Establishment of temperature control scheme for microbioreactor operation using integrated microheater

This paper presents design and fabrication of a microbioreactor platform, and implementation of two temperature control methods (i.e. on-off and PID) and their performance evaluation on the microbioreactor platform (working volume ~300 μL). The temperature of the microbioreactor content is controlled by using a subminiature heater placed underneath the microbioreactor and is measured with a miniature Pt 100 sensor. The microbioreactor is also integrated with a magnetic stirring capacity and a water evaporation control scheme. Programs for the two temperature control methods are written in LabVIEW software and implemented by interfacing them with a data acquisition card. It is shown that by implementing on–off and PID temperature control methods, the temperature of the microbioreactor content can be tightly controlled with an accuracy of approximately ±0.5 °C of the set point values. Both control methods also provide a good response and settling time values (i.e. around 2 min). Contrary to the on/off control method, the PID control method requires no adjustments whenever the set-point values are modified. The PID temperature control method works well for the entire tested range.

Investigation into and control of microwave induced thermal run-away

Analyses the mechanisms that cause thermal run-away in some materials. A control strategy was devised to provide effective temperature control independent of material characteristics. The set of control criteria derived from mathematical models allowed the control limits of a microwave processing system to calculated.

Individual boldness traits influenced by temperature in male Siamese fighting fish.

Temperature has profound effects on physiology of ectothermic animals. However, the effects on temperature variation on behavioral traits are poorly studied in contrast to physiological endpoints. This may be important as even small differences in temperatures have large effects on physiological rates including overall metabolism, and behavior is known to be linked to metabolism at least in part. The primary aim of this study was to determine the effects of ambient temperature on boldness responses of a species of fish commonly used in behavioral experiments, the Siamese fighting fish (Betta splendens). At 26°C, subjects were first examined for baseline behaviors over three days, using three different (but complementary) 'open field' type assays tested in a fixed order. Those same fish were next exposed to either the same temperature (26°C) or a higher temperature (30°C) for 10days, and then the same behavioral assays were repeated. Those individuals exposed to increased temperatures reduced their latency to leave the release area (area I), spent more time in area III (farthest from release area), and were more active overall; together we infer these behaviors to reflect an increase in general 'boldness' with increased temperature. Our results add to a limited number of studies of temperature effects on behavioral tendencies in ectotherms that are evident even after some considerable acclimation. From a methodological perspective, our results indicate careful temperature control is needed when studying behavior in this and other species of fish.

Capitanian (late Guadalupian, permian) global brachiopod palaeobigeography and latitudinal diversity pattern

A global database containing 3365 occurrences, 821 species and 251 genera of the Capitanian (Late Guadalupian, Permian) brachiopod faunas from 24 stations has been analyzed by cluster analysis using the Jaccard and Otsuka coefficients and the probabilistic index of similarity, nonmetric multidimensional scaling and minimum spanning tree. Two supergroups, three groups and six subgroups are revealed and interpreted as representing, respectively, two biotic realms (the Palaeoequatorial and Gondwanan Realms), two regions and six provinces. An additional realm (the Boreal Realm), based on the fauna from Spitsbergen, also appears recognizable although it also shows considerable similarities with southwestern North America and the northern margin of Gondwana as revealed by the statistical analysis. The Palaeoequatorial Realm can be further subdivided into the North America Region and the Asian Tethyan Region. The six biotic provinces are the Cathaysian Province in the Palaeotethys and Mesotethys, the Greenland-Svalbard Province in the Arctic region, the Austrazean Province in eastern Australia and New Zealand, the Grandian Province in western North America and the two transitional zones (the Himalayan Province in the southern temperate zone and the Sino–Mongolian–Japanese Province in the northern temperate zone). Polynomial regression analysis and rarefaction analysis indicate that the generic diversities of brachiopod faunas during the Capitanian peaked in the Palaeoequatorial Cathaysian Province and the two transitional zones (Himalayan Province and Sino–Mongolian–Japanese Province), but fell dramatically in the polar regions. The generic diversity of the Palaeoequatorial Grandian Province is apparently lower than in the two transitional zones of temperate palaeolatitudes, suggesting that the generic diversity of Capitanian brachiopod faunas does not exhibit a strict negative correlation with palaeolatitudes. This in turn would suggest that biogeographical determinants (such as geographical barriers, inhabitable area and ocean currents) other than latitude-related temperature control may also have played an important role in the dispersal of some brachiopods and the characterization of some local provinces and high diversities. The Capitanian global brachiopod palaeobiogeography is generally comparable with those in the Wuchiapingian and Changhsingian, but with some notable differences. These include: (1) that the Grandian Province of the Capitanian in western North America vanished after the end-Guadalupian regression, (2) that the western Tethyan Province of the Lopingian could not be distinguished in the Capitanian, and (3) that the Austrazean Province was larger in area than either in the Wuchiapingian or in the Changhsingian.

Prediction interval-based neural network modelling of polystyrene polymerization reactor - a new perspective of data-based modelling

In this paper, prediction interval (PI)-based modelling techniques are introduced and applied to capture the nonlinear dynamics of a polystyrene batch reactor system. Traditional NN models are developed using experimental datasets with and without disturbances. Simulation results indicate that traditional NNs cannot properly handle disturbances in reactor data and demonstrate a poor forecasting performance, with an average MAPE of 22% in the presence of disturbances. The lower upper bound estimation (LUBE) method is applied for the construction of PIs to quantify uncertainties associated with forecasts. The simulated annealing optimization technique is employed to adjust NN parameters for minimization of an innovative PI-based cost function. The simulation results reveal that the LUBE method generates quality PIs without requiring prohibitive computations. As both calibration and sharpness of PIs are practically and theoretically satisfactory, the constructed PIs can be used as part of the decision-making and control process of polymerization reactors. © 2014 The Institution of Chemical Engineers.

Prediction interval-based modelling of polymerization reactor: a new modelling strategy for chemical reactors

Precise and reliable modelling of polymerization reactor is challenging due to its complex reaction mechanism and non-linear nature. Researchers often make several assumptions when deriving theories and developing models for polymerization reactor. Therefore, traditional available models suffer from high prediction error. In contrast, data-driven modelling techniques provide a powerful framework to describe the dynamic behaviour of polymerization reactor. However, the traditional NN prediction performance is significantly dropped in the presence of polymerization process disturbances. Besides, uncertainty effects caused by disturbances present in reactor operation can be properly quantified through construction of prediction intervals (PIs) for model outputs. In this study, we propose and apply a PI-based neural network (PI-NN) model for the free radical polymerization system. This strategy avoids assumptions made in traditional modelling techniques for polymerization reactor system. Lower upper bound estimation (LUBE) method is used to develop PI-NN model for uncertainty quantification. To further improve the quality of model, a new method is proposed for aggregation of upper and lower bounds of PIs obtained from individual PI-NN models. Simulation results reveal that combined PI-NN performance is superior to those individual PI-NN models in terms of PI quality. Besides, constructed PIs are able to properly quantify effects of uncertainties in reactor operation, where these can be later used as part of the control process. © 2014 Taiwan Institute of Chemical Engineers.

Performance analysis of three advanced controllers for polymerization batch reactor: an experimental investigation

The performances of three advanced non-linear controllers are analyzed for the optimal set point tracking of styrene free radical polymerization (FRP) in batch reactors. The three controllers are the artificial neural network-based MPC (NN-MPC), the artificial fuzzy logic controller (FLC) as well as the generic model controller (GMC). A recently developed hybrid model (Hosen et al., 2011a. Asia-Pac. J. Chem. Eng. 6(2), 274) is utilized in the control study to design and tune the proposed controllers. The optimal minimum temperature profiles are determined using the Hamiltonian maximum principle. Different types of disturbances are introduced and applied to examine the stability of controller performance. The experimental studies revealed that the performance of the NN-MPC is superior to that of FLC and GMC. © 2013 The Institution of Chemical Engineers.

Control over the hydrophobic behavior of polystyrene surface by annealing temperature based on capillary template wetting method

The wetting behavior of water droplets was studied on tunable nanostructured polystyrene (PS) surfaces fabricated by temperature-induced capillary template wetting. The surface morphology of PS varied with the annealing temperature. Contact angle (CA) measurements showed that the wettability of polystyrene surfaces could be tuned from hydrophobic (CA = 104°) to superhydrophobic (CA = 161°) by rendering different morphologies, which could be explained by two distinct wetting modes, i.e., the Wenzel and Cassie–Baxter wetting state. Meanwhile, the critical annealing temperature inducing wetting transition between the Wenzel state and Cassie–Baxter state was obtained. This approach could be easily extended to produce superhydrophobic surfaces on other thermoplastic polymers.

Thermal control of high pressure die casting using computational fluid dynamics

The quality of high pressure die castings is a function of many interdependent parameters. It has been observed that many defects detected in the HPDC castings can be tracked back to poor die temperature distribution in the critical areas. It has therefore been recommended that the development of a technique to directly control the critical features - making them less sensitive to thermal related parameters - be very beneficial to the HPDC industry. From the information obtained from thermal image (processing), computational fluid dynamics has been applied to design the layout of internal cooling system and assign the flow conditions such as flow rate and pressure of the cooling water. it is observed that CFD prediction provides an excellent insight into the thermal balance of the high pressure die casting.

Robust control applied to metal spraying for rapid tooling

The spray forming process is a novel method of rapidly manufacturing tools and dies for stamping and injection operations. The process sprays molten tool steel from a set of arc spray guns onto a ceramic former to build up a thick steel shell. The volumetric contraction that occurs as the steel cools is offset by a volumetric expansion taking place within the sprayed steel, which allows the dimensional accurate tools to be produced. To ensure that the required phase transformation takes place, the temperature of the steel is regulated during spraying. The sprayed metal acts both as a source of mass and a source of heat and by adjusting the rate at which metal is sprayed; the surface temperature profile over the surface of the steel can be controlled. The temperature profile is measured using a thermal imaging camera and regulated by adjusting the rate at which the guns spray the steel. Because the temperature is regulated by adjusting the feed rate to an actuator that is moving over the surface, this is an example of mobile control, which is a class of distributed parameter control. The dynamic system has been controlled using a PI controller before. The paper describes the application of H∞ tracking type controller as the desire was for the average temperature to follow a desired profile. A study on the controllability of the underlying system was aimed at.

Industrial application of thermal image processing and thermal control

Industrial application of infrared thermography is virtually boundless as it can be used in any situations where there are temperature differences. This technology has particularly been widely used in automotive industry for process evaluation and system design. In this work, thermal image processing technique will be introduced to quantitatively calculate the heat stored in a warm/hot object and consequently, a thermal control system will be proposed to accurately and actively manage the thermal distribution within the object in accordance with the heat calculated from the thermal images.

Influence of temperature on evaporative water loss and cutaneous resistance to water vapour diffusion in the orange-thighed frog (Litoria xanthomera)

We evaluated the effect of ambient temperatures between 25 and 43°C on the rate of evaporative water loss (EWL) in eight adult Litoria xanthomera (average body mass = 7.3 ± 0.6 g). Frogs were placed in a cylindrical chamber that permitted them to fully conceal their ventral surfaces using a water-conserving posture. Their EWL was 7.1 ± 0.7 mg g^–1 h^–1 at 25°C and reached 28.0 ± 2.5 mg g^–1 h^–1 at 43°C. Agar replicas of the frogs were used to evaluate boundary-layer resistances associated with the EWL measurements and, thus, to permit evaluation of cutaneous resistance to vapour diffusion (r_c) in live frogs. The r_c of L. xanthomera was stable over the temperature range of 25–35°C, averaging about 28 s cm^–1, and then declined stepwise with ambient temperatures above 37°C. The highest r_c recorded for each individual over the range of temperatures studied averaged 32.0 ± 1.2 s cm^–1. The thermolabile nature of r_c demonstrates a well developed thermoregulatory control of EWL in this species, a trait very similar in pattern and extent to that previously measured in the closely related Litoria chloris.

Inverse opal gas sensors : Zn(II)-doped tin dioxide systems for low temperature detection of pollutant gases

Focusing here on the effects of zinc doping in a nanocrystalline matrix of tin dioxide, inverse opal prototype sensors are presented and extensively studied as superior candidates for gas sensing applications. Courtesy of factors including controlled porosity, enhanced surface to volume ratio and homogeneous dispersion of species in the crystalline lattice assured by the sol–gel technique, prototype sensors were prepared with high dopant ratios in a range of new compositions. Exploiting their high sensitivities to low-gas concentrations at low working temperatures, and thanks to the presented templated sol–gel approach, the prepared sensors open up new frontiers in compositional control over the sensing oxide materials, consequently widening the possibilities available in on-demand gas sensor synthesis.

Control of ovarian development in the yabby (Cherax destructor)

A study under controlled conditions of ovarian development and rematuration in the yabby (Cherax destructot) was undertaken. The purpose of the study was to improve fundamental understanding of the reproductive biology of the species and provide a basis for application to hatchery management in culture. A review was made of the current status of yabby culture in Australia and the present understanding of reproductive biology of decapod Crustacea. The review emphasised factors controlling several aspects of ovarian development, in particular the processes of vitellogenesis. The subsequent study was designed within the context of current hatchery practice and was based on existing knowledge of decapod reproduction, The sexual differentiation of the yabby after hatching was investigated by serial histological sections, and experiments were carried out to investigate the possibility of sex reversal of males. Most of this Investigation was concerned with removing the influence of the androgenic gland in directing male development, with the intent of observing the development of the elementary gonadal tissue into ovary. It was found that in contrast to other crustacean species, the sex of the yabby becomes fixed before the development of external secondary sexual characteristics, and before the androgenic gland can be discerned. Ovarian tissue developed in females at less than 8 weeks after hatching. A preliminary examination was undertaken for feminising parasites in gonadal tissue of a hermaphrodite yabby. Investigation of the ovary after spawning demonstrated that whilst the female was held under constant conditions of temperature and photoperiod, little rematuration occurred. Except for generation of previtellogenic oocytes during the first two days, the gonaciosomatic index remained low for up to 5 months after spawning. If the temperature of the female was reduced to 10°C and maintained constant, the previtellogenic oocytes were partially resorbed over a three week period. Rematuration then commenced, albeit at a low rate because of the reduced temperature, A method for standardising gonadosomatic indices was developed which took into account differences in hepatopancreatic nutrient reserves of individuals and loss of one or more appendages. This part of the study also considered constraints to rematuration and developed a method of accounting for differences in the ability of females to remature after spawning. Experiments were carried out to investigate the effect of crowding and temperature manipulation on initiating ovarian rematuration and to determine the rate of rematuration at 22°C once initiated. The duration of low temperature had no effect on rematuration; an overnight cooling was sufficient to initiate the process, Rematuration to the end of stage 2 vltellogenesis was substantially complete within 10 days. Crowding of females suppressed rematuration, but less than ideal water quality was not found to have any effect. The presence of a male initiated rematuration at a similar rate, but also led to stage 3 vitetlogenesis and spawning. A study was made of the pheromonal influence of the male through water borne factors without success. Rematuration could not be induced in ovigerous females. The literature review indicated that ovarian rematuration was under the control of an ovary stimulating hormone produced by the thoracic nerve ganglia. Attempts were therefore made to stimulate ovarian rematuration by incorporating the thoracic nerve into the diet of females. Attempts were also made to induce the release of ovary stimulating hormone from the thoracic nerve with 5-hydroxytryptamine, and also with octopamine. No effects were found, but a significant difference between the neurophysiology of the yabby and northern hemisphere crayfish was observed, and the implications of this finding are discussed. The study did not produce any conclusive evidence of an ovary stimulating hormone for the yabby. A model of ovarian rematuration which collects the findings of the experimental investigations was developed, and was used to suggest a hatchery broodstock management protocol. This model differs from existing models in that rematuration triggers and nutritional status are considered.