The study of metal nitride layer formation by solid-state reactions

A new solid-state reaction to form metal nitrides has been investigated. It was confirmed that single phase chromium nitride is formed by a solid-state diffusion reaction between iron nitride and chromium chloride powders at temperatures between 570-700°C. The discovered reaction can be applied to form chromium nitride coatings on tool steels for metal forming applications.

Optical and photocatalytic properties of nanocrystalline TiO2 synthesised by solid-state chemical reaction

Nanoparticulate TiO₂ is of interest for a variety of technological applications, including optically transparent UV-filters and photocatalysts for the destruction of chemical waste. The successful use of nanoparticulate TiO₂ in such applications requires an understanding of how the synthesis conditions effect the optical and photocatalytic properties. In this study, we have investigated the effect of heat treatment temperature on the properties of nanoparticulate TiO₂ powders that were synthesised by solid-state chemical reaction of anhydrous TiOSO₄ with Na₂CO₃. It was found that the photocatalytic activity increased with the heat treatment temperature up to a maximum at 600 °C and thereafter declined. In contrast, the optical transparency decreased monotonically with the heat treatment temperature. These results indicate that solid-state chemical reaction can be used to prepare powders of nanoparticulate TiO₂ with properties that are optimised for use as either optically transparent UV-filters or photocatalysts.

Diorganotin dications stabilized by neutral ligands in the solid state: [R2Sn(H2O)2(OPPh3)2](O3SCF3)2 (R = Me, Bu)

The synthesis of [R₂Sn(H₂O)₂(OPPh₃)₂](O₃SCF₃)₂ (R = Me (1), Bu (2)) by the consecutive reaction of R₂SnO (R = Me, Bu) with triflic acid and Ph₃PO is described. Compounds 1 and 2 feature dialkyltin(IV) dications [R₂Sn(H₂O)₂(OPPh₃)₂]^₂+ apparently stabilized by the neutral ligands in the solid state. Compounds 1 and 2 readily dehydrate upon heating at 105 and 86 °C, respectively. The preparative dehydration of 1 afforded [Me₂Sn(OPPh₃)₂(O₃SCF₃)](O₃SCF₃) (1a), which features both bidentate and non-coordinating triflate anions. In compounds 1 and 2 the ligands Ph₃PO and H₂O are kinetically labile in solution and undergo reversible ligand exchange reactions. Compounds 1, 1a and 2 were characterized by multinuclear solution and solid-state NMR spectroscopy, IR spectroscopy, electrospray mass spectrometry, conductivity measurements, thermogravimetry and X-ray crystallography.

Oligomethylene-bridged dinuclear triorganotin triflates and diphenylphosphinates. Ion pairing in the solid state and electrolytic dissociation in solution of [Ph2Sn(CH2)nSnPh2X](O3SCF3) (X = OH, O2PPh2; n = 1-3)

The condensation of [Ph₂(OH)Sn(CH₂)_nSn(OH)Ph₂] (1-3; n = 1-3) with HO₃SCF₃ and HO₂PPh₂ provided [Ph₂Sn(CH₂)_nSnPh₂(OH)](O₃SCF₃) (4-6; n = 1-3) and [Ph₂(O₂PPh₂)Sn(CH₂)_nSn(O₂PPh₂)Ph₂] (10-12; n = 1-3), respectively. The reaction of [Ph₂Sn(CH₂)_nSnPh₂(OH)](O₃SCF₃) (4-6; n = 1-3) with HO₂PPh₂ and NaO₂PPh₂ gave rise to the formation of [Ph₂Sn(CH₂)_nSnPh₂(O₂PPh₂)](O₃SCF₃) (7-9; n = 1-3) and [Ph₂(OH)Sn(CH₂)_nSn(O₂PPh₂)Ph₂] (13-15; _n = 1-3), respectively. In the solid state, compounds 4-9 comprise ion pairs of cationic cyclo-[Ph₂SnCH₂SnPh₂(OH)]₂²⁺, cyclo-[Ph₂Sn(CH₂)_nSnPh₂(OH)]⁺ (n = 2, 3), and cyclo-[Ph₂Sn(CH₂)_nSnPh₂(O₂PPh₂)]⁺ (n = 1-3) and triflate anions. In MeCN, the eight-membered-ring system cyclo-[Ph₂SnCH₂SnPh₂(OH)]₂²⁺ appears to be in equilibrium with the four-membered-ring system cyclo-[Ph₂SnCH₂SnPh₂(OH)]⁺. In contrast, compounds 10-15 show no ionic character. Compounds 1-15 were characterized by multinuclear NMR spectroscopy in solution and in the solid state, IR spectroscopy, conductivity measurements, electrospray mass spectrometry, osmometric molecular weight determinations, and X-ray crystallography (4, 5, 7, and 12).

Nature of hardness evolution in nanocrystalline NiTi shape memory alloys during solid-state phase transition

Due to a distinct nature of thermomechanical smart materials' reaction to applied loads, a revolutionary approach is needed to measure the hardness and to understand its size effect for pseudoelastic NiTi shape memory alloys (SMAs) during the solid-state phase transition. Spherical hardness is increased with depths during the phase transition in NiTi SMAs. This behaviour is contrary to the decrease in the hardness of NiTi SMAs with depths using sharp tips and the depth-insensitive hardness of traditional metallic alloys using spherical tips. In contrast with the common dislocation theory for the hardness measurement, the nature of NiTi SMAs' hardness is explained by the balance between the interface and the bulk energy of phase transformed SMAs. Contrary to the energy balance in the indentation zone using sharp tips, the interface energy was numerically shown to be less dominant than the bulk energy of the phase transition zone using spherical tips.

Ultra-wideline 14N solid-state NMR as a method for differentiating polymorphs: glycine as a case study

Nitrogen-14 solid-state NMR (SSNMR) is utilized to differentiate three polymorphic forms and a hydrochloride (HCl) salt of the amino acid glycine. Frequency-swept Wideband, Uniform Rate, Smooth Truncated (WURST) pulses were used in conjunction with Carr-Purcell Meiboom-Gill refocusing, in the form of the WURST-CPMG pulse sequence, for all spectral acquisitions. The ¹⁴N quadrupolar interaction is shown to be very sensitive to variations in the local electric field gradients (EFGs) about the ¹⁴N nucleus; hence, differentiation of the samples is accomplished through determination of the quadrupolar parameters CQ and ηQ, which are obtained from analytical simulations of the ¹⁴N SSNMR powder patterns of stationary samples (i.e., static NMR spectra). Additionally, differentiation of the polymorphs is also possible via the measurement of ¹⁴N effective transverse relaxation time constants, T^eff2(¹⁴N). Plane-wave density functional theory (DFT) calculations, which exploit the periodicity of crystal lattices, are utilized to confirm the experimentally determined quadrupolar parameters as well as to determine the orientation of the ¹⁴N EFG tensors in the molecular frames. Several signal-enhancement techniques are also discussed to help improve the sensitivity of the ¹⁴N SSNMR acquisition method, including the use of selective deuteration, the application of the BRoadband Adiabatic INversion Cross-Polarization (BRAIN-CP) technique, and the use of variable-temperature (VT) experiments. Finally, we examine several cases where ¹⁴N VT experiments employing Carr-Purcell-Meiboom-Gill (CPMG) refocusing are used to approximate the rotational energy barriers for RNH3⁺ groups.

Prevalence of the thioamide {···H-N-C=S}2 synthon-solid-state (X-ray crystallography), solution (NMR) and gas-phase (theoretical) structures of O-methyl-N-aryl-thiocarbamides

Structural investigations, i.e. solid-state (X-ray), solution (¹H NMR) and gas-phase (theoretical), on molecules with the general formula MeOC(S)N(H)C₆H₄-4-Y: Y = H (1), NO₂ (2), C(O)Me (3), Cl (4) have shown a general preference for the adoption of an E-conformation about the central C–N bond. Such a conformation allows for the formation of a dimeric hydrogen-bonded {H–N–C=S}₂ synthon as the building block. In the cases of 1–3, additional C–H^...O interactions give rise to the formation of tapes of varying topology. A theoretical analysis shows that the preference for the E-conformation is about the same as the crystal packing stabilisation energy and consistent with this, the compound with Y = C(O)OMe, (5), adopts a Z-conformation in the solid-state that facilitates the formation of N–H^...O, C–H^...O and C–H^...S interactions, leading to a layer structure. Global crystal packing considerations are shown to be imperative in dictating the conformational form of molecules 1–5.

Properties of mechanically milled and spark plasma sintered Al–15 at.% MgB2 composite materials

Air-atomized pure aluminium powder with 15 at.% MgB₂ was mechanically milled (MMed) by using a vibrational ball mill, and MMed powders were consolidated by spark plasma sintering (SPS) to produce composite materials with high specific strength. Solid-state reactions of MMed powders have been examined by X-ray diffraction (XRD), and mechanical properties of the SPSed materials have been evaluated by hardness measurements and compression tests. Orientation images of microstructures were obtained via the electron backscatter diffraction (EBSD) technique.

The solid-state reactions in the Al–15 at.% MgB₂ composite materials occurred between the MMed powders and process control agent (PCA) after heating at 773–873 K for 24 h. The products of the solid-state reaction were a combination of AlB₂, Al₃BC and spinel MgAl₂O₄. Mechanical milling (MM) processing time and heating temperatures affect the characteristics of those intermetallic compounds. As the result of the solid-state reactions in MMed powders, a hardness increase was observed in MMed powders after heating at 573–873 K for 24 h. The full density was attained for the SPSed materials from 4 h or 8 h MMed powders in the Al–15 at.% MgB₂ composite materials under an applied pressure of 49 MPa at 873 K for 1 h. The microstructure of the SPSed materials fabricated from the MMed powders presented the bimodal aluminium matrix grain structure with the randomly distributions. The Al–15 at.% MgB₂SPSed material from powder MMed for 8 h exhibited the highest compressive 0.2% proof strength of 846 MPa at room temperature.

Mechanochemical synthesis of nanoparticulate ZnO–ZnWO4 powders and their photocatalytic activity

In this study, mechanochemical reaction systems with H₂WO₄ as a precursor were investigated for the synthesis of nanoparticulate powders of WO₃, ZnWO₄, and dual-phase (ZnWO₄)_x(ZnO)_1–x. The objective was to establish whether mechanochemical processing can be used to manufacture high activity photocatalysts in the ZnO–WO₃ system. Milling and heat treatment of H₂WO₄ + 12NaCl was found to result in the formation of irregularly shaped platelets of a sodium tungstate rather than nanoparticles of WO₃. Powders of single-phase ZnWO₄ and dual-phase (ZnWO₄)_x(ZnO)_1–x were successfully synthesised by incorporating H₂WO₄ into the ZnCl₂ + Na₂CO₃ + 4NaCl reactant mixture. The photocatalytic activity of these powders was evaluated using the spin-trapping technique with electron paramagnetic resonance spectroscopy. It was found that the photocatalytic activity decreased with the ZnWO₄ content. This decrease in activity was attributed to the larger average particle size of the ZnWO₄ component compared to the ZnO, which reduced the surface area available for interfacial transfer of the photogenerated charge carriers.

Solid state recycling of 5083 Al alloy by hot extrusion

The machined chips of 5083 Al alloy were recycled by hot extrusion at 723 K with an extrusion ratio of 44:1 in air. Corrosion and mechanical properties of the recycled specimens have been compared with those of a virgin extrusion which was processed from the ingot block. As a result of salt immersion tests, mass loss of the recycled specimen was not less than twice of that of the virgin extrusion. The deterioration in corrosion properties for the recycled specimen was attributed to the excessive contamination of Fe which promoted galvanic corrosion. As a result of tensile tests, the recycled specimen exhibited a good combination of high strength and high elongation to failure at room temperature. The excellent mechanical properties for the recycled specimen were attributed to the refined microstructure. However, the elongation to failure of the recycled specimen at elevated temperatures more than 573 K was lower than that of the virgin extrusion. The contamination of oxide particles is likely to be responsible for the lower elongation in the solid recycled specimen.