessed seven fracture characteristics, including fracture line, comminution, articular surface involvement, articular step or gap of ≥2 mm, central impaction, recognition of more than three fracture fragments, and fracture fragments too small to repair. There was a significant difference in kappa values between three-dimensional CT and two-dimensional CT for fracture fragments too small to repair, recognition of three fracture fragments, and central impaction. The difference between the other four fracture characteristics was not significant. Among treatment recommendations, there was fair agreement for both three-dimensional CT and two-dimensional CT.
Conclusions: Although three-dimensional CT led to some small but significant decreases in interobserver variation, there is still considerable disagreement regarding classification and characterization of radial head fractures. Three-dimensional CT may be insufficient to optimize interobserver agreement.
Resumo:
Purpose : This study tests the hypothesis that 3-dimensional computed tomography (CT) reconstructions improve interobserver agreement on classification and treatment of coronoid fractures compared with 2-dimensional CT.
Methods : A total of 29 orthopedic surgeons evaluated 10 coronoid fractures on 2 occasions (first with radiographs and 2-dimensional CT and then with radiographs and 3-dimensional CT), separated by a minimum of 2 weeks. Surgeons classified fractures according to the classifications of Regan and Morrey and of O'Driscoll et al., identified specific characteristics, recommended the most appropriate treatment approach, and made treatment recommendations. The kappa multirater measure (κ) was calculated to estimate agreement between observers.
Results : Regardless of the imaging modality used, there was fair to moderate agreement for most of the observations. Three-dimensional CT improved interobserver agreement in Regan and Morrey's classsication (κ3-dimensional = 0.51 vs κ2-dimensional = 0.40; p < .001) and O'Driscoll et al.'s classifications (κ3-dimensional = 0.48 vs κ2-dimensional = 0.42; p = .009). There were trends toward better reliability for 3-dimensional reconstruction in recognition of coronoid tip fractures (κ3-dimensional = 0.19, κ2-dimensional = 0.03; p = .268), comminution (κ3-dimensional = 0.41 vs κ2-dimensional = 0.29; p = .133), and impacted fragments (κ3-dimensional = 0.39 vs κ2-dimensional = 0.27; p = .094), and in surgeons' opinions on the need for something other than screws or plate for surgical fixation (κ3-dimensional = 0.31 vs κ2-dimensional = 0.15; p = .138). Interobserver agreement on treatment approach was better with 2-dimensional CT (κ3-dimensional = 0.27, κ2-dimensional = 0.32; p = .015).
Conclusions : Three-dimensional CT reconstructions improve interobserver agreement with respect to fracture classification compared with 2-dimensional CT.