Sulfatide-tenascin interaction mediates binding to the extracellular matrix and endocytic uptake of liposomes in glioma cells

Tenascin-C is an extracellular matrix glycoprotein, whose expression is highly restricted in normal adult tissues, but markedly up-regulated in a range of tumors, and therefore serves as a potential receptor for targeted anticancer drug or gene delivery. We describe here a liposomal carrier system in which the targeting ligand is sulfatide. Experiments with tenascin-C-expressing glioma cells demonstrated that binding of liposomes to the extracellular matrix relied essentially on the sulfatide-tenascin-C interaction. Following binding to the extracellular matrix, the sulfatide-containing liposomes were internalized via both caveolae/lipid raft- and clathrin-dependent pathways, which would ensure direct cytoplasmic release of the cargoes carried in the liposomes. Such natural lipid-guided intracellular delivery targeting at the extracellular matrix glycoproteins of tumor cells thus opens a new direction for development of more effective anticancer chemotherapeutics in future.

Exponential stabilization of neural networks with various activation functions and mixed time-varying delays

This paper presents some results on the global exponential stabilization for neural networks with various activation functions and time-varying continuously distributed delays. Based on augmented time-varying Lyapunov-Krasovskii functionals, new delay-dependent conditions for the global exponential stabilization are obtained in terms of linear matrix inequalities. A numerical example is given to illustrate the feasibility of our results.

Stabilization of highly unsaturated fatty acids and delivery into foods

Highly unsaturated fatty acids derived from fish or algal oils, particularly EPA and DHA, are in high demand as healthy food ingredients in fortified foods. Due to their oxidative instability most food products incorporate stabilized microencapsulated EPA and DHA oils to avoid negative sensory impact associated with oxidation of these fatty acids. Complex coacervation has been particularly successful in stabilizing fish oil and providing an ingredient with a sensory shelf-life consistent with that of the food product. Overcoming the technical challenges associated with the instability of these oils will help drive growth of the omega-3 fortified healthy food ingredient market.

Collagen type-I leads to in vivo matrix mineralization and secondary stabilization of Mg-Zr-Ca alloy implants

Biodegradable magnesium-zirconia-calcium (Mg-Zr-Ca) alloy implants were coated with Collagen type-I (Coll-I) and assessed for their rate and efficacy of bone mineralization and implant stabilization. The phases, microstructure and mechanical properties of these alloys were analyzed using X-ray diffraction (XRD), optical microscopy and compression test, respectively, and the corrosion behavior was established by their hydrogen production rate in simulated body fluid (SBF). Coll-I extracted from rat tail, and characterized using fourier transform infrared (FT-IR) spectroscopy, was used for dip-coating the Mg-based alloys. The coated alloys were implanted into the femur bones of male New Zealand white rabbits. In vivo bone formation around the implants was quantified by measuring the bone mineral content/density (BMC/BMD) using dual-energy X-ray absorptiometry (DXA). Osseointegration of the implant and new bone mineralization was visualized by histological and immunohistochemical analysis. Upon surface coating with Coll-I, these alloys demonstrated high surface energy showing enhanced performance as an implant material that is suitable for rapid and efficient new bone tissue induction with optimal mineral content and cellular properties. The results demonstrate that Coll-I coated Mg-Zr-Ca alloys have a tendency to form superior trabecular bone structure with better osteoinduction around the implants and higher implant secondary stabilization, through the phenomenon of contact osteogenesis, compared to the control and uncoated ones in shorter periods of implantation. Hence, Coll-I surface coating of Mg-Zr-Ca alloys is a promising method for expediting new bone formation in vivo and enhancing osseointegration in load bearing implant applications.

Investigation of progress of reactions and evolution of radial heterogeneity in the initial stage of thermal stabilization of PAN precursor fibres

The relationship between process parameters and structural transformations in the fibres at each stage of the carbon fibre manufacturing process play a crucial role in developing high performance carbon fibres. Here we report a systematic method which uses the combination of Taguchi approach and scientific evaluation techniques to establish these relationships for the initial stage of thermal stabilization. Density, cyclization index and fraction of reacted nitriles of a precursor containing acrylonitrile, methacrylate and itaconic acid (AN/MA/IA) were used to assess the progress of stabilization in the fibres with respect to various combinations of process parameters. The extent of progress of stabilization improved with increase in temperature (from 225 to 235 °C) and time (from 12 to 24 min) whereas an opposite trend was observed with increase in the tension on the fibres from (1600-2550 cN). According to optical microscopy, radial heterogeneity was observed in the fibres treated at 235 °C. Interestingly, we were able to identify the existence of heterogeneous modulus distribution from skin to core of the precursor fibres which was further transferred to treated fibres. The overall radial modulus of treated fibres was higher than the precursor fibres. In contrast to the literature, the fracture morphology of the fibre samples indicated that initiation of crack is caused by surface defects rather than radial heterogeneity.

Molecular mechanism of stabilization of thin films for improved water evaporation protection

All-atom molecular dynamics simulations and experimental characterization have been used to examine the structure and dynamics of novel evaporation-suppressing films where the addition of a water-soluble polymer to an ethylene glycol monooctadecyl ether monolayer leads to improved water evaporation resistance. Simulations and Langmuir trough experiments demonstrate the surface activity of poly(vinyl pyrrolidone) (PVP). Subsequent MD simulations performed on the thin films supported by the PVP sublayer show that, at low surface pressures, the polymer tends to concentrate at the film/water interface. The simulated atomic concentration profiles, hydrogen bonding patterns, and mobility analyses of the water-polymer-monolayer interfaces reveal that the presence of PVP increases the atomic density near the monolayer film, improves the film stability, and reduces the mobility of interfacial waters. These observations explain the molecular basis of the improved efficacy of these monolayer/polymer systems for evaporation protection of water and can be used to guide future development of organic thin films for other applications.

Exponential stabilization of non-autonomous delayed neural networks via Riccati equations

This paper concerns with the problem of exponential stabilization for a class of non-autonomous neural networks with mixed discrete and distributed time-varying delays. Two cases of discrete time-varying delay, namely (i) slowly time-varying; and (ii) fast time-varying, are considered. By constructing an appropriate Lyapunov-Krasovskii functional in case (i) and utilizing the Razumikhin technique in case (ii), we establish some new delay-dependent conditions for designing a memoryless state feedback controller which stabilizes the system with an exponential convergence of the resulting closed-loop system. The proposed conditions are derived through solutions of some types of Riccati differential equations. Applications to control a class of autonomous neural networks with mixed time-varying delays are also discussed in this paper. Some numerical examples are provided to illustrate the effectiveness of the obtained results.

Static output feedback frequency stabilization of time-delay power systems with coordinated electric vehicles state of charge control

In this paper, for the first time, electric vehicles are used for both the primary and secondary frequency controls to support power plants to rapidly suppress fluctuations in the system frequency due to load disturbances. Via networked control and wide-area communication infrastructures, multiple interval time-varying delays exist in the communication channels between the control center, power plant, and an aggregation of electric vehicles. By coordinating batteries’ state of charge control, the behaviors of the vehicle owners and the uncertainties imposed by the changes of the batteries’ state of charge are taken intoconsideration. A power system model incorporating multiple time-varying delays and uncertainties is first proposed. Then, a robust static output feedback frequency controller is designed to guarantee the resulting closed-loop system stable with an H∞ attenuation level. By utilizing a novel integral inequality, namely refined-Jensen inequality, and an improved reciprocally convex combination, the design conditions are formulated in terms of tractable linear matrix inequalities which can be efficiently solved by various computational tools. The effectiveness of the proposed control scheme is verified by extensive simulations.

Structural transformation of polyacrylonitrile fibers during stabilization and low temperature carbonization

The effect of oxidative stabilization and carbonization processes on the structure, mass and mechanical properties of polyacrylonitrile (PAN) precursor fibers was analyzed. A gradual densification of the fibers occurring from mass loss, decrease in fiber diameter and increase in density were observed after stabilization at a maximum temperature of 255 °C and carbonization at a maximum temperature of 800 °C. The tensile strength and modulus of the fibers were found to decrease after stabilization but then increased after low temperature carbonization. The thermal processing of the precursor fibers affected their mode of failure after tensile loading, changing from a ductile type of failure to a brittle type. The type of failure correlated well with the crystal structure changes in the fibers. Whilst the PAN precursor fiber started to exotherm above 225 °C in air, no prominent exothermic reaction was measured in the carbonized fibers in air up to 430 °C. The aromatization index of stabilized fiber was calculated to be ∼66%, and that of carbonized fiber was ∼99%. FTIR studies indicated that the variation in the chemical structure of the fibers with the stabilization of the fibers. Radial heterogeneity in the stabilized fibers was observed however it was not promoted to the carbonized fibers. Finally, a method to calculate mass retention of PAN precursor fiber after heat treatment was developed, and the calculated percentage mass retained of the precursor fiber after oxidation and carbonization were found to be 81% and 51%, respectively. . This study proposes an effective method to calculate the percentage of mass retained by precursor fibers after stabilization and low temperature carbonization to provide a model for evaluating carbon fiber yield from a given amount of fibers.