A computerized method for objective measurement of muscle tone

This article is concentrated on the objective computerizing method of measuring of muscle tone using compressive and decompressive deformation of superficial skeletal muscle of wrist in vivo. Four indices were highly recommended for complex analysis of muscle tone.

Competing ethical paradigms in forensic psychiatry and forensic psychology: commentary for a special section of legal and criminological psychology

In her paper Gwen Adshead (2013) identifies the principle of respect for justice as the foundation for ethical practice in forensic psychiatry. This commentary discusses how forensic psychologists have approached a key aspect of the justice principle, the ethical imperative to promote the welfare of the individual client. The approaches of the psychiatric and psychological professions are compared and the role of psychologists as allied health professionals working in the forensic setting considered.

Compression and extrusion of metals using rotating dies

Experimental and theoretical investigations of compression and extrusion of metals with steadily or cyclically rotating dies were carried out. Reasonably simple models were produced by classical plasticity theory and analytical equations were developed to establish a theoretical basis for the associated phenomena. Analytical solutions agreed well with the experimental results.

Monte Carlo calculations of the free energy of binary SII hydrogen clathrate hydrates for identifying efficient promoter molecules

The thermodynamics of binary sII hydrogen clathrates with secondary guest molecules is studied with Monte Carlo simulations. The small cages of the sII unit cell are occupied by one H2 guest molecule. Different promoter molecules entrapped in the large cages are considered. Simulations are conducted at a pressure of 1000 atm in a temperature range of 233?293 K. To determine the stabilizing effect of different promoter molecules on the clathrate, the Gibbs free energy of fully and partially occupied sII hydrogen clathrates are calculated. Our aim is to predict what would be an efficient promoter molecule using properties such as size, dipole moment, and hydrogen bonding capability. The gas clathrate configurational and free energies are compared. The entropy makes a considerable contribution to the free energy and should be taken into account in determining stability conditions of binary sII hydrogen clathrates.

Weak monotonicity of Lehmer and Gini means

We analyze directional monotonicity of several mixture functions in the direction (1,1...,1), called weak monotonicity. Our particular focus is on power weighting functions and the special cases of Lehmer and Gini means. We establish limits on the number of arguments of these means for which they are weakly monotone. These bounds significantly improve the earlier results and hence increase the range of applicability of Gini and Lehmer means. We also discuss the case of affine weighting functions and find the smallest constant which ensures weak monotonicity of such mixture functions.

Experimental and theoretical investigation of compression of a cylinder using a rotating platen

A rig was constructed to carry out compression of an aluminum cylinder with a monotonically rotating platen. The tests carried out showed that the compression load decreased and the side wall bulge severity reduced when the die was rotated. Not all the work supplied by the rotating dies was transferred to the work-piece; circumferential slippage was frequently observed at the die/material interface. This slippage was quantified by comparing measurements made during interrupted testing with the angular velocity of the die. A compound velocity field based on an exponential cusp description of the barreling was employed in an upper bound analysis. An approximate analytical solution was obtained for the degree of barreling and the compression pressure. The model is able to reproduce the decrease in barreling and compression loads with increasing die rotation.

Energy density of foods and beverages in the Australian food supply: influence of macronutrients and comparison to dietary intake

Objectives: The energy density (ED) of the diet is considered an important determinant of total energy intake and thus energy balance and weight change. We aimed to compare relationships between ED and macronutrient content in individual food and beverage items as well as population diet in a typical Western country. Design: Nutrient data for 3673 food items and 247 beverage items came from the Australian Food and Nutrient database (AusNut). Food and beverage intake data came from the 1995 Australian National Nutrition Survey (a 24-h dietary recall survey in 13 858 people over the age of 2). Relationships between ED and macronutrient and water content were analysed by linear regression with 95% prediction bands. Results: For both individual food items and population food intake, there was a positive relationship between ED and percent energy as fat and negative relationships between ED and percent energy as carbohydrate and percent water by weight. In all cases, there was close agreement between the slopes of the regression lines between food items and dietary intake. There were no clear relationships between ED and macronutrient content for beverage items. Carbohydrate (mostly sucrose) contributed 91, 47, and 25% of total energy for sugar-based, fat-based, and alcohol-based beverages respectively. Conclusions: The relationship between ED and fat content of foods holds true across both population diets and individual food items available in the food supply in a typical Western country such as Australia. As high-fat diets are associated with a high BMI, population measures with an overall aim of reducing the ED of diets may be effective in mediating the growing problem of overweight and obesity.

Resistance to compression behavior of alpaca and wool

This study compares the resistance to compression behavior of wool and alpaca fibers. It shows that alpaca fibers have a much lower resistance to compression than wool, and there is little correlation between the resistance to compression and the curvature for alpaca fibers. Yet for wool fibers, the correlation between resistance to compression and curvature is very strong and positive. The differences in fiber curvature and scale profiles of alpaca and wool, together with the test method for resistance to compression, may explain their different resistances to compression.

Net energy analysis of solar and conventional domestic hot water systems in Melbourne, Australia

It is commonly assumed that solar hot water systems save energy and reduce greenhouse gas emissions. The net energy requirement of solar hot water systems has rarely been analysed, including their embodied energy. The extent to which solar hot water systems save energy compared to conventional systems in Melbourne, Australia, is shown through a comparative net energy analysis. It was shown that the embodied energy component of the net energy requirement of solar and conventional hot water systems was insignificant. The solar hot water systems provided a net energy saving compared to the conventional systems after 0.5–2 years, for electric- and gas-boosted systems respectively.

Net energy analysis of solar and conventional domestic hot water systems in Melbourne, Australia

It is commonly assumed that solar hot water systems save energy and reduce greenhouse gas emissions. Very rarely has the life-cycle energy requirements of solar hot water systems been analysed, including their embodied energy. The extent to which solar hot water systems save energy compared to conventional systems in Melbourne, Australia, is shown through a comparative net energy analysis. The solar systems provided a net energy saving compared to the conventional systems after 0.5 to 2 years, for electricity and gas systems respectively.

Deformation behaviour of a cylinder under simultaneous compression and torsion

A number of experiments involving the compression of an Aluminum cylinder with concurrent die rotation were carried out. Two important features were observed: one was that die rotation reduced the degree of bulging and the other was that the compression load decreased. An upper bound analysis with a velocity field consisting of a compound exponential cusp representation was utilized to obtain an approximate analytical solution in a closed form. The theoretical result reproduced the reduction in bulging severity with die rotation as well as the changes in compression pressure.

Stakeholder and gender characteristics of mining and energy IPO boards of directors

The mining and energy sectors are particularly publicly sensitive sectors and subject to a high degree of public scrutiny. Evan and Freeman (1993) suggest that such public scrutiny needs may be better met by having direct public stakeholder representation on the board of directors. Similarly, Bilimoria (2000) argues a strong commercial case for engaging women on boards. This paper investigates the number and proportion of non equity holding public stakeholder directors and the number and proportion of women directors on the boards of Australian mining and energy company initial public offerings (IPOs) and reports a paucity of public stakeholder directors and also a low proportional female representation on such IPO boards.

Photosynthesis of hydrogen and methane as key components for clean energy system

While researchers are trying to solve the world's energy woes, hydrogen is becoming the key component in sustainable energy systems. Hydrogen could be produced through photocatalytic water-splitting technology. It has also been found that hydrogen and methane could be produced through photocatalytic reduction of carbon dioxide with water. In this exploratory study, instead of coating catalysts on a substrate, pellet form of catalyst, which has better adsorption capacity, was used in the photo-reduction of carbon dioxide with water. In the experiment, some water was first absorbed into titanium dioxide pellets. Highly purified carbon dioxide gas was then discharged into a reactor containing these wet pellets, which were then illuminated continuously using UVC lamps. Gaseous samples accumulated in the reactor were extracted at different intervals to analyze the product yields. The results confirmed that methane and hydrogen were photosynthesized using pellet form of TiO₂ catalysts. Hydrogen was formed at a rate as high as 0.16 micromoles per hour (μmol h⁻¹). The maximum formation rate of CH₄ was achieved at 0.25 μmol h⁻¹ after 24 h of irradiation. CO was also detected.

Identifying the energy gap: magnitude and determinants of 5-year weight gain in midage women

Objective: The aims of this study were to estimate average yearly weight gain in midage women and to identify the determinants of weight gain and gaining weight at double the average rate.
Research Methods and Procedures: The study sample comprised 8071 participants (45 to 55 years old) in the Australian Longitudinal Study on Women's Health who completed mailed surveys in 1996, 1998, and 2001.
Results: On average, the women gained almost 0.5 kg per year [average 2.42 kg (95% confidence interval, 2.29 to 2.54) over 5 years]. In multivariate analyses, variables associated with energy balance (physical activity, sitting time, and energy intake), as well as quitting smoking, menopause/hysterectomy, and baseline BMI category were significantly associated with weight gain, but other behavioral and demographic characteristics were not. After adjustment for all of the other biological and behavioral variables, the odds of gaining weight at about twice the average rate (>5 kg over 5 years) were highest for women who quit smoking (odds ratio = 2.94; 95% confidence interval, 2.17, 3.96). There were also independent relationships between the odds of gaining >5 kg and lower levels of habitual physical activity, more time spent sitting, energy intake (but only in women with BMI > 25 at baseline), menopause transition, and hysterectomy.
Discussion: The average weight gain equates with an energy imbalance of only about 10 kcal or 40 kJ per day, which suggests that small sustained changes in the modifiable behavioral variables could prevent further weight gain.