Understanding criminal behaviour: identifying psychological differences between domestically violent offenders and non-offenders

Numerous theories have been formulated in an attempt to explain the psychological differences between violent offenders and non-offenders. Constructs that have emerged as salient in such scholarship include anger expression, social problem solving, locus of control, attitudes toward women, impulsivity and temper. Although a considerable amount of sound research has been conducted into 'violent offending' per se, in general terms, research into family and domestic violence is yet to be as methodologically and theoretically rigorous. In an attempt to link these areas of work, and to identify the risk factors (or 'criminogenic needs') of specific sub-groups of male offenders, this research compared: (I) property offenders, (2) those who had been· 'violent against strangers', (3) those who had been 'violent against intimates' and (4) non-offenders. In an effort to address one of the shortcomings of prior research, potentially confounding variables such as age, education level cultural identity, and socio-economic status were controlled for in an effort to arrive at more meaningful representations of each offender group's specific psychological deficits and abundances. A number of differences were highlighted between the groups, but few of these remained after demographic
covariates were controlled for. This paper details the nature of these differences, while also proposing that future studies adopt a similar methodology.

Symptoms, ill-health and quality of life of the members of a Porton Down veterans' support group

Background There has been a Human Volunteer Programme at the British chemical weapons research facility at Porton Down since the First World War, in which some of the participants were exposed to chemical warfare agents.

Aim To identify any striking specific morbidity patterns in members of the Porton Down Veterans Support Group (PDVSG).

Methods A self-completed postal questionnaire was prepared including health immediately after the visits to Porton Down, subsequent diagnoses and hospital admissions, symptoms in, and after, the first 5 years after the visits, fatigue symptoms and current quality of life, measured using the SF-36.

Results Responses were received from 289 of 436 (66%). Results reported here relate to 269 male respondents of mean age 66.8 years. Sixty-six per cent reported their first visit to Porton Down in the 1950s. The most common diagnoses or hospital admissions reported were diseases of the circulatory system. In the first 5 years after their visits the most common symptoms were headache, irritability or outbursts of anger and feeling un-refreshed after sleep. In the later period, most common symptoms were fatigue, feeling un-refreshed after sleep and sleeping difficulties. Sixty-five per cent met the definition for a case of ‘fatigue’. Current quality of life dimensions were consistently lower than age-specific estimates from general population samples.

Conclusions Members of the PDVSG responding to this survey reported poorer quality of life than the general population. Despite there being no clear pattern of specific morbidities, we cannot rule out ill-health being potentially associated with past experience at Porton Down

Critical intellectual resources for praxis in physical education teacher education : the limits to rationality

This study focuses on the way four student-teachers engage with critical social discourses in a year-long physical education unit. The student-teachers were encouraged to examine and (re)construct their pedagogy through their interactions with critical discourses. Drawing on their personal theories and actions, the study examines the extent to which critical intellectual resources can provide pedagogical frames of reference that are 'practical and non-ideal'. Using a critical ethnographic methodology the students' interactions with critical social discourses are diagnosed across three levels. The first level is the case study presentations of each student's engagement with the critical intellectual resources and the extent to which they were able to understand and implement them. The second level involves an interpretation of the individual cases that is informed by Brian Fay's (1987) metatheoretical reconstruction of the critical social sciences. In the third stage of diagnosis the study focuses on retheorising critical aspirations for praxis pedagogy in physical education. Critical scholars within the physical education arena argue that critical praxis represents a pedagogy based on a 'world view' of the potential for agents to engage in a rational reordering of their qualitative existence. The essence of their claim is that critical discourses have the potential to facilitate a mode of praxis through which physical education teachers might better recognise, understand, critique and transform their values and practices. However, there is broad recognition that the translation of social-critical discourses into a pedagogic context is highly problematic. Interpretation of the study is provided by Fay's (1987) 'limits to change' thesis which recognises that critical aspirations must ultimately be adopted and implemented by real people in real settings. As a diagnostic frame of reference, Fay insists that a 'complete' critical theory [of physical education] be simultaneously scientific, critical, practical and non-ideal. In seeking to temper the "e; over-rationalistic"e; tendency of the critical project he recognises the historical, embedded, embodied and traditional nature of human existence Criticisms of critical theories of education traverse a number of philosophic perspectives. Recent post-structural criticisms of truth regimes, knowledge-power differentials, rationality and agency have seriously destabilised modernist justifications of the critical agenda. Critical theories of physical education have not been absolved of such criticism. A prominent element of this study is its promotion of a dialectical relationship between agency and structure to extend critical conceptualisations of physical education pedagogy. Through the mediation of structural determinism and self-determination this research proffers a means of practically advancing a critical praxis in physical education. The conclusion of this thesis outlines some broad recommendations pertaining to the introduction of social critical discourses in physical education teacher education.

Low strain processing of LC and ULC steels

Temper rolling and tension levelling are commonly used to manufacture flat rolled steel. Both processes lengthen the steel at strains up to 3% by applying a load and stretching the strip. By latering the balance between the load and the tension the formability of the low carbon and ultra low carbon steel may be optimised.

Effects of tool positioning on joint interface microstructure and fracture strength of friction stir lap Al-to-steel welds

Friction stir lap welding (FSLW) experiments have been conducted to study the effects of tool positioning on microstructures formed in the Al-to-steel interface region and on joint strength, defined as maximum applied force over the width (F m/w s) of the test sample, of the welds. Various pin positioning and speed conditions were used in the FSLW experiments followed by microstructure examination on the interface regions and tensile-shear testing on the welds, including an examination on crack propagation in mixed stir zone. It was found that when the pin was close to the bottom steel piece, Al-to-steel reaction occurred resulting in intermetallic outbursts formed along the interface. This represents the case of incomplete metallurgical joint. When the pin was lowered to just reach the steel, a thin and continued interface intermetallic layer formed. Evidences and consideration on growth kinetics have suggested that the layer could only remain thin (≤2.5 μm) during FSLW. This layer could bear a high load during tensile-shear testing and the adjacent aluminium deformed and fractured instead. The resulting F m/w s was high. When the pin penetrated to steel, F m/w s reduced due to brittle fracture being dominant inside mixed stir zone. Evidences have shown that the amount of penetration and speed condition during FSLW do not have large effects on F m/w s.

Development of an inverse routine to predict residual stresses in the material based on a bending test

Bending and reverse bending are the dominant material deformations in roll forming, and hence property data derived from bend tests could be more relevant than tensile test data for numerical simulation of a roll forming process. Recent investigations have shown that residual stresses change the material behavior close to the yield in a bending test. So, residual stresses introduced during prior steel processing operations may affect the roll forming process, and therefore they need to be included in roll forming simulations to achieve improved model accuracy. Measuring the residual stress profile experimentally is time consuming and has limited accuracy while analytical models that are available require detailed information about the pre-processing conditions that is generally not available for roll forming materials. The main goal of this study is to develop an inverse routine that determines a residual stress profile through the material thickness based on experimental pure bend test data. A numerical model of the skin passing (temper rolling) process is performed to introduce a residual stress profile in DP780 steel sheet. The skin passed strips are used in a pure bending simulation to record moment-curvature data and this data is then applied in an inverse analysis to predict the residual stress profile in the material. Comparison of the residual stress profile predicted by the inverse routine with that calculated by finite element analysis (FEA) indicates an inverse approach combined with pure bend test may present an alternative to predict residual stresses in sheet metals.

The influence of residual stress on a roll forming process

Roll forming is increasingly used in the automotive industry to form High Strength Steel (HSS) and Advanced High Strength Steel (AHSS) for structural components. Because of the large variety of applications of roll forming in the industry, Finite Element Analysis (FEA) is increasingly utilized for roll forming process design. Bending is the dominant deformation mode in roll forming and sheet materials used in the process are often temper rolled (skin passed), roller- or tension-levelled. These processes introduce residual stresses into the material, and recent studies have shown that those affect the material behaviour in bending. A thickness reduction rolling process available at Deakin that leads to material deformation similar to an industrial temper rolling operation was used in this study to introduce residual stresses into a dual phase, DP780, steel strip. The initial and thickness reduced strips were then used in a 5-stand experimental V-section roll forming set-up to identify the effect of residual stress on the final shape. The influence of residual stress and the effect of plastic deformation on the material behaviour in roll forming are separately determined in numerical simulation. The results show that the thickness reduction rolling process decreases the maximum bow height while the springback angle and end flare increase. Comparison with experimental results shows that using material data from the conventional tensile test in a numerical simulation does not allow for the accurate prediction of shape defects in a roll forming process if a residual stress profile exists in the material. On the other hand including the residual stress information leads to improved model accuracy.

Precarious decencies: negotiating creative (im)mortalities, in life, together

This paper takes up the question of what might hinder the collaborative impulse among artists and specifically poets, and offers—as one possible answer—the complication posed by the urge of an artist for immortality, or for their (individual) name to live on. The paper begins by returning to a moment in Plato, namely that of the Symposium and its observations concerning the connection between poiesis (making) and a questing after immortality. Contrasting with what seems like Plato's broadly positive framing, the paper takes up a second reading of immortality (or the 'will-to-live') found in an early text of the Yogic canon, that of Patanjali's Yoga Sutras. In this second text, written somewhat later than Plato's, the will-to-live is framed otherwise, as one of five afflictions that can be 'made thin' by practice. The paper's wager is that, viewed in this way, as an affliction, the will-to-live (or urge for immortality) deserves consideration as a hindrance to the impulse towards collaboration. Noting, however, that in the poiesis of writing poetry, where there is both the making of things and the action of making things, this creative constellation always contains the tempering solution to its own inherent lures. Writing, although providing fuel for immortal appetites (due to what it makes), also works to temper the worst of this same impulse via the contribution of practice—as dedication, craft and community-as-practice. The practice of writing, therefore, is already at play, and can be emphasised explicitly for any poet or maker who also wants to be able to want to collaborate. The practice of writing, then, and its turn away from investments in identity, works to thin out the more destructive face of an urge for a dubious eternity that can eclipse our ability to work together creatively with others in this life.

An inverse routine to predict residual stress in sheet material

A method is presented to determine residual stress distribution in sheet material from data collected in a free bending test. It may be used where the residual stress distribution is symmetrical about the mid-surface as it is usually the case for frequently-used sheet metal post-processing techniques such as skin-pass or temper rolling, tension- and roller leveling. An existing inverse technique is used to obtain a residual stress profile and material constants that provide the best fit in a finite element analysis of bending with the experimentally derived moment-curvature relation. The method is verified for bending of a low-carbon stainless steel using measurement of residual stress by X-ray diffraction. The residual stresses were induced in the sheet by cold rolling. The technique described here can be used industrially as a rapid method of investigating residual stresses in incoming sheet. In processes where the deformation is principally one of bending, such as cold roll forming, it is known that residual stresses have an influence on shape defects and springback and the method presented here can be used to determine whether incoming sheet is suitable for further processing and also as a means of obtaining improved material data input for numerical simulation.